- Set equipment guides, stops, spacers, or other fixtures.
Occupations with related activities Save Table: XLSX CSV
Shared Activities | Similar Activities | Job Zone | Code | Occupation |
1 | 1 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 49-9094.00 | Locksmiths and Safe Repairers |
1 | 0 | 2 | 51-9196.00 | Paper Goods Machine Setters, Operators, and Tenders |
1 | 0 | 2 | 51-2031.00 | Engine and Other Machine Assemblers |
1 | 0 | 2 | 51-4022.00 | Forging Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 51-7042.00 | Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
1 | 0 | 2 | 51-9032.00 | Cutting and Slicing Machine Setters, Operators, and Tenders |
1 | 0 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
1 | 0 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
- Set equipment guides, stops, spacers, or other fixtures.
- Install mechanical components in production equipment.
- Operate metal or plastic forming equipment.
- Watch operating equipment to detect malfunctions.
- Inspect metal, plastic, or composite products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Study blueprints or other instructions to determine equipment setup requirements.
- Monitor equipment operation to ensure proper functioning.
- Feed materials or products into or through equipment.
- Calculate specific material, equipment, or labor requirements for production.
- Select production equipment according to product specifications.
- Mount attachments or tools onto production equipment.
- Adjust equipment controls to regulate coolant flow.
- Monitor instruments to ensure proper production conditions.
- Operate cutting equipment.
- Operate grinding equipment.
- Reshape metal workpieces to established specifications.
- Signal others to coordinate work activities.
- Record operational or production data.
- Polish materials, workpieces, or finished products.
- Direct operational or production activities.
- Instruct workers to use equipment or perform technical procedures.
- Disassemble equipment for maintenance or repair.
- Sort materials or products for processing, storing, shipping, or grading.
- Set equipment guides, stops, spacers, or other fixtures.
- Install mechanical components in production equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Install mechanical components in production equipment.
- Immerse objects or workpieces in cleaning or coating solutions.
- Adjust flow of electricity to tools or production equipment.
- Operate painting or coating equipment.
- Inspect finishes of workpieces or finished products.
- Monitor equipment operation to ensure proper functioning.
- Record operational or production data.
- Remove products or workpieces from production equipment.
- Operate grinding equipment.
- Trim excess material from workpieces.
- Conduct test runs of production equipment.
- Determine metal or plastic production methods.
- Measure ingredients or substances to be used in production processes.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Measure materials to mark reference points, cutting lines, or other indicators.
- Apply protective or decorative finishes to workpieces or products.
- Study blueprints or other instructions to determine equipment setup requirements.
- Clean workpieces or finished products.
- Feed materials or products into or through equipment.
- Mount materials or workpieces onto production equipment.
- Operate cranes, hoists, or other moving or lifting equipment.
- Clean production equipment.
- Maintain production or processing equipment.
- Adjust equipment controls to regulate flow of production materials or products.
- Load items into ovens or furnaces.
- Mix substances to create chemical solutions.
- Replace worn equipment components.
- Load materials into production equipment.
- Position containers to receive materials or workpieces.
- Connect supply lines to production equipment or tools.
- Lubricate production equipment.
- Heat material or workpieces to prepare for or complete production.
- Cut industrial materials in preparation for fabrication or processing.
- Set equipment guides, stops, spacers, or other fixtures.
- Install mechanical components in production equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Cut materials according to specifications or needs.
- Disassemble equipment for maintenance or repair.
- Fabricate parts or components.
- Repair worn, damaged, or defective mechanical parts.
- Drill holes in parts, equipment, or materials.
- Install hardware or other interior fixtures.
- Replace worn, damaged, or defective mechanical parts.
- Document operational activities.
- Disable door locks.
- Repair structural components.
- Assemble electrical components, subsystems, or systems.
- Refinish wood or metal surfaces.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Adjust equipment to ensure optimal performance.
- Inspect finished products to locate flaws.
- Watch operating equipment to detect malfunctions.
- Mount attachments or tools onto production equipment.
- Cut industrial materials in preparation for fabrication or processing.
- Load materials into production equipment.
- Feed materials or products into or through equipment.
- Adjust temperature controls of ovens or other heating equipment.
- Set equipment controls to meet cutting specifications.
- Disassemble equipment for maintenance or repair.
- Mark products, workpieces, or equipment with identifying information.
- Remove products or workpieces from production equipment.
- Stack finished items for further processing or shipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Plan production or operational procedures or sequences.
- Review blueprints or other instructions to determine operational methods or sequences.
- Inspect installed components or assemblies.
