- Break mixtures to size, using picks.
Occupations with related tasks Save Table: XLSX CSV
- Prepare raw materials for processing.
- Break up defective products for reprocessing.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Change machine gears, using wrenches.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Wash work areas, machines, equipment, vehicles, or products.
- Fold products and product parts during processing.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Cut or break flashing from materials or products.
- Prepare raw materials for processing.
- Break up defective products for reprocessing.
- Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.
- Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.
- Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.
- Test appliances for conformance to specifications and accuracy of occlusion, using articulators and micrometers.
- Fabricate, alter, or repair dental devices, such as dentures, crowns, bridges, inlays, or appliances for straightening teeth.
- Place tooth models on an apparatus that mimics bite and movement of patient's jaw to evaluate functionality of model.
- Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.
- Train or supervise other dental technicians or dental laboratory bench workers.
- Rebuild or replace linings, wire sections, or missing teeth to repair dentures.
- Apply porcelain paste or wax over prosthesis frameworks or setups, using brushes and spatulas.
- Build and shape wax teeth, using small hand instruments and information from observations or dentists' specifications.
- Load newly constructed teeth into porcelain furnaces to bake the porcelain onto the metal framework.
- Mold wax over denture setups to form the full contours of artificial gums.
- Create a model of patient's mouth by pouring plaster into a dental impression and allowing plaster to set.
- Prepare wax bite blocks and impression trays for use.
- Shape and solder wire and metal frames or bands for dental products, using soldering irons and hand tools.
- Fill chipped or low spots in surfaces of devices, using acrylic resins.
- Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.
- Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.
- Cool or warm glass in the event of temperature extremes.
- Prime all scratches on pinchwelds with primer and allow to dry.
- Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
- Allow all glass parts installed with urethane ample time to cure, taking temperature and humidity into account.
- Apply a bead of urethane around the perimeter of each pinchweld and dress the remaining urethane on the pinchwelds so that it is of uniform level and thickness.
- Select appropriate tools, safety equipment, and parts, according to job requirements.
- Install replacement glass in vehicles.
- Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Replace all moldings, clips, windshield wipers, or other parts that were removed prior to glass replacement or repair.
- Remove broken or damaged glass windshields or window glass from motor vehicles, using hand tools to remove screws from frames holding glass.
- Remove moldings, clips, windshield wipers, screws, bolts, and inside A-pillar moldings and lower headliners in preparation for installation or repair work.
- Install, repair, or replace safety glass and related materials, such as back glass heating elements, on vehicles or equipment.
- Replace or adjust motorized or manual window-raising mechanisms.
- Install new foam dams on pinchwelds, if required.
- Install rubber channeling strips around edges of glass or frames to weatherproof windows or to prevent rattling.
- Hold cut or uneven edges of glass against automated abrasive belts to shape or smooth edges.
- Cut flat safety glass according to specified patterns or perform precision pattern making and glass cutting to custom fit replacement windows.
- Cool or warm glass in the event of temperature extremes.
- Clean packaging containers, line and pad crates, or assemble cartons to prepare for product packing.
- Attach identification labels to finished packaged items, or cut stencils and stencil information on containers, such as lot numbers or shipping destinations.
- Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications.
- Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
- Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
- Remove finished packaged items from machine and separate rejected items.
- Monitor the production line, watching for problems such as pile-ups, jams, or glue that isn't sticking properly.
- Inspect and remove defective products and packaging material.
- Start machine by engaging controls.
- Tend or operate machine that packages product.
- Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.
- Regulate machine flow, speed, or temperature.
- Adjust machine components and machine tension and pressure according to size or processing angle of product.
- Supply materials to spindles, conveyors, hoppers, or other feeding devices and unload packaged product.
- Stack finished packaged items, or wrap protective material around each item, and pack the items in cartons or containers.
- Package the product in the form in which it will be sent out, for example, filling bags with flour from a chute or spout.
- Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels.
- Count and record finished and rejected packaged items.
- Secure finished packaged items by hand tying, sewing, gluing, stapling, or attaching fastener.
- Clean and remove damaged or otherwise inferior materials to prepare raw products for processing.
- Clean packaging containers, line and pad crates, or assemble cartons to prepare for product packing.
- Modify properties of metal alloys, using thermal and mechanical treatments.
- Analyze product failure data and laboratory test results to determine causes of problems and develop solutions.
- Design and direct the testing or control of processing procedures.
- Monitor material performance, and evaluate its deterioration.
- Conduct or supervise tests on raw materials or finished products to ensure their quality.
- Evaluate technical specifications and economic factors relating to process or product design objectives.
- Determine appropriate methods for fabricating and joining materials.
