- Sharpen cutting or grinding tools.
Occupations with related activities Save Table: XLSX CSV
| Shared Activities | Similar Activities | Job Zone | Code | Occupation |
| 1 | 2 | 2 | 51-7042.00 | Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
| 1 | 2 | 2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 1 | 2 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-4022.00 | Forging Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-9032.00 | Cutting and Slicing Machine Setters, Operators, and Tenders |
| 1 | 1 | 3 | 49-2092.00 | Electric Motor, Power Tool, and Related Repairers |
| 1 | 0 | 2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 0 | 2 | 51-4035.00 | Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 0 | 2 | 51-4034.00 | Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 0 | 1 | 51-9031.00 | Cutters and Trimmers, Hand |
| 1 | 0 | 3 | 51-9071.06 | Gem and Diamond Workers |
- Sharpen cutting or grinding tools.
- Maintain production or processing equipment.
- Lubricate production equipment.
- Operate woodworking equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Conduct test runs of production equipment.
- Monitor equipment operation to ensure that products are not flawed.
- Set equipment controls to meet cutting specifications.
- Inspect lumber or raw woodstock.
- Mount attachments or tools onto production equipment.
- Determine production equipment settings.
- Feed materials or products into or through equipment.
- Select production input materials.
- Maneuver workpieces in equipment during production.
- Select production equipment according to product specifications.
- Load materials into production equipment.
- Mount materials or workpieces onto production equipment.
- Remove accessories, tools, or other parts from equipment.
- Replace worn equipment components.
- Mark products, workpieces, or equipment with identifying information.
- Stack finished items for further processing or shipment.
- Inspect production equipment.
- Clean production equipment.
- Clean work areas.
- Set equipment guides, stops, spacers, or other fixtures.
- Trim excess material from workpieces.
- Remove products or workpieces from production equipment.
- Program equipment to perform production tasks.
- Operate cranes, hoists, or other moving or lifting equipment.
- Sharpen cutting or grinding tools.
- Maintain production or processing equipment.
- Lubricate production equipment.
- Sharpen cutting or grinding tools.
- Clear equipment jams.
- Lubricate production equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Set equipment controls to meet cutting specifications.
- Mount attachments or tools onto production equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Inspect lumber or raw woodstock.
- Trim excess material from workpieces.
- Monitor equipment operation to ensure proper functioning.
- Replace worn equipment components.
- Operate cutting equipment.
- Maneuver workpieces in equipment during production.
- Count finished products or workpieces.
- Sort materials or products for processing, storing, shipping, or grading.
- Stack finished items for further processing or shipment.
- Mount materials or workpieces onto production equipment.
- Position raw materials on processing or production equipment.
- Measure materials to mark reference points, cutting lines, or other indicators.
- Operate woodworking equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Select production input materials.
- Study blueprints or other instructions to determine equipment setup requirements.
- Cut industrial materials in preparation for fabrication or processing.
- Shape metal workpieces with hammers or other small hand tools.
- Remove products or workpieces from production equipment.
- Clean production equipment.
- Dispose of trash or waste materials.
- Lift materials or workpieces using cranes or other lifting equipment.
- Sharpen cutting or grinding tools.
- Clear equipment jams.
- Lubricate production equipment.
- Sharpen cutting or grinding tools.
- Lubricate production equipment.
- Apply lubricants or coolants to workpieces.
- Set equipment guides, stops, spacers, or other fixtures.
- Inspect metal, plastic, or composite products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Sort materials or products for processing, storing, shipping, or grading.
- Operate cutting equipment.
- Monitor equipment operation to ensure that products are not flawed.
- Record operational or production data.
- Mount attachments or tools onto production equipment.
- Inspect production equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Mount materials or workpieces onto production equipment.
- Align parts or workpieces to ensure proper assembly.
- Load materials into production equipment.
- Operate metal or plastic forming equipment.
- Clean production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Set equipment controls to meet cutting specifications.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Clean work areas.
- Plan production or operational procedures or sequences.
- Operate forklifts or other loaders.
- Adjust equipment controls to regulate coolant flow.
- Feed materials or products into or through equipment.
