- Disassemble machines to examine parts, such as wires, gears, or bearings for wear or defects, using hand or power tools and measuring devices.
Occupations with related tasks Save Table: XLSX CSV
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Inspect airframes for wear or other defects.
- Measure parts for wear, using precision instruments.
- Obtain fuel and oil samples and check them for contamination.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Measure the tension of control cables.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Clean, refuel, and change oil in line service aircraft.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Cure bonded structures, using portable or stationary curing equipment.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Determine repair limits for engine hot section parts.
- Prepare and paint aircraft surfaces.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Disassemble subassembly units and examine condition, movement, or alignment of parts, visually or using gauges.
- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, or generators.
- Mount, balance, change, or check condition or pressure of tires.
- Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.
- Connect test panels to engines and measure generator output, ignition timing, or other engine performance indicators.
- Listen to engines, examine vehicle frames, or confer with customers to determine nature and extent of malfunction or damage.
- Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline or oil tanks, starters, or mufflers.
- Repair or adjust motorcycle subassemblies, such as forks, transmissions, brakes, or drive chains, according to specifications.
- Reassemble frames and reinstall engines after repairs.
- Remove cylinder heads and grind valves to scrape off carbon and replace defective valves, pistons, cylinders, or rings, using hand and power tools.
- Install motorcycle accessories.
- Reassemble and test subassembly units.
- Hammer out dents and bends in frames and weld tears and breaks.
- Disassemble subassembly units and examine condition, movement, or alignment of parts, visually or using gauges.
- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, or generators.
- Dismantle engines, using hand tools, and examine parts for defects.
- Remove engines from equipment, and position and bolt engines to repair stands.
- Record repairs made, time spent, and parts used.
- Test and inspect engines to determine malfunctions, to locate missing and broken parts, and to verify repairs, using diagnostic instruments.
- Repair and maintain gasoline engines used to power equipment such as portable saws, lawn mowers, generators, and compressors.
- Adjust points, valves, carburetors, distributors, and spark plug gaps, using feeler gauges.
- Repair or replace defective parts such as magnetos, water pumps, gears, pistons, and carburetors, using hand tools.
- Perform routine maintenance such as cleaning and oiling parts, honing cylinders, and tuning ignition systems.
- Reassemble engines after repair or maintenance work is complete.
- Replace motors.
- Obtain problem descriptions from customers, and prepare cost estimates for repairs.
- Show customers how to maintain equipment.
- Sell parts and equipment.
- Grind, ream, rebore, and re-tap parts to obtain specified clearances, using grinders, lathes, taps, reamers, boring machines, and micrometers.
- Dismantle engines, using hand tools, and examine parts for defects.
- Remove engines from equipment, and position and bolt engines to repair stands.
- Disassemble units and inspect parts for wear, using micrometers, calipers, and gauges.
- Tear down, repair, and rebuild faulty assemblies, such as power systems, steering systems, and linkages.
- Inspect vehicles for damage and record findings so that necessary repairs can be made.
- Test drive vehicles and test components and systems, using equipment such as infrared engine analyzers, compression gauges, and computerized diagnostic devices.
- Test and adjust repaired systems to meet manufacturers' performance specifications.
- Repair, reline, replace, and adjust brakes.
- Review work orders and discuss work with supervisors.
- Estimate costs of vehicle repair.
- Confer with customers to obtain descriptions of vehicle problems and to discuss work to be performed and future repair requirements.
- Align vehicles' front ends.
- Align wheels, axles, frames, torsion bars, and steering mechanisms of automobiles, using special alignment equipment and wheel-balancing machines.
- Perform routine and scheduled maintenance services, such as oil changes, lubrications, and tune-ups.
- Plan work procedures, using charts, technical manuals, and experience.
- Follow checklists to ensure all important parts are examined, including belts, hoses, steering systems, spark plugs, brake and fuel systems, wheel bearings, and other potentially troublesome areas.
- Maintain cleanliness of work area.
- Change spark plugs, fuel filters, air filters, and batteries in hybrid electric vehicles.
- Repair and service air conditioning, heating, engine cooling, and electrical systems.
- Test electronic computer components in automobiles to ensure proper operation.
- Overhaul or replace carburetors, blowers, generators, distributors, starters, and pumps.
- Repair or replace parts such as pistons, rods, gears, valves, and bearings.
- Rewire ignition systems, lights, and instrument panels.
- Troubleshoot fuel, ignition, and emissions control systems, using electronic testing equipment.
- Tune automobile engines to ensure proper and efficient functioning.
- Repair, replace, or adjust defective fuel injectors, carburetor parts, and gasoline filters.
- Install, adjust, or repair hydraulic or electromagnetic automatic lift mechanisms used to raise and lower automobile windows, seats, and tops.
- Conduct visual inspections of compressed natural gas fuel systems to identify cracks, gouges, abrasions, discoloration, broken fibers, loose brackets, damaged gaskets, or other problems.
- Rebuild parts, such as crankshafts and cylinder blocks.
- Diagnose and replace or repair engine management systems or related sensors for flexible fuel vehicles (FFVs) with ignition timing, fuel rate, alcohol concentration, or air-to-fuel ratio malfunctions.
- Repair or rebuild transmissions.
- Retrofit vehicle fuel systems with aftermarket products, such as vapor transfer devices, evaporation control devices, swirlers, lean burn devices, and friction reduction devices, to enhance combustion and fuel efficiency.
- Disassemble units and inspect parts for wear, using micrometers, calipers, and gauges.
- Tear down, repair, and rebuild faulty assemblies, such as power systems, steering systems, and linkages.
- Disassemble and reassemble equipment for inspection.
- Analyze test data to identify defects or determine calibration requirements.
- Attend conferences, workshops, or other training sessions to learn about new tools or methods.
- Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.
- Conduct calibration tests to determine performance or reliability of mechanical, structural, or electromechanical equipment.
- Develop new calibration methods or techniques based on measurement science, analyses, or calibration requirements.
- Draw plans for developing jigs, fixtures, instruments, or other devices.
- Maintain or repair measurement devices or equipment used for calibration testing.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Order replacement parts for malfunctioning equipment.
- Plan sequences of calibration tests according to equipment specifications and scientific principles.
- Read blueprints, schematics, diagrams, or technical orders.
- Verify part dimensions or clearances using precision measuring instruments to ensure conformance to specifications.
- Visually inspect equipment to detect surface defects.
- Write and submit reports about the results of calibration tests.
- Disassemble and reassemble equipment for inspection.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
- Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
- Oil moving parts of timepieces.
- Estimate repair costs and timepiece values.
- Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
- Test timepiece accuracy and performance, using meters and other electronic instruments.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Order supplies, including replacement parts, for timing instruments.
- Gather information from customers about a timepiece's problems and its service history.
- Test and replace batteries and other electronic components.
- Record quantities and types of timepieces repaired, serial and model numbers of items, work performed, and charges for repairs.
- Demagnetize mechanisms, using demagnetizing machines.
- Fabricate parts for watches and clocks, using small lathes and other machines.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
