- Oil winch drums so that cables will wind smoothly.
Occupations with related tasks Save Table: XLSX CSV
- Splice and repair ropes, wire cables, or cordage, using marlinespikes, wire cutters, twine, and hand tools.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Maintain a ship's engines under the direction of the ship's engineering officers.
- Lubricate machinery, equipment, or engine parts, such as gears, shafts, or bearings.
- Provide engineers with assistance in repairing or adjusting machinery.
- Tie barges together into tow units for tugboats to handle, inspecting barges periodically during voyages and disconnecting them when destinations are reached.
- Attach hoses and operate pumps to transfer substances to and from liquid cargo tanks.
- Handle lines to moor vessels to wharfs, to tie up vessels to other vessels, or to rig towing lines.
- Read pressure and temperature gauges or displays and record data in engineering logs.
- Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate navigational aids, such as buoys or lighthouses.
- Maintain government-issued certifications, as required.
- Examine machinery to verify specified pressures or lubricant flows.
- Break out, rig, and stow cargo-handling gear, stationary rigging, or running gear.
- Lower and man lifeboats when emergencies occur.
- Sweep, mop, and wash down decks to remove oil, dirt, and debris, using brooms, mops, brushes, and hoses.
- Load or unload materials, vehicles, or passengers from vessels.
- Chip and clean rust spots on decks, superstructures, or sides of ships, using wire brushes and hand or air chipping machines.
- Paint or varnish decks, superstructures, lifeboats, or sides of ships.
- Give directions to crew members engaged in cleaning wheelhouses or quarterdecks.
- Stand by wheels when ships are on automatic pilot, and verify accuracy of courses, using magnetic compasses.
- Steer ships under the direction of commanders or navigating officers or direct helmsmen to steer, following designated courses.
- Relay specified signals to other ships, using visual signaling devices, such as blinker lights or semaphores.
- Overhaul lifeboats or lifeboat gear and lower or raise lifeboats with winches or falls.
- Stand gangway watches to prevent unauthorized persons from boarding ships while in port.
- Record data in ships' logs, such as weather conditions or distances traveled.
- Measure depth of water in shallow or unfamiliar waters, using leadlines, and telephone or shout depth information to vessel bridges.
- Clean and polish wood trim, brass, or other metal parts.
- Participate in shore patrols.
- Splice and repair ropes, wire cables, or cordage, using marlinespikes, wire cutters, twine, and hand tools.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Maintain a ship's engines under the direction of the ship's engineering officers.
- Lubricate machinery, equipment, or engine parts, such as gears, shafts, or bearings.
- Provide engineers with assistance in repairing or adjusting machinery.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Determine load weights and check them against lifting capacities to prevent overload.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Weigh bundles, using floor scales, and record weights for company records.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Operate consoles to control automatic palletizing equipment.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Operate elevator systems in conjunction with conveyor systems.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Oil, lubricate, and adjust conveyors, crushers, and other equipment, using hand tools and lubricating equipment.
- Replace hydraulic hoses, headlight bulbs, and gathering-arm teeth.
- Handle high voltage sources and hang electrical cables.
- Drive loaded shuttle cars to ramps and move controls to discharge loads into mine cars or onto conveyors.
- Pry off loose material from roofs and move it into the paths of machines, using crowbars.
- Move trailing electrical cables clear of obstructions, using rubber safety gloves.
- Control conveyors that run the entire length of shuttle cars to distribute loads as loading progresses.
- Observe hand signals, grade stakes, or other markings when operating machines.
- Examine roadway and clear obstructions from the path of travel.
- Drive machines into piles of material blasted from working faces.
- Operate levers to move conveyor booms or shovels so that mine contents such as coal, rock, and ore can be placed into cars or onto conveyors.
- Clean, fuel, service, and perform safety checks on all equipment, and repair and replace parts as necessary.
- Clean hoppers, and clean spillage from tracks, walks, driveways, and conveyor decking.
- Monitor loading processes to ensure that materials are loaded according to specifications.
- Measure, weigh, or verify levels of rock, gravel, or other excavated material to prevent equipment overloads.
- Stop gathering arms when cars are full.
- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
- Advance machines to gather material and convey it into cars.
- Signal workers to move loaded cars.
- Guide and stop cars by switching, applying brakes, or placing scotches, or wooden wedges, between wheels and rails.
- Observe and record car numbers, carriers, customers, tonnages, and grades and conditions of material.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
- Notify switching departments to deliver specific types of cars.
- Inspect boarding and locking of open-top box cars and wedging of side-drop and hopper cars to prevent loss of material in transit.
- Maintain records of materials moved.
