- Participate in training or continuing education activities to stay abreast of engineering or industry advances.
Occupations with related tasks Save Table: XLSX CSV
- Attend workshops, seminars, or conferences to present or obtain information regarding fire prevention and protection.
- Advise architects, builders, and other construction personnel on fire prevention equipment and techniques and on fire code and standard interpretation and compliance.
- Inspect buildings or building designs to determine fire protection system requirements and potential problems in areas such as water supplies, exit locations, and construction materials.
- Prepare and write reports detailing specific fire prevention and protection issues, such as work performed, revised codes or standards, and proposed review schedules.
- Consult with authorities to discuss safety regulations and to recommend changes as necessary.
- Direct the purchase, modification, installation, testing, maintenance, and operation of fire prevention and protection systems.
- Determine causes of fires and ways in which they could have been prevented.
- Develop plans for the prevention of destruction by fire, wind, and water.
- Develop training materials and conduct training sessions on fire protection.
- Design fire detection equipment, alarm systems, and fire extinguishing devices and systems.
- Evaluate fire department performance and the laws and regulations affecting fire prevention or fire safety.
- Study the relationships between ignition sources and materials to determine how fires start.
- Conduct research on fire retardants and the fire safety of materials and devices.
- Attend workshops, seminars, or conferences to present or obtain information regarding fire prevention and protection.
- Attend conferences, workshops, or other training sessions to learn about new tools or methods.
- Analyze test data to identify defects or determine calibration requirements.
- Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.
- Conduct calibration tests to determine performance or reliability of mechanical, structural, or electromechanical equipment.
- Develop new calibration methods or techniques based on measurement science, analyses, or calibration requirements.
- Disassemble and reassemble equipment for inspection.
- Draw plans for developing jigs, fixtures, instruments, or other devices.
- Maintain or repair measurement devices or equipment used for calibration testing.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Order replacement parts for malfunctioning equipment.
- Plan sequences of calibration tests according to equipment specifications and scientific principles.
- Read blueprints, schematics, diagrams, or technical orders.
- Verify part dimensions or clearances using precision measuring instruments to ensure conformance to specifications.
- Visually inspect equipment to detect surface defects.
- Write and submit reports about the results of calibration tests.
- Attend conferences, workshops, or other training sessions to learn about new tools or methods.
- Read scientific articles, conference papers, or other sources of research to identify emerging analytic trends and technologies.
- Analyze, manipulate, or process large sets of data using statistical software.
- Apply feature selection algorithms to models predicting outcomes of interest, such as sales, attrition, and healthcare use.
- Apply sampling techniques to determine groups to be surveyed or use complete enumeration methods.
- Clean and manipulate raw data using statistical software.
- Create graphs, charts, or other visualizations to convey the results of data analysis using specialized software.
- Deliver oral or written presentations of the results of mathematical modeling and data analysis to management or other end users.
- Design surveys, opinion polls, or other instruments to collect data.
- Identify business problems or management objectives that can be addressed through data analysis.
- Identify relationships and trends or any factors that could affect the results of research.
- Identify solutions to business problems, such as budgeting, staffing, and marketing decisions, using the results of data analysis.
- Propose solutions in engineering, the sciences, and other fields using mathematical theories and techniques.
- Recommend data-driven solutions to key stakeholders.
- Test, validate, and reformulate models to ensure accurate prediction of outcomes of interest.
- Write new functions or applications in programming languages to conduct analyses.
- Compare models using statistical performance metrics, such as loss functions or proportion of explained variance.
- Read scientific articles, conference papers, or other sources of research to identify emerging analytic trends and technologies.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in technology, equipment, or systems.
- Analyze control or survey data to ensure adherence to project specifications or land survey standards.
- Conduct surveys to determine exact positions, measurement of points, elevations, lines, areas, volumes, contours, or other features of land surfaces.
- Calculate the exact horizontal and vertical position of points on the Earth's surface.
- Maintain databases of geodetic and related information, including coordinate, descriptive, or quality assurance data.
- Verify the mathematical correctness of newly collected survey data.