- Guide technical staff in developing materials for specific uses in projected products or devices.
- Review new product plans, and make recommendations for material selection, based on design objectives such as strength, weight, heat resistance, electrical conductivity, and cost.
- Supervise the work of technologists, technicians, and other engineers and scientists.
- Plan and implement laboratory operations to develop material and fabrication procedures that meet cost, product specification, and performance standards.
- Plan and evaluate new projects, consulting with other engineers and corporate executives, as necessary.
- Supervise production and testing processes in industrial settings, such as metal refining facilities, smelting or foundry operations, or nonmetallic materials production operations.
- Solve problems in a number of engineering fields, such as mechanical, chemical, electrical, civil, nuclear, and aerospace.
- Conduct training sessions on new material products, applications, or manufacturing methods for customers and their employees.
- Perform managerial functions, such as preparing proposals and budgets, analyzing labor costs, and writing reports.
- Present technical information at conferences.
- Replicate the characteristics of materials and their components, using computers.
- Design processing plants and equipment.
- Write for technical magazines, journals, and trade association publications.
- Teach in colleges and universities.
- Modify properties of metal alloys, using thermal and mechanical treatments.
- Measure or mix chemicals or compounds in accordance with detailed instructions or formulas.
- Operate nanotechnology compounding, testing, processing, or production equipment in accordance with appropriate standard operating procedures, good manufacturing practices, hazardous material restrictions, or health and safety requirements.
- Maintain work area according to cleanroom or other processing standards.
- Produce images or measurements, using tools or techniques such as atomic force microscopy, scanning electron microscopy, optical microscopy, particle size analysis, or zeta potential analysis.
- Collaborate with scientists or engineers to design or conduct experiments for the development of nanotechnology materials, components, devices, or systems.
- Repair nanotechnology processing or testing equipment or submit work orders for equipment repair.
- Monitor equipment during operation to ensure adherence to specifications for characteristics such as pressure, temperature, or flow.
- Collect or compile nanotechnology research or engineering data.
- Calibrate nanotechnology equipment, such as weighing, testing, or production equipment.
- Monitor hazardous waste cleanup procedures to ensure proper application of nanocomposites or accomplishment of objectives.
- Contribute written material or data for grant or patent applications.
- Inspect or measure thin films of carbon nanotubes, polymers, or inorganic coatings, using a variety of techniques or analytical tools.
- Compare the performance or environmental impact of nanomaterials by nanoparticle size, shape, or organization.
- Develop or modify wet chemical or industrial laboratory experimental techniques for nanoscale use.
- Process nanoparticles or nanostructures, using technologies such as ultraviolet radiation, microwave energy, or catalysis.
- Implement new or enhanced methods or processes for the processing, testing, or manufacture of nanotechnology materials or products.
- Prepare detailed verbal or written presentations for scientists, engineers, project managers, or upper management.
- Perform functional tests of nano-enhanced assemblies, components, or systems, using equipment such as torque gauges or conductivity meters.
- Maintain accurate record or batch-record documentation of nanoproduction.
- Assemble components, using techniques such as interference fitting, solvent bonding, adhesive bonding, heat sealing, or ultrasonic welding.
- Prepare capability data, training materials, or other documentation for transfer of processes to production.
- Analyze the life cycle of nanomaterials or nano-enabled products to determine environmental impact.
- Measure emission of nanodust or nanoparticles during nanocomposite or other nano-scale production processes, using systems such as aerosol detection systems.
- Assist nanoscientists or engineers in processing or characterizing materials according to physical or chemical properties.
- Assist nanoscientists or engineers in writing process specifications or documentation.
- Measure or mix chemicals or compounds in accordance with detailed instructions or formulas.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Maintain clean working environments, according to clean room standards.
- Compute or record photonic test data.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Assist scientists or engineers in the conduct of photonic experiments.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Monitor inventory levels and order supplies as necessary.
- Repair or calibrate products, such as surgical lasers.
- Monitor mechanical factors, such as turbine load or strain information.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Design, build, or modify fixtures used to assemble parts.
- Splice fibers, using fusion splicing or other techniques.
- Optimize photonic process parameters by making prototype or production devices.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Lay out cutting lines for machining, using drafting tools.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Build photonics tools to be applied to electrical grids to detect hot spots, such as failing insulators or conductors.
- Assemble devices or equipment to be used in green technology applications, including solar energy, high efficiency solid state lighting, energy management, smart buildings, or green processes.
- Develop solar power sources for lasers used in fiber optics.
- Fabricate sensors to be used to control wind turbines.
- Perform laser seam welding, heat treatment, or hard facing operations.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
