- Compute dimensions, areas, volumes, and weights.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 3 | 3 | 51-4111.00 | Tool and Die Makers |
| 1 | 3 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 3 | 51-4041.00 | Machinists |
| 1 | 2 | 3 | 51-4062.00 | Patternmakers, Metal and Plastic |
| 1 | 2 | 2 | 51-4034.00 | Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-4192.00 | Layout Workers, Metal and Plastic |
| 1 | 1 | 2 | 51-4035.00 | Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 3 | 51-9162.00 | Computer Numerically Controlled Tool Programmers 
|
| 1 | 1 | 3 | 51-6092.00 | Fabric and Apparel Patternmakers |
| 1 | 1 | 2 | 51-2061.00 | Timing Device Assemblers and Adjusters |
| 1 | 1 | 2 | 51-9194.00 | Etchers and Engravers |
- Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, or dial indicators.
- Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, or rulers.
- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, or grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
- Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools, hand tools, or welders.
- Inspect finished dies for smoothness, contour conformity, and defects.
- Select metals to be used from a range of metals and alloys, based on properties such as hardness or heat tolerance.
- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.
- File, grind, shim, and adjust different parts to properly fit them together.
- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
- Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
- Design jigs, fixtures, and templates for use as work aids in the fabrication of parts or products.
- Cut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand tools.
- Set up and operate drill presses to drill and tap holes in parts for assembly.
- Develop and design new tools and dies, using computer-aided design software.
- Set pyrometer controls of heat-treating furnaces and feed or place parts, tools, or assemblies into furnaces to harden.
- Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, or dial indicators.
- Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, or rulers.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Monitor the feed and speed of machines during the machining process.
- Maintain machine tools in proper operational condition.
- Fit and assemble parts to make or repair machine tools.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Operate equipment to verify operational efficiency.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Prepare working sketches for the illustration of product appearance.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Advise clients about the materials being used for finished products.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Read and interpret blueprints or drawings of parts to be cast or patterns to be made, compute dimensions, and plan operational sequences.
- Verify conformance of patterns or template dimensions to specifications, using measuring instruments such as calipers, scales, and micrometers.
- Set up and operate machine tools, such as milling machines, lathes, drill presses, and grinders, to machine castings or patterns.
- Repair and rework templates and patterns.
- Assemble pattern sections, using hand tools, bolts, screws, rivets, glue, or welding equipment.
- Construct platforms, fixtures, and jigs for holding and placing patterns.
- Clean and finish patterns or templates, using emery cloths, files, scrapers, and power grinders.
- Mark identification numbers or symbols onto patterns or templates.
- Program computerized numerical control machine tools.
- Create computer models of patterns or parts, using modeling software.
- Design and create templates, patterns, or coreboxes according to work orders, sample parts, or mockups.
- Lay out and draw or scribe patterns onto material, using compasses, protractors, rulers, scribes, or other instruments.
- Paint or lacquer patterns.
- Select pattern materials such as wood, resin, and fiberglass.
- Apply plastic-impregnated fabrics or coats of sealing wax or lacquer to patterns used to produce plastic.
- Read and interpret blueprints or drawings of parts to be cast or patterns to be made, compute dimensions, and plan operational sequences.
- Verify conformance of patterns or template dimensions to specifications, using measuring instruments such as calipers, scales, and micrometers.
- Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
- Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
- Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
- Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
- Start lathe or turning machines and observe operations to ensure that specifications are met.
- Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
- Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
- Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
- Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
- Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
- Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
- Compute layout dimensions, and determine and mark reference points on metal stock or workpieces for further processing, such as welding and assembly.
- Mark curves, lines, holes, dimensions, and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
- Plan locations and sequences of cutting, drilling, bending, rolling, punching, and welding operations, using compasses, protractors, dividers, and rules.
- Fit and align fabricated parts to be welded or assembled.
- Locate center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
- Plan and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
- Lay out and fabricate metal structural parts such as plates, bulkheads, and frames.
- Lift and position workpieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
- Design and prepare templates of wood, paper, or metal.
- Install doors, hatches, brackets, and clips.
- Brace parts in position within hulls or ships for riveting or welding.
- Inspect machined parts to verify conformance to specifications.
- Add dimensional details to blueprints or drawings made by other workers.
- Apply pigment to layout surfaces, using paint brushes.
- Compute layout dimensions, and determine and mark reference points on metal stock or workpieces for further processing, such as welding and assembly.
- Compute dimensions, tolerances, and angles of workpieces or machines according to specifications and knowledge of metal properties and shop mathematics.
- Remove workpieces from machines, and check to ensure that they conform to specifications, using measuring instruments such as microscopes, gauges, calipers, and micrometers.
- Verify alignment of workpieces on machines, using measuring instruments such as rules, gauges, or calipers.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Observe milling or planing machine operation, and adjust controls to ensure conformance with specified tolerances.