- Compute horizontal and vertical coordinates of control networks, using direct leveling or other geodetic survey techniques, such as triangulation, trilateration, and traversing, to establish features of the Earth's surface.
- Plan or direct the work of geodetic surveying staff, providing technical consultation as needed.
- Assess the quality of control data to determine the need for additional survey data for engineering, construction, or other projects.
- Distribute compiled geodetic data to government agencies or the general public.
- Request additional survey data when field collection errors occur or engineering surveying specifications are not maintained.
- Provide training and interpretation in the use of methods or procedures for observing and checking controls for geodetic and plane coordinates.
- Prepare progress or technical reports.
- Review existing standards, controls, or equipment used, recommending changes or upgrades as needed.
- Compute, retrace, or adjust existing surveys of features such as highway alignments, property boundaries, utilities, control and other surveys to match the ground elevation-dependent grids, geodetic grids, or property boundaries and to ensure accuracy and continuity of data used in engineering, surveying, or construction projects.
- Determine orientation of tracts of land, including position, boundaries, size, and shape, using theodolites, electronic distance-measuring equipment, satellite-based positioning equipment, land information systems, or other geodetic survey equipment.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in technology, equipment, or systems.
- Update knowledge and skills to keep up with rapid advancements in computer technology.
- Design and develop computer hardware and support peripherals, including central processing units (CPUs), support logic, microprocessors, custom integrated circuits, and printers and disk drives.
- Confer with engineering staff and consult specifications to evaluate interface between hardware and software and operational and performance requirements of overall system.
- Build, test, and modify product prototypes, using working models or theoretical models constructed with computer simulation.
- Write detailed functional specifications that document the hardware development process and support hardware introduction.
- Test and verify hardware and support peripherals to ensure that they meet specifications and requirements, by recording and analyzing test data.
- Direct technicians, engineering designers or other technical support personnel as needed.
- Provide technical support to designers, marketing and sales departments, suppliers, engineers and other team members throughout the product development and implementation process.
- Select hardware and material, assuring compliance with specifications and product requirements.
- Store, retrieve, and manipulate data for analysis of system capabilities and requirements.
- Analyze user needs and recommend appropriate hardware.
- Evaluate factors such as reporting formats required, cost constraints, and need for security restrictions to determine hardware configuration.
- Provide training and support to system designers and users.
- Monitor functioning of equipment and make necessary modifications to ensure system operates in conformance with specifications.
- Specify power supply requirements and configuration, drawing on system performance expectations and design specifications.
- Assemble and modify existing pieces of equipment to meet special needs.
- Analyze information to determine, recommend, and plan layout, including type of computers and peripheral equipment modifications.
- Recommend purchase of equipment to control dust, temperature, and humidity in area of system installation.
- Update knowledge and skills to keep up with rapid advancements in computer technology.
- Research latest products, technology, or design trends to stay current in the field.
- Prepare graphic representations or drawings of proposed plans or designs.
- Confer with clients, engineering personnel, or architects on landscape projects.
- Integrate existing land features or landscaping into designs.
- Inspect landscape work to ensure compliance with specifications, evaluate quality of materials or work, or advise clients or construction personnel.
- Analyze data on conditions such as site location, drainage, or structure location for environmental reports or landscaping plans.
- Develop marketing materials, proposals, or presentations to generate new work opportunities.
- Manage the work of subcontractors to ensure quality control.
- Present project plans or designs to public stakeholders, such as government agencies or community groups.
- Prepare site plans, specifications, or cost estimates for land development.
- Create landscapes that minimize water consumption such as by incorporating drought-resistant grasses or indigenous plants.
- Develop planting plans to help clients garden productively or to achieve particular aesthetic effects.
- Collaborate with estimators to cost projects, create project plans, or coordinate bids from landscaping contractors.
- Inspect proposed sites to identify structural elements of land areas or other important site information, such as soil condition, existing landscaping, or the proximity of water management facilities.
- Collaborate with architects or related professionals on whole building design to maximize the aesthetic features of structures or surrounding land and to improve energy efficiency.
