- Operate boom trucks, loaders, stump chippers, brush chippers, tractors, power saws, trucks, sprayers, and other equipment and tools.
Occupations with related tasks Save Table: XLSX CSV
- Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.
- Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chainsaws, electric clippers, sod cutters, or pruning saws.
- Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
- Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
- Mow or edge lawns, using power mowers or edgers.
- Gather and remove litter.
- Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans.
- Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, walks, or walls.
- Follow planned landscaping designs to determine where to lay sod, sow grass, or plant flowers or foliage.
- Trim or pick flowers and clean flower beds.
- Attach wires from planted trees to support stakes.
- Plant seeds, bulbs, foliage, flowering plants, grass, ground covers, trees, or shrubs, and apply mulch for protection, using gardening tools.
- Rake, mulch, and compost leaves.
- Decorate gardens with stones or plants.
- Use irrigation methods to adjust the amount of water consumption and to prevent waste.
- Shovel snow from walks, driveways, or parking lots, and spread salt in those areas.
- Maintain irrigation systems, including winterizing the systems and starting them up in spring.
- Plan or cultivate lawns or gardens.
- Maintain or repair tools, equipment, or structures, such as buildings, greenhouses, fences, or benches, using hand or power tools.
- Care for artificial turf fields, periodically removing the turf and replacing cushioning pads or vacuuming and disinfecting the turf after use to prevent the growth of harmful bacteria.
- Install rock gardens, ponds, decks, drainage systems, irrigation systems, retaining walls, fences, planters, or playground equipment.
- Care for natural turf fields, making sure the underlying soil has the required composition to allow proper drainage and to support the grasses.
- Advise customers on plant selection or care.
- Haul or spread topsoil, or spread straw over seeded soil to hold soil in place.
- Mark design boundaries, and paint natural or artificial turf fields with team logos or names before events.
- Build forms and mix and pour cement to form garden borders.
- Provide proper upkeep of sidewalks, driveways, parking lots, fountains, planters, burial sites, or other grounds features.
- Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.
- Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chainsaws, electric clippers, sod cutters, or pruning saws.
- Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
- Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
- Mow or edge lawns, using power mowers or edgers.
- Start motors and engage machinery, such as sprayer agitators or pumps or portable spray equipment.
- Connect hoses and nozzles selected according to terrain, distribution pattern requirements, types of infestations, and velocities.
- Plant grass with seed spreaders, and operate straw blowers to cover seeded areas with mixtures of asphalt and straw.
- Mix pesticides, herbicides, or fungicides for application to trees, shrubs, lawns, or botanical crops.
- Fill sprayer tanks with water and chemicals, according to formulas.
- Lift, push, and swing nozzles, hoses, and tubes to direct spray over designated areas.
- Identify lawn or plant diseases to determine the appropriate course of treatment.
- Cover areas to specified depths with pesticides, applying knowledge of weather conditions, droplet sizes, elevation-to-distance ratios, and obstructions.
- Clean or service machinery to ensure operating efficiency, using water, gasoline, lubricants, or hand tools.
- Provide driving instructions to truck drivers to ensure complete coverage of designated areas, using hand and horn signals.
- Start motors and engage machinery, such as sprayer agitators or pumps or portable spray equipment.
- Connect hoses and nozzles selected according to terrain, distribution pattern requirements, types of infestations, and velocities.
- Plant grass with seed spreaders, and operate straw blowers to cover seeded areas with mixtures of asphalt and straw.
- Remove snow from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow-melting chemicals.
- Drive vans, industrial trucks, or other vehicles required to travel to, or to perform, cleaning work.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Service, clean, or supply restrooms.
- Gather and empty trash.
- Clean building floors by sweeping, mopping, scrubbing, or vacuuming.
- Monitor building security and safety by performing tasks such as locking doors after operating hours or checking electrical appliance use to ensure that hazards are not created.
- Notify managers concerning the need for major repairs or additions to building operating systems.
- Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
- Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.
- Clean windows, glass partitions, or mirrors, using soapy water or other cleaners, sponges, or squeegees.
- Requisition supplies or equipment needed for cleaning and maintenance duties.
- Dust furniture, walls, machines, or equipment.
- Clean and polish furniture and fixtures.
- Move heavy furniture, equipment, or supplies, either manually or with hand trucks.
- Strip, seal, finish, and polish floors.
- Make adjustments or minor repairs to heating, cooling, ventilating, plumbing, or electrical systems.
- Spray insecticides or fumigants to prevent insect or rodent infestation.
- Set up, arrange, or remove decorations, tables, chairs, ladders, or scaffolding to prepare facilities for events, such as banquets or meetings.
- Clean chimneys, flues, and connecting pipes, using power or hand tools.
- Steam-clean or shampoo carpets.