- Operate grinding equipment.
- Disassemble equipment for maintenance or repair.
- Remove accessories, tools, or other parts from equipment.
- Replace worn equipment components.
- Smooth metal surfaces or edges.
- Cut industrial materials in preparation for fabrication or processing.
- Select production equipment according to product specifications.
- Heat material or workpieces to prepare for or complete production.
- Sharpen cutting or grinding tools.
- Lubricate production equipment.
- Apply lubricants or coolants to workpieces.
- Sharpen cutting or grinding tools.
- Maintain production or processing equipment.
- Study blueprints or other instructions to determine equipment setup requirements.
- Maneuver workpieces in equipment during production.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Operate metal or plastic forming equipment.
- Operate cutting equipment.
- Mount attachments or tools onto production equipment.
- Remove accessories, tools, or other parts from equipment.
- Conduct test runs of production equipment.
- Exchange information with colleagues.
- Trim excess material from workpieces.
- Repair production equipment or tools.
- Replace worn equipment components.
- Select production equipment according to product specifications.
- Set equipment guides, stops, spacers, or other fixtures.
- Operate grinding equipment.
- Sharpen cutting or grinding tools.
- Maintain production or processing equipment.
- Sharpen cutting or grinding tools.
- Lubricate production equipment.
- Operate cutting equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Study blueprints or other instructions to determine equipment setup requirements.
- Weigh finished products.
- Conduct test runs of production equipment.
- Feed materials or products into or through equipment.
- Operate cranes, hoists, or other moving or lifting equipment.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Mark products, workpieces, or equipment with identifying information.
- Remove products or workpieces from production equipment.
- Stack finished items for further processing or shipment.
- Sort materials or products for processing, storing, shipping, or grading.
- Watch operating equipment to detect malfunctions.
- Set equipment controls to meet cutting specifications.
- Record operational or production data.
- Adjust equipment controls to regulate flow of water, cleaning solutions, or other liquids.
- Move products, materials, or equipment between work areas.
- Position raw materials on processing or production equipment.
- Enter commands, instructions, or specifications into equipment.
- Mount attachments or tools onto production equipment.
- Replace worn equipment components.
- Set equipment guides, stops, spacers, or other fixtures.
- Select production equipment according to product specifications.
- Direct operational or production activities.
- Operate grinding equipment.
- Cut industrial materials in preparation for fabrication or processing.
- Clean production equipment.
- Clean materials to prepare them for production.
- Sharpen cutting or grinding tools.
- Lubricate production equipment.
- Sharpen cutting or grinding tools.
- Lubricate equipment to allow proper functioning.
- Inspect mechanical equipment to locate damage, defects, or wear.
- Read work orders or descriptions of problems to determine repairs or modifications needed.
- Adjust equipment to ensure optimal performance.
- Reassemble equipment after repair.
- Communicate with coworkers to coordinate installations or repairs.
- Operate cranes, hoists, or other moving or lifting equipment.
- Measure equipment outputs.
- Rebuild parts or components.
- Repair defective engines or engine components.
- Maintain repair or maintenance records.
- Disassemble equipment for maintenance or repair.
- Clean equipment, parts, or tools to repair or maintain them in good working order.
- Inspect electrical or electronic systems for defects.
- Read technical information needed to perform maintenance or repairs.
- Smooth surfaces of objects or equipment.
- Test mechanical equipment to ensure proper functioning.
- Cut materials according to specifications or needs.
- Install insulation in equipment or structures.
- Maintain inventories of materials, equipment, or products.
- Assemble electrical components, subsystems, or systems.
- Solder parts or connections between parts.
- Repair electrical components.
- Rewire electrical or electronic systems.
- Seal gaps or cracks to prevent leakage or moisture intrusion.
- Test electrical circuits or components for proper functioning.
- Braze metal parts or components.
- Fabricate parts or components.
- Prepare compounds or solutions to be used for repairs.
- Remove parts or components from equipment.
- Replace worn, damaged, or defective mechanical parts.
- Remove dents from equipment, materials, tools or structures.
- Repair electronic equipment.
- Bolt objects into place.
