- Operate or tend machines to wash and remove impurities from items such as barrels or kegs, glass products, tin plate surfaces, dried fruit, pulp, animal stock, coal, manufactured articles, plastic, or rubber.
Occupations with related tasks Save Table: XLSX CSV
- Operate machinery used in the production process, or assist machine operators.
- Start machines or equipment to begin production processes.
- Load and unload items from machines, conveyors, and conveyances.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Change machine gears, using wrenches.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Wash work areas, machines, equipment, vehicles, or products.
- Fold products and product parts during processing.
- Break up defective products for reprocessing.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Cut or break flashing from materials or products.
- Operate machinery used in the production process, or assist machine operators.
- Start machines or equipment to begin production processes.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Collect cash payments from customers, and make change or charge purchases to customers' credit cards, providing customers with receipts.
- Check tire pressure and levels of fuel, motor oil, transmission, radiator, battery, or other fluids, adding air or fluids as required.
- Perform minor repairs, such as adjusting brakes, replacing spark plugs, or changing engine oil or filters.
- Clean parking areas, offices, restrooms, or equipment, and remove trash.
- Order stock, and price and shelve incoming goods.
- Sell and install accessories, such as batteries, windshield wiper blades, fan belts, bulbs, or headlamps.
- Grease and lubricate vehicles or specified units, such as springs, universal joints, or steering knuckles, using grease guns or spray lubricants.
- Rotate, test, and repair or replace tires.
- Prepare daily reports of fuel, oil, and accessory sales.
- Clean windshields.
- Activate fuel pumps and fill fuel tanks of vehicles with gasoline or diesel fuel to specified levels.
- Test and charge batteries.
- Maintain customer records and follow up periodically with telephone, mail, or personal reminders of services due.
- Provide customers with information about local roads or highways.
- Operate car washes.
- Select, calibrate, or operate equipment used in the non-destructive testing of products or materials.
- Interpret the results of all methods of non-destructive testing (NDT), such as acoustic emission, electromagnetic, leak, liquid penetrant, magnetic particle, neutron radiographic, radiographic, thermal or infrared, ultrasonic, vibration analysis, and visual testing.
- Interpret or evaluate test results in accordance with applicable codes, standards, specifications, or procedures.
- Identify defects in solid materials, using ultrasonic testing techniques.
- Make radiographic images to detect flaws in objects while leaving objects intact.
- Prepare reports on non-destructive testing results.
- Visually examine materials, structures, or components for signs of corrosion, metal fatigue, cracks, or other flaws, using tools and equipment such as endoscopes, closed-circuit television systems, and fiber optics.
- Examine structures or vehicles such as aircraft, trains, nuclear reactors, bridges, dams, and pipelines, using non-destructive testing techniques.
- Document non-destructive testing methods, processes, or results.
- Produce images of objects on film, using radiographic techniques.
- Supervise or direct the work of non-destructive testing trainees or staff.
- Conduct liquid penetrant tests to locate surface cracks by coating objects with fluorescent dyes, cleaning excess penetrant, and applying developer.
- Map the presence of imperfections within objects, using sonic measurements.
- Develop or use new non-destructive testing methods, such as acoustic emission testing, leak testing, and thermal or infrared testing.
- Identify defects in concrete or other building materials, using thermal or infrared testing.
- Evaluate material properties, using radio astronomy, voltage and amperage measurement, or rheometric flow measurement.
- Select, calibrate, or operate equipment used in the non-destructive testing of products or materials.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Document test results, using cameras, spreadsheets, documents, or other tools.
- Read and interpret blueprints, schematics, work specifications, drawings, or charts.
- Inspect or test parts to determine nature or cause of defects or malfunctions.
- Monitor computer-controlled test equipment, according to written or verbal instructions.
- Analyze test data for automotive systems, subsystems, or component parts.
- Install equipment, such as instrumentation, test equipment, engines, or aftermarket products, to ensure proper interfaces.
- Perform or execute manual or automated tests of automotive system or component performance, efficiency, or durability.
