- Confer with engineers regarding train routes, timetables, and cargoes, and to discuss alternative routes when there are rail defects or obstructions.
Occupations with related tasks Save Table: XLSX CSV
- Coordinate communications between air traffic control and maintenance personnel.
- Relay departure, arrival, delay, aircraft and airfield status, and other pertinent information to upline controlling agencies.
- Provide aircrews with information and services needed for airfield management and flight planning.
- Receive, transmit, and control message traffic.
- Maintain air-to-ground and point-to-point radio contact with aircraft commanders.
- Post visual display boards and status boards.
- Receive and post weather information and flight plan data, such as air routes or arrival and departure times.
- Initiate or conduct airport-wide coordination of snow removal on runways and taxiways.
- Conduct departure and arrival briefings.
- Inspect airfield conditions to ensure compliance with federal regulatory requirements.
- Implement airfield safety procedures to ensure a safe operating environment for personnel and aircraft operation.
- Conduct inspections of the airport property and perimeter to maintain controlled access to airfields.
- Assist in responding to aircraft and medical emergencies.
- Manage wildlife on and around airport grounds.
- Perform and supervise airfield management activities, including mobile airfield management functions.
- Plan and coordinate airfield construction.
- Monitor the arrival, parking, refueling, loading, and departure of all aircraft.
- Train operations staff.
- Coordinate with agencies, such as air traffic control, civil engineers, or command posts, to ensure support of airfield management activities.
- Coordinate with agencies to meet aircrew requirements for billeting, messing, refueling, ground transportation, and transient aircraft maintenance.
- Use airfield landing and navigational aids and digital data terminal communications equipment to perform duties.
- Procure, produce, and provide information on the safe operation of aircraft, such as flight planning publications, operations publications, charts and maps, or weather information.
- Anticipate aircraft equipment needs for air evacuation and cargo flights.
- Collaborate with others to plan flight schedules and air crew assignments.
- Maintain flight and event logs, air crew flying records, and flight operations records of incoming and outgoing flights.
- Coordinate changes to flight itineraries with appropriate Air Traffic Control (ATC) agencies.
- Check military flight plans with civilian agencies.
- Coordinate communications between air traffic control and maintenance personnel.
- Relay departure, arrival, delay, aircraft and airfield status, and other pertinent information to upline controlling agencies.
- Provide aircrews with information and services needed for airfield management and flight planning.
- Receive, transmit, and control message traffic.
- Maintain air-to-ground and point-to-point radio contact with aircraft commanders.
- Post visual display boards and status boards.
- Receive and post weather information and flight plan data, such as air routes or arrival and departure times.
- Initiate or conduct airport-wide coordination of snow removal on runways and taxiways.
- Conduct departure and arrival briefings.
- Issue landing and take-off authorizations or instructions.
- Contact pilots by radio to provide meteorological, navigational, or other information.
- Maintain radio or telephone contact with adjacent control towers, terminal control units, or other area control centers to coordinate aircraft movement.
- Relay air traffic information, such as courses, altitudes, or expected arrival times, to control centers.
- Conduct pre-flight briefings on weather conditions, suggested routes, altitudes, indications of turbulence, or other flight safety information.
- Inform pilots about nearby planes or potentially hazardous conditions, such as weather, speed and direction of wind, or visibility problems.
- Transfer control of departing flights to traffic control centers and accept control of arriving flights.
- Provide flight path changes or directions to emergency landing fields for pilots traveling in bad weather or in emergency situations.
- Alert airport emergency services in cases of emergency or when aircraft are experiencing difficulties.
- Monitor or direct the movement of aircraft within an assigned air space or on the ground at airports to minimize delays and maximize safety.
- Direct pilots to runways when space is available or direct them to maintain a traffic pattern until there is space for them to land.
- Monitor aircraft within a specific airspace, using radar, computer equipment, or visual references.
- Direct ground traffic, including taxiing aircraft, maintenance or baggage vehicles, or airport workers.
- Determine the timing or procedures for flight vector changes.
- Initiate or coordinate searches for missing aircraft.
- Provide on-the-job training to new air traffic controllers.
- Check conditions and traffic at different altitudes in response to pilots' requests for altitude changes.
- Inspect, adjust, or control radio equipment or airport lights.