- Align parts or workpieces to ensure proper assembly.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Assemble electromechanical or hydraulic systems.
- Smooth metal surfaces or edges.
- Cut industrial materials in preparation for fabrication or processing.
- Drill holes in parts, equipment, or materials.
- Lay out parts to prepare for assembly.
- Repair parts or assemblies.
- Replace worn equipment components.
- Apply lubricants or coolants to workpieces.
- Operate grinding equipment.
- Operate metal or plastic forming equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Study blueprints or other instructions to determine equipment setup requirements.
- Maneuver workpieces in equipment during production.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Operate metal or plastic forming equipment.
- Operate cutting equipment.
- Mount attachments or tools onto production equipment.
- Remove accessories, tools, or other parts from equipment.
- Conduct test runs of production equipment.
- Exchange information with colleagues.
- Trim excess material from workpieces.
- Maintain production or processing equipment.
- Repair production equipment or tools.
- Replace worn equipment components.
- Select production equipment according to product specifications.
- Operate grinding equipment.
- Sharpen cutting or grinding tools.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Lay out parts to prepare for assembly.
- Watch operating equipment to detect malfunctions.
- Operate grinding equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Calculate dimensions of workpieces, products, or equipment.
- Mount attachments or tools onto production equipment.
- Operate cutting equipment.
- Reshape metal workpieces to established specifications.
- Adjust equipment controls to regulate coolant flow.
- Apply lubricants or coolants to workpieces.
- Lift materials or workpieces using cranes or other lifting equipment.
- Mount materials or workpieces onto production equipment.
- Notify others of equipment repair or maintenance needs.
- Repair production equipment or tools.
- Replace worn equipment components.
- Maintain inventories of materials, equipment, or products.
- Feed materials or products into or through equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Operate woodworking equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Conduct test runs of production equipment.
- Monitor equipment operation to ensure that products are not flawed.
- Set equipment controls to meet cutting specifications.
- Inspect lumber or raw woodstock.
- Mount attachments or tools onto production equipment.
- Determine production equipment settings.
- Feed materials or products into or through equipment.
- Select production input materials.
- Maneuver workpieces in equipment during production.
- Select production equipment according to product specifications.
- Load materials into production equipment.
- Mount materials or workpieces onto production equipment.
- Remove accessories, tools, or other parts from equipment.
- Replace worn equipment components.
- Mark products, workpieces, or equipment with identifying information.
- Stack finished items for further processing or shipment.
- Inspect production equipment.
- Clean production equipment.
- Clean work areas.
- Maintain production or processing equipment.
- Trim excess material from workpieces.
- Remove products or workpieces from production equipment.
- Program equipment to perform production tasks.
- Lubricate production equipment.
- Operate cranes, hoists, or other moving or lifting equipment.
- Sharpen cutting or grinding tools.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Operate cutting equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Study blueprints or other instructions to determine equipment setup requirements.
- Weigh finished products.
- Conduct test runs of production equipment.
- Feed materials or products into or through equipment.
- Operate cranes, hoists, or other moving or lifting equipment.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Mark products, workpieces, or equipment with identifying information.
- Remove products or workpieces from production equipment.
- Stack finished items for further processing or shipment.
- Sort materials or products for processing, storing, shipping, or grading.
- Watch operating equipment to detect malfunctions.
- Set equipment controls to meet cutting specifications.
- Record operational or production data.
- Adjust equipment controls to regulate flow of water, cleaning solutions, or other liquids.
- Move products, materials, or equipment between work areas.
- Position raw materials on processing or production equipment.
- Enter commands, instructions, or specifications into equipment.
- Mount attachments or tools onto production equipment.
- Replace worn equipment components.
- Select production equipment according to product specifications.
- Direct operational or production activities.
- Operate grinding equipment.
- Sharpen cutting or grinding tools.
- Cut industrial materials in preparation for fabrication or processing.
- Clean production equipment.
- Lubricate production equipment.
- Clean materials to prepare them for production.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Mount materials or workpieces onto production equipment.
- Mount attachments or tools onto production equipment.
- Set equipment controls to meet cutting specifications.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Watch operating equipment to detect malfunctions.
- Operate grinding equipment.
- Operate cutting equipment.
- Measure materials to mark reference points, cutting lines, or other indicators.
- Replace worn equipment components.
- Operate metal or plastic forming equipment.
- Select production input materials.
- Clean production equipment.
- Lubricate production equipment.
- Maintain production or processing equipment.
- Smooth metal surfaces or edges.
- Notify others of equipment repair or maintenance needs.
- Repair production equipment or tools.
