- Monitor meters and pressure gauges to determine consumption rate variations, temperatures, and pressures.
Occupations with related tasks Save Table: XLSX CSV
- Monitor gauges and flowmeters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
- Tend auxiliary equipment such as water treatment and refrigeration units, and heat exchangers.
- Record operating data such as products and quantities pumped, stocks used, gauging results, and operating times.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of interconnections and capacities of pipelines, valve manifolds, pumps, and tankage.
- Turn valves and start pumps to start or regulate flows of substances such as gases, liquids, slurries, or powdered materials.
- Communicate with other workers, using signals, radios, or telephones, to start and stop flows of materials or substances.
- Connect hoses and pipelines to pumps and vessels prior to material transfer, using hand tools.
- Tend vessels that store substances such as gases, liquids, slurries, or powdered materials, checking levels of substances by using calibrated rods or by reading mercury gauges and tank charts.
- Clean, lubricate, and repair pumps and vessels, using hand tools and equipment.
- Read operating schedules or instructions or receive verbal orders to determine amounts to be pumped.
- Test materials and solutions, using testing equipment.
- Add chemicals and solutions to tanks to ensure that specifications are met.
- Collect and deliver sample solutions for laboratory analysis.
- Pump two or more materials into one tank to blend mixtures.
- Monitor gauges and flowmeters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
- Tend auxiliary equipment such as water treatment and refrigeration units, and heat exchangers.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Monitor pumps and flow lines for gas and fluid leaks.
- Gauge oil and gas production.
- Start compressor engines and divert oil from storage tanks into compressor units and auxiliary equipment to recover natural gas from oil.
- Operate engines and pumps to shut off wells according to production schedules, and to switch flow of oil into storage tanks.
- Repair gas and oil meters and gauges.
- Perform routine maintenance on vehicles and equipment.
- Open valves to return compressed gas to bottoms of specified wells to repressurize them and force oil to surface.
- Change water filters.
- Prepare trucks and equipment necessary for the type of pumping service required.
- Attach pumps and hoses to wellheads.
- Mix acids, chemicals, or dry cement as required for a specific job.
- Unload and assemble pipes and pumping equipment, using hand tools.
- Supervise oil pumpers and other workers engaged in producing oil from wells.
- Drive trucks to transport high-pressure pumping equipment, and chemicals, fluids, or gases to be pumped into wells.
- Control pumping and blending equipment to acidize, cement, or fracture gas or oil wells and permeable rock formations.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Monitor pumps and flow lines for gas and fluid leaks.
- Monitor gauges, warning devices, and control panels to verify aircraft performance and to regulate engine speed.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Use instrumentation to guide flights when visibility is poor.
- Start engines, operate controls, and pilot airplanes to transport passengers, mail, or freight, adhering to flight plans, regulations, and procedures.
- Work as part of a flight team with other crew members, especially during takeoffs and landings.
- Respond to and report in-flight emergencies and malfunctions.
- Inspect aircraft for defects and malfunctions, according to pre-flight checklists.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- Steer aircraft along planned routes, using autopilot and flight management computers.
- Check passenger and cargo distributions and fuel amounts to ensure that weight and balance specifications are met.
- Confer with flight dispatchers and weather forecasters to keep abreast of flight conditions.
- Order changes in fuel supplies, loads, routes, or schedules to ensure safety of flights.
- Brief crews about flight details, such as destinations, duties, and responsibilities.
- Choose routes, altitudes, and speeds that will provide the fastest, safest, and smoothest flights.
- Direct activities of aircraft crews during flights.
- Record in log books information, such as flight times, distances flown, and fuel consumption.
- Instruct other pilots and student pilots in aircraft operations and the principles of flight.
- Make announcements regarding flights, using public address systems.
- Coordinate flight activities with ground crews and air traffic control and inform crew members of flight and test procedures.
- Conduct in-flight tests and evaluations at specified altitudes and in all types of weather to determine the receptivity and other characteristics of equipment and systems.
- File instrument flight plans with air traffic control to ensure that flights are coordinated with other air traffic.
- Perform minor maintenance work, or arrange for major maintenance.
- Evaluate other pilots or pilot-license applicants for proficiency.
- Load smaller aircraft, handling passenger luggage and supervising refueling.
- Plan and formulate flight activities and test schedules and prepare flight evaluation reports.
- Test and evaluate the performance of new aircraft.
- Monitor gauges, warning devices, and control panels to verify aircraft performance and to regulate engine speed.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Monitor oil, temperature, and pressure gauges on dashboards to determine if engines are operating safely and efficiently.