- Compile information about flights from flight plans, pilot reports, radar, or observations.
- Organize flight plans or traffic management plans to prepare for planes about to enter assigned airspace.
- Review records or reports for clarity and completeness and maintain records or reports, as required under federal law.
- Complete daily activity reports and keep records of messages from aircraft.
- Analyze factors such as weather reports, fuel requirements, or maps to determine air routes.
- Issue landing and take-off authorizations or instructions.
- Contact pilots by radio to provide meteorological, navigational, or other information.
- Maintain radio or telephone contact with adjacent control towers, terminal control units, or other area control centers to coordinate aircraft movement.
- Relay air traffic information, such as courses, altitudes, or expected arrival times, to control centers.
- Conduct pre-flight briefings on weather conditions, suggested routes, altitudes, indications of turbulence, or other flight safety information.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- Confer with flight dispatchers and weather forecasters to keep abreast of flight conditions.
- File instrument flight plans with air traffic control to ensure that flights are coordinated with other air traffic.
- Brief crews about flight details, such as destinations, duties, and responsibilities.
- Use instrumentation to guide flights when visibility is poor.
- Start engines, operate controls, and pilot airplanes to transport passengers, mail, or freight, adhering to flight plans, regulations, and procedures.
- Work as part of a flight team with other crew members, especially during takeoffs and landings.
- Respond to and report in-flight emergencies and malfunctions.
- Inspect aircraft for defects and malfunctions, according to pre-flight checklists.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Monitor gauges, warning devices, and control panels to verify aircraft performance and to regulate engine speed.
- Steer aircraft along planned routes, using autopilot and flight management computers.
- Check passenger and cargo distributions and fuel amounts to ensure that weight and balance specifications are met.
- Order changes in fuel supplies, loads, routes, or schedules to ensure safety of flights.
- Choose routes, altitudes, and speeds that will provide the fastest, safest, and smoothest flights.
- Direct activities of aircraft crews during flights.
- Record in log books information, such as flight times, distances flown, and fuel consumption.
- Instruct other pilots and student pilots in aircraft operations and the principles of flight.
- Make announcements regarding flights, using public address systems.
- Coordinate flight activities with ground crews and air traffic control and inform crew members of flight and test procedures.
- Conduct in-flight tests and evaluations at specified altitudes and in all types of weather to determine the receptivity and other characteristics of equipment and systems.
- Perform minor maintenance work, or arrange for major maintenance.
- Evaluate other pilots or pilot-license applicants for proficiency.
- Load smaller aircraft, handling passenger luggage and supervising refueling.
- Plan and formulate flight activities and test schedules and prepare flight evaluation reports.
- Test and evaluate the performance of new aircraft.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- Confer with flight dispatchers and weather forecasters to keep abreast of flight conditions.
- File instrument flight plans with air traffic control to ensure that flights are coordinated with other air traffic.
- Brief crews about flight details, such as destinations, duties, and responsibilities.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- File instrument flight plans with air traffic control so that flights can be coordinated with other air traffic.
- Request changes in altitudes or routes as circumstances dictate.
- Use instrumentation to pilot aircraft when visibility is poor.
- Start engines, operate controls, and pilot airplanes to transport passengers, mail, or freight according to flight plans, regulations, and procedures.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Check aircraft prior to flights to ensure that the engines, controls, instruments, and other systems are functioning properly.
- Consider airport altitudes, outside temperatures, plane weights, and wind speeds and directions to calculate the speed needed to become airborne.
- Obtain and review data such as load weights, fuel supplies, weather conditions, and flight schedules to determine flight plans and identify needed changes.
- Check baggage or cargo to ensure that it has been loaded correctly.
- Order changes in fuel supplies, loads, routes, or schedules to ensure safety of flights.
- Plan flights according to government and company regulations, using aeronautical charts and navigation instruments.
- Choose routes, altitudes, and speeds that will provide the fastest, safest, and smoothest flights.
- Co-pilot aircraft or perform captain's duties, as required.
- Coordinate flight activities with ground crews and air traffic control, and inform crew members of flight and test procedures.
- Write specified information in flight records, such as flight times, altitudes flown, and fuel consumption.
- Supervise other crew members.
- Fly with other pilots or pilot-license applicants to evaluate their proficiency.