- Prepare conceptual drawings, graphics, or other visual representations of land areas to show predicted growth or development of land areas over time.
- Design and integrate rainwater harvesting or gray and reclaimed water systems to conserve water into building or land designs.
- Provide follow-up consultations for clients to ensure landscape designs are maturing or developing as planned.
- Identify and select appropriate sustainable materials for use in landscape designs, such as recycled wood or recycled concrete boards for structural elements or recycled tires for playground bedding.
- Research latest products, technology, or design trends to stay current in the field.
- Keep abreast of developments and changes in the nuclear field by reading technical journals or by independent study and research.
- Initiate corrective actions or order plant shutdowns in emergency situations.
- Monitor nuclear facility operations to identify any design, construction, or operation practices that violate safety regulations and laws or could jeopardize safe operations.
- Design or develop nuclear equipment, such as reactor cores, radiation shielding, or associated instrumentation or control mechanisms.
- Examine accidents to obtain data for use in design of preventive measures.
- Direct operating or maintenance activities of nuclear power plants to ensure efficiency and conformity to safety standards.
- Recommend preventive measures to be taken in the handling of nuclear technology, based on data obtained from operations monitoring or from evaluation of test results.
- Write operational instructions to be used in nuclear plant operation or nuclear fuel or waste handling and disposal.
- Conduct environmental studies on topics such as nuclear power generation, nuclear waste disposal, or nuclear weapon deployment.
- Direct environmental compliance activities associated with nuclear plant operations or maintenance.
- Prepare environmental impact statements, reports, or presentations for regulatory or other agencies.
- Prepare technical reports of findings or recommendations, based on synthesized analyses of test results.
- Develop or contribute to the development of plans to remediate or restore environments affected by nuclear radiation, such as waste disposal sites.
- Conduct tests of nuclear fuel behavior and cycles or performance of nuclear machinery and equipment to optimize performance of existing plants.
- Design or oversee construction or operation of nuclear reactors, power plants, or nuclear fuels reprocessing and reclamation systems.
- Design or direct nuclear research projects to develop, test, modify, or discover new uses for theoretical models.
- Design fuel cycle models or processes to reduce the quantity of radioactive waste generated from nuclear activities.
- Consult with other scientists to determine parameters of experimentation or suitability of analytical models.
- Perform experiments that will provide information about acceptable methods of nuclear material usage, nuclear fuel reclamation, or waste disposal.
- Discuss construction project proposals with interested parties, such as vendors, contractors, or nuclear facility review boards.
- Keep abreast of developments and changes in the nuclear field by reading technical journals or by independent study and research.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of industry research about new technologies.
- Identify operational requirements for new systems to inform selection of technological solutions.
- Integrate tags, readers, or software in radio frequency identification device (RFID) designs.
- Perform systems analysis or programming of radio frequency identification device (RFID) technology.
- Test radio frequency identification device (RFID) software to ensure proper functioning.
- Select appropriate radio frequency identification device (RFID) tags and determine placement locations.
- Perform site analyses to determine system configurations, processes to be impacted, or on-site obstacles to technology implementation.
- Perform acceptance testing on newly installed or updated systems.
- Determine means of integrating radio frequency identification device (RFID) into other applications.
- Provide technical support for radio frequency identification device (RFID) technology.
- Collect data about existing client hardware, software, networking, or key business processes to inform implementation of radio frequency identification device (RFID) technology.
- Install, test, or maintain radio frequency identification device (RFID) systems.
- Test tags or labels to ensure readability.
- Determine usefulness of new radio frequency identification device (RFID) technologies.
- Verify compliance of developed applications with architectural standards and established practices.
- Train users in details of system operation.
- Develop process flows, work instructions, or standard operating procedures for radio frequency identification device (RFID) systems.
- Document equipment or process details of radio frequency identification device (RFID) technology.
- Define and compare possible radio frequency identification device (RFID) solutions to inform selection for specific projects.
- Create simulations or models of radio frequency identification device (RFID) systems to provide information for selection and configuration.
- Analyze radio frequency identification device (RFID)-related supply chain data.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of industry research about new technologies.