- Monitor trains as they go around curves to detect dragging equipment and smoking journal boxes.
- Observe train signals along routes and verify their meanings for engineers.
- Signal locomotive engineers to start or stop trains when coupling or uncoupling cars, using hand signals, lanterns, or radio communication.
- Pull or push track switches to reroute cars.
- Observe signals from other crew members so that work activities can be coordinated.
- Inspect couplings, air hoses, journal boxes, and handbrakes to ensure that they are securely fastened and functioning properly.
- Observe tracks from left sides of locomotives to detect obstructions on tracks.
- Operate locomotives in emergency situations.
- Raise levers to couple and uncouple cars for makeup and breakup of trains.
- Climb ladders to tops of cars to set brakes.
- Receive oral or written instructions from yardmasters or yard conductors indicating track assignments and cars to be switched.
- Inspect locomotives to detect damaged or worn parts.
- Signal other workers to set brakes and to throw track switches when switching cars from trains to way stations.
- Check to see that trains are equipped with supplies such as fuel, water, and sand.
- Set flares, flags, lanterns, or torpedoes in front and at rear of trains during emergency stops to warn oncoming trains.
- Inspect tracks, cars, and engines for defects and to determine service needs, sending engines and cars for repairs as necessary.
- Start diesel engines to warm engines before runs.
- Make minor repairs to couplings, air hoses, and journal boxes, using hand tools.
- Connect air hoses to cars, using wrenches.
- Operate and drive locomotives, diesel switch engines, dinkey engines, flatcars, and railcars in train yards and at industrial sites.
- Refuel and lubricate engines.
- Ride atop cars that have been shunted, and turn handwheels to control speeds or stop cars at specified positions.
- Adjust controls to regulate air-conditioning, heating, and lighting on trains for comfort of passengers.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Provide passengers with assistance entering and exiting trains.
- Answer questions from passengers concerning train rules, stations, and timetable information.
- Conduct brake tests to determine the condition of brakes on trains.
- Monitor oil, temperature, and pressure gauges on dashboards to determine if engines are operating safely and efficiently.
- Monitor trains as they go around curves to detect dragging equipment and smoking journal boxes.
- Read gauges to verify sufficient levels of hydraulic fluid, air pressure, or oxygen.
- Inspect vessels to ensure efficient and safe operation of vessels and equipment and conformance to regulations.
- Direct courses and speeds of ships, based on specialized knowledge of local winds, weather, water depths, tides, currents, and hazards.
- Prevent ships under navigational control from engaging in unsafe operations.
- Serve as a vessel's docking master upon arrival at a port or at a berth.
- Consult maps, charts, weather reports, or navigation equipment to determine and direct ship movements.
- Steer and operate vessels, using radios, depth finders, radars, lights, buoys, or lighthouses.
- Operate ship-to-shore radios to exchange information needed for ship operations.
- Dock or undock vessels, sometimes maneuvering through narrow spaces, such as locks.
- Stand watches on vessels during specified periods while vessels are under way.
- Report to appropriate authorities any violations of federal or state pilotage laws.
- Provide assistance in maritime rescue operations.
- Signal passing vessels, using whistles, flashing lights, flags, or radios.
- Measure depths of water, using depth-measuring equipment.
- Signal crew members or deckhands to rig tow lines, open or close gates or ramps, or pull guard chains across entries.
- Maintain boats or equipment on board, such as engines, winches, navigational systems, fire extinguishers, or life preservers.
- Maintain records of daily activities, personnel reports, ship positions and movements, ports of call, weather and sea conditions, pollution control efforts, or cargo or passenger status.
- Advise ships' masters on harbor rules and customs procedures.
- Observe loading or unloading of cargo or equipment to ensure that handling and storage are performed according to specifications.
- Calculate sightings of land, using electronic sounding devices and following contour lines on charts.
- Learn to operate new technology systems and procedures through instruction, simulators, or models.
- Direct or coordinate crew members or workers performing activities such as loading or unloading cargo, steering vessels, operating engines, or operating, maintaining, or repairing ship equipment.
- Arrange for ships to be fueled, restocked with supplies, or repaired.
- Supervise crews in cleaning or maintaining decks, superstructures, or bridges.
- Purchase supplies or equipment.
- Tow and maneuver barges or signal tugboats to tow barges to destinations.
- Perform various marine duties, such as checking for oil spills or other pollutants around ports or harbors or patrolling beaches.
- Assign watches or living quarters to crew members.
- Interview and hire crew members.