- Rescue and evacuate injured persons.
- Instruct other pilots and student pilots in aircraft operations.
- Teach company regulations and procedures to other pilots.
- Perform minor aircraft maintenance and repair work, or arrange for major maintenance.
- Conduct in-flight tests and evaluations at specified altitudes and in all types of weather to determine the receptivity and other characteristics of equipment and systems.
- Plan and formulate flight activities and test schedules and prepare flight evaluation reports.
- Pilot airplanes or helicopters over farmlands at low altitudes to dust or spray fields with fertilizers, fungicides, or pesticides.
- Check the flight performance of new and experimental planes.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- File instrument flight plans with air traffic control so that flights can be coordinated with other air traffic.
- Request changes in altitudes or routes as circumstances dictate.
- Confer with conductors and other workers via radiotelephones or computers to exchange switching information.
- Report arrival and departure times, train delays, work order completion, and time on duty.
- Read switching instructions and daily car schedules to determine work to be performed, or receive orders from yard conductors.
- Receive, relay, and act upon instructions and inquiries from train operations and customer service center personnel.
- Observe and respond to wayside and cab signals, including color light signals, position signals, torpedoes, flags, and hot box detectors.
- Inspect engines before and after use to ensure proper operation.
- Apply and release hand brakes.
- Signal crew members for movement of engines or trains, using lanterns, hand signals, radios, or telephones.
- Inspect track for defects such as broken rails and switch malfunctions.
- Observe water levels and oil, air, and steam pressure gauges to ensure proper operation of equipment.
- Couple and uncouple air hoses and electrical connections between cars.
- Drive engines within railroad yards or other establishments to couple, uncouple, or switch railroad cars.
- Inspect the condition of stationary trains, rolling stock, and equipment.
- Spot cars for loading and unloading at customer locations.
- Operate track switches, derails, automatic switches, and retarders to change routing of train or cars.
- Perform routine repair and maintenance duties.
- Drive locomotives to and from various stations in roundhouses to have locomotives cleaned, serviced, repaired, or supplied.
- Pull knuckles to open them for coupling.
- Provide assistance in aligning drawbars, using available equipment to lift, pull, or push on the drawbars.
- Ride on moving cars by holding onto grab irons and standing on ladder steps.
- Operate switching diesel engines to switch railroad cars, using remote controls.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Operate and control dinkey engines to transport and shunt cars at industrial or mine sites.
- Operate flatcars equipped with derricks or railcars to transport personnel or equipment.
- Provide assistance in the installation or repair of rails and ties.
- Confer with conductors and other workers via radiotelephones or computers to exchange switching information.
- Report arrival and departure times, train delays, work order completion, and time on duty.
- Read switching instructions and daily car schedules to determine work to be performed, or receive orders from yard conductors.
- Receive, relay, and act upon instructions and inquiries from train operations and customer service center personnel.
- Guide aircraft to designated areas using hand signals, batons, or other methods.
- Radio to flight dispatchers or other personnel to discuss incoming or outgoing aircraft.
- Apply de-icing fluid to aircraft from baskets lifted by truck-mounted cranes.
- Change aircraft oil, coolant, or other fluids.
- Clean aircraft interiors by picking up waste, wiping down windows, or vacuuming.
- Climb ladders to reach aircraft surfaces to be cleaned.
- Complete forms describing tasks completed.
- De-grease aircraft exteriors.
- Empty aircraft lavatory systems or refill them with sanitizer fluid.
- Inspect aircraft components to locate cracks, breaks, leaks, or other problems.
- Load baggage or cargo for crew or passengers.
- Mix cleaning compounds or solutions.
- Polish aircraft exteriors.
- Refill aircraft potable water tanks.
- Refuel aircraft using hoses connected to fuel trucks.
- Remove exhaust stains from aircraft using cleaning fluids.
- Tow aircraft to gates or hangars using tugs, tractors, or other vehicles.
- Wash the aircraft exteriors using lifts, cranes, detergent, or other equipment.
- Guide aircraft to designated areas using hand signals, batons, or other methods.
- Radio to flight dispatchers or other personnel to discuss incoming or outgoing aircraft.
- Guide the driver when the bus is moving in reverse gear.
- Monitor for trains at railroad crossings and signal the bus driver when it is safe to proceed.
