- Thin or space trees, using power thinning saws.
Occupations with related tasks Save Table: XLSX CSV
- Stop saw engines, pull cutting bars from cuts, and run to safety as tree falls.
- Clear brush from work areas and escape routes, and cut saplings and other trees from direction of falls, using axes, chainsaws, or bulldozers.
- Trim off the tops and limbs of trees, using chainsaws, delimbers, or axes.
- Insert jacks or drive wedges behind saws to prevent binding of saws and to start trees falling.
- Work as a member of a team, rotating between chain saw operation and skidder operation.
- Split logs, using axes, wedges, and mauls, and stack wood in ricks or cord lots.
- Saw back-cuts, leaving sufficient sound wood to control direction of fall.
- Measure felled trees and cut them into specified log lengths, using chain saws and axes.
- Control the direction of a tree's fall by scoring cutting lines with axes, sawing undercuts along scored lines with chainsaws, knocking slabs from cuts with single-bit axes, and driving wedges.
- Appraise trees for certain characteristics, such as twist, rot, and heavy limb growth, and gauge amount and direction of lean, to determine how to control the direction of a tree's fall with the least damage.
- Assess logs after cutting to ensure that the quality and length are correct.
- Determine position, direction, and depth of cuts to be made, and placement of wedges or jacks.
- Select trees to be cut down, assessing factors such as site, terrain, and weather conditions before beginning work.
- Maintain and repair chainsaws and other equipment, cleaning, oiling, and greasing equipment, and sharpening equipment properly.
- Tag unsafe trees with high-visibility ribbons.
- Secure steel cables or chains to logs for dragging by tractors or for pulling by cable yarding systems.
- Load logs or wood onto trucks, trailers, or railroad cars, by hand or using loaders or winches.
- Mark logs for identification.
- Place supporting limbs or poles under felled trees to avoid splitting undersides, and to prevent logs from rolling.
- Stop saw engines, pull cutting bars from cuts, and run to safety as tree falls.
- Clear brush from work areas and escape routes, and cut saplings and other trees from direction of falls, using axes, chainsaws, or bulldozers.
- Trim off the tops and limbs of trees, using chainsaws, delimbers, or axes.
- Insert jacks or drive wedges behind saws to prevent binding of saws and to start trees falling.
- Work as a member of a team, rotating between chain saw operation and skidder operation.
- Split logs, using axes, wedges, and mauls, and stack wood in ricks or cord lots.
- Saw back-cuts, leaving sufficient sound wood to control direction of fall.
- Measure felled trees and cut them into specified log lengths, using chain saws and axes.
- Control the direction of a tree's fall by scoring cutting lines with axes, sawing undercuts along scored lines with chainsaws, knocking slabs from cuts with single-bit axes, and driving wedges.
- Cut away dead and excess branches from trees, or clear branches around power lines, using climbing equipment or buckets of extended truck booms, or chainsaws, hooks, handsaws, shears, and clippers.
- Trim, top, and reshape trees to achieve attractive shapes or to remove low-hanging branches.
- Trim jagged stumps, using saws or pruning shears.
- Prune, cut down, fertilize, and spray trees as directed by tree surgeons.
- Harvest tanbark by cutting rings and slits in bark and stripping bark from trees, using spuds or axes.
- Operate shredding and chipping equipment, and feed limbs and brush into the machines.
- Operate boom trucks, loaders, stump chippers, brush chippers, tractors, power saws, trucks, sprayers, and other equipment and tools.
- Hoist tools and equipment to tree trimmers, and lower branches with ropes or block and tackle.
- Spray trees to treat diseased or unhealthy trees, including mixing chemicals and calibrating spray equipment.
- Split logs or wooden blocks into bolts, pickets, posts, or stakes, using hand tools such as ax wedges, sledgehammers, and mallets.
- Clean, sharpen, and lubricate tools and equipment.
- Climb trees, using climbing hooks and belts, or climb ladders to gain access to work areas.
- Supervise others engaged in tree trimming work and train lower-level employees.
- Load debris and refuse onto trucks and haul it away for disposal.
- Inspect trees to determine if they have diseases or pest problems.
- Provide information to the public regarding trees, such as advice on tree care.
- Clear sites, streets, and grounds of woody and herbaceous materials, such as tree stumps and fallen trees and limbs.
- Collect debris and refuse from tree trimming and removal operations into piles, using shovels, rakes, or other tools.
- Cable, brace, tie, bolt, stake, and guy trees and branches to provide support.
- Plan and develop budgets for tree work, and estimate the monetary value of trees.
- Remove broken limbs from wires, using hooked extension poles.
- Water, root-feed, and fertilize trees.
- Install lightning protection on trees.
- Scrape decayed matter from cavities in trees and fill holes with cement to promote healing and to prevent further deterioration.
- Apply tar or other protective substances to cut surfaces or seal surfaces and to protect them from fungi and insects.
