- Splice or terminate cables or electrical wiring in hydroelectric plants.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 1 | 2 | 51-2023.00 | Electromechanical Equipment Assemblers 
|
| 1 | 1 | 2 | 51-9012.00 | Separating, Filtering, Clarifying, Precipitating, and Still Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
| 1 | 1 | 2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
- Connect cables, tubes, and wiring, according to specifications.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- Connect cables, tubes, and wiring, according to specifications.
- Connect pipes between vats and processing equipment.
- Dump, pour, or load specified amounts of refined or unrefined materials into equipment or containers for further processing or storage.
- Operate machines to process materials in compliance with applicable safety, energy, or environmental regulations.
- Monitor material flow or instruments, such as temperature or pressure gauges, indicators, or meters, to ensure optimal processing conditions.
- Turn valves or move controls to admit, drain, separate, filter, clarify, mix, or transfer materials.
- Set up or adjust machine controls to regulate conditions such as material flow, temperature, or pressure.
- Examine samples to verify qualities such as clarity, cleanliness, consistency, dryness, or texture.
- Start agitators, shakers, conveyors, pumps, or centrifuge machines.
- Inspect machines or equipment for hazards, operating efficiency, malfunctions, wear, or leaks.
- Collect samples of materials or products for laboratory analysis.
- Communicate processing instructions to other workers.
- Turn valves to pump sterilizing solutions or rinse water through pipes or equipment or to spray vats with atomizers.
- Maintain logs of instrument readings, test results, or shift production for entry in computer databases.
- Remove clogs, defects, or impurities from machines, tanks, conveyors, screens, or other processing equipment.
- Clean or sterilize tanks, screens, inflow pipes, production areas, or equipment, using hoses, brushes, scrapers, or chemical solutions.
- Measure or weigh materials to be refined, mixed, transferred, stored, or otherwise processed.
- Test samples to determine viscosity, acidity, specific gravity, or degree of concentration, using test equipment such as viscometers, pH meters, or hydrometers.
- Install, maintain, or repair hoses, pumps, filters, or screens to maintain processing equipment, using hand tools.
- Assemble fittings, valves, bowls, plates, disks, impeller shafts, or other parts to prepare equipment for operation.
- Remove full containers from discharge outlets and replace them with empty containers.
- Pack bottles into cartons or crates, using machines.
- Connect pipes between vats and processing equipment.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Thread extruded strips through water tanks and hold-down bars, or attach strands to wires and draw them through tubes.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Ignite burners to preheat products, or use torches to apply heat.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Swage fittings onto cables, using swaging machines.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Install accessories in swaging machines, using hand tools.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Splice cables, using clamps and fittings, or reweave cable strands.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Monitor robotic assembly equipment, such as snake-arm robots, used to assemble, seal, or swage aircraft structures.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Prepare and apply stencils, computer-generated decals, or other decorative items to finished products.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Connect water hoses to cooling systems of dies, using hand tools.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Clamp metal and plywood strips around dies or patterns to form molds.
- Pull level and toggle latches to fill molds, to regulate tension on sheeting, and to release mold covers.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Shape molds to specified contours, using sand, and trowels and related tools.
- Assemble shell halves, patterns, and foundry flasks, and reinforce core boxes, using glue, clamps, wire, bolts, rams, or machines.
- Connect water hoses to cooling systems of dies, using hand tools.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Spray coating in specified patterns according to instructions.
- Clean and maintain equipment, using water hoses and scrapers.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Clean workpieces, using wire brushes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Install gears and holding devices on conveyor equipment.
- Preheat workpieces in ovens.
- Cut metal or other materials, using shears or band saws.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