- Announce routes or stops.
- Assist disabled children or children with psychological, emotional, or behavioral issues with boarding and exiting the school bus.
- Buckle seatbelts or fasten wheelchair tie-down straps to secure passengers for transportation.
- Clean school bus interiors by picking up waste, wiping down windows, or vacuuming.
- Direct students boarding and exiting the school bus.
- Direct students evacuating the bus during safety drills.
- Escort young children across roads or highways.
- Evacuate students from the school bus in emergency situations.
- Monitor the conduct of students to maintain discipline and safety.
- Open and close school bus doors for students.
- Operate a wheelchair lift to load or unload wheelchairs.
- Prevent or defuse altercations between students.
- Report delays, accidents, or other traffic and transportation situations to dispatchers or other bus drivers, using phones or mobile two-way radios.
- Respond to students' questions, requests, or complaints.
- Talk to children's parents or guardians about problematic behaviors, emotional or developmental problems, or related issues.
- Write and submit reports that include data such as the number of passengers or trips, hours worked, mileage driven, or fuel consumed.
- Guide the driver when the bus is moving in reverse gear.
- Monitor for trains at railroad crossings and signal the bus driver when it is safe to proceed.
- Confer with conductors or traffic control center personnel via radiophones to issue or receive information concerning stops, delays, or oncoming trains.
- Interpret train orders, signals, or railroad rules and regulations that govern the operation of locomotives.
- Receive starting signals from conductors and use controls such as throttles or air brakes to drive electric, diesel-electric, steam, or gas turbine-electric locomotives.
- Monitor gauges or meters that measure speed, amperage, battery charge, or air pressure in brake lines or in main reservoirs.
- Observe tracks to detect obstructions.
- Call out train signals to assistants to verify meanings.
- Operate locomotives to transport freight or passengers between stations or to assemble or disassemble trains within rail yards.
- Check to ensure that brake examination tests are conducted at shunting stations.
- Respond to emergency conditions or breakdowns, following applicable safety procedures and rules.
- Inspect locomotives to verify adequate fuel, sand, water, or other supplies before each run or to check for mechanical problems.
- Inspect locomotives after runs to detect damaged or defective equipment.
- Prepare reports regarding any problems encountered, such as accidents, signaling problems, unscheduled stops, or delays.
- Check to ensure that documentation, such as procedure manuals or logbooks, are in the driver's cab and available for staff use.
- Monitor train loading procedures to ensure that freight or rolling stock are loaded or unloaded without damage.
- Drive diesel-electric rail-detector cars to transport rail-flaw-detecting machines over tracks.
- Confer with conductors or traffic control center personnel via radiophones to issue or receive information concerning stops, delays, or oncoming trains.
- Interpret train orders, signals, or railroad rules and regulations that govern the operation of locomotives.
- Receive starting signals from conductors and use controls such as throttles or air brakes to drive electric, diesel-electric, steam, or gas turbine-electric locomotives.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Report to taxicab services or garages to receive vehicle assignments.
- Collect fares or vouchers from passengers, and make change or issue receipts as necessary.
- Complete accident reports when necessary.
- Determine fares based on trip distances and times, using taximeters and fee schedules, and announce fares to passengers.
- Drive taxicabs or privately owned vehicles to transport passengers.
- Follow relevant safety regulations and state laws governing vehicle operation, and ensure that passengers follow safety regulations.
- Notify dispatchers or company mechanics of vehicle problems.
- Perform minor vehicle repairs, such as cleaning spark plugs, or take vehicles to mechanics for servicing.
- Perform routine vehicle maintenance, such as regulating tire pressure and adding gasoline, oil, and water.
- Pick up passengers at prearranged locations, at taxi stands, or by cruising streets in high-traffic areas.
- Provide passengers with assistance entering and exiting vehicles, and help them with any luggage.
- Provide passengers with information or advice about the local area, points of interest, hotels, or restaurants.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Turn the taximeter on when passengers enter the cab, and turn it off when they reach the final destination.
- Vacuum and clean interiors and wash and polish exteriors of automobiles.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Report to taxicab services or garages to receive vehicle assignments.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Read maps and follow written and verbal geographic directions.
- Arrange to pick up particular customers or groups on a regular schedule.
- Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
- Collect fares or vouchers from passengers, and make change or issue receipts as necessary.
- Complete accident reports when necessary.
- Comply with traffic regulations to operate vehicles in a safe and courteous manner.
- Drive shuttle busses, limousines, company cars, or privately owned vehicles to transport passengers.
- Follow relevant safety regulations and state laws governing vehicle operation, and ensure that passengers follow safety regulations.
- Maintain knowledge of first-aid procedures.
- Notify dispatchers or company mechanics of vehicle problems.
- Operate vehicles with specialized equipment, such as wheelchair lifts, to transport and secure passengers with special needs.
- Perform errands for customers or employers, such as delivering or picking up mail and packages.
- Perform minor vehicle repairs, such as cleaning spark plugs, or take vehicles to mechanics for servicing.
- Perform routine vehicle maintenance, such as regulating tire pressure and adding gasoline, oil, and water.
- Pick up and drop off passengers at regularly scheduled neighborhood locations, following strict time schedules.
- Pick up or meet passengers according to requests, appointments, or schedules.
- Prepare and submit reports that may include the number of passengers or trips, hours worked, mileage driven fuel consumed, or fares received.
- Provide passengers with assistance entering and exiting vehicles, and help them with any luggage.
- Provide passengers with information or advice about the local area, points of interest, hotels, or restaurants.
- Record vehicle routes.
- Regulate heating, lighting, and ventilation systems for passenger comfort.
- Report any vehicle malfunctions or needed repairs.
- Report delays, accidents, or other traffic and transportation situations, using telephones or mobile two-way radios.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Vacuum and clean interiors, and wash and polish exteriors of automobiles.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Read maps and follow written and verbal geographic directions.
- Notify switching departments to deliver specific types of cars.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
- Handle high voltage sources and hang electrical cables.
- Drive loaded shuttle cars to ramps and move controls to discharge loads into mine cars or onto conveyors.
- Pry off loose material from roofs and move it into the paths of machines, using crowbars.
- Move trailing electrical cables clear of obstructions, using rubber safety gloves.
- Control conveyors that run the entire length of shuttle cars to distribute loads as loading progresses.
- Observe hand signals, grade stakes, or other markings when operating machines.
- Examine roadway and clear obstructions from the path of travel.
- Drive machines into piles of material blasted from working faces.
- Operate levers to move conveyor booms or shovels so that mine contents such as coal, rock, and ore can be placed into cars or onto conveyors.
- Clean, fuel, service, and perform safety checks on all equipment, and repair and replace parts as necessary.
- Clean hoppers, and clean spillage from tracks, walks, driveways, and conveyor decking.
- Oil, lubricate, and adjust conveyors, crushers, and other equipment, using hand tools and lubricating equipment.
- Monitor loading processes to ensure that materials are loaded according to specifications.
- Measure, weigh, or verify levels of rock, gravel, or other excavated material to prevent equipment overloads.
- Replace hydraulic hoses, headlight bulbs, and gathering-arm teeth.
- Stop gathering arms when cars are full.
- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
- Advance machines to gather material and convey it into cars.
- Signal workers to move loaded cars.
- Guide and stop cars by switching, applying brakes, or placing scotches, or wooden wedges, between wheels and rails.
- Observe and record car numbers, carriers, customers, tonnages, and grades and conditions of material.
- Inspect boarding and locking of open-top box cars and wedging of side-drop and hopper cars to prevent loss of material in transit.
- Maintain records of materials moved.
- Direct other workers to move stakes, place blocks, position anchors or cables, or move materials.
- Push or ride cars down slopes, or hook cars to cables and control cable drum brakes, to ease cars down inclines.
- Open and close bottom doors of cars to dump contents.
- Notify switching departments to deliver specific types of cars.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
- Act as a liaison between a ship's captain and shore personnel to ensure that schedules and budgets are maintained and that the ship is operated safely and efficiently.
- Start engines to propel ships, and regulate engines and power transmissions to control speeds of ships, according to directions from captains or bridge computers.
- Maintain or repair engines, electric motors, pumps, winches, or other mechanical or electrical equipment, or assist other crew members with maintenance or repair duties.
- Perform or participate in emergency drills, as required.
- Monitor engine, machinery, or equipment indicators when vessels are underway, and report abnormalities to appropriate shipboard staff.