- Select and install cutting tools and other accessories according to specifications, using hand tools or power tools.
- Position and secure workpieces on machines, using holding devices, measuring instruments, hand tools, and hoists.
- Replace worn tools, using hand tools, and sharpen dull tools, using bench grinders.
- Study blueprints, layouts, sketches, or work orders to assess workpiece specifications and to determine tooling instructions, tools and materials needed, and sequences of operations.
- Move cutters or material manually or by turning handwheels, or engage automatic feeding mechanisms to mill workpieces to specifications.
- Mount attachments and tools, such as pantographs, engravers, or routers, to perform other operations, such as drilling or boring.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Record production output.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Make templates or cutting tools.
- Compute dimensions, tolerances, and angles of workpieces or machines according to specifications and knowledge of metal properties and shop mathematics.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Write instruction sheets and cutter lists for a machine's controller to guide setup and encode numerical control tapes.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Modify existing programs to enhance efficiency.
- Sort shop orders into groups to maximize materials utilization and minimize machine setup time.
- Compare encoded tapes or computer printouts with original part specifications and blueprints to verify accuracy of instructions.
- Perform preventative maintenance or minor repairs on machines.
- Prepare geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper.
- Draw machine tool paths on pattern film according to guidelines for tool speed and efficiency, using colored markers.
- Enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers.
- Align and secure pattern film on reference tables of optical programmers, and observe enlarger scope views of printed circuit boards.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Compute dimensions of patterns according to sizes, considering stretching of material.
- Create a master pattern for each size within a range of garment sizes, using charts, drafting instruments, computers, or grading devices.
- Input specifications into computers to assist with pattern design and pattern cutting.
- Draw details on outlined parts to indicate where parts are to be joined, as well as the positions of pleats, pockets, buttonholes, and other features, using computers or drafting instruments.
- Make adjustments to patterns after fittings.
- Mark samples and finished patterns with information, such as garment size, section, style, identification, and sewing instructions.
- Draw outlines of pattern parts by adapting or copying existing patterns, or by drafting new patterns.
- Test patterns by making and fitting sample garments.
- Position and cut out master or sample patterns, using scissors and knives, or print out copies of patterns, using computers.
- Create a paper pattern from which to mass-produce a design concept.
- Discuss design specifications with designers, and convert their original models of garments into patterns of separate parts that can be laid out on a length of fabric.
- Examine sketches, sample articles, and design specifications to determine quantities, shapes, and sizes of pattern parts, and to determine the amount of material or fabric required to make a product.
- Determine the best layout of pattern pieces to minimize waste of material, and mark fabric accordingly.
- Create design specifications to provide instructions on garment sewing and assembly.
- Trace outlines of paper onto cardboard patterns, and cut patterns into parts to make templates.
- Trace outlines of specified patterns onto material, and cut fabric, using scissors.
- Compute dimensions of patterns according to sizes, considering stretching of material.
- Estimate spaces between collets and first inner coils to determine if spaces are within acceptable limits.
- Assemble and install components of timepieces to complete mechanisms, using watchmakers' tools and loupes.
- Observe operation of timepiece parts and subassemblies to determine accuracy of movement, and to diagnose causes of defects.
- Test operation and fit of timepiece parts and subassemblies, using electronic testing equipment, tweezers, watchmakers' tools, and loupes.
- Replace specified parts to repair malfunctioning timepieces, using watchmakers' tools, loupes, and holding fixtures.
- Disassemble timepieces such as watches, clocks, and chronometers so that repairs can be made.
- Clean and lubricate timepiece parts and assemblies, using solvents, buff sticks, and oil.
- Examine components of timepieces such as watches, clocks, or chronometers for defects, using loupes or microscopes.
- Bend parts, such as hairsprings, pallets, barrel covers, and bridges, to correct deficiencies in truing or endshake, using tweezers.
- Change timing weights on balance wheels to correct deficient timing.
- Adjust sizes or positioning of timepiece parts to achieve specified fit or function, using calipers, fixtures, and loupes.
- Mount hairsprings and balance wheel assemblies between jaws of truing calipers.
- Bend inner coils of springs away from or toward collets, using tweezers, to locate centers of collets in centers of springs, and to correct errors resulting from faulty colleting of coils.
- Turn wheels of calipers and examine springs, using loupes, to determine if center coils appear as perfect circles.
- Examine and adjust hairspring assemblies to ensure horizontal and circular alignment of hairsprings, using calipers, loupes, and watchmakers' tools.
- Review blueprints, sketches, or work orders to gather information about tasks to be completed.
- Tighten or replace loose jewels, using watchmakers' tools.
- Estimate spaces between collets and first inner coils to determine if spaces are within acceptable limits.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
