- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
Occupations with related tasks Save Table: XLSX CSV
- Start motors and monitor performance for signs of malfunctioning, such as smoke, excessive vibration, or misfiring.
- Idle motors and observe thermometers to determine the effectiveness of cooling systems.
- Document inspection and test results and work performed or to be performed.
- Mount motors to boats, and operate boats at various speeds on waterways to conduct operational tests.
- Repair engine mechanical equipment, such as power tilts, bilge pumps, or power take-offs.
- Perform routine engine maintenance on motorboats, such as changing oil and filters.
- Replace parts, such as gears, magneto points, piston rings, or spark plugs, and reassemble engines.
- Inspect and repair or adjust propellers or propeller shafts.
- Adjust carburetor mixtures, electrical point settings, or timing while motors are running in water-filled test tanks.
- Set starter locks and align and repair steering or throttle controls, using gauges, screwdrivers, or wrenches.
- Disassemble and inspect motors to locate defective parts, using mechanic's hand tools and gauges.
- Adjust generators and replace faulty wiring, using hand tools and soldering irons.
- Repair or rework parts, using machine tools such as lathes, mills, drills, or grinders.
- Start motors and monitor performance for signs of malfunctioning, such as smoke, excessive vibration, or misfiring.
- Idle motors and observe thermometers to determine the effectiveness of cooling systems.
- Observe and examine appliances during operation to detect specific malfunctions such as loose parts or leaking fluid.
- Observe and test operation of appliances following installation, and make any initial installation adjustments that are necessary.
- Bill customers for repair work, and collect payment.
- Talk to customers or refer to work orders to establish the nature of appliance malfunctions.
- Refer to schematic drawings, product manuals, and troubleshooting guides to diagnose and repair problems.
- Trace electrical circuits, following diagrams, and conduct tests with circuit testers and other equipment to locate shorts and grounds.
- Replace worn and defective parts such as switches, bearings, transmissions, belts, gears, circuit boards, or defective wiring.
- Provide repair cost estimates, and recommend whether appliance repair or replacement is a better choice.
- Disassemble appliances so that problems can be diagnosed and repairs can be made.
- Respond to emergency calls for problems such as gas leaks.
- Service and repair domestic electrical or gas appliances, such as clothes washers, refrigerators, stoves, and dryers.
- Reassemble units after repairs are made, making adjustments and cleaning and lubricating parts as needed.
- Record maintenance and repair work performed on appliances.
- Test and examine gas pipelines and equipment to locate leaks and faulty connections, and to determine the pressure and flow of gas.
- Light and adjust pilot lights on gas stoves, and examine valves and burners for gas leakage and specified flame.
- Instruct customers regarding operation and care of appliances, and provide information such as emergency service numbers.
- Contact supervisors or offices to receive repair assignments.
- Maintain stocks of parts used in on-site installation, maintenance, and repair of appliances.
- Level refrigerators, adjust doors, and connect water lines to water pipes for ice makers and water dispensers, using hand tools.
- Set appliance thermostats, and check to ensure that they are functioning properly.
- Install appliances such as refrigerators, washing machines, and stoves.
- Level washing machines and connect hoses to water pipes, using hand tools.
- Clean and reinstall parts.
- Clean, lubricate, and touch up minor defects on newly installed or repaired appliances.
- Conserve, recover, and recycle refrigerants used in cooling systems.
- Install gas pipes and water lines to connect appliances to existing gas lines or plumbing.
- Take measurements to determine if appliances will fit in installation locations, performing minor carpentry work when necessary to ensure proper installation.
- Measure, cut, and thread pipe, and connect it to feeder lines and equipment or appliances, using rules and hand tools.
- Assemble new or reconditioned appliances.
- Disassemble and reinstall existing kitchen cabinets, or assemble and install prefabricated kitchen cabinets and trim in conjunction with appliance installation.
- Hang steel supports from beams or joists to hold hoses, vents, and gas pipes in place.
- Observe and examine appliances during operation to detect specific malfunctions such as loose parts or leaking fluid.
