Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar stock.
Sample of reported job titles:
Computer Numerical Control Lathe Operator (CNC Lathe Operator), Lathe Operator, Lathe Set Up Person, Machine Operator, Numerical Control Operator (NC Operator), Screw Machine Operator, Screw Machine Tool Setter, Setup Operator, Turn Operator
You will be leaving O*NET OnLine to visit our sister site My Next Move. You can return by using the Back button in your browser, or by choosing “O*NET OnLine” from the O*NET Sites menu at the bottom of any page in My Next Move.
You will be leaving O*NET OnLine to visit our sister site My Next Move for Veterans. You can return by using the Back button in your browser, or by choosing “O*NET OnLine” from the O*NET Sites menu at the bottom of any page in My Next Move for Veterans.
Saldrá de O*NET OnLine para visitar nuestro sitio afiliado Mi Próximo Paso. Puede regresar usando el botón Atrás en su navegador, o eligiendo “O*NET OnLine” en el menú Sitios O*NET en la parte inferior de cualquier página en Mi Próximo Paso.
Tasks
-
Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
-
Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
-
Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
-
Start lathe or turning machines and observe operations to ensure that specifications are met.
-
Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
-
Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
-
Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
-
Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
-
Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
-
Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.
-
Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
-
Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
-
Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
-
Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
-
Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
-
Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
back to top
Technology Skills
-
Industrial control software — Autodesk HSMWorks; Computer numerical control CNC editor software
-
Inventory management software — Inventory tracking software
-
Object or component oriented development software — G-code; M-code
back to top
Work Activities
-
Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
-
Inspecting Equipment, Structures, or Materials — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
-
Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
-
Evaluating Information to Determine Compliance with Standards — Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
-
Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
-
Monitoring Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
-
Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems.
-
Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
-
Communicating with Supervisors, Peers, or Subordinates — Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
-
Documenting/Recording Information — Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
-
Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
-
Training and Teaching Others — Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
-
Judging the Qualities of Objects, Services, or People — Assessing the value, importance, or quality of things or people.
-
Performing General Physical Activities — Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials.
-
Processing Information — Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
-
Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job.
-
Estimating the Quantifiable Characteristics of Products, Events, or Information — Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
-
Working with Computers — Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information.
-
Coaching and Developing Others — Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
-
Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment — Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
-
Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
back to top
Detailed Work Activities
-
Operate metal or plastic forming equipment.
-
Operate grinding equipment.
-
Replace worn equipment components.
-
Sharpen cutting or grinding tools.
-
Measure dimensions of completed products or workpieces to verify conformance to specifications.
-
Monitor equipment operation to ensure that products are not flawed.
-
Operate cutting equipment.
-
Mount attachments or tools onto production equipment.
-
Conduct test runs of production equipment.
-
Read work orders or other instructions to determine product specifications or materials requirements.
-
Review blueprints or other instructions to determine operational methods or sequences.
-
Select production equipment according to product specifications.
-
Set equipment controls to meet cutting specifications.
-
Install mechanical components in production equipment.
-
Perform basic equipment maintenance.
-
Calculate dimensions of workpieces, products, or equipment.
-
Feed materials or products into or through equipment.
-
Lift materials or workpieces using cranes or other lifting equipment.
-
Mount materials or workpieces onto production equipment.
-
Adjust equipment controls to regulate coolant flow.
back to top
Work Context
-
Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets — 100% responded “Every day.”
-
Spend Time Standing — 63% responded “Continually or almost continually.”
-
Importance of Being Exact or Accurate — 66% responded “Extremely important.”
-
Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls — 70% responded “Continually or almost continually.”
-
Sounds, Noise Levels Are Distracting or Uncomfortable — 65% responded “Every day.”
-
Face-to-Face Discussions — 66% responded “Every day.”
-
Exposed to Contaminants — 57% responded “Every day.”
-
Pace Determined by Speed of Equipment — 45% responded “Very important.”
-
Responsible for Others' Health and Safety — 44% responded “High responsibility.”
-
Freedom to Make Decisions — 39% responded “A lot of freedom.”
-
Time Pressure — 41% responded “Once a week or more but not every day.”
-
Structured versus Unstructured Work — 52% responded “Some freedom.”
-
Work With Work Group or Team — 34% responded “Extremely important.”
-
Importance of Repeating Same Tasks — 39% responded “Extremely important.”
-
Spend Time Making Repetitive Motions — 53% responded “Continually or almost continually.”
-
Duration of Typical Work Week — 67% responded “40 hours.”
-
Exposed to Hazardous Equipment — 52% responded “Every day.”
-
Frequency of Decision Making — 33% responded “Every day.”
-
Impact of Decisions on Co-workers or Company Results — 51% responded “Important results.”
-
Degree of Automation — 32% responded “Highly automated.”
-
Indoors, Not Environmentally Controlled — 57% responded “Every day.”
-
Responsibility for Outcomes and Results — 30% responded “Very high responsibility.”
