- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 2 | 3 | 3 | 49-2092.00 | Electric Motor, Power Tool, and Related Repairers |
| 2 | 2 | 3 | 49-2097.00 | Audiovisual Equipment Installers and Repairers |
| 1 | 4 | 3 | 49-2021.00 | Radio, Cellular, and Tower Equipment Installers and Repairers |
| 1 | 3 | 3 | 49-2093.00 | Electrical and Electronics Installers and Repairers, Transportation Equipment 
|
| 1 | 3 | 3 | 49-2095.00 | Electrical and Electronics Repairers, Powerhouse, Substation, and Relay |
| 1 | 2 | 3 | 49-2096.00 | Electronic Equipment Installers and Repairers, Motor Vehicles |
| 1 | 2 | 3 | 49-2022.00 | Telecommunications Equipment Installers and Repairers, Except Line Installers
|
| 1 | 1 | 3 | 49-9064.00 | Watch and Clock Repairers |
| 1 | 1 | 2 | 49-3043.00 | Rail Car Repairers |
| 1 | 1 | 3 | 17-3024.01 | Robotics Technicians |
| 1 | 1 | 4 | 13-1199.07 | Security Management Specialists
|
| 1 | 1 | 3 | 53-6041.00 | Traffic Technicians |
- Repair and operate battery-charging equipment.
- Test battery charges, and replace or recharge batteries as necessary.
- Rewire electrical systems, and repair or replace electrical accessories.
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Record repairs required, parts used, and labor time.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Lubricate moving parts.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Weld, braze, or solder electrical connections.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Set machinery for proper performance, using computers.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Test conditions, fluid levels, and specific gravities of electrolyte cells, using voltmeters, hydrometers, and thermometers.
- Add water or acid to battery cell solutions to obtain specified concentrations.
- Pour compounds into transformer-case terminal openings to seal out moisture.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Drain and filter transformer oil and refill transformers with oil until coils are submerged.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Inspect batteries for structural defects such as dented cans, damaged carbon rods and terminals, and defective seals.
- Bolt porcelain insulators to wood parts to assemble hot stools.
- Position and level battery cells, anodes, or cathodes, using hoists or leveling jacks, or signal other workers to perform positioning and leveling.
- Clean, rinse, and dry transformer cases, using boiling water, scrapers, solvents, hoses, and cloths.
- Repair and operate battery-charging equipment.
- Test battery charges, and replace or recharge batteries as necessary.
- Rewire electrical systems, and repair or replace electrical accessories.
- Install, service, and repair electronic equipment or instruments such as televisions, radios, and videocassette recorders.
- Disassemble entertainment equipment and repair or replace loose, worn, or defective components and wiring, using hand tools and soldering irons.
- Calibrate and test equipment, and locate circuit and component faults, using hand and power tools and measuring and testing instruments such as resistance meters and oscilloscopes.
- Confer with customers to determine the nature of problems or to explain repairs.
- Position or mount speakers, and wire speakers to consoles.
- Instruct customers on the safe and proper use of equipment.
- Make service calls to repair units in customers' homes, or return units to shops for major repairs.
- Read and interpret electronic circuit diagrams, function block diagrams, specifications, engineering drawings, and service manuals.
- Tune or adjust equipment and instruments to obtain optimum visual or auditory reception, according to specifications, manuals, and drawings.
- Keep records of work orders and test and maintenance reports.
- Compute cost estimates for labor and materials.
- Install, service, and repair electronic equipment or instruments such as televisions, radios, and videocassette recorders.
- Disassemble entertainment equipment and repair or replace loose, worn, or defective components and wiring, using hand tools and soldering irons.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
- Run appropriate power, ground, or coaxial cables.
- Test operation of tower transmission components, using sweep testing tools or software.
- Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).
- Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.
- Replace existing antennas with new antennas as directed.
- Bolt equipment into place, using hand or power tools.
- Install, connect, or test underground or aboveground grounding systems.
- Complete reports related to project status, progress, or other work details, using computer software.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Transport equipment to work sites, using utility trucks and equipment trailers.
- Take site survey photos or photos of work performed, using digital cameras.
- Climb towers to access components, using safety equipment, such as full-body harnesses.
- Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.
- Perform maintenance or repair work on existing tower equipment, using hand or power tools.
