- Install new robotic systems in stationary positions or on tracks.
Occupations with related tasks Save Table: XLSX CSV
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Adjust, repair, or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Design electrical and mechanical systems for avionic instrumentation applications.
- Exchange cooling system components in various vehicles.
- Finish vehicle instrumentation and deinstrumentation.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Lay gas and oil pipelines.
- Unscrew or tighten pipes, casing, tubing, and pump rods, using hand and power wrenches and tongs.
- Dismantle and repair oil field machinery, boilers, and steam engine parts, using hand tools and power tools.
- Guide cranes to move loads about decks.
- Walk flow lines to locate leaks, using electronic detectors and by making visual inspections, and repair the leaks.
- Bolt together pump and engine parts.
- Move pipes to and from trucks, using truck winches and motorized lifts, or by hand.
- Clean trucks used in the fields.
- Bolt or nail together wood or steel framework to erect derricks.
- Dig holes, set forms, and mix and pour concrete into forms to make foundations for wood or steel derricks.
- Supply equipment to rig floors as requested and provide assistance to roughnecks.
- Clean up spilled oil by bailing it into barrels.
- Keep pipe deck and main deck areas clean and tidy.
- Dig drainage ditches around wells and storage tanks.
- Cut down and remove trees and brush to clear drill sites, to reduce fire hazards, and to make way for roads to sites.
- Lay gas and oil pipelines.
- Design, install, or troubleshoot manufacturing equipment.
- Troubleshoot new or existing product problems involving designs, materials, or processes.
- Investigate or resolve operational problems, such as material use variances or bottlenecks.
- Identify opportunities or implement changes to improve manufacturing processes or products or to reduce costs, using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.
- Apply continuous improvement methods, such as lean manufacturing, to enhance manufacturing quality, reliability, or cost-effectiveness.
- Provide technical expertise or support related to manufacturing.
- Incorporate new manufacturing methods or processes to improve existing operations.
- Review product designs for manufacturability or completeness.
- Determine root causes of failures or recommend changes in designs, tolerances, or processing methods, using statistical procedures.
- Prepare reports summarizing information or trends related to manufacturing performance.
- Prepare documentation for new manufacturing processes or engineering procedures.
- Design layout of equipment or workspaces to achieve maximum efficiency.
- Communicate manufacturing capabilities, production schedules, or other information to facilitate production processes.
- Supervise technicians, technologists, analysts, administrative staff, or other engineers.
- Evaluate manufactured products according to specifications and quality standards.
- Estimate costs, production times, or staffing requirements for new designs.
- Train production personnel in new or existing methods.
- Design tests of finished products or process capabilities to establish standards or validate process requirements.
- Analyze the financial impacts of sustainable manufacturing processes or sustainable product manufacturing.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Purchase equipment, materials, or parts.
- Evaluate current or proposed manufacturing processes or practices for environmental sustainability, considering factors such as greenhouse gas emissions, air pollution, water pollution, energy use, or waste creation.
- Read current literature, talk with colleagues, participate in educational programs, attend meetings or workshops, or participate in professional organizations or conferences to keep abreast of developments in the manufacturing field.
- Redesign packaging for manufactured products to minimize raw material use or waste.
- Design, install, or troubleshoot manufacturing equipment.
- Install, calibrate, operate, or maintain robots.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Evaluate robotic systems or prototypes.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Install, calibrate, operate, or maintain robots.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Recommend design modifications to eliminate machine or system malfunctions.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Design test control apparatus or equipment or develop procedures for testing products.
- Provide feedback to design engineers on customer problems or needs.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Write performance requirements for product development or engineering projects.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Solicit new business.
- Provide technical customer service.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