- Participate in internal or external training programs to maintain knowledge of validation principles, industry trends, or novel technologies.
- Study product characteristics or customer requirements to determine validation objectives and standards.
- Analyze validation test data to determine whether systems or processes have met validation criteria or to identify root causes of production problems.
- Develop validation master plans, process flow diagrams, test cases, or standard operating procedures.
- Prepare detailed reports or design statements, based on results of validation and qualification tests or reviews of procedures and protocols.
- Maintain validation test equipment.
- Conduct validation or qualification tests of new or existing processes, equipment, or software in accordance with internal protocols or external standards.
- Communicate with regulatory agencies regarding compliance documentation or validation results.
- Prepare, maintain, or review validation and compliance documentation, such as engineering change notices, schematics, or protocols.
- Recommend resolution of identified deviations from established product or process standards.
- Design validation study features, such as sampling, testing, or analytical methodologies.
- Prepare validation or performance qualification protocols for new or modified manufacturing processes, systems, or equipment for production of pharmaceuticals, electronics, or other products.
- Create, populate, or maintain databases for tracking validation activities, test results, or validated systems.
- Resolve testing problems by modifying testing methods or revising test objectives and standards.
- Conduct audits of validation or performance qualification processes to ensure compliance with internal or regulatory requirements.
- Draw samples of raw materials, intermediate products, or finished products for validation testing.
- Direct validation activities, such as protocol creation or testing.
- Coordinate the implementation or scheduling of validation testing with affected departments and personnel.
- Validate or characterize sustainable or environmentally friendly products, using electronic testing platforms.
- Assist in training equipment operators or other staff on validation protocols and standard operating procedures.
- Plan or conduct validation testing of alternative energy products, such as synthetic jet fuels or energy storage systems, such as fuel cells.
- Devise automated lab validation test stations or other test fixtures or equipment.
- Participate in internal or external training programs to maintain knowledge of validation principles, industry trends, or novel technologies.
- Read current literature, talk with colleagues, participate in educational programs, attend meetings or workshops, or participate in professional organizations or conferences to keep abreast of developments in the manufacturing field.
- Troubleshoot new or existing product problems involving designs, materials, or processes.
- Investigate or resolve operational problems, such as material use variances or bottlenecks.
- Identify opportunities or implement changes to improve manufacturing processes or products or to reduce costs, using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.
- Apply continuous improvement methods, such as lean manufacturing, to enhance manufacturing quality, reliability, or cost-effectiveness.
- Provide technical expertise or support related to manufacturing.
- Incorporate new manufacturing methods or processes to improve existing operations.
- Review product designs for manufacturability or completeness.
- Determine root causes of failures or recommend changes in designs, tolerances, or processing methods, using statistical procedures.
- Prepare reports summarizing information or trends related to manufacturing performance.
- Prepare documentation for new manufacturing processes or engineering procedures.
- Design layout of equipment or workspaces to achieve maximum efficiency.
- Communicate manufacturing capabilities, production schedules, or other information to facilitate production processes.
- Supervise technicians, technologists, analysts, administrative staff, or other engineers.
- Design, install, or troubleshoot manufacturing equipment.
- Evaluate manufactured products according to specifications and quality standards.
- Estimate costs, production times, or staffing requirements for new designs.
- Train production personnel in new or existing methods.
- Design tests of finished products or process capabilities to establish standards or validate process requirements.
- Analyze the financial impacts of sustainable manufacturing processes or sustainable product manufacturing.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Purchase equipment, materials, or parts.
- Evaluate current or proposed manufacturing processes or practices for environmental sustainability, considering factors such as greenhouse gas emissions, air pollution, water pollution, energy use, or waste creation.
- Redesign packaging for manufactured products to minimize raw material use or waste.
- Read current literature, talk with colleagues, participate in educational programs, attend meetings or workshops, or participate in professional organizations or conferences to keep abreast of developments in the manufacturing field.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products.
- Conduct or direct system-level automotive testing.
- Provide technical direction to other engineers or engineering support personnel.