- Maintain complete records of engineering department activities, including machine operations.
- Perform general marine vessel maintenance or repair work, such as repairing leaks, finishing interiors, refueling, or maintaining decks.
- Maintain electrical power, heating, ventilation, refrigeration, water, or sewerage systems.
- Monitor and test operations of engines or other equipment so that malfunctions and their causes can be identified.
- Monitor the availability, use, or condition of lifesaving equipment or pollution preventatives to ensure that international regulations are followed.
- Install engine controls, propeller shafts, or propellers.
- Record orders for changes in ship speed or direction, and note gauge readings or test data, such as revolutions per minute or voltage output, in engineering logs or bellbooks.
- Clean engine parts and keep engine rooms clean.
- Operate or maintain off-loading liquid pumps or valves.
- Supervise marine engine technicians engaged in the maintenance or repair of mechanical or electrical marine vessels, and inspect their work to ensure that it is performed properly.
- Order and receive engine room stores, such as oil or spare parts, maintain inventories, and record usage of supplies.
- Fabricate engine replacement parts, such as valves, stay rods, or bolts, using metalworking machinery.
- Act as a liaison between a ship's captain and shore personnel to ensure that schedules and budgets are maintained and that the ship is operated safely and efficiently.
- Notify workers of any special treatment required for shipments.
- Prepare and submit reports after completion of freight shipments.
- Inspect shipments to ensure that freight is securely braced and blocked.
- Record details about freight conditions, handling of freight, and any problems encountered.
- Advise crews in techniques of stowing dangerous and heavy cargo.
- Observe loading of freight to ensure that crews comply with procedures.
- Recommend remedial procedures to correct any violations found during inspections.
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.
- Direct crews to reload freight or to insert additional bracing or packing as necessary.
- Check temperatures and humidities of shipping and storage areas to ensure that they are at appropriate levels to protect cargo.
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.
- Read draft markings to determine depths of vessels in water.
- Issue certificates of compliance for vessels without violations.
- Write certificates of admeasurement that list details such as designs, lengths, depths, and breadths of vessels, and methods of propulsion.
- Post warning signs on vehicles containing explosives or flammable or radioactive materials.
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.
- Time rolls of ships, using stopwatches.
- Determine types of licenses and safety equipment required, and compute applicable fees such as tolls and wharfage fees.
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.
- Visually inspect cargo for damage upon arrival or discharge.
- Notify workers of any special treatment required for shipments.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
- Design complete hull and superstructure according to specifications and test data, in conformity with standards of safety, efficiency, and economy.
- Supervise other engineers and crew members and train them for routine and emergency duties.
- Study design proposals and specifications to establish basic characteristics of craft, such as size, weight, speed, propulsion, displacement, and draft.
- Perform monitoring activities to ensure that ships comply with international regulations and standards for life-saving equipment and pollution preventatives.
- Oversee construction and testing of prototype in model basin and develop sectional and waterline curves of hull to establish center of gravity, ideal hull form, and buoyancy and stability data.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
- Check, test, and maintain automatic controls and alarm systems.
- Design layout of craft interior, including cargo space, passenger compartments, ladder wells, and elevators.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Conduct environmental, operational, or performance tests on marine machinery and equipment.
- Inspect marine equipment and machinery to draw up work requests and job specifications.
- Prepare, or direct the preparation of, product or system layouts and detailed drawings and schematics.
- Investigate and observe tests on machinery and equipment for compliance with standards.
- Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
- Design and oversee testing, installation, and repair of marine apparatus and equipment.
- Prepare technical reports for use by engineering, management, or sales personnel.
- Procure materials needed to repair marine equipment and machinery.
- Maintain contact with, and formulate reports for, contractors and clients to ensure completion of work at minimum cost.
- Maintain and coordinate repair of marine machinery and equipment for installation on vessels.
- Confer with research personnel to clarify or resolve problems and to develop or modify designs.
- Conduct analytical, environmental, operational, or performance studies to develop designs for products, such as marine engines, equipment, and structures.
- Determine conditions under which tests are to be conducted, as well as sequences and phases of test operations.
- Review work requests and compare them with previous work completed on ships to ensure that costs are economically sound.
- Analyze data to determine feasibility of product proposals.
- Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