- Maintain test equipment in operational condition by performing routine maintenance or making minor repairs or adjustments as needed.
- Analyze performance of vehicles or components that have been redesigned to increase fuel efficiency, such as camless or dual-clutch engines or alternative types of air-conditioning systems.
- Improve fuel efficiency by testing vehicles or components that use lighter materials, such as aluminum, magnesium alloy, or plastic.
- Fabricate new or modify existing prototype components or fixtures.
- Order new test equipment, supplies, or replacement parts.
- Recommend product or component design improvements, based on test data or observations.
- Recommend tests or testing conditions in accordance with designs, customer requirements, or industry standards to ensure test validity.
- Test performance of vehicles that use alternative fuels, such as alcohol blends, natural gas, liquefied petroleum gas, biodiesel, nano diesel, or alternative power methods, such as solar energy or hydrogen fuel cells.
- Participate in research or testing of computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Build instrumentation or laboratory test equipment for special purposes.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Press buttons to activate cleaning equipment or machines.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Connect hoses or lines to pumps or other equipment.
- Collect and test samples of cleaning solutions or vapors.
- Clean the plastic work inside cars, using paintbrushes.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Press buttons to activate cleaning equipment or machines.
- Operate robots to perform customized tasks, such as environmental cleanup or explosive detection operations.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics.
- Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors.
- Maintain service records of robotic equipment or automated production systems.
- Modify computer-controlled robot movements.
- Perform preventive or corrective maintenance on robotic systems or components.
- Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
- Attach wires between controllers.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Train customers or other personnel to install, use, or maintain robots.
- Build or assemble robotic devices or systems.
- Document robotics test procedures and results.
- Assist engineers in the design, configuration, or application of robotic systems.
- Install new robotic systems in stationary positions or on tracks.
- Program complex robotic systems, such as vision systems.
- Develop robotic path motions to maximize efficiency, safety, and quality.
- Fabricate housings, jigs, fittings, or fixtures, using metalworking machines.
- Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples.
- Inspect installation sites.
- Maintain inventories of robotic production supplies, such as sensors or cables.
- Develop three-dimensional simulations of automation systems.
- Operate robots to perform customized tasks, such as environmental cleanup or explosive detection operations.
- Install, calibrate, operate, or maintain robots.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Evaluate robotic systems or prototypes.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Install, calibrate, operate, or maintain robots.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
- Develop operation, safety, and maintenance procedures or assist in their development.
- Test electrical systems to determine voltages, using voltage meters.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Weigh, measure, and record fuel used.
- Receive instructions from steam engineers regarding steam plant and air compressor operations.
- Install burners and auxiliary equipment, using hand tools.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
- Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
- Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
- Investigate and report on accidents.
- Ignite fuel in burners, using torches or flames.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Plan or conduct experiments to validate new materials, optimize startup protocols, reduce conditioning time, or examine contaminant tolerance.
- Provide technical consultation or direction related to the development or production of fuel cell systems.
- Characterize component or fuel cell performances by generating operating maps, defining operating conditions, identifying design refinements, or executing durability assessments.
- Plan or implement fuel cell cost reduction or product improvement projects in collaboration with other engineers, suppliers, support personnel, or customers.
- Conduct fuel cell testing projects, using fuel cell test stations, analytical instruments, or electrochemical diagnostics, such as cyclic voltammetry or impedance spectroscopy.
- Analyze fuel cell or related test data, using statistical software.
- Conduct post-service or failure analyses, using electromechanical diagnostic principles or procedures.
- Define specifications for fuel cell materials.
- Recommend or implement changes to fuel cell system designs.
- Validate design of fuel cells, fuel cell components, or fuel cell systems.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products.
- Develop fuel cell materials or fuel cell test equipment.
- Fabricate prototypes of fuel cell components, assemblies, stacks, or systems.
- Manage fuel cell battery hybrid system architecture, including sizing of components, such as fuel cells, energy storage units, or electric drives.
- Design or implement fuel cell testing or development programs.