- Transplant and remove trees and shrubs, and prepare trees for moving.
- Cut away dead and excess branches from trees, or clear branches around power lines, using climbing equipment or buckets of extended truck booms, or chainsaws, hooks, handsaws, shears, and clippers.
- Trim, top, and reshape trees to achieve attractive shapes or to remove low-hanging branches.
- Trim jagged stumps, using saws or pruning shears.
- Prune, cut down, fertilize, and spray trees as directed by tree surgeons.
- Harvest tanbark by cutting rings and slits in bark and stripping bark from trees, using spuds or axes.
- Operate shredding and chipping equipment, and feed limbs and brush into the machines.
- Operate boom trucks, loaders, stump chippers, brush chippers, tractors, power saws, trucks, sprayers, and other equipment and tools.
- Hoist tools and equipment to tree trimmers, and lower branches with ropes or block and tackle.
- Spray trees to treat diseased or unhealthy trees, including mixing chemicals and calibrating spray equipment.
- Split logs or wooden blocks into bolts, pickets, posts, or stakes, using hand tools such as ax wedges, sledgehammers, and mallets.
- Control hydraulic tractors equipped with tree clamps and booms to lift, swing, and bunch sheared trees.
- Drive straight or articulated tractors equipped with accessories such as bulldozer blades, grapples, logging arches, cable winches, and crane booms to skid, load, unload, or stack logs, pull stumps, or clear brush.
- Drive crawler or wheeled tractors to drag or transport logs from felling sites to log landing areas for processing and loading.
- Drive tractors for building or repairing logging and skid roads.
- Drive and maneuver tractors and tree harvesters to shear the tops off of trees, cut and limb the trees, and cut the logs into desired lengths.
- Inspect equipment for safety prior to use, and perform necessary basic maintenance tasks.
- Grade logs according to characteristics such as knot size and straightness, and according to established industry or company standards.
- Fill out required job or shift report forms.
- Calculate total board feet, cordage, or other wood measurement units, using conversion tables.
- Control hydraulic tractors equipped with tree clamps and booms to lift, swing, and bunch sheared trees.
- Drive straight or articulated tractors equipped with accessories such as bulldozer blades, grapples, logging arches, cable winches, and crane booms to skid, load, unload, or stack logs, pull stumps, or clear brush.
- Drive crawler or wheeled tractors to drag or transport logs from felling sites to log landing areas for processing and loading.
- Drive tractors for building or repairing logging and skid roads.
- Drive and maneuver tractors and tree harvesters to shear the tops off of trees, cut and limb the trees, and cut the logs into desired lengths.
- Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
- Trim or pick flowers and clean flower beds.
- Mow or edge lawns, using power mowers or edgers.
- Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.
- Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chainsaws, electric clippers, sod cutters, or pruning saws.
- Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
- Gather and remove litter.
- Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans.
- Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, walks, or walls.
- Follow planned landscaping designs to determine where to lay sod, sow grass, or plant flowers or foliage.
- Attach wires from planted trees to support stakes.
- Plant seeds, bulbs, foliage, flowering plants, grass, ground covers, trees, or shrubs, and apply mulch for protection, using gardening tools.
- Rake, mulch, and compost leaves.
- Decorate gardens with stones or plants.
- Use irrigation methods to adjust the amount of water consumption and to prevent waste.
- Shovel snow from walks, driveways, or parking lots, and spread salt in those areas.
- Maintain irrigation systems, including winterizing the systems and starting them up in spring.
- Plan or cultivate lawns or gardens.
- Maintain or repair tools, equipment, or structures, such as buildings, greenhouses, fences, or benches, using hand or power tools.
- Care for artificial turf fields, periodically removing the turf and replacing cushioning pads or vacuuming and disinfecting the turf after use to prevent the growth of harmful bacteria.
- Install rock gardens, ponds, decks, drainage systems, irrigation systems, retaining walls, fences, planters, or playground equipment.
- Care for natural turf fields, making sure the underlying soil has the required composition to allow proper drainage and to support the grasses.
- Advise customers on plant selection or care.
- Haul or spread topsoil, or spread straw over seeded soil to hold soil in place.
- Mark design boundaries, and paint natural or artificial turf fields with team logos or names before events.
- Build forms and mix and pour cement to form garden borders.
- Provide proper upkeep of sidewalks, driveways, parking lots, fountains, planters, burial sites, or other grounds features.
- Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
- Trim or pick flowers and clean flower beds.
- Mow or edge lawns, using power mowers or edgers.
- Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.
- Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chainsaws, electric clippers, sod cutters, or pruning saws.
- Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
- Tend conveyor chains that move logs to and from scaling stations.
- Saw felled trees into lengths.
- Evaluate log characteristics and determine grades, using established criteria.
- Record data about individual trees or load volumes into tally books or hand-held collection terminals.
- Measure felled logs or loads of pulpwood to calculate volume, weight, dimensions, and marketable value, using measuring devices and conversion tables.
