- Mix finish ingredients to obtain desired colors or shades.
Occupations with related tasks Save Table: XLSX CSV
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
- Clean and maintain tools and equipment, using solvents, brushes, and rags.
- Read job orders and inspect workpieces to determine work procedures and materials required.
- Immerse workpieces into coating materials for specified times.
- Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Melt or heat coating materials to specified temperatures.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Cut out sections in surfaces of materials to be inlaid with decorative pieces, using patterns and knives or scissors.
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Make orthotic or prosthetic devices, using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand or power tools.
- Bend, form, and shape fabric or material to conform to prescribed contours of structural components.
- Construct or receive casts or impressions of patients' torsos or limbs for use as cutting and fabrication patterns.
- Repair, modify, or maintain medical supportive devices, such as artificial limbs, braces, or surgical supports, according to specifications.
- Cover or pad metal or plastic structures or devices, using coverings such as rubber, leather, felt, plastic, or fiberglass.
- Test medical supportive devices for proper alignment, movement, or biomechanical stability, using meters and alignment fixtures.
- Lay out and mark dimensions of parts, using templates and precision measuring instruments.
- Fit appliances onto patients, and make any necessary adjustments.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Take patients' body or limb measurements for use in device construction.
- Instruct patients in use of prosthetic or orthotic devices.
- Service or repair machinery used in the fabrication of appliances.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.
- Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.
- Test appliances for conformance to specifications and accuracy of occlusion, using articulators and micrometers.
- Fabricate, alter, or repair dental devices, such as dentures, crowns, bridges, inlays, or appliances for straightening teeth.
- Place tooth models on an apparatus that mimics bite and movement of patient's jaw to evaluate functionality of model.
- Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.
- Train or supervise other dental technicians or dental laboratory bench workers.
- Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.
- Rebuild or replace linings, wire sections, or missing teeth to repair dentures.
- Apply porcelain paste or wax over prosthesis frameworks or setups, using brushes and spatulas.
- Build and shape wax teeth, using small hand instruments and information from observations or dentists' specifications.
- Load newly constructed teeth into porcelain furnaces to bake the porcelain onto the metal framework.
- Mold wax over denture setups to form the full contours of artificial gums.
- Create a model of patient's mouth by pouring plaster into a dental impression and allowing plaster to set.
- Prepare wax bite blocks and impression trays for use.
- Shape and solder wire and metal frames or bands for dental products, using soldering irons and hand tools.
- Fill chipped or low spots in surfaces of devices, using acrylic resins.
- Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.
- Obtain or mix inks and fill ink fountains.
- Start presses and pull proofs to check for ink coverage and density, alignment, and registration.
- Examine job orders to determine quantities to be printed, stock specifications, colors, or special printing instructions.
- Adjust ink fountain flow rates.
- Verify that paper and ink meet the specifications for a given job.
- Collect and inspect random samples during print runs to identify any necessary adjustments.
- Feed paper through press cylinders and adjust feed and tension controls.
- Monitor automated press operation systems and respond to fault, error, or alert messages.
- Load presses with paper and make necessary adjustments, according to paper size.
- Secure printing plates to printing units and adjust tolerances.
- Clean ink fountains, plates, or printing unit cylinders when press runs are completed.
- Change press plates, blankets, or cylinders, as required.
- Input production job settings into workstation terminals that control automated printing systems.
- Clean or oil presses or make minor repairs, using hand tools.
- Maintain time or production records.
- Monitor inventory levels on a regular basis, ordering or requesting additional supplies, as necessary.
- Monitor environmental factors, such as humidity and temperature, that may impact equipment performance and make necessary adjustments.
- Download or scan files to be printed, using printing production software.
- Adjust digital files to alter print elements, such as fonts, graphics, or color separations.
- Direct or monitor work of press crews.
- Download completed jobs to archive media so that questions can be answered or jobs replicated.
- Control workflow scheduling or job tracking, using computer database software.
- Set up or operate auxiliary equipment, such as cutting, folding, plate-making, drilling, or laminating machines.
- Obtain or mix inks and fill ink fountains.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Operate gas or electric kilns to fire pottery pieces.
- Raise and shape clay into wares, such as vases and pitchers, on revolving wheels, using hands, fingers, and thumbs.
- Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner.
- Position balls of clay in centers of potters' wheels, and start motors or pump treadles with feet to revolve wheels.
- Move pieces from wheels so that they can dry.
- Prepare work for sale or exhibition, and maintain relationships with retail, pottery, art, and resource networks that can facilitate sale or exhibition of work.
- Attach handles to pottery pieces.
- Press thumbs into centers of revolving clay to form hollows, and press on the inside and outside of emerging clay cylinders with hands and fingers, gradually raising and shaping clay to desired forms and sizes.
- Pack and ship pottery to stores or galleries for retail sale.
- Smooth surfaces of finished pieces, using rubber scrapers and wet sponges.
- Pull wires through bases of articles and wheels to separate finished pieces.
- Design spaces to display pottery for sale.
- Verify accuracy of shapes and sizes of objects, using calipers and templates.
- Examine finished ware for defects and measure dimensions, using rule and thickness gauge.