- Observe and test operation of appliances following installation, and make any initial installation adjustments that are necessary.
- Monitor trains as they go around curves to detect dragging equipment and smoking journal boxes.
- Monitor oil, temperature, and pressure gauges on dashboards to determine if engines are operating safely and efficiently.
- Observe train signals along routes and verify their meanings for engineers.
- Signal locomotive engineers to start or stop trains when coupling or uncoupling cars, using hand signals, lanterns, or radio communication.
- Pull or push track switches to reroute cars.
- Observe signals from other crew members so that work activities can be coordinated.
- Inspect couplings, air hoses, journal boxes, and handbrakes to ensure that they are securely fastened and functioning properly.
- Observe tracks from left sides of locomotives to detect obstructions on tracks.
- Operate locomotives in emergency situations.
- Raise levers to couple and uncouple cars for makeup and breakup of trains.
- Climb ladders to tops of cars to set brakes.
- Receive oral or written instructions from yardmasters or yard conductors indicating track assignments and cars to be switched.
- Inspect locomotives to detect damaged or worn parts.
- Signal other workers to set brakes and to throw track switches when switching cars from trains to way stations.
- Check to see that trains are equipped with supplies such as fuel, water, and sand.
- Set flares, flags, lanterns, or torpedoes in front and at rear of trains during emergency stops to warn oncoming trains.
- Inspect tracks, cars, and engines for defects and to determine service needs, sending engines and cars for repairs as necessary.
- Start diesel engines to warm engines before runs.
- Make minor repairs to couplings, air hoses, and journal boxes, using hand tools.
- Connect air hoses to cars, using wrenches.
- Operate and drive locomotives, diesel switch engines, dinkey engines, flatcars, and railcars in train yards and at industrial sites.
- Refuel and lubricate engines.
- Ride atop cars that have been shunted, and turn handwheels to control speeds or stop cars at specified positions.
- Adjust controls to regulate air-conditioning, heating, and lighting on trains for comfort of passengers.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Provide passengers with assistance entering and exiting trains.
- Answer questions from passengers concerning train rules, stations, and timetable information.
- Conduct brake tests to determine the condition of brakes on trains.
- Monitor trains as they go around curves to detect dragging equipment and smoking journal boxes.
- Monitor oil, temperature, and pressure gauges on dashboards to determine if engines are operating safely and efficiently.
- Listen to engines, examine vehicle frames, or confer with customers to determine nature and extent of malfunction or damage.
- Mount, balance, change, or check condition or pressure of tires.
- Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.
- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, or generators.
- Connect test panels to engines and measure generator output, ignition timing, or other engine performance indicators.
- Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline or oil tanks, starters, or mufflers.
- Disassemble subassembly units and examine condition, movement, or alignment of parts, visually or using gauges.
- Repair or adjust motorcycle subassemblies, such as forks, transmissions, brakes, or drive chains, according to specifications.
- Reassemble frames and reinstall engines after repairs.
- Remove cylinder heads and grind valves to scrape off carbon and replace defective valves, pistons, cylinders, or rings, using hand and power tools.
- Install motorcycle accessories.
- Reassemble and test subassembly units.
- Hammer out dents and bends in frames and weld tears and breaks.
- Listen to engines, examine vehicle frames, or confer with customers to determine nature and extent of malfunction or damage.
- Tend and observe equipment and machinery to verify efficient and safe operation.
- Install or replace machinery, equipment, and new or replacement parts and instruments, using hand or power tools.
- Examine and test machinery, equipment, components, and parts for defects to ensure proper functioning.
- Adjust, connect, or disconnect wiring, piping, tubing, and other parts, using hand or power tools.
- Clean or lubricate vehicles, machinery, equipment, instruments, tools, work areas, and other objects, using hand tools, power tools, and cleaning equipment.
- Diagnose electrical problems and install and rewire electrical components.
- Disassemble broken or defective equipment to facilitate repair and reassemble equipment when repairs are complete.
- Position vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment.
- Transfer tools, parts, equipment, and supplies to and from work stations and other areas.