- Locate tower sites where work is to be performed, using mapping software.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Mount equipment on transmission towers and in vehicles such as ships or ambulances.
- Test emergency transmitters to ensure their readiness for immediate use.
- Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Repair or rebuild equipment such as starters, generators, distributors, or door controls, using electrician's tools.
- Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
- Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.
- Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software.
- Reassemble and test equipment after repairs.
- Splice wires with knives or cutting pliers, and solder connections to fixtures, outlets, and equipment.
- Maintain equipment service records.
- Refer to schematics and manufacturers' specifications that show connections and provide instructions on how to locate problems.
- Install fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools.
- Install new fuses, electrical cables, or power sources as required.
- Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers.
- Confer with customers to determine the nature of malfunctions.
- Install electrical equipment such as air-conditioning, heating, or ignition systems and components such as generator brushes and commutators, using hand tools.
- Estimate costs of repairs based on parts and labor requirements.
- Measure, cut, and install frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.
- Repair or rebuild equipment such as starters, generators, distributors, or door controls, using electrician's tools.
- Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
- Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.
- Construct, test, maintain, and repair substation relay and control systems.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Inspect and test equipment and circuits to identify malfunctions or defects, using wiring diagrams and testing devices such as ohmmeters, voltmeters, or ammeters.
- Prepare and maintain records detailing tests, repairs, and maintenance.
- Consult manuals, schematics, wiring diagrams, and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning.
- Analyze test data to diagnose malfunctions, to determine performance characteristics of systems, or to evaluate effects of system modifications.
- Notify facility personnel of equipment shutdowns.
- Run signal quality and connectivity tests for individual cables, and record results.
- Maintain inventories of spare parts for all equipment, requisitioning parts as necessary.
- Test insulators and bushings of equipment by inducing voltage across insulation, testing current, and calculating insulation loss.
- Schedule and supervise the construction and testing of special devices and the implementation of unique monitoring or control systems.
- Schedule and supervise splicing or termination of cables in color-code order.
- Test oil in circuit breakers and transformers for dielectric strength, refilling oil periodically.
- Disconnect voltage regulators, bolts, and screws, and connect replacement regulators to high-voltage lines.
- Set forms and pour concrete footings for installation of heavy equipment.
- Construct, test, maintain, and repair substation relay and control systems.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
- Replace and clean electrical or electronic components.
- Install equipment and accessories, such as stereos, navigation equipment, communication equipment, and security systems.
- Inspect and test electrical or electronic systems to locate and diagnose malfunctions, using visual inspections and testing instruments, such as oscilloscopes and voltmeters.
- Cut openings and drill holes for fixtures and equipment, using electric drills and routers.
- Splice wires with knives or cutting pliers, and solder connections to fixtures and equipment.
- Run new speaker and electrical cables.
- Confer with customers to determine the nature of malfunctions.
- Remove seats, carpeting, and interiors of doors and add sound-absorbing material in empty spaces, reinstalling interior parts.
- Record results of diagnostic tests.
- Estimate costs of repairs, based on parts and labor charges.
- Build fiberglass or wooden enclosures for sound components, and fit them to automobile dimensions.
- Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
- Replace and clean electrical or electronic components.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Remove and replace plug-in circuit equipment.
- Demonstrate equipment to customers and explain its use, responding to any inquiries or complaints.
- Test circuits and components of malfunctioning telecommunications equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
- Test repaired, newly installed, or updated equipment to ensure that it functions properly and conforms to specifications, using test equipment and observation.
- Climb poles and ladders, use truck-mounted booms, and enter areas such as manholes and cable vaults to install, maintain, or inspect equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Run wires between components and to outside cable systems, connecting them to wires from telephone poles or underground cable accesses.
- Test connections to ensure that power supplies are adequate and that communications links function.
- Note differences in wire and cable colors so that work can be performed correctly.
- Inspect equipment on a regular basis to ensure proper functioning.
- Collaborate with other workers to locate and correct malfunctions.
- Remove loose wires and other debris after work is completed.
- Maintain computer and manual records pertaining to facilities and equipment.
- Communicate with bases, using telephones or two-way radios to receive instructions or technical advice, or to report equipment status.
- Remove and remake connections to change circuit layouts, following work orders or diagrams.
- Clean and maintain tools, test equipment, and motor vehicles.