- Maintain supplies of tools, equipment, and materials, and order additional supplies as needed.
- Operate pug mills to blend and extrude clay.
- Perform test-fires of pottery to determine how to achieve specific colors and textures.
- Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency.
- Operate drying chambers to dry or finish molded ceramic ware.
- Adjust pressures, temperatures, and trimming tool settings as required.
- Design clay forms and molds, and decorations for forms.
- Teach pottery classes.
- Operate jigger machines to form ceramic ware, such as bowls, cups, plates, and saucers.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Mix solutions such as developing solutions and colored coating solutions.
- Generate prepress proofs in digital or other format to approximate the appearance of the final printed piece.
- Proofread and perform quality control of text and images.
- Enter, position, and alter text size, using computers, to make up and arrange pages so that printed materials can be produced.
- Perform "preflight" check of required font, graphic, text and image files to ensure completeness prior to delivery to printer.
- Operate and maintain laser plate-making equipment that converts electronic data to plates without the use of film.
- Enter, store, and retrieve information on computer-aided equipment.
- Maintain, adjust, and clean equipment, and perform minor repairs.
- Operate presses to print proofs of plates, monitoring printing quality to ensure that it is adequate.
- Select proper types of plates according to press run lengths.
- Examine finished plates to detect flaws, verify conformity with master plates, and measure dot sizes and centers, using light boxes and microscopes.
- Punch holes in light-sensitive plates and insert pins in holes to prepare plates for contact with positive or negative film.
- Examine unexposed photographic plates to detect flaws or foreign particles prior to printing.
- Examine photographic images for obvious imperfections prior to plate making.
- Arrange and mount typeset material and illustrations into paste-ups for printing reproduction, based on artists' or editors' layouts.
- Operate and maintain a variety of cameras and equipment, such as process, line, halftone, and color separation cameras, enlargers, electronic scanners, and contact equipment.
- Scale copy for reductions and enlargements, using proportion wheels.
- Perform tests to determine lengths of exposures, by exposing plates, scanning line copy, and comparing exposures to tone range scales.
- Analyze originals to evaluate color density, gradation highlights, middle tones, and shadows, using densitometers and knowledge of light and color.
- Activate scanners to produce positive or negative films for the black-and-white, cyan, yellow, and magenta separations from each original copy.
- Set scanners to specific color densities, sizes, screen rulings, and exposure adjustments, using scanner keyboards or computers.
- Perform minor deletions, additions, or corrections to completed plates, on or off printing presses, using tusche, printing ink, erasers, and needles.
- Inspect developed film for specified results and quality, using magnifying glasses and scopes, forwarding acceptable negatives or positives to other workers or to customers.
- Perform close alignment or registration of double and single flats to sensitized plates prior to exposure to produce composite images.
- Mount negatives and plates in cameras, set exposure controls, and expose plates to light through negatives to transfer images onto plates.
- Mix solutions such as developing solutions and colored coating solutions.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Prepare and apply stencils, computer-generated decals, or other decorative items to finished products.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Weigh, mix, and melt metal alloys or materials needed for jewelry models.
- Position stones and metal pieces, and set, mount, and secure items in place, using setting and hand tools.
- Smooth soldered joints and rough spots, using hand files and emery paper, and polish smoothed areas with polishing wheels or buffing wire.
- Create jewelry from materials such as gold, silver, platinum, and precious or semiprecious stones.
- Make repairs, such as enlarging or reducing ring sizes, soldering pieces of jewelry together, and replacing broken clasps and mountings.
- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Select and acquire metals and gems for designs.
- Compute costs of labor and materials to determine production costs of products and articles.
- Examine assembled or finished products to ensure conformance to specifications, using magnifying glasses or precision measuring instruments.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Construct preliminary models of wax, metal, clay, or plaster, and form sample castings in molds.
- Pour molten metal alloys or other materials into molds to cast models of jewelry.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Soften metal to be used in designs by heating it with a gas torch and shape it, using hammers and dies.
- Determine appraised values of diamonds and other gemstones based on price guides, market fluctuations, and stone grades and rarity.
- Grade stones based on their color, perfection, and quality of cut.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Write or modify design specifications such as the metal contents and weights of items.
- Create new jewelry designs and modify existing designs, using computers as necessary.
- Buy and sell jewelry, or serve as agents between buyers and sellers.
- Record the weights and processing times of finished pieces.
- Lay out designs on metal stock, and cut along markings to fabricate pieces used to cast metal molds.
- Mark, engrave, or emboss designs on metal pieces such as castings, wire, or jewelry, following specifications.
- Cut designs in molds or other materials to be used as models in the fabrication of metal and jewelry products.
- Design and fabricate molds, models, and machine accessories, and modify hand tools used to cast metal and jewelry pieces.
- Research and analyze reference materials, and consult with interested parties to develop new products or modify existing designs.
- Anneal precious metal objects such as coffeepots, tea sets, and trays in gas ovens for prescribed times to soften metal for reworking.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Rout out locations where parts are to be joined to items, using routing machines.
- Weigh, mix, and melt metal alloys or materials needed for jewelry models.