Timing Device Assemblers and Adjusters
51-2061.00

Perform precision assembling or adjusting, within narrow tolerances, of timing devices such as digital clocks or timing devices with electrical or electronic components.

Sample of reported job titles: Calibration Specialist, Calibrator, Clockmaker, Horologist, Time Stamp Assembler, Watch Technician, Watchmaker

Occupation-Specific Information

Tasks

  • Assemble and install components of timepieces to complete mechanisms, using watchmakers' tools and loupes.
  • Observe operation of timepiece parts and subassemblies to determine accuracy of movement, and to diagnose causes of defects.
  • Test operation and fit of timepiece parts and subassemblies, using electronic testing equipment, tweezers, watchmakers' tools, and loupes.
  • Replace specified parts to repair malfunctioning timepieces, using watchmakers' tools, loupes, and holding fixtures.
  • Disassemble timepieces such as watches, clocks, and chronometers so that repairs can be made.
  • Clean and lubricate timepiece parts and assemblies, using solvents, buff sticks, and oil.
  • Examine components of timepieces such as watches, clocks, or chronometers for defects, using loupes or microscopes.
  • Bend parts, such as hairsprings, pallets, barrel covers, and bridges, to correct deficiencies in truing or endshake, using tweezers.
  • Change timing weights on balance wheels to correct deficient timing.
  • Adjust sizes or positioning of timepiece parts to achieve specified fit or function, using calipers, fixtures, and loupes.
  • Mount hairsprings and balance wheel assemblies between jaws of truing calipers.
  • Estimate spaces between collets and first inner coils to determine if spaces are within acceptable limits.
  • Bend inner coils of springs away from or toward collets, using tweezers, to locate centers of collets in centers of springs, and to correct errors resulting from faulty colleting of coils.
  • Turn wheels of calipers and examine springs, using loupes, to determine if center coils appear as perfect circles.
  • Examine and adjust hairspring assemblies to ensure horizontal and circular alignment of hairsprings, using calipers, loupes, and watchmakers' tools.
  • Review blueprints, sketches, or work orders to gather information about tasks to be completed.
  • Tighten or replace loose jewels, using watchmakers' tools.

back to top

Technology Skills

Hot technology Hot Technologies are requirements frequently included in employer job postings.

back to top

Occupational Requirements

Work Activities

  • Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
  • Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
  • Inspecting Equipment, Structures, or Materials — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
  • Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems.
  • Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
  • Communicating with Supervisors, Peers, or Subordinates — Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
  • Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
  • Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
  • Thinking Creatively — Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
  • Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job.
  • Analyzing Data or Information — Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
  • Organizing, Planning, and Prioritizing Work — Developing specific goals and plans to prioritize, organize, and accomplish your work.
  • Judging the Qualities of Objects, Services, or People — Assessing the value, importance, or quality of things or people.
  • Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
  • Monitoring Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.

back to top

Detailed Work Activities

back to top

Work Context

back to top

Experience Requirements

Job Zone

Title
Job Zone Two: Some Preparation Needed
Education
These occupations usually require a high school diploma.
Related Experience
Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
Job Training
Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples
These occupations often involve using your knowledge and skills to help others. Examples include orderlies, counter and rental clerks, customer service representatives, security guards, upholsterers, and tellers.
SVP Range
3 months to 1 year of preparation (4.0 to < 6.0)

back to top

Training & Credentials

State training
Local training
Certifications
Apprenticeships
Have a career path or location in mind? Visit Apprenticeship.gov external site to find apprenticeship opportunities near you.

back to top

Worker Requirements

Skills

  • Repairing — Repairing machines or systems using the needed tools.
  • Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
  • Troubleshooting — Determining causes of operating errors and deciding what to do about it.
  • Operations Monitoring — Watching gauges, dials, or other indicators to make sure a machine is working properly.

back to top

Knowledge

  • Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

back to top

Education

How much education does a new hire need to perform a job in this occupation? Respondents said:

  • 91%
     
    responded: High school diploma or equivalent requiredmore info
  • 4%
     
    responded: Professional degree requiredmore info
  • 2%
     
    responded: Less than high school diploma required

back to top

Worker Characteristics

Abilities

  • Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
  • Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
  • Near Vision — The ability to see details at close range (within a few feet of the observer).
  • Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
  • Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
  • Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
  • Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
  • Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
  • Category Flexibility — The ability to generate or use different sets of rules for combining or grouping things in different ways.
  • Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense.
  • Oral Expression — The ability to communicate information and ideas in speaking so others will understand.
  • Visual Color Discrimination — The ability to match or detect differences between colors, including shades of color and brightness.

back to top

Interests

Interest code: RC
Want to discover your interests? Take the O*NET Interest Profiler at My Next Move.
  • Realistic — Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outside, and do not involve a lot of paperwork or working closely with others.
  • Conventional — Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.

back to top

Work Values

  • Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
  • Working Conditions — Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.
  • Achievement — Occupations that satisfy this work value are results oriented and allow employees to use their strongest abilities, giving them a feeling of accomplishment. Corresponding needs are Ability Utilization and Achievement.

back to top

Work Styles

  • Attention to Detail — Job requires being careful about detail and thorough in completing work tasks.
  • Integrity — Job requires being honest and ethical.
  • Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations.
  • Independence — Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.
  • Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace.
  • Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
  • Persistence — Job requires persistence in the face of obstacles.
  • Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
  • Self-Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
  • Initiative — Job requires a willingness to take on responsibilities and challenges.
  • Innovation — Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.
  • Analytical Thinking — Job requires analyzing information and using logic to address work-related issues and problems.
  • Stress Tolerance — Job requires accepting criticism and dealing calmly and effectively with high-stress situations.
  • Leadership — Job requires a willingness to lead, take charge, and offer opinions and direction.

back to top

Workforce Characteristics

Wages & Employment Trends

Median wages (2021)
$18.16 hourly, $37,780 annual
State wages
Local wages
Employment (2020)
1,000 employees
Projected growth (2020-2030)
Decline (-1% or lower)
Projected job openings (2020-2030)
100
State trends
Top industries (2020)

Source: Bureau of Labor Statistics 2021 wage data external site and 2020-2030 employment projections external site . “Projected growth” represents the estimated change in total employment over the projections period (2020-2030). “Projected job openings” represent openings due to growth and replacement.

back to top

Job Openings on the Web

State job openings
Local job openings

back to top

More Information

back to top

Sources of Additional Information

Disclaimer: Sources are listed to provide additional information on related jobs, specialties, and/or industries. Links to non-DOL Internet sites are provided for your convenience and do not constitute an endorsement.

back to top