- Paint identification marks of specified colors on logs to identify grades or species, using spray cans, or call out grades to log markers.
- Jab logs with metal ends of scale sticks, and inspect logs to ascertain characteristics or defects such as water damage, splits, knots, broken ends, rotten areas, twists, and curves.
- Identify logs of substandard or special grade so that they can be returned to shippers, regraded, recut, or transferred for other processing.
- Arrange for hauling of logs to appropriate mill sites.
- Weigh log trucks before and after unloading, and record load weights and supplier identities.
- Measure log lengths and mark boles for bucking into logs, according to specifications.
- Communicate with coworkers by signals to direct log movement.
- Drive to sawmills, wharfs, or skids to inspect logs or pulpwood.
- Tend conveyor chains that move logs to and from scaling stations.
- Saw felled trees into lengths.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Service, clean, or supply restrooms.
- Gather and empty trash.
- Clean building floors by sweeping, mopping, scrubbing, or vacuuming.
- Monitor building security and safety by performing tasks such as locking doors after operating hours or checking electrical appliance use to ensure that hazards are not created.
- Notify managers concerning the need for major repairs or additions to building operating systems.
- Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
- Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.
- Clean windows, glass partitions, or mirrors, using soapy water or other cleaners, sponges, or squeegees.
- Requisition supplies or equipment needed for cleaning and maintenance duties.
- Dust furniture, walls, machines, or equipment.
- Clean and polish furniture and fixtures.
- Move heavy furniture, equipment, or supplies, either manually or with hand trucks.
- Strip, seal, finish, and polish floors.
- Remove snow from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow-melting chemicals.
- Make adjustments or minor repairs to heating, cooling, ventilating, plumbing, or electrical systems.
- Drive vans, industrial trucks, or other vehicles required to travel to, or to perform, cleaning work.
- Spray insecticides or fumigants to prevent insect or rodent infestation.
- Set up, arrange, or remove decorations, tables, chairs, ladders, or scaffolding to prepare facilities for events, such as banquets or meetings.
- Clean chimneys, flues, and connecting pipes, using power or hand tools.
- Steam-clean or shampoo carpets.
- Clean laboratory equipment, such as glassware or metal instruments, using solvents, brushes, rags, or power cleaning equipment.
- Clean and restore building interiors damaged by fire, smoke, or water, using commercial cleaning equipment.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Plant or maintain vegetation through activities such as mulching, fertilizing, watering, mowing, or pruning.
- Establish and enforce operating procedures and work standards that will ensure adequate performance and personnel safety.
- Schedule work for crews, depending on work priorities, crew or equipment availability, or weather conditions.
- Tour grounds, such as parks, botanical gardens, cemeteries, or golf courses, to inspect conditions of plants and soil.
- Monitor project activities to ensure that instructions are followed, deadlines are met, and schedules are maintained.
- Direct activities of workers who perform duties, such as landscaping, cultivating lawns, or pruning trees and shrubs.
- Inspect completed work to ensure conformance to specifications, standards, and contract requirements.
- Direct or perform mixing or application of fertilizers, insecticides, herbicides, or fungicides.
- Train workers in tasks such as transplanting or pruning trees or shrubs, finishing cement, using equipment, or caring for turf.
- Prepare service estimates based on labor, material, and machine costs and maintain budgets for individual projects.
- Identify diseases or pests affecting landscaping and order appropriate treatments.
- Inventory supplies of tools, equipment, or materials to ensure that sufficient supplies are available and items are in usable condition.
- Maintain required records, such as personnel information or project records.
- Perform personnel-related activities, such as hiring workers, evaluating staff performance, or taking disciplinary actions when performance problems occur.
- Prepare or maintain required records, such as work activity or personnel reports.
- Investigate work-related complaints to verify problems and to determine responses.
- Perform administrative duties, such as authorizing leaves or processing time sheets.
- Confer with other supervisors to coordinate work activities with those of other departments or units.
- Direct or assist workers engaged in the maintenance or repair of equipment, such as power tools or motorized equipment.
- Review contracts or work assignments to determine service, machine, or workforce requirements for jobs.
- Order the performance of corrective work when problems occur and recommend procedural changes to avoid such problems.
- Confer with managers or landscape architects to develop plans or schedules for landscaping maintenance or improvement.
- Recommend changes in working conditions or equipment used to increase crew efficiency.
- Answer inquiries from current or prospective customers regarding methods, materials, or price ranges.
- Install or maintain landscaped areas, performing tasks such as removing snow, pouring cement curbs, or repairing sidewalks.
- Design or supervise the installation of sprinkler systems, calculating water pressure, or valve and pipe coverage needs.
- Negotiate with customers regarding fees for landscaping, lawn service, or groundskeeping work.
- Provide workers with assistance in performing duties as necessary to meet deadlines.
- Plant or maintain vegetation through activities such as mulching, fertilizing, watering, mowing, or pruning.