- Clean laboratory equipment, such as glassware or metal instruments, using solvents, brushes, rags, or power cleaning equipment.
- Clean and restore building interiors damaged by fire, smoke, or water, using commercial cleaning equipment.
- Remove snow from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow-melting chemicals.
- Drive vans, industrial trucks, or other vehicles required to travel to, or to perform, cleaning work.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Travel on foot, by vehicle, or by equipment such as boats, snowmobiles, helicopters, snowshoes, or skis to reach hunting areas.
- Steer vessels and operate navigational instruments.
- Compute positions and plot courses on charts to navigate vessels, using instruments such as compasses, sextants, and charts.
- Interpret weather and vessel conditions to determine appropriate responses.
- Patrol trap lines or nets to inspect settings, remove catch, and reset or relocate traps.
- Obtain permission from landowners to hunt or trap on their land.
- Skin quarry, using knives, and stretch pelts on frames to be cured.
- Maintain and repair trapping equipment.
- Scrape fat, blubber, or flesh from skin sides of pelts with knives or hand scrapers.
- Put fishing equipment into the water and anchor or tow equipment, according to the fishing method used.
- Maintain engines, fishing gear, and other on-board equipment and perform minor repairs.
- Sort, pack, and store catch in holds with salt and ice.
- Remove catches from fishing equipment and measure them to ensure compliance with legal size.
- Locate fish, using fish-finding equipment.
- Obtain required approvals for using poisons or traps, and notify persons in areas where traps and poison are set.
- Track animals by checking for signs such as droppings or destruction of vegetation.
- Select, bait, and set traps, and lay poison along trails, according to species, size, habits, and environs of birds or animals and reasons for trapping them.
- Attach nets, slings, hooks, blades, or lifting devices to cables, booms, hoists, or dredges.
- Participate in animal damage control, wildlife management, disease control, and research activities.
- Transport fish to processing plants or to buyers.
- Release quarry from traps or nets and transfer to cages.
- Kill or stun trapped quarry, using clubs, poisons, guns, or drowning methods.
- Wash and sort pelts according to species, color, and quality.
- Wash decks, conveyors, knives, and other equipment, using brushes, detergents, and water.
- Connect accessories such as floats, weights, flags, lights, or markers to nets, lines, or traps.
- Teach or guide individuals or groups unfamiliar with specific hunting methods or types of prey.
- Load and unload vessel equipment and supplies, by hand or using hoisting equipment.
- Harvest marine life for human or animal consumption, using diving or dredging equipment, traps, barges, rods, reels, or tackle.
- Direct fishing or hunting operations, and supervise crew members.
- Oversee the purchase of supplies, gear, and equipment.
- Travel on foot, by vehicle, or by equipment such as boats, snowmobiles, helicopters, snowshoes, or skis to reach hunting areas.
- Steer vessels and operate navigational instruments.
- Compute positions and plot courses on charts to navigate vessels, using instruments such as compasses, sextants, and charts.
- Interpret weather and vessel conditions to determine appropriate responses.
- Transport machines to installation sites.
- Make service calls to maintain and repair machines.
- Fill machines with products, ingredients, money, and other supplies.
- Inspect machines and meters to determine causes of malfunctions and fix minor problems such as jammed bills or stuck products.
- Test machines to determine proper functioning.
- Replace malfunctioning parts, such as worn magnetic heads on automatic teller machine (ATM) card readers.
- Maintain records of machine maintenance and repair.
- Clean and oil machine parts.
- Order parts needed for machine repairs.
- Adjust and repair coin, vending, or amusement machines and meters and replace defective mechanical and electrical parts, using hand tools, soldering irons, and diagrams.
- Record transaction information on forms or logs, and notify designated personnel of discrepancies.
- Keep records of merchandise distributed and money collected.
- Collect coins and bills from machines, prepare invoices, and settle accounts with concessionaires.
- Adjust machine pressure gauges and thermostats.
- Prepare repair cost estimates.
- Disassemble and assemble machines, according to specifications and using hand and power tools.
- Contact other repair personnel or make arrangements for the removal of machines in cases where major repairs are required.
- Refer to manuals and wiring diagrams to gather information needed to repair machines.
- Install machines, making the necessary water and electrical connections in compliance with codes.
- Transport machines to installation sites.
- Make service calls to maintain and repair machines.
- Drive vehicles equipped with tools and materials to job sites.
- Travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation.
- Adhere to safety practices and procedures, such as checking equipment regularly and erecting barriers around work areas.
- Open switches or attach grounding devices to remove electrical hazards from disturbed or fallen lines or to facilitate repairs.
- Climb poles or use truck-mounted buckets to access equipment.