-
Contact With Others — 31% responded “Constant contact with others.”
-
Spend Time Bending or Twisting the Body — 41% responded “Less than half the time.”
-
Spend Time Walking and Running — 34% responded “Less than half the time.”
back to top
Job Zone
- Title
- Job Zone Two: Some Preparation Needed
- Education
- These occupations usually require a high school diploma.
- Related Experience
- Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
- Job Training
- Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
- Job Zone Examples
- These occupations often involve using your knowledge and skills to help others. Examples include orderlies, counter and rental clerks, customer service representatives, security guards, upholsterers, tellers, and dental laboratory technicians.
- SVP Range
- (4.0 to < 6.0)
back to top
Training & Credentials
- State training
-
- Local training
-
- Certifications
-
back to top
Apprenticeship Opportunities
Example apprenticeship titles for this occupation:
- Cnc Operator - Milling and Turning
- Engine-Lathe Set-Up Op,Tool
- Engine-Lathe Set-Up Operator
- Plate Shop Operator
- Screw-Mach Set-Up Operator
- Screw-Mach Set-Up Operator, Single
- Screw-Machine Operator, Multi Spin
- Screw-Machine Operator, Single Spin
- Spinner, Hand
- Turret Lathe Set-Up Operat
Specific title(s) listed above are vetted by industry and approved by the U.S. Department of Labor for use in a Registered Apprenticeship Program.
back to top
Skills
-
Operations Monitoring — Watching gauges, dials, or other indicators to make sure a machine is working properly.
-
Operation and Control — Controlling operations of equipment or systems.
-
Monitoring — Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
-
Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
-
Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
-
Reading Comprehension — Understanding written sentences and paragraphs in work-related documents.
back to top
Knowledge
-
Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
-
Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
-
English Language — Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
back to top
Education
How much education does a new hire need to perform a job in this occupation? Respondents said:
back to top
Abilities
-
Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
-
Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
-
Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
-
Near Vision — The ability to see details at close range (within a few feet of the observer).
-
Reaction Time — The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
-
Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
-
Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
-
Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense.
-
Selective Attention — The ability to concentrate on a task over a period of time without being distracted.
-
Static Strength — The ability to exert maximum muscle force to lift, push, pull, or carry objects.
-
Trunk Strength — The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
-
Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
-
Multilimb Coordination — The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
-
Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
-
Oral Expression — The ability to communicate information and ideas in speaking so others will understand.
-
Rate Control — The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
-
Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
-
Written Comprehension — The ability to read and understand information and ideas presented in writing.
back to top
Interests
-
Realistic — Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.
-
Conventional — Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or human resources.
back to top
Work Values
-
Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
-
Achievement — Occupations that satisfy this work value are results oriented and allow employees to use their strongest abilities, giving them a feeling of accomplishment. Corresponding needs are Ability Utilization and Achievement.
-
Independence — Occupations that satisfy this work value allow employees to work on their own and make decisions. Corresponding needs are Creativity, Responsibility and Autonomy.
back to top
Work Styles
-
Attention to Detail — Job requires being careful about detail and thorough in completing work tasks.
-
Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations.
-
Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
-
Initiative — Job requires a willingness to take on responsibilities and challenges.
-
Stress Tolerance — Job requires accepting criticism and dealing calmly and effectively with high-stress situations.
-
Concern for Others — Job requires being sensitive to others' needs and feelings and being understanding and helpful on the job.
-
Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace.
-
Integrity — Job requires being honest and ethical.
-
Self-Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
-
Independence — Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.
-
Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
-
Persistence — Job requires persistence in the face of obstacles.
-
Innovation — Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.
-
Analytical Thinking — Job requires analyzing information and using logic to address work-related issues and problems.
-
Social Orientation — Job requires preferring to work with others rather than alone, and being personally connected with others on the job.
-
Leadership — Job requires a willingness to lead, take charge, and offer opinions and direction.
back to top
Wages & Employment Trends
- Median wages (2023)
- $22.65 hourly, $47,110 annual
- State wages
-
- Local wages
-
- Employment (2022)
- 19,700 employees
- Projected growth (2022-2032)
-
Decline (-2% or lower)
- Projected job openings (2022-2032)
- 2,200
- State trends
-
- Top industries (2022)
-
Source: Bureau of Labor Statistics 2023 wage data
external site and 2022-2032 employment projections
external site.
“Projected growth” represents the estimated change in total employment over the projections period (2022-2032). “Projected job openings” represent openings due to growth and replacement.
back to top
Job Openings on the Web
- State job openings
-
- Local job openings
-
back to top
back to top
Professional Associations
Disclaimer:
Sources are listed to provide additional information on related jobs, specialties, and/or industries.
Links to non-DOL Internet sites are provided for your convenience and do not constitute an endorsement.
Actively assisted with the O*NET data collection, helping to identify occupational experts who can be surveyed about their work in the occupation.
View the list of Allies
National Associations
Accreditation, Certification, & Unions
back to top