- Write technical reports or proposals related to engineering projects.
- Simulate or model fuel cell, motor, or other system information, using simulation software programs.
- Design fuel cell systems, subsystems, stacks, assemblies, or components, such as electric traction motors or power electronics.
- Identify or define vehicle and system integration challenges for fuel cell vehicles.
- Calculate the efficiency or power output of a fuel cell system or process.
- Coordinate fuel cell engineering or test schedules with departments outside engineering, such as manufacturing.
- Authorize release of fuel cell parts, components, or subsystems for production.
- Evaluate the power output, system cost, or environmental impact of new hydrogen or non-hydrogen fuel cell system designs.
- Integrate electric drive subsystems with other vehicle systems to optimize performance or mitigate faults.
- Develop or evaluate systems or methods of hydrogen storage for fuel cell applications.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Analyze system performance or operational requirements.
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Develop or test photonic prototypes or models.
- Design, integrate, or test photonics systems or components.
- Assist in the transition of photonic prototypes to production.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Write reports or proposals related to photonics research or development projects.
- Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components.
- Determine applications of photonics appropriate to meet product objectives or features.
- Conduct research on new photonics technologies.
- Design electro-optical sensing or imaging systems.
- Document photonics system or component design processes, including objectives, issues, or outcomes.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Train operators, engineers, or other personnel.
- Analyze, fabricate, or test fiber-optic links.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Create or maintain photonic design histories.
- Oversee or provide expertise on manufacturing, assembly, or fabrication processes.
- Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices.
- Design solar energy photonics or other materials or devices to generate energy.
- Design or redesign optical fibers to minimize energy loss.
- Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Develop, test, or program new robots.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Test and analyze thermodynamic systems for renewable energy applications, such as solar or wind, to maximize energy production.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
- Analyze, estimate, or report production costs.
- Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures.
- Calibrate or adjust equipment to ensure quality production, using tools such as calipers, micrometers, height gauges, protractors, or ring gauges.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Coordinate equipment purchases, installations, or transfers.
- Create or interpret engineering drawings, schematic diagrams, formulas, or blueprints for management or engineering staff.
- Design plant layouts or production facilities.
- Develop manufacturing infrastructure to integrate or deploy new manufacturing processes.
- Develop or implement programs to address problems related to production, materials, safety, or quality.
- Develop production, inventory, or quality assurance programs.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Identify opportunities for improvements in quality, cost, or efficiency of automation equipment.
- Monitor and adjust production processes or equipment for quality and productivity.
- Oversee equipment start-up, characterization, qualification, or release.
- Oversee or inspect production processes.
- Prepare layouts, drawings, or sketches of machinery or equipment, such as shop tooling, scale layouts, or new equipment design, using drafting equipment or computer-aided design (CAD) software.
- Prepare production documents, such as standard operating procedures, manufacturing batch records, inventory reports, or productivity reports.
- Provide advice or training to other technicians.
- Recommend corrective or preventive actions to assure or improve product quality or reliability.
- Select cleaning materials, tools, or equipment.
- Select material quantities or processing methods needed to achieve efficient production.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Maintain clean working environments, according to clean room standards.
- Compute or record photonic test data.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Assist scientists or engineers in the conduct of photonic experiments.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Monitor inventory levels and order supplies as necessary.
- Repair or calibrate products, such as surgical lasers.
- Monitor mechanical factors, such as turbine load or strain information.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Design, build, or modify fixtures used to assemble parts.
- Splice fibers, using fusion splicing or other techniques.
- Optimize photonic process parameters by making prototype or production devices.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Lay out cutting lines for machining, using drafting tools.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Build photonics tools to be applied to electrical grids to detect hot spots, such as failing insulators or conductors.
- Assemble devices or equipment to be used in green technology applications, including solar energy, high efficiency solid state lighting, energy management, smart buildings, or green processes.
- Develop solar power sources for lasers used in fiber optics.
- Fabricate sensors to be used to control wind turbines.
- Perform laser seam welding, heat treatment, or hard facing operations.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