- Install, maintain, and repair electrical distribution and transmission systems, including conduits, cables, wires, and related equipment, such as transformers, circuit breakers, and switches.
- Inspect and test power lines and auxiliary equipment to locate and identify problems, using reading and testing instruments.
- Coordinate work assignment preparation and completion with other workers.
- Replace or straighten damaged poles.
- String wire conductors and cables between poles, towers, trenches, pylons, and buildings, setting lines in place and using winches to adjust tension.
- Attach cross-arms, insulators, and auxiliary equipment to poles prior to installing them.
- Dig holes, using augers, and set poles, using cranes and power equipment.
- Identify defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments.
- Install watt-hour meters and connect service drops between power lines and consumers' facilities.
- Test conductors, according to electrical diagrams and specifications, to identify corresponding conductors and to prevent incorrect connections.
- Place insulating or fireproofing materials over conductors and joints.
- Splice or solder cables together or to overhead transmission lines, customer service lines, or street light lines, using hand tools, epoxies, or specialized equipment.
- Trim trees that could be hazardous to the functioning of cables or wires.
- Pull up cable by hand from large reels mounted on trucks.
- Lay underground cable directly in trenches, or string it through conduit running through the trenches.
- Cut trenches for laying underground cables, using trenchers and cable plows.
- Cut and peel lead sheathing and insulation from defective or newly installed cables and conduits prior to splicing.
- Clean, tin, and splice corresponding conductors by twisting ends together or by joining ends with metal clamps and soldering connections.
- Drive vehicles equipped with tools and materials to job sites.
- Travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation.
- Drive motor vehicles to job sites.
- Inspect and test operation, mechanical parts, and circuitry of gate crossings, signals, and signal equipment such as interlocks and hotbox detectors.
- Inspect electrical units of railroad grade crossing gates and repair loose bolts and defective electrical connections and parts.
- Test and repair track circuits.
- Install, inspect, maintain, and repair various railroad service equipment on the road or in the shop, including railroad signal systems.
- Tighten loose bolts, using wrenches, and test circuits and connections by opening and closing gates.
- Inspect switch-controlling mechanisms on trolley wires and in track beds, using hand tools and test equipment.
- Replace defective wiring, broken lenses, or burned-out light bulbs.
- Inspect, maintain, and replace batteries as needed.
- Record and report information about mileage or track inspected, repairs performed, and equipment requiring replacement.
- Lubricate moving parts on gate-crossing mechanisms and swinging signals.
- Clean lenses of lamps with cloths and solvents.
- Test air lines and air cylinders on pneumatically operated gates.
- Maintain high tension lines, de-energizing lines for power companies when repairs are requested.
- Drive motor vehicles to job sites.
- Drive truck equipped with power spraying equipment.
- Record work activities performed.
- Inspect premises to identify infestation source and extent of damage to property, wall, or roof porosity and access to infested locations.
- Recommend treatment and prevention methods for pest problems to clients.
- Spray or dust chemical solutions, powders, or gases into rooms, onto clothing, furnishings, or wood, or over marshlands, ditches, or catch basins.
- Clean work site after completion of job.
- Measure area dimensions requiring treatment, calculate fumigant requirements, and estimate cost for service.
- Study preliminary reports or diagrams of infested area and determine treatment type required to eliminate and prevent recurrence of infestation.
- Direct, or assist other workers in, treatment or extermination processes to eliminate or control rodents, insects, or weeds.
- Post warning signs and lock building doors to secure area to be fumigated.
- Set mechanical traps, or place poisonous paste or bait in sewers, burrows, or ditches.
- Cut or bore openings in building or surrounding concrete, access infested areas, insert nozzle, and inject pesticide to impregnate ground.
- Clean and remove blockages from infested areas to facilitate spraying procedures and provide drainage, using brooms, mops, shovels, or rakes.
- Position and fasten edges of tarpaulins over building, and tape vents to ensure air-tight environment and to check for leaks.
- Dig up and burn weeds, or spray them with herbicides.
- Drive truck equipped with power spraying equipment.
- Operate machines to clean, smooth, and prepare the ice surfaces of rinks for activities, such as skating, hockey, or curling.
- Sell tickets and collect fees from customers.
- Provide information about facilities, entertainment options, and rules and regulations.
- Keep informed of shut-down and emergency evacuation procedures.
- Direct patrons to rides, seats, or attractions.
- Monitor activities to ensure adherence to rules and safety procedures, or arrange for the removal of unruly patrons.
- Record details of attendance, sales, receipts, reservations, or repair activities.
- Maintain inventories of equipment, storing and retrieving items and assembling and disassembling equipment as necessary.
- Tend amusement booths in parks, carnivals, or stadiums, performing duties, such as conducting games, photographing patrons, or awarding prizes.