- Conduct safety drills such as man overboard or fire drills.
- Read gauges to verify sufficient levels of hydraulic fluid, air pressure, or oxygen.
- Inspect vessels to ensure efficient and safe operation of vessels and equipment and conformance to regulations.
- Observe equipment gauges and indicators and hand signals of other workers to verify load positions or depths.
- Move levers, pedals, and throttles to stop, start, and regulate speeds of hoist or winch drums in response to hand, bell, buzzer, telephone, loud-speaker, or whistle signals, or by observing dial indicators or cable marks.
- Start engines of hoists or winches and use levers and pedals to wind or unwind cable on drums.
- Operate compressed air, diesel, electric, gasoline, or steam-driven hoists or winches to control movement of cableways, cages, derricks, draglines, loaders, railcars, or skips.
- Move or reposition hoists, winches, loads and materials, manually or using equipment and machines such as trucks, cars, and hand trucks.
- Select loads or materials according to weight and size specifications.
- Signal and assist other workers loading or unloading materials.
- Attach, fasten, and disconnect cables or lines to loads, materials, and equipment, using hand tools.
- Apply hand or foot brakes and move levers to lock hoists or winches.
- Oil winch drums so that cables will wind smoothly.
- Climb ladders to position and set up vehicle-mounted derricks.
- Repair, maintain, and adjust equipment, using hand tools.
- Tend auxiliary equipment, such as jacks, slings, cables, or stop blocks, to facilitate moving items or materials for further processing.
- Observe equipment gauges and indicators and hand signals of other workers to verify load positions or depths.
- Start aircraft and observe gauges, meters, and other instruments to detect evidence of malfunctions.
- Inspect work of aircraft mechanics performing maintenance, modification, or repair and overhaul of aircraft and aircraft mechanical systems to ensure adherence to standards and procedures.
- Examine maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals.
- Inspect new, repaired, or modified aircraft to identify damage or defects and to assess airworthiness and conformance to standards, using checklists, hand tools, and test instruments.
- Approve or deny issuance of certificates of airworthiness.
- Prepare and maintain detailed repair, inspection, investigation, and certification records and reports.
- Examine landing gear, tires, and exteriors of fuselage, wings, and engines for evidence of damage or corrosion and the need for repairs.
- Recommend replacement, repair, or modification of aircraft equipment.
- Examine aircraft access plates and doors for security.
- Recommend changes in rules, policies, standards, and regulations, based on knowledge of operating conditions, aircraft improvements, and other factors.
- Investigate air accidents and complaints to determine causes.
- Analyze training programs and conduct oral and written examinations to ensure the competency of persons operating, installing, and repairing aircraft equipment.
- Conduct flight test programs to test equipment, instruments, and systems under a variety of conditions, using both manual and automatic controls.
- Schedule and coordinate in-flight testing programs with ground crews and air traffic control to ensure availability of ground tracking, equipment monitoring, and related services.
- Observe flight activities of pilots to assess flying skills and to ensure conformance to flight and safety regulations.
- Start aircraft and observe gauges, meters, and other instruments to detect evidence of malfunctions.
- Monitor gauges or meters that measure speed, amperage, battery charge, or air pressure in brake lines or in main reservoirs.
- Interpret train orders, signals, or railroad rules and regulations that govern the operation of locomotives.
- Confer with conductors or traffic control center personnel via radiophones to issue or receive information concerning stops, delays, or oncoming trains.
- Receive starting signals from conductors and use controls such as throttles or air brakes to drive electric, diesel-electric, steam, or gas turbine-electric locomotives.
- Observe tracks to detect obstructions.
- Call out train signals to assistants to verify meanings.
- Operate locomotives to transport freight or passengers between stations or to assemble or disassemble trains within rail yards.
- Check to ensure that brake examination tests are conducted at shunting stations.
- Respond to emergency conditions or breakdowns, following applicable safety procedures and rules.
- Inspect locomotives to verify adequate fuel, sand, water, or other supplies before each run or to check for mechanical problems.
- Inspect locomotives after runs to detect damaged or defective equipment.
- Prepare reports regarding any problems encountered, such as accidents, signaling problems, unscheduled stops, or delays.
- Check to ensure that documentation, such as procedure manuals or logbooks, are in the driver's cab and available for staff use.
- Monitor train loading procedures to ensure that freight or rolling stock are loaded or unloaded without damage.
- Drive diesel-electric rail-detector cars to transport rail-flaw-detecting machines over tracks.
- Monitor gauges or meters that measure speed, amperage, battery charge, or air pressure in brake lines or in main reservoirs.
