- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 5 | 2 | 51-6091.00 | Extruding and Forming Machine Setters, Operators, and Tenders, Synthetic and Glass Fibers |
| 1 | 4 | 2 | 51-9032.00 | Cutting and Slicing Machine Setters, Operators, and Tenders |
| 1 | 3 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-9012.00 | Separating, Filtering, Clarifying, Precipitating, and Still Machine Setters, Operators, and Tenders |
| 1 | 3 | 3 | 51-8021.00 | Stationary Engineers and Boiler Operators |
| 1 | 2 | 2 | 51-8013.00 | Power Plant Operators |
| 1 | 1 | 2 | 51-8013.03 | Biomass Plant Technicians |
| 1 | 1 | 2 | 51-8099.01 | Biofuels Processing Technicians |
| 1 | 1 | 2 | 51-9021.00 | Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-9198.00 | Helpers--Production Workers |
- Turn petcocks to adjust the flow of binding fluid to sleeves.
- Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.
- Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.
- Press metering-pump buttons and turn valves to stop flow of polymers.
- Turn rheostats to obtain specified temperatures in electric furnaces where glass is melted.
- Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.
- Press buttons to stop machines when processes are complete or when malfunctions are detected.
- Notify other workers of defects, and direct them to adjust extruding and forming machines.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Move controls to activate and adjust extruding and forming machines.
- Record details of machine malfunctions.
- Clean and maintain extruding and forming machines, using hand tools.
- Remove polymer deposits from spinnerettes and equipment, using silicone spray, brass chisels, and bronze-wool pads.
- Record operational data on tags, and attach tags to machines.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Remove excess, entangled, or completed filaments from machines, using hand tools.
- Wipe finish rollers with cloths and wash finish trays with water when necessary.
- Lower pans inside cabinets to catch molten filaments until flow of polymer through packs has stopped.
- Open cabinet doors to cut multifilament threadlines away from guides, using scissors.
- Pull extruded fiberglass filaments over sleeves where binding solution is applied, and into grooves of graphite shoes that bind filaments into single strands of sliver.
- Pass sliver strands through openings in floors to workers on floors below who wind slivers onto tubes.
- Turn petcocks to adjust the flow of binding fluid to sleeves.
- Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.
- Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.
- Press metering-pump buttons and turn valves to stop flow of polymers.
- Turn rheostats to obtain specified temperatures in electric furnaces where glass is melted.
- Start pumps to circulate water and abrasives onto blades or cables during cutting.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
- Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
- Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
- Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
- Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
- Start machines to verify setups, and make any necessary adjustments.
- Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels.
- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
- Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
- Adjust machine controls to alter position, alignment, speed, or pressure.
- Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
- Maintain production records, such as quantities, types, and dimensions of materials produced.
- Position stock along cutting lines, or against stops on beds of scoring or cutting machines.
- Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.
- Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
- Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
- Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
- Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
- Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
- Direct workers on cutting teams.
- Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
- Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
- Tighten pulleys or add abrasives to maintain cutting speeds.
- Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
- Wash stones, using water hoses.
- Start pumps to circulate water and abrasives onto blades or cables during cutting.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Turn valves to pump sterilizing solutions or rinse water through pipes or equipment or to spray vats with atomizers.
- Turn valves or move controls to admit, drain, separate, filter, clarify, mix, or transfer materials.
- Set up or adjust machine controls to regulate conditions such as material flow, temperature, or pressure.
- Dump, pour, or load specified amounts of refined or unrefined materials into equipment or containers for further processing or storage.
- Operate machines to process materials in compliance with applicable safety, energy, or environmental regulations.
- Monitor material flow or instruments, such as temperature or pressure gauges, indicators, or meters, to ensure optimal processing conditions.
- Examine samples to verify qualities such as clarity, cleanliness, consistency, dryness, or texture.
- Start agitators, shakers, conveyors, pumps, or centrifuge machines.
- Inspect machines or equipment for hazards, operating efficiency, malfunctions, wear, or leaks.
- Collect samples of materials or products for laboratory analysis.
- Communicate processing instructions to other workers.
- Maintain logs of instrument readings, test results, or shift production for entry in computer databases.
- Remove clogs, defects, or impurities from machines, tanks, conveyors, screens, or other processing equipment.
- Clean or sterilize tanks, screens, inflow pipes, production areas, or equipment, using hoses, brushes, scrapers, or chemical solutions.
- Measure or weigh materials to be refined, mixed, transferred, stored, or otherwise processed.
- Test samples to determine viscosity, acidity, specific gravity, or degree of concentration, using test equipment such as viscometers, pH meters, or hydrometers.
- Install, maintain, or repair hoses, pumps, filters, or screens to maintain processing equipment, using hand tools.
- Connect pipes between vats and processing equipment.
- Assemble fittings, valves, bowls, plates, disks, impeller shafts, or other parts to prepare equipment for operation.
- Remove full containers from discharge outlets and replace them with empty containers.
- Pack bottles into cartons or crates, using machines.
