- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
Occupations with related tasks Save Table: XLSX CSV
- Change water filters.
- Unload and assemble pipes and pumping equipment, using hand tools.
- Monitor pumps and flow lines for gas and fluid leaks.
- Gauge oil and gas production.
- Start compressor engines and divert oil from storage tanks into compressor units and auxiliary equipment to recover natural gas from oil.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Operate engines and pumps to shut off wells according to production schedules, and to switch flow of oil into storage tanks.
- Repair gas and oil meters and gauges.
- Perform routine maintenance on vehicles and equipment.
- Open valves to return compressed gas to bottoms of specified wells to repressurize them and force oil to surface.
- Prepare trucks and equipment necessary for the type of pumping service required.
- Attach pumps and hoses to wellheads.
- Mix acids, chemicals, or dry cement as required for a specific job.
- Supervise oil pumpers and other workers engaged in producing oil from wells.
- Drive trucks to transport high-pressure pumping equipment, and chemicals, fluids, or gases to be pumped into wells.
- Control pumping and blending equipment to acidize, cement, or fracture gas or oil wells and permeable rock formations.
- Change water filters.
- Unload and assemble pipes and pumping equipment, using hand tools.
- Seal outlet valves on tank cars, barges, and trucks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Seal outlet valves on tank cars, barges, and trucks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Press buttons to activate cleaning equipment or machines.
- Connect hoses or lines to pumps or other equipment.
- Collect and test samples of cleaning solutions or vapors.
- Clean the plastic work inside cars, using paintbrushes.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Operate consoles to control automatic palletizing equipment.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Affix identifying information to materials or products, using hand tools.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Operate elevator systems in conjunction with conveyor systems.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Install motorcycle accessories.
- Reassemble frames and reinstall engines after repairs.
- Reassemble and test subassembly units.
- Mount, balance, change, or check condition or pressure of tires.
- Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.
- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, or generators.
- Connect test panels to engines and measure generator output, ignition timing, or other engine performance indicators.
- Listen to engines, examine vehicle frames, or confer with customers to determine nature and extent of malfunction or damage.
- Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline or oil tanks, starters, or mufflers.
- Disassemble subassembly units and examine condition, movement, or alignment of parts, visually or using gauges.
- Repair or adjust motorcycle subassemblies, such as forks, transmissions, brakes, or drive chains, according to specifications.
- Remove cylinder heads and grind valves to scrape off carbon and replace defective valves, pistons, cylinders, or rings, using hand and power tools.
- Hammer out dents and bends in frames and weld tears and breaks.
- Install motorcycle accessories.
- Reassemble frames and reinstall engines after repairs.
- Reassemble and test subassembly units.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Determine load weights and check them against lifting capacities to prevent overload.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Weigh bundles, using floor scales, and record weights for company records.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Hook tow trucks to trailer hitches and fasten attachments, such as graders, plows, rollers, or winch cables to tractors, using hitchpins.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
- Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between loading, processing, and storage areas.
- Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other transport vehicles.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
- Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and complete delivery.
- Signal workers to discharge, dump, or level materials.
- Weigh materials or products and record weight or other production data on tags or labels.
- Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging batteries, fueling, or replacing liquefied-gas tank.
- Operate or tend automatic stacking, loading, packaging, or cutting machines.
- Turn valves and open chutes to dump, spray, or release materials from dump cars or storage bins into hoppers.
- Hook tow trucks to trailer hitches and fasten attachments, such as graders, plows, rollers, or winch cables to tractors, using hitchpins.
- Sell and install accessories, such as batteries, windshield wiper blades, fan belts, bulbs, or headlamps.
- Collect cash payments from customers, and make change or charge purchases to customers' credit cards, providing customers with receipts.
- Check tire pressure and levels of fuel, motor oil, transmission, radiator, battery, or other fluids, adding air or fluids as required.
- Perform minor repairs, such as adjusting brakes, replacing spark plugs, or changing engine oil or filters.
- Clean parking areas, offices, restrooms, or equipment, and remove trash.
- Order stock, and price and shelve incoming goods.
- Grease and lubricate vehicles or specified units, such as springs, universal joints, or steering knuckles, using grease guns or spray lubricants.
- Rotate, test, and repair or replace tires.
- Prepare daily reports of fuel, oil, and accessory sales.