- Adjust equipment controls to regulate coolant flow.
- Adjust equipment controls to regulate flow of production materials or products.
- Adjust equipment controls to regulate flow of water, cleaning solutions, or other liquids.
- Calculate dimensions of workpieces, products, or equipment.
- Instruct workers to use equipment or perform technical procedures.
- Program equipment to perform production tasks.
- Write computer programming code.
- Record operational or production data.
- Clear equipment jams.
- Align parts or workpieces to ensure proper assembly.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Set equipment controls to meet cutting specifications.
- Mount attachments or tools onto production equipment.
- Inspect lumber or raw woodstock.
- Trim excess material from workpieces.
- Clear equipment jams.
- Monitor equipment operation to ensure proper functioning.
- Replace worn equipment components.
- Sharpen cutting or grinding tools.
- Operate cutting equipment.
- Maneuver workpieces in equipment during production.
- Count finished products or workpieces.
- Sort materials or products for processing, storing, shipping, or grading.
- Stack finished items for further processing or shipment.
- Mount materials or workpieces onto production equipment.
- Position raw materials on processing or production equipment.
- Measure materials to mark reference points, cutting lines, or other indicators.
- Operate woodworking equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Select production input materials.
- Study blueprints or other instructions to determine equipment setup requirements.
- Cut industrial materials in preparation for fabrication or processing.
- Shape metal workpieces with hammers or other small hand tools.
- Remove products or workpieces from production equipment.
- Clean production equipment.
- Lubricate production equipment.
- Dispose of trash or waste materials.
- Lift materials or workpieces using cranes or other lifting equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Inspect metal, plastic, or composite products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Sort materials or products for processing, storing, shipping, or grading.
- Operate cutting equipment.
- Monitor equipment operation to ensure that products are not flawed.
- Record operational or production data.
- Mount attachments or tools onto production equipment.
- Inspect production equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Mount materials or workpieces onto production equipment.
- Align parts or workpieces to ensure proper assembly.
- Load materials into production equipment.
- Operate metal or plastic forming equipment.
- Clean production equipment.
- Lubricate production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Set equipment controls to meet cutting specifications.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Clean work areas.
- Plan production or operational procedures or sequences.
- Operate forklifts or other loaders.
- Adjust equipment controls to regulate coolant flow.
- Feed materials or products into or through equipment.
- Operate grinding equipment.
- Apply lubricants or coolants to workpieces.
- Disassemble equipment for maintenance or repair.
- Remove accessories, tools, or other parts from equipment.
- Replace worn equipment components.
- Smooth metal surfaces or edges.
- Cut industrial materials in preparation for fabrication or processing.
- Select production equipment according to product specifications.
- Heat material or workpieces to prepare for or complete production.
- Sharpen cutting or grinding tools.
- Set equipment guides, stops, spacers, or other fixtures.
- Set equipment guides, stops, spacers, or other fixtures.
- Inspect metal, plastic, or composite products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Monitor equipment operation to ensure that products are not flawed.
- Operate metal or plastic forming equipment.
- Adjust temperature controls of ovens or other heating equipment.
- Review blueprints or other instructions to determine operational methods or sequences.
- Study blueprints or other instructions to determine equipment setup requirements.
- Monitor instruments to ensure proper production conditions.
- Connect supply lines to production equipment or tools.
- Remove accessories, tools, or other parts from equipment.
- Apply lubricants or coolants to workpieces.
- Operate cranes, hoists, or other moving or lifting equipment.
- Mount attachments or tools onto production equipment.
- Apply protective or decorative finishes to workpieces or products.
- Clean production equipment.
- Lubricate production equipment.
- Maintain production or processing equipment.
- Package products for storage or shipment.
- Remove products or workpieces from production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Move products, materials, or equipment between work areas.
- Remove workpieces from molds.
- Maintain inventories of materials, equipment, or products.
- Record operational or production data.
- Repair templates, patterns, or molds.
- Replace worn equipment components.
- Select production equipment according to product specifications.
- Select production input materials.
- Load materials into production equipment.
- Fill cracks, imperfections, or holes in products or workpieces.
- Smooth metal surfaces or edges.
- Mix substances to create chemical solutions.
- Mount materials or workpieces onto production equipment.
- Operate grinding equipment.
- Trim excess material from workpieces.
- Apply parting agents or other solutions to molds.
- Heat material or workpieces to prepare for or complete production.
- Place materials into molds.
- Load items into ovens or furnaces.
- Build production molds.
- Skim impurities from molten metal.
- Set equipment guides, stops, spacers, or other fixtures.