- Direct other workers to move stakes, place blocks, position anchors or cables, or move materials.
- Push or ride cars down slopes, or hook cars to cables and control cable drum brakes, to ease cars down inclines.
- Open and close bottom doors of cars to dump contents.
- Oil, lubricate, and adjust conveyors, crushers, and other equipment, using hand tools and lubricating equipment.
- Replace hydraulic hoses, headlight bulbs, and gathering-arm teeth.
- Clean, lubricate, and repair pumps and vessels, using hand tools and equipment.
- Monitor gauges and flowmeters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
- Record operating data such as products and quantities pumped, stocks used, gauging results, and operating times.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of interconnections and capacities of pipelines, valve manifolds, pumps, and tankage.
- Turn valves and start pumps to start or regulate flows of substances such as gases, liquids, slurries, or powdered materials.
- Communicate with other workers, using signals, radios, or telephones, to start and stop flows of materials or substances.
- Connect hoses and pipelines to pumps and vessels prior to material transfer, using hand tools.
- Tend vessels that store substances such as gases, liquids, slurries, or powdered materials, checking levels of substances by using calibrated rods or by reading mercury gauges and tank charts.
- Read operating schedules or instructions or receive verbal orders to determine amounts to be pumped.
- Test materials and solutions, using testing equipment.
- Tend auxiliary equipment such as water treatment and refrigeration units, and heat exchangers.
- Add chemicals and solutions to tanks to ensure that specifications are met.
- Collect and deliver sample solutions for laboratory analysis.
- Pump two or more materials into one tank to blend mixtures.
- Clean, lubricate, and repair pumps and vessels, using hand tools and equipment.
- Lubricate, adjust, or repair machinery and replace parts, such as gears, bearings, or bucket teeth.
- Move levers, depress foot pedals, and turn dials to operate power machinery, such as power shovels, stripping shovels, scraper loaders, or backhoes.
- Set up or inspect equipment prior to operation.
- Become familiar with digging plans, machine capabilities and limitations, and efficient and safe digging procedures in a given application.
- Observe hand signals, grade stakes, or other markings when operating machines so that work can be performed to specifications.
- Operate machinery to perform activities such as backfilling excavations, vibrating or breaking rock or concrete, or making winter roads.
- Receive written or oral instructions regarding material movement or excavation.
- Move materials over short distances, such as around a construction site, factory, or warehouse.
- Create or maintain inclines or ramps.
- Handle slides, mud, or pit cleanings or maintenance.
- Direct workers engaged in placing blocks or outriggers to prevent capsizing of machines when lifting heavy loads.
- Measure and verify levels of rock or gravel, bases, or other excavated material.
- Direct ground workers engaged in activities such as moving stakes or markers, or changing positions of towers.
- Adjust dig face angles for varying overburden depths and set lengths.
- Drive machines to work sites.
- Perform manual labor to prepare or finish sites, such as shoveling materials by hand.
- Lubricate, adjust, or repair machinery and replace parts, such as gears, bearings, or bucket teeth.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Seal outlet valves on tank cars, barges, and trucks.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Adjust or replace equipment parts, such as rollers, belts, plugs, or caps, using hand tools.
- Move freight, stock, or other materials to and from storage or production areas, loading docks, delivery vehicles, ships, or containers, by hand or using trucks, tractors, or other equipment.
- Sort cargo before loading and unloading.
- Attach identifying tags to containers or mark them with identifying information.
- Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
- Stack cargo in locations, such as transit sheds or in holds of ships as directed, using pallets or cargo boards.
- Record numbers of units handled or moved, using daily production sheets or work tickets.
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Direct spouts and position receptacles, such as bins, carts, or containers, so they can be loaded.
- Attach slings, hooks, or other devices to lift cargo and guide loads.
- Maintain equipment storage areas to ensure that inventory is protected.
- Adjust controls to guide, position, or move equipment, such as cranes, booms, or cameras.
- Guide loads being lifted to prevent swinging.
- Wash out cargo containers or storage areas.
- Pack containers and re-pack damaged containers.
- Carry needed tools or supplies from storage or trucks and return them after use.
- Shovel material, such as gravel, ice, or spilled concrete, into containers or bins or onto conveyors.
- Connect electrical equipment to power sources so that it can be tested before use.
- Carry out general yard duties, such as performing shunting on railway lines.
- Rig or dismantle props or equipment, such as frames, scaffolding, platforms, or backdrops, using hand tools.
- Bundle and band material such as fodder or tobacco leaves, using banding machines.
- Adjust or replace equipment parts, such as rollers, belts, plugs, or caps, using hand tools.