- Perform database verifications, using computers.
- Request support from technical service centers when on-site procedures fail to solve installation or maintenance problems.
- Analyze test readings, computer printouts, and trouble reports to determine equipment repair needs and required repair methods.
- Adjust or modify equipment to enhance equipment performance or to respond to customer requests.
- Refer to manufacturers' manuals to obtain maintenance instructions pertaining to specific malfunctions.
- Dig holes or trenches as necessary for equipment installation and access.
- Review manufacturer's instructions, manuals, technical specifications, building permits, and ordinances to determine communication equipment requirements and procedures.
- Drive crew trucks to and from work areas.
- Route and connect cables and lines to switches, switchboard equipment, and distributing frames, using wire-wrap guns or soldering irons to connect wires to terminals.
- Designate cables available for use.
- Diagnose and correct problems from remote locations, using special switchboards to find the sources of problems.
- Program computerized switches and switchboards to provide requested features.
- Enter codes needed to correct electronic switching system programming.
- Examine telephone transmission facilities to determine requirements for new or additional telephone services.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Install updated software and programs that maintain existing software or provide requested features, such as time-correlated call routing.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Determine viability of sites through observation, and discuss site locations and construction requirements with customers.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Provide input into the design and manufacturing of new equipment.
- Address special issues or situations, such as illegal or unauthorized use of equipment, or cases of electrical or acoustic shock.
- Place intercept circuits on terminals to handle vacant lines in central office installations.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Remove and replace plug-in circuit equipment.
- Test and replace batteries and other electronic components.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
- Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
- Oil moving parts of timepieces.
- Estimate repair costs and timepiece values.
- Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
- Test timepiece accuracy and performance, using meters and other electronic instruments.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Order supplies, including replacement parts, for timing instruments.
- Gather information from customers about a timepiece's problems and its service history.
- Record quantities and types of timepieces repaired, serial and model numbers of items, work performed, and charges for repairs.
- Demagnetize mechanisms, using demagnetizing machines.
- Fabricate parts for watches and clocks, using small lathes and other machines.
- Test and replace batteries and other electronic components.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Record conditions of cars, and repair and maintenance work performed or to be performed.
- Inspect components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Repair or replace defective or worn parts such as bearings, pistons, and gears, using hand tools, torque wrenches, power tools, and welding equipment.
- Inspect the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Remove locomotives, car mechanical units, or other components, using pneumatic hoists and jacks, pinch bars, hand tools, and cutting torches.
- Test units for operability before and after repairs.
- Adjust repaired or replaced units as needed to ensure proper operation.
- Repair, fabricate, and install steel or wood fittings, using blueprints, shop sketches, and instruction manuals.
- Perform scheduled maintenance, and clean units and components.
- Examine car roofs for wear and damage, and repair defective sections, using roofing material, cement, nails, and waterproof paint.
- Paint car exteriors, interiors, and fixtures.
- Disassemble units such as water pumps, control valves, and compressors so that repairs can be made.
- Measure diameters of axle wheel seats, using micrometers, and mark dimensions on axles so that wheels can be bored to specified dimensions.
- Test electrical systems of cars by operating systems and using testing equipment such as ammeters.
- Replace defective wiring and insulation, and tighten electrical connections, using hand tools.
- Install and repair interior flooring, fixtures, walls, plumbing, steps, and platforms.
- Repair window sash frames, attach weather stripping and channels to frames, and replace window glass, using hand tools.
- Align car sides for installation of car ends and crossties, using width gauges, turnbuckles, and wrenches.
- Repair car upholstery.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics.
- Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors.
- Maintain service records of robotic equipment or automated production systems.
- Modify computer-controlled robot movements.
- Perform preventive or corrective maintenance on robotic systems or components.
- Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
- Attach wires between controllers.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Train customers or other personnel to install, use, or maintain robots.
- Build or assemble robotic devices or systems.
- Document robotics test procedures and results.
- Assist engineers in the design, configuration, or application of robotic systems.
- Install new robotic systems in stationary positions or on tracks.
- Program complex robotic systems, such as vision systems.
- Develop robotic path motions to maximize efficiency, safety, and quality.
- Fabricate housings, jigs, fittings, or fixtures, using metalworking machines.
- Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples.