- Clean windshields.
- Activate fuel pumps and fill fuel tanks of vehicles with gasoline or diesel fuel to specified levels.
- Test and charge batteries.
- Maintain customer records and follow up periodically with telephone, mail, or personal reminders of services due.
- Provide customers with information about local roads or highways.
- Operate car washes.
- Sell and install accessories, such as batteries, windshield wiper blades, fan belts, bulbs, or headlamps.
- Install engine controls, propeller shafts, or propellers.
- Start engines to propel ships, and regulate engines and power transmissions to control speeds of ships, according to directions from captains or bridge computers.
- Maintain or repair engines, electric motors, pumps, winches, or other mechanical or electrical equipment, or assist other crew members with maintenance or repair duties.
- Perform or participate in emergency drills, as required.
- Monitor engine, machinery, or equipment indicators when vessels are underway, and report abnormalities to appropriate shipboard staff.
- Maintain complete records of engineering department activities, including machine operations.
- Perform general marine vessel maintenance or repair work, such as repairing leaks, finishing interiors, refueling, or maintaining decks.
- Maintain electrical power, heating, ventilation, refrigeration, water, or sewerage systems.
- Monitor and test operations of engines or other equipment so that malfunctions and their causes can be identified.
- Monitor the availability, use, or condition of lifesaving equipment or pollution preventatives to ensure that international regulations are followed.
- Record orders for changes in ship speed or direction, and note gauge readings or test data, such as revolutions per minute or voltage output, in engineering logs or bellbooks.
- Clean engine parts and keep engine rooms clean.
- Operate or maintain off-loading liquid pumps or valves.
- Supervise marine engine technicians engaged in the maintenance or repair of mechanical or electrical marine vessels, and inspect their work to ensure that it is performed properly.
- Order and receive engine room stores, such as oil or spare parts, maintain inventories, and record usage of supplies.
- Fabricate engine replacement parts, such as valves, stay rods, or bolts, using metalworking machinery.
- Act as a liaison between a ship's captain and shore personnel to ensure that schedules and budgets are maintained and that the ship is operated safely and efficiently.
- Install engine controls, propeller shafts, or propellers.
- Raise levers to couple and uncouple cars for makeup and breakup of trains.
- Observe train signals along routes and verify their meanings for engineers.
- Signal locomotive engineers to start or stop trains when coupling or uncoupling cars, using hand signals, lanterns, or radio communication.
- Pull or push track switches to reroute cars.
- Observe signals from other crew members so that work activities can be coordinated.
- Monitor trains as they go around curves to detect dragging equipment and smoking journal boxes.
- Inspect couplings, air hoses, journal boxes, and handbrakes to ensure that they are securely fastened and functioning properly.
- Observe tracks from left sides of locomotives to detect obstructions on tracks.
- Operate locomotives in emergency situations.
- Climb ladders to tops of cars to set brakes.
- Receive oral or written instructions from yardmasters or yard conductors indicating track assignments and cars to be switched.
- Inspect locomotives to detect damaged or worn parts.
- Signal other workers to set brakes and to throw track switches when switching cars from trains to way stations.
- Check to see that trains are equipped with supplies such as fuel, water, and sand.
- Monitor oil, temperature, and pressure gauges on dashboards to determine if engines are operating safely and efficiently.
- Set flares, flags, lanterns, or torpedoes in front and at rear of trains during emergency stops to warn oncoming trains.
- Inspect tracks, cars, and engines for defects and to determine service needs, sending engines and cars for repairs as necessary.
- Start diesel engines to warm engines before runs.
- Make minor repairs to couplings, air hoses, and journal boxes, using hand tools.
- Connect air hoses to cars, using wrenches.
- Operate and drive locomotives, diesel switch engines, dinkey engines, flatcars, and railcars in train yards and at industrial sites.
- Refuel and lubricate engines.
- Ride atop cars that have been shunted, and turn handwheels to control speeds or stop cars at specified positions.
- Adjust controls to regulate air-conditioning, heating, and lighting on trains for comfort of passengers.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Provide passengers with assistance entering and exiting trains.
- Answer questions from passengers concerning train rules, stations, and timetable information.
- Conduct brake tests to determine the condition of brakes on trains.
- Raise levers to couple and uncouple cars for makeup and breakup of trains.