- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
Occupations with related tasks Save Table: XLSX CSV
- Examine or test operation of parts or systems to ensure completeness of repairs.
- Explain proper operation of vehicle systems to customers.
- Locate and repair frayed wiring, broken connections, or incorrect wiring, using ohmmeters, soldering irons, tape, or hand tools.
- Repair plumbing or propane gas lines, using caulking compounds and plastic or copper pipe.
- Confer with customers, read work orders, or examine vehicles needing repair to determine the nature and extent of damage.
- Connect electrical systems to outside power sources, and activate switches to test the operation of appliances or light fixtures.
- Connect water hoses to inlet pipes of plumbing systems, and test operation of toilets or sinks.
- Inspect recreational vehicles to diagnose problems and perform necessary adjustment, repair, or overhaul.
- Inspect, repair, or replace brake systems.
- Diagnose and repair furnace or air conditioning systems.
- Repair leaks with caulking compound or replace pipes, using pipe wrenches.
- List parts needed, estimate costs, and plan work procedures, using parts lists, technical manuals, or diagrams.
- Remove damaged exterior panels, and repair and replace structural frame members.
- Open and close doors, windows, or drawers to test their operation, trimming edges to fit, as necessary.
- Reset hardware, using chisels, mallets, and screwdrivers.
- Refinish wood surfaces on cabinets, doors, moldings, or floors, using power sanders, putty, spray equipment, brushes, paints, or varnishes.
- Seal open sides of modular units to prepare them for shipment, using polyethylene sheets, nails, and hammers.
- Examine or test operation of parts or systems to ensure completeness of repairs.
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Repair and replace damaged or worn parts.
- Operate and inspect machines or heavy equipment to diagnose defects.
- Read and understand operating manuals, blueprints, and technical drawings.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Overhaul and test machines or equipment to ensure operating efficiency.
- Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
- Repair, rewire, and troubleshoot electrical systems.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Examine parts for damage or excessive wear, using micrometers and gauges.
- Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
- Research, order, and maintain parts inventory for services and repairs.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Assemble gear systems, and align frames and gears.
- Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
- Adjust and maintain industrial machinery, using control and regulating devices.
- Fabricate needed parts or items from sheet metal.
- Direct workers who are assembling or disassembling equipment or cleaning parts.
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Test units for operability before and after repairs.
- Record conditions of cars, and repair and maintenance work performed or to be performed.
- Inspect components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Repair or replace defective or worn parts such as bearings, pistons, and gears, using hand tools, torque wrenches, power tools, and welding equipment.
- Inspect the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Remove locomotives, car mechanical units, or other components, using pneumatic hoists and jacks, pinch bars, hand tools, and cutting torches.
- Adjust repaired or replaced units as needed to ensure proper operation.
- Repair, fabricate, and install steel or wood fittings, using blueprints, shop sketches, and instruction manuals.
- Perform scheduled maintenance, and clean units and components.
- Examine car roofs for wear and damage, and repair defective sections, using roofing material, cement, nails, and waterproof paint.
- Paint car exteriors, interiors, and fixtures.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Disassemble units such as water pumps, control valves, and compressors so that repairs can be made.
- Measure diameters of axle wheel seats, using micrometers, and mark dimensions on axles so that wheels can be bored to specified dimensions.
- Test electrical systems of cars by operating systems and using testing equipment such as ammeters.
- Replace defective wiring and insulation, and tighten electrical connections, using hand tools.
- Install and repair interior flooring, fixtures, walls, plumbing, steps, and platforms.
- Repair window sash frames, attach weather stripping and channels to frames, and replace window glass, using hand tools.
- Align car sides for installation of car ends and crossties, using width gauges, turnbuckles, and wrenches.
- Repair car upholstery.
- Test units for operability before and after repairs.
- Inspect, test, and measure completed work, using devices such as hand tools or gauges to verify conformance to standards or repair requirements.
- Inspect and monitor work areas, examine tools and equipment, and provide employee safety training to prevent, detect, and correct unsafe conditions or violations of procedures and safety rules.
- Interpret specifications, blueprints, or job orders to construct templates and lay out reference points for workers.
- Monitor employees' work levels and review work performance.
- Perform skilled repair or maintenance operations, using equipment such as hand or power tools, hydraulic presses or shears, or welding equipment.
- Compute estimates and actual costs of factors such as materials, labor, or outside contractors.
- Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions.
- Requisition materials and supplies, such as tools, equipment, or replacement parts.
- Confer with personnel, such as management, engineering, quality control, customer, or union workers' representatives, to coordinate work activities, resolve employee grievances, or identify and review resource needs.
- Determine schedules, sequences, and assignments for work activities, based on work priority, quantity of equipment, and skill of personnel.
- Examine objects, systems, or facilities and analyze information to determine needed installations, services, or repairs.
- Counsel employees about work-related issues and assist employees to correct job-skill deficiencies.
- Recommend or initiate personnel actions, such as hires, promotions, transfers, discharges, or disciplinary measures.
- Investigate accidents or injuries and prepare reports of findings.
- Conduct or arrange for worker training in safety, repair, or maintenance techniques, operational procedures, or equipment use.
- Develop, implement, or evaluate maintenance policies and procedures.
- Meet with vendors or suppliers to discuss products used in repair work.
- Participate in budget preparation and administration, coordinating purchasing and documentation and monitoring departmental expenditures.
- Review, evaluate, accept, and coordinate completion of work bid from contractors.
- Compile operational or personnel records, such as time and production records, inventory data, repair or maintenance statistics, or test results.
- Develop or implement electronic maintenance programs or computer information management systems.
- Design equipment configurations to meet personnel needs.
- Inspect, test, and measure completed work, using devices such as hand tools or gauges to verify conformance to standards or repair requirements.
- Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling.
- File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools.
- Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools.
- Prime and paint repaired surfaces, using paint sprayguns and motorized sanders.
- Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take.
- Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.
- Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components.
- Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers.
- Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete.
- Review damage reports, prepare or review repair cost estimates, and plan work to be performed.
- Fill small dents that cannot be worked out with plastic or solder.
- Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment.
- Remove small pits and dimples in body metal, using pick hammers and punches.
- Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders.
- Mix polyester resins and hardeners to be used in restoring damaged areas.
- Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets.
- Adjust or align headlights, wheels, and brake systems.
- Replace damaged glass on vehicles.
- Remove damaged panels, and identify the family and properties of the plastic used on a vehicle.
- Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand.
- Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures.
- Soak fiberglass matting in resin mixtures and apply layers of matting over repair areas to specified thicknesses.
- Read specifications or confer with customers to determine the desired custom modifications for altering the appearance of vehicles.
- Cut openings in vehicle bodies for the installation of customized windows, using templates and power shears or chisels.
- Measure and mark vinyl material and cut material to size for roof installation, using rules, straightedges, and hand shears.
- Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Inspect airframes for wear or other defects.
- Measure parts for wear, using precision instruments.
- Obtain fuel and oil samples and check them for contamination.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Measure the tension of control cables.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Clean, refuel, and change oil in line service aircraft.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Cure bonded structures, using portable or stationary curing equipment.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Determine repair limits for engine hot section parts.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Prepare and paint aircraft surfaces.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