- Inspect installation sites.
- Maintain inventories of robotic production supplies, such as sensors or cables.
- Develop three-dimensional simulations of automation systems.
- Operate robots to perform customized tasks, such as environmental cleanup or explosive detection operations.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Engineer, install, maintain, or repair security systems, programmable logic controls, or other security-related electronic systems.
- Assess the nature and level of physical security threats so that the scope of the problem can be determined.
- Budget and schedule security design work.
- Conduct security audits to identify potential vulnerabilities related to physical security or staff safety.
- Design security policies, programs, or practices to ensure adequate security relating to alarm response, access card use, and other security needs.
- Design, implement, or establish requirements for security systems, video surveillance, motion detection, or closed-circuit television systems to ensure proper installation and operation.
- Develop conceptual designs of security systems.
- Develop or review specifications for design or construction of security systems.
- Inspect fire, intruder detection, or other security systems.
- Inspect physical security design features, installations, or programs to ensure compliance with applicable standards or regulations.
- Interview witnesses or suspects to identify persons responsible for security breaches or to establish losses, pursue prosecutions, or obtain restitution.
- Monitor tapes or digital recordings to identify the source of losses.
- Monitor the work of contractors in the design, construction, and startup phases of security systems.
- Outline system security criteria for pre-bid meetings with clients and companies to ensure comprehensiveness and appropriateness for implementation.
- Perform risk analyses so that appropriate countermeasures can be developed.
- Prepare documentation for case reports or court proceedings.
- Prepare, maintain, or update security procedures, security system drawings, or related documentation.
- Provide system design and integration recommendations.
- Recommend improvements in security systems or procedures.
- Respond to emergency situations on an on-call basis.
- Review design drawings or technical documents for completeness, correctness, or appropriateness.
- Test security measures for final acceptance and implement or provide procedures for ongoing monitoring and evaluation of the measures.
- Train personnel in security procedures or use of security equipment.
- Engineer, install, maintain, or repair security systems, programmable logic controls, or other security-related electronic systems.
- Maintain or make minor adjustments or field repairs to equipment used in surveys, including the replacement of parts on traffic data gathering devices.
- Study traffic delays by noting times of delays, the numbers of vehicles affected, and vehicle speed through the delay area.
- Interact with the public to answer traffic-related questions, respond to complaints or requests, or discuss traffic control ordinances, plans, policies, or procedures.
- Prepare graphs, charts, diagrams, or other aids to illustrate observations or conclusions.
- Analyze data related to traffic flow, accident rates, or proposed development to determine the most efficient methods to expedite traffic flow.
- Prepare work orders for repair, maintenance, or changes in traffic systems.
- Plan, design, and improve components of traffic control systems to accommodate current or projected traffic and to increase usability and efficiency.
- Compute time settings for traffic signals or speed restrictions, using standard formulas.
- Prepare drawings of proposed signal installations or other control devices, using drafting instruments or computer-automated drafting equipment.
- Study factors affecting traffic conditions, such as lighting or sign and marking visibility, to assess their effectiveness.
- Gather and compile data from hand count sheets, machine count tapes, or radar speed checks and code data for computer input.
- Measure and record the speed of vehicular traffic, using electrical timing devices or radar equipment.
- Lay out pavement markings for striping crews.
- Provide technical supervision regarding traffic control devices to other traffic technicians or laborers.
- Operate counters and record data to assess the volume, type, and movement of vehicular or pedestrian traffic at specified times.
- Place and secure automatic counters, using power tools, and retrieve counters after counting periods end.
- Review traffic control or barricade plans to issue permits for parades or other special events or for construction work that affects rights of way, providing assistance with plan preparation or revision, as necessary.
- Time stoplights or other delays, using stopwatches.
- Visit development or work sites to determine projects' effect on traffic and the adequacy of traffic control and safety plans or to suggest traffic control measures.
- Establish procedures for street closures or for repair or construction projects.
- Provide traffic information, such as road conditions, to the public.
- Monitor street or utility projects for compliance to traffic control permit conditions.
- Develop plans or long-range strategies for providing adequate parking space.
- Interview motorists about specific intersections or highways to gather road-condition information for use in planning.
- Maintain or make minor adjustments or field repairs to equipment used in surveys, including the replacement of parts on traffic data gathering devices.