- Perform failure, variation, or root cause analyses.
- Calibrate vehicle systems, including control algorithms or other software systems.
- Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics.
- Prepare or present technical or project status reports.
- Conduct research studies to develop new concepts in the field of automotive engineering.
- Establish production or quality control standards.
- Alter or modify designs to obtain specified functional or operational performance.
- Research or implement green automotive technologies involving alternative fuels, electric or hybrid cars, or lighter or more fuel-efficient vehicles.
- Develop calibration methodologies, test methodologies, or tools.
- Create design alternatives for vehicle components, such as camless or dual-clutch engines or alternative air-conditioning systems, to increase fuel efficiency.
- Develop or implement operating methods or procedures.
- Develop engineering specifications or cost estimates for automotive design concepts.
- Conduct automotive design reviews.
- Design vehicles that use lighter materials, such as aluminum, magnesium alloy, or plastic, to improve fuel efficiency.
- Write, review, or maintain engineering documentation.
- Develop specifications for vehicles powered by alternative fuels or alternative power methods.
- Build models for algorithm or control feature verification testing.
- Coordinate production activities with other functional units, such as procurement, maintenance, or quality control.
- Design control systems or algorithms for purposes such as automotive energy management, emissions management, or increased operational safety or performance.
- Develop or integrate control feature requirements.
- Research computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Design vehicles for increased recyclability or use of natural, renewable, or recycled materials in vehicle construction.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products.
- Plan or conduct experiments to validate new materials, optimize startup protocols, reduce conditioning time, or examine contaminant tolerance.
- Provide technical consultation or direction related to the development or production of fuel cell systems.
- Characterize component or fuel cell performances by generating operating maps, defining operating conditions, identifying design refinements, or executing durability assessments.
- Plan or implement fuel cell cost reduction or product improvement projects in collaboration with other engineers, suppliers, support personnel, or customers.
- Conduct fuel cell testing projects, using fuel cell test stations, analytical instruments, or electrochemical diagnostics, such as cyclic voltammetry or impedance spectroscopy.
- Analyze fuel cell or related test data, using statistical software.
- Conduct post-service or failure analyses, using electromechanical diagnostic principles or procedures.
- Define specifications for fuel cell materials.
- Recommend or implement changes to fuel cell system designs.
- Validate design of fuel cells, fuel cell components, or fuel cell systems.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Develop fuel cell materials or fuel cell test equipment.
- Fabricate prototypes of fuel cell components, assemblies, stacks, or systems.
- Manage fuel cell battery hybrid system architecture, including sizing of components, such as fuel cells, energy storage units, or electric drives.
- Design or implement fuel cell testing or development programs.
- Write technical reports or proposals related to engineering projects.
- Simulate or model fuel cell, motor, or other system information, using simulation software programs.
- Design fuel cell systems, subsystems, stacks, assemblies, or components, such as electric traction motors or power electronics.
- Identify or define vehicle and system integration challenges for fuel cell vehicles.
- Calculate the efficiency or power output of a fuel cell system or process.
- Coordinate fuel cell engineering or test schedules with departments outside engineering, such as manufacturing.
- Authorize release of fuel cell parts, components, or subsystems for production.
- Evaluate the power output, system cost, or environmental impact of new hydrogen or non-hydrogen fuel cell system designs.
- Integrate electric drive subsystems with other vehicle systems to optimize performance or mitigate faults.
- Develop or evaluate systems or methods of hydrogen storage for fuel cell applications.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Analyze system performance or operational requirements.
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Develop or test photonic prototypes or models.
- Design, integrate, or test photonics systems or components.
- Assist in the transition of photonic prototypes to production.
- Write reports or proposals related to photonics research or development projects.
- Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components.
- Determine applications of photonics appropriate to meet product objectives or features.
- Conduct research on new photonics technologies.
- Design electro-optical sensing or imaging systems.
- Document photonics system or component design processes, including objectives, issues, or outcomes.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Train operators, engineers, or other personnel.
- Analyze, fabricate, or test fiber-optic links.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Create or maintain photonic design histories.