- Turn valves to pump sterilizing solutions or rinse water through pipes or equipment or to spray vats with atomizers.
- Turn valves or move controls to admit, drain, separate, filter, clarify, mix, or transfer materials.
- Set up or adjust machine controls to regulate conditions such as material flow, temperature, or pressure.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
- Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
- Develop operation, safety, and maintenance procedures or assist in their development.
- Test electrical systems to determine voltages, using voltage meters.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Weigh, measure, and record fuel used.
- Receive instructions from steam engineers regarding steam plant and air compressor operations.
- Install burners and auxiliary equipment, using hand tools.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
- Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
- Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
- Investigate and report on accidents.
- Ignite fuel in burners, using torches or flames.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Verify that well field monitoring data conforms to applicable regulations.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Calibrate liquid flow devices or meters, including fuel, chemical, and water meters.
- Operate biomass fuel-burning boiler or biomass fuel gasification system equipment in accordance with specifications or instructions.
- Perform tests of water chemistry in boilers.
- Operate high-pressure steam boiler or water chiller equipment for electrical cogeneration operations.
- Operate equipment to heat biomass, using knowledge of controls, combustion, and firing mechanisms.
- Operate equipment to start, stop, or regulate biomass-fueled generators, generator units, boilers, engines, or auxiliary systems.
- Inspect biomass power plant or processing equipment, recording or reporting damage and mechanical problems.
- Record or report operational data, such as readings on meters, instruments, and gauges.
- Operate valves, pumps, engines, or generators to control and adjust production of biofuels or biomass-fueled power.
- Calculate, measure, load, or mix biomass feedstock for power generation.
- Clean work areas to ensure compliance with safety regulations.
- Perform routine maintenance or make minor repairs to mechanical, electrical, or electronic equipment in biomass plants.
- Measure and monitor raw biomass feedstock, including wood, waste, or refuse materials.
- Assess quality of biomass feedstock.
- Read and interpret instruction manuals or technical drawings related to biomass-fueled power or biofuels production equipment or processes.
- Operate heavy equipment, such as bulldozers and front-end loaders.
- Preprocess feedstock to prepare for biochemical or thermochemical production processes.
- Manage parts and supply inventories for biomass plants.
- Calibrate liquid flow devices or meters, including fuel, chemical, and water meters.
- Calibrate liquid flow devices and meters, including fuel, chemical, and water meters.
- Monitor batch, continuous flow, or hybrid biofuels production processes.
- Operate valves, pumps, engines, or generators to control and adjust biofuels production.
- Monitor and record biofuels processing data.
- Collect biofuels samples and perform routine laboratory tests or analyses to assess biofuels quality.
- Operate equipment, such as a centrifuge, to extract biofuels products and secondary by-products or reusable fractions.
- Process refined feedstock with additives in fermentation or reaction process vessels.
- Operate chemical processing equipment for the production of biofuels.
- Monitor and record flow meter performance.
- Inspect biofuels plant or processing equipment regularly, recording or reporting damage and mechanical problems.
- Measure and monitor raw biofuels feedstock.
- Preprocess feedstock in preparation for physical, chemical, or biological fuel production processes.
- Calculate, measure, load, or mix refined feedstock used in biofuels production.
- Monitor stored biofuels products or secondary by-products until reused or transferred to users.
- Assess the quality of biofuels additives for reprocessing.
- Clean biofuels processing work area, ensuring compliance with safety regulations.
- Perform routine maintenance on mechanical, electrical, or electronic equipment or instruments used in the processing of biofuels.
- Rebuild, repair, or replace biofuels processing equipment components.
- Coordinate raw product sourcing or collection.
- Calibrate liquid flow devices and meters, including fuel, chemical, and water meters.
- Turn valves to regulate the moisture contents of materials.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Examine materials, ingredients, or products, visually or with hands, to ensure conformance to established standards.
- Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
- Clean, adjust, and maintain equipment, using hand tools.
- Weigh or measure materials, ingredients, or products at specified intervals to ensure conformance to requirements.
- Read work orders to determine production specifications and information.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Tend accessory equipment, such as pumps and conveyors, to move materials or ingredients through production processes.
- Record data from operations, testing, and production on specified forms.
- Load materials into machinery and equipment, using hand tools.
- Clean work areas.
- Notify supervisors of needed repairs.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Reject defective products and readjust equipment to eliminate problems.
- Inspect chains, belts, or scrolls for signs of wear.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Collect samples of materials or products for laboratory testing.
- Set mill gauges to specified fineness of grind.
- Mark bins as to types of mixtures stored.
- Add or mix chemicals and ingredients for processing, using hand tools or other devices.
- Break mixtures to size, using picks.
- Turn valves to regulate the moisture contents of materials.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Mark or tag identification on parts.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Change machine gears, using wrenches.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Wash work areas, machines, equipment, vehicles, or products.
- Fold products and product parts during processing.
- Break up defective products for reprocessing.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Cut or break flashing from materials or products.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