- Level machines or equipment.
- Sharpen cutting or grinding tools.
- Lubricate equipment to allow proper functioning.
- Sharpen cutting or grinding tools.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Study blueprints or other instructions to determine equipment setup requirements.
- Drill holes in parts, equipment, or materials.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Align parts or workpieces to ensure proper assembly.
- Replace worn equipment components.
- Set equipment controls to meet cutting specifications.
- Mount materials or workpieces onto production equipment.
- Watch operating equipment to detect malfunctions.
- Lift materials or workpieces using cranes or other lifting equipment.
- Signal others to coordinate work activities.
- Adjust equipment controls to regulate coolant flow.
- Mount attachments or tools onto production equipment.
- Assemble metal or plastic parts or products.
- Operate grinding equipment.
- Sharpen cutting or grinding tools.
- Sharpen cutting or grinding tools.
- Remove products or workpieces from production equipment.
- Set equipment controls to meet cutting specifications.
- Align parts or workpieces to ensure proper assembly.
- Mount attachments or tools onto production equipment.
- Monitor equipment operation to ensure that products are not flawed.
- Select production equipment according to product specifications.
- Mount materials or workpieces onto production equipment.
- Operate grinding equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Replace worn equipment components.
- Review blueprints or other instructions to determine operational methods or sequences.
- Calculate dimensions of workpieces, products, or equipment.
- Feed materials or products into or through equipment.
- Determine production equipment settings.
- Record operational or production data.
- Construct patterns, templates, or other work aids.
- Adjust equipment controls to regulate coolant flow.
- Sharpen cutting or grinding tools.
- Sharpen cutting or grinding tools.
- Operate metal or plastic forming equipment.
- Operate grinding equipment.
- Replace worn equipment components.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Monitor equipment operation to ensure that products are not flawed.
- Operate cutting equipment.
- Mount attachments or tools onto production equipment.
- Conduct test runs of production equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Set equipment controls to meet cutting specifications.
- Install mechanical components in production equipment.
- Perform basic equipment maintenance.
- Calculate dimensions of workpieces, products, or equipment.
- Feed materials or products into or through equipment.
- Lift materials or workpieces using cranes or other lifting equipment.
- Mount materials or workpieces onto production equipment.
- Adjust equipment controls to regulate coolant flow.
- Sharpen cutting or grinding tools.
- Sharpen cutting or grinding tools.
- Mark products, workpieces, or equipment with identifying information.
- Trim excess material from workpieces.
- Cut industrial materials in preparation for fabrication or processing.
- Measure materials to mark reference points, cutting lines, or other indicators.
- Position patterns on equipment, materials, or workpieces.
- Shape metal workpieces with hammers or other small hand tools.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Mount materials or workpieces onto production equipment.
- Sort materials or products for processing, storing, shipping, or grading.
- Adjust fabrics or other materials during garment production.
- Operate cutting equipment.
- Stack finished items for further processing or shipment.
- Replace worn equipment components.
- Set equipment controls to meet cutting specifications.
- Count finished products or workpieces.
- Weigh finished products.
- Operate grinding equipment.
- Clean workpieces or finished products.
- Polish materials, workpieces, or finished products.
- Move products, materials, or equipment between work areas.
- Sharpen cutting or grinding tools.
- Sharpen cutting or grinding tools.
- Examine physical characteristics of gemstones or precious metals.
- Evaluate quality of materials or products.
- Determine the value of goods or services.
- Operate grinding equipment.
- Maneuver workpieces in equipment during production.
- Sort materials or products for processing, storing, shipping, or grading.
- Mount materials or workpieces onto production equipment.
- Record operational or production data.
- Advise others on ways to improve processes or products.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Operate cutting equipment.
- Polish materials, workpieces, or finished products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Apply solutions to production equipment.
- Mix substances to create chemical solutions.
- Select production equipment according to product specifications.
- Cut industrial materials in preparation for fabrication or processing.
- Drill holes in parts, equipment, or materials.
- Replace worn equipment components.
- Solder parts or workpieces.
- Disassemble equipment for maintenance or repair.
- Sharpen cutting or grinding tools.