- Oversee or provide expertise on manufacturing, assembly, or fabrication processes.
- Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices.
- Design solar energy photonics or other materials or devices to generate energy.
- Design or redesign optical fibers to minimize energy loss.
- Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Maintain and apply knowledge of current policies, regulations, and industrial processes.
- Investigate industrial accidents, injuries, or occupational diseases to determine causes and preventive measures.
- Conduct research to evaluate safety levels for products.
- Evaluate product designs for safety.
- Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
- Recommend procedures for detection, prevention, and elimination of physical, chemical, or other product hazards.
- Report or review findings from accident investigations, facilities inspections, or environmental testing.
- Evaluate potential health hazards or damage that could occur from product misuse.
- Evaluate adequacy of actions taken to correct health inspection violations.
- Interpret safety regulations for others interested in industrial safety, such as safety engineers, labor representatives, and safety inspectors.
- Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
- Participate in preparation of product usage and precautionary label instructions.
- Interview employers and employees to obtain information about work environments and workplace incidents.
- Provide expert testimony in litigation cases.
- Review employee safety programs to determine their adequacy.
- Conduct or direct testing of air quality, noise, temperature, or radiation levels to verify compliance with health and safety regulations.
- Provide technical advice and guidance to organizations on how to handle health-related problems and make needed changes.
- Develop industry standards of product safety.
- Maintain liaisons with outside organizations, such as fire departments, mutual aid societies, and rescue teams, so that emergency responses can be facilitated.
- Plan and conduct industrial hygiene research.
- Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
- Write and revise safety regulations and codes.
- Confer with medical professionals to assess health risks and to develop ways to manage health issues and concerns.
- Design and build safety equipment.
- Check floors of plants to ensure that they are strong enough to support heavy machinery.
- Inspect facilities, machinery, or safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
- Install safety devices on machinery or direct device installation.
- Maintain and apply knowledge of current policies, regulations, and industrial processes.
- Read current scientific or trade literature to stay abreast of scientific, industrial, or technological advances.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Adapt or design computer hardware or software for medical science uses.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Research new materials to be used for products, such as implanted artificial organs.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Advise manufacturing staff regarding problems with fermentation, filtration, or other bioproduction processes.
- Collaborate with manufacturing or quality assurance staff to prepare product specification or safety sheets, standard operating procedures, user manuals, or qualification and validation reports.
- Communicate with bioregulatory authorities regarding licensing or compliance responsibilities.
- Communicate with suppliers regarding the design or specifications of bioproduction equipment, instrumentation, or materials.
- Confer with research and biomanufacturing personnel to ensure the compatibility of design and production.
- Consult with chemists or biologists to develop or evaluate novel technologies.
- Design and deliver technology, such as prosthetic devices, to assist people with disabilities.
- Design or conduct follow-up experimentation, based on generated data, to meet established process objectives.
- Design or develop medical diagnostic or clinical instrumentation, equipment, or procedures, using the principles of engineering and biobehavioral sciences.
- Design or direct bench or pilot production experiments to determine the scale of production methods that optimize product yield and minimize production costs.
- Develop bioremediation processes to reduce pollution, protect the environment, or treat waste products.
- Develop methodologies for transferring procedures or biological processes from laboratories to commercial-scale manufacturing production.
- Develop statistical models or simulations, using statistical or modeling software.
- Lead studies to examine or recommend changes in process sequences or operation protocols.
- Maintain databases of experiment characteristics or results.
- Manage teams of engineers by creating schedules, tracking inventory, creating or using budgets, or overseeing contract obligations or deadlines.
- Prepare project plans for equipment or facility improvements, including time lines, budgetary estimates, or capital spending requests.
- Prepare technical reports, data summary documents, or research articles for scientific publication, regulatory submissions, or patent applications.
- Recommend process formulas, instrumentation, or equipment specifications, based on results of bench or pilot experimentation.
- Review existing manufacturing processes to identify opportunities for yield improvement or reduced process variation.
- Read current scientific or trade literature to stay abreast of scientific, industrial, or technological advances.