- Provide assistance to patrons entering or exiting amusement rides, boats, or ski lifts, or mounting or dismounting animals.
- Clean sporting equipment, vehicles, rides, booths, facilities, or grounds.
- Inspect equipment to detect wear and damage and perform minor repairs, adjustments, or maintenance tasks, such as oiling parts.
- Verify, collect, or punch tickets before admitting patrons to venues, such as amusement parks and rides.
- Fasten safety devices for patrons, or provide them with directions for fastening devices.
- Announce or describe amusement park attractions to patrons to entice customers to games and other entertainment.
- Schedule the use of recreation facilities, such as golf courses, tennis courts, bowling alleys, or softball diamonds.
- Sell and serve refreshments to customers.
- Rent, sell, or issue sporting equipment and supplies, such as bowling shoes, golf balls, swimming suits, or beach chairs.
- Operate, drive, or explain the use of mechanical riding devices or other automatic equipment in amusement parks, carnivals, or recreation areas.
- Operate machines to clean, smooth, and prepare the ice surfaces of rinks for activities, such as skating, hockey, or curling.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
- Raise vehicles, using hydraulic jacks.
- Remount wheels onto vehicles.
- Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.
- Place wheels on balancing machines to determine counterweights required to balance wheels.
- Identify tire size and ply and inflate tires accordingly.
- Replace valve stems and remove puncturing objects.
- Hammer required counterweights onto rims of wheels.
- Reassemble tires onto wheels.
- Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.
- Inspect tire casings for defects, such as holes or tears.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Glue tire patches over ruptures in tire casings, using rubber cement.
- Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.
- Rotate tires to different positions on vehicles, using hand tools.
- Clean and tidy up the shop.
- Buff defective areas of inner tubes, using scrapers.
- Order replacements for tires or tubes.
- Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.
- Inflate inner tubes and immerse them in water to locate leaks.
- Clean sides of whitewall tires.
- Roll new rubber treads, known as camelbacks, over tire casings and mold the semi-raw rubber treads onto the buffed casings.
- Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.
- Apply rubber cement to buffed tire casings prior to vulcanization process.
- Patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.
- Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
- Drive crew trucks to and from work areas.
- Demonstrate equipment to customers and explain its use, responding to any inquiries or complaints.
- Test circuits and components of malfunctioning telecommunications equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
- Test repaired, newly installed, or updated equipment to ensure that it functions properly and conforms to specifications, using test equipment and observation.
- Climb poles and ladders, use truck-mounted booms, and enter areas such as manholes and cable vaults to install, maintain, or inspect equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Run wires between components and to outside cable systems, connecting them to wires from telephone poles or underground cable accesses.
- Test connections to ensure that power supplies are adequate and that communications links function.
- Note differences in wire and cable colors so that work can be performed correctly.
- Inspect equipment on a regular basis to ensure proper functioning.
- Collaborate with other workers to locate and correct malfunctions.
- Remove loose wires and other debris after work is completed.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Maintain computer and manual records pertaining to facilities and equipment.
- Communicate with bases, using telephones or two-way radios to receive instructions or technical advice, or to report equipment status.
- Remove and remake connections to change circuit layouts, following work orders or diagrams.
- Clean and maintain tools, test equipment, and motor vehicles.
- Perform database verifications, using computers.
- Request support from technical service centers when on-site procedures fail to solve installation or maintenance problems.
- Analyze test readings, computer printouts, and trouble reports to determine equipment repair needs and required repair methods.
- Adjust or modify equipment to enhance equipment performance or to respond to customer requests.
- Remove and replace plug-in circuit equipment.
- Refer to manufacturers' manuals to obtain maintenance instructions pertaining to specific malfunctions.
- Dig holes or trenches as necessary for equipment installation and access.
- Review manufacturer's instructions, manuals, technical specifications, building permits, and ordinances to determine communication equipment requirements and procedures.
- Route and connect cables and lines to switches, switchboard equipment, and distributing frames, using wire-wrap guns or soldering irons to connect wires to terminals.
- Designate cables available for use.
- Diagnose and correct problems from remote locations, using special switchboards to find the sources of problems.
- Program computerized switches and switchboards to provide requested features.
- Enter codes needed to correct electronic switching system programming.
- Examine telephone transmission facilities to determine requirements for new or additional telephone services.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Install updated software and programs that maintain existing software or provide requested features, such as time-correlated call routing.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Determine viability of sites through observation, and discuss site locations and construction requirements with customers.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Provide input into the design and manufacturing of new equipment.
- Address special issues or situations, such as illegal or unauthorized use of equipment, or cases of electrical or acoustic shock.
- Place intercept circuits on terminals to handle vacant lines in central office installations.
- Drive crew trucks to and from work areas.