- Adjust, maintain, and repair tools, equipment, and machines, and assist more skilled workers with similar tasks.
- Order new parts to maintain inventory.
- Apply protective materials to equipment, components, and parts to prevent defects and corrosion.
- Design, weld, and fabricate parts, using blueprints or other mechanical plans.
- Assemble and maintain physical structures, using hand or power tools.
- Prepare work stations for use by mechanics and repairers.
- Hold or supply tools, parts, equipment, and supplies for other workers.
- Tend and observe equipment and machinery to verify efficient and safe operation.
- Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.
- Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Repair or replace broken or malfunctioning components of machinery or equipment.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Disassemble machinery or equipment to remove parts and make repairs.
- Reassemble equipment after completion of inspections, testing, or repairs.
- Examine parts for defects, such as breakage or excessive wear.
- Record repairs and maintenance performed.
- Operate newly repaired machinery or equipment to verify the adequacy of repairs.
- Record parts or materials used and order or requisition new parts or materials, as necessary.
- Analyze test results, machine error messages, or information obtained from operators to diagnose equipment problems.
- Study blueprints or manufacturers' manuals to determine correct installation or operation of machinery.
- Cut and weld metal to repair broken metal parts, fabricate new parts, or assemble new equipment.
- Enter codes and instructions to program computer-controlled machinery.
- Demonstrate equipment functions and features to machine operators.
- Assign schedules to work crews.
- Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.
- Start machines and observe mechanical operation to determine efficiency and to detect problems.
- Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
- Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
- Reassemble machines after the completion of repair or maintenance work.
- Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
- Install, replace, or change machine parts and attachments, according to production specifications.
- Collaborate with other workers to repair or move machines, machine parts, or equipment.
- Inventory and requisition machine parts, equipment, and other supplies so that stock can be maintained and replenished.
- Record production, repair, and machine maintenance information.
- Set up and operate machines, and adjust controls to regulate operations.
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
- Collect and discard worn machine parts and other refuse to maintain machinery and work areas.
- Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.
- Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.
- Replace, empty, or replenish machine and equipment containers such as gas tanks or boxes.
- Replace or repair metal, wood, leather, glass, or other lining in machines, or in equipment compartments or containers.
- Remove hardened material from machines or machine parts, using abrasives, power and hand tools, jackhammers, sledgehammers, or other equipment.
- Measure, mix, prepare, and test chemical solutions used to clean or repair machinery and equipment.
- Start machines and observe mechanical operation to determine efficiency and to detect problems.
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, or pressure gauges.
- Use handtools, such as screwdrivers, pliers, wrenches, pressure gauges, or precision instruments, as well as power tools, such as pneumatic wrenches, lathes, welding equipment, or jacks and hoists.
- Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition.
- Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists.
- Adjust and reline brakes, align wheels, tighten bolts and screws, and reassemble equipment.
- Attach test instruments to equipment, and read dials and gauges to diagnose malfunctions.
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery.
- Examine and adjust protective guards, loose bolts, and specified safety devices.
- Rewire ignition systems, lights, and instrument panels.
- Test drive trucks and buses to diagnose malfunctions or to ensure that they are working properly.
- Diagnose and repair vehicle heating and cooling systems.
- Inspect, repair, and maintain automotive and mechanical equipment and machinery, such as pumps and compressors.
- Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications.
- Disassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential units.
- Adjust or repair computer controlled exhaust emissions devices.
- Rebuild gas or diesel engines.
- Specialize in repairing and maintaining parts of the engine, such as fuel injection systems.
- Recondition and replace parts, pistons, bearings, gears, and valves.
- Install or repair accessories.
- Repair or adjust seats, doors, or windows.
- Dismount, mount, and repair or replace tires.
- Align front ends and suspension systems.
- Maintain or repair vehicles with alternative fuel systems, including biodiesel, hybrid, or compressed natural gas vehicles.
- Measure vehicle emissions to determine whether they are within acceptable limits.
- Follow green operational practices involving conservation of water or energy or reduction of solid waste.
- Operate valve-grinding machines to grind and reset valves.
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, or pressure gauges.