- Monitor or review output from systems, such as Thermal Imaging Units (TIU) or roadside imaging tools, to identify high-risk commercial motor vehicles for follow-up inspections.
- Inspect vehicles or other equipment for evidence of abuse, damage, or mechanical malfunction.
- Inspect vehicles or equipment to ensure compliance with rules, standards, or regulations.
- Inspect repairs to transportation vehicles or equipment to ensure that repair work was performed properly.
- Identify modifications to engines, fuel systems, emissions control equipment, or other vehicle systems to determine the impact of modifications on inspection procedures or conclusions.
- Perform low-pressure fuel evaluative tests (LPFET) to test for harmful emissions from vehicles without onboard diagnostics (OBD) equipment.
- Conduct remote inspections of motor vehicles, using handheld controllers and remotely directed vehicle inspection devices.
- Prepare reports on investigations or inspections and actions taken.
- Issue notices and recommend corrective actions when infractions or problems are found.
- Compare emissions findings with applicable emissions standards.
- Investigate and make recommendations on carrier requests for waiver of federal standards.
- Conduct visual inspections of emission control equipment and smoke emitted from gasoline or diesel vehicles.
- Conduct vehicle or transportation equipment tests, using diagnostic equipment.
- Identify emissions testing procedures and standards appropriate for the age and technology of vehicles.
- Investigate incidents or violations, such as delays, accidents, and equipment failures.
- Negotiate with authorities, such as local government officials, to eliminate hazards along transportation routes.
- Review commercial vehicle logs, shipping papers, or driver and equipment records to detect any problems or to ensure compliance with regulations.
- Attach onboard diagnostics (OBD) scanner cables to vehicles to conduct emissions inspections.
- Investigate complaints regarding safety violations.
- Examine carrier operating rules, employee qualification guidelines, or carrier training and testing programs for compliance with regulations or safety standards.
- Evaluate new methods of packaging, testing, shipping, or transporting hazardous materials to ensure adequate public safety protection.
- Monitor or review output from systems, such as Thermal Imaging Units (TIU) or roadside imaging tools, to identify high-risk commercial motor vehicles for follow-up inspections.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Operate consoles to control automatic palletizing equipment.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Operate elevator systems in conjunction with conveyor systems.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Read pressure and temperature gauges or displays and record data in engineering logs.
- Tie barges together into tow units for tugboats to handle, inspecting barges periodically during voyages and disconnecting them when destinations are reached.
- Attach hoses and operate pumps to transfer substances to and from liquid cargo tanks.
- Handle lines to moor vessels to wharfs, to tie up vessels to other vessels, or to rig towing lines.
- Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate navigational aids, such as buoys or lighthouses.
- Maintain government-issued certifications, as required.
- Examine machinery to verify specified pressures or lubricant flows.
- Maintain a ship's engines under the direction of the ship's engineering officers.
- Break out, rig, and stow cargo-handling gear, stationary rigging, or running gear.
- Lubricate machinery, equipment, or engine parts, such as gears, shafts, or bearings.
- Lower and man lifeboats when emergencies occur.
- Sweep, mop, and wash down decks to remove oil, dirt, and debris, using brooms, mops, brushes, and hoses.
- Splice and repair ropes, wire cables, or cordage, using marlinespikes, wire cutters, twine, and hand tools.
- Load or unload materials, vehicles, or passengers from vessels.
- Chip and clean rust spots on decks, superstructures, or sides of ships, using wire brushes and hand or air chipping machines.
- Provide engineers with assistance in repairing or adjusting machinery.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Paint or varnish decks, superstructures, lifeboats, or sides of ships.
- Give directions to crew members engaged in cleaning wheelhouses or quarterdecks.
- Stand by wheels when ships are on automatic pilot, and verify accuracy of courses, using magnetic compasses.
- Steer ships under the direction of commanders or navigating officers or direct helmsmen to steer, following designated courses.
- Relay specified signals to other ships, using visual signaling devices, such as blinker lights or semaphores.
- Overhaul lifeboats or lifeboat gear and lower or raise lifeboats with winches or falls.
- Stand gangway watches to prevent unauthorized persons from boarding ships while in port.
- Record data in ships' logs, such as weather conditions or distances traveled.
- Measure depth of water in shallow or unfamiliar waters, using leadlines, and telephone or shout depth information to vessel bridges.
- Clean and polish wood trim, brass, or other metal parts.
- Participate in shore patrols.
- Read pressure and temperature gauges or displays and record data in engineering logs.
