- Examine damaged vehicle to determine extent of structural, body, mechanical, electrical, or interior damage.
Occupations with related tasks Save Table: XLSX CSV
- Inspect vehicles or other equipment for evidence of abuse, damage, or mechanical malfunction.
- Inspect vehicles or equipment to ensure compliance with rules, standards, or regulations.
- Inspect repairs to transportation vehicles or equipment to ensure that repair work was performed properly.
- Identify modifications to engines, fuel systems, emissions control equipment, or other vehicle systems to determine the impact of modifications on inspection procedures or conclusions.
- Perform low-pressure fuel evaluative tests (LPFET) to test for harmful emissions from vehicles without onboard diagnostics (OBD) equipment.
- Conduct remote inspections of motor vehicles, using handheld controllers and remotely directed vehicle inspection devices.
- Compare emissions findings with applicable emissions standards.
- Conduct visual inspections of emission control equipment and smoke emitted from gasoline or diesel vehicles.
- Conduct vehicle or transportation equipment tests, using diagnostic equipment.
- Identify emissions testing procedures and standards appropriate for the age and technology of vehicles.
- Prepare reports on investigations or inspections and actions taken.
- Issue notices and recommend corrective actions when infractions or problems are found.
- Investigate and make recommendations on carrier requests for waiver of federal standards.
- Investigate incidents or violations, such as delays, accidents, and equipment failures.
- Negotiate with authorities, such as local government officials, to eliminate hazards along transportation routes.
- Review commercial vehicle logs, shipping papers, or driver and equipment records to detect any problems or to ensure compliance with regulations.
- Attach onboard diagnostics (OBD) scanner cables to vehicles to conduct emissions inspections.
- Investigate complaints regarding safety violations.
- Examine carrier operating rules, employee qualification guidelines, or carrier training and testing programs for compliance with regulations or safety standards.
- Monitor or review output from systems, such as Thermal Imaging Units (TIU) or roadside imaging tools, to identify high-risk commercial motor vehicles for follow-up inspections.
- Evaluate new methods of packaging, testing, shipping, or transporting hazardous materials to ensure adequate public safety protection.
- Inspect vehicles or other equipment for evidence of abuse, damage, or mechanical malfunction.
- Inspect vehicles or equipment to ensure compliance with rules, standards, or regulations.
- Inspect repairs to transportation vehicles or equipment to ensure that repair work was performed properly.
- Identify modifications to engines, fuel systems, emissions control equipment, or other vehicle systems to determine the impact of modifications on inspection procedures or conclusions.
- Perform low-pressure fuel evaluative tests (LPFET) to test for harmful emissions from vehicles without onboard diagnostics (OBD) equipment.
- Conduct remote inspections of motor vehicles, using handheld controllers and remotely directed vehicle inspection devices.
- Compare emissions findings with applicable emissions standards.
- Conduct visual inspections of emission control equipment and smoke emitted from gasoline or diesel vehicles.
- Conduct vehicle or transportation equipment tests, using diagnostic equipment.
- Identify emissions testing procedures and standards appropriate for the age and technology of vehicles.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Inspect airframes for wear or other defects.
- Measure parts for wear, using precision instruments.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Obtain fuel and oil samples and check them for contamination.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Measure the tension of control cables.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Clean, refuel, and change oil in line service aircraft.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Cure bonded structures, using portable or stationary curing equipment.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Determine repair limits for engine hot section parts.
- Prepare and paint aircraft surfaces.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Inspect airframes for wear or other defects.
- Measure parts for wear, using precision instruments.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition.
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, or pressure gauges.
- Inspect, repair, and maintain automotive and mechanical equipment and machinery, such as pumps and compressors.
- Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications.
- Use handtools, such as screwdrivers, pliers, wrenches, pressure gauges, or precision instruments, as well as power tools, such as pneumatic wrenches, lathes, welding equipment, or jacks and hoists.
- Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists.
- Adjust and reline brakes, align wheels, tighten bolts and screws, and reassemble equipment.
- Attach test instruments to equipment, and read dials and gauges to diagnose malfunctions.
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery.
- Examine and adjust protective guards, loose bolts, and specified safety devices.
- Rewire ignition systems, lights, and instrument panels.
- Test drive trucks and buses to diagnose malfunctions or to ensure that they are working properly.
- Diagnose and repair vehicle heating and cooling systems.
- Disassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential units.
- Adjust or repair computer controlled exhaust emissions devices.
- Rebuild gas or diesel engines.
- Specialize in repairing and maintaining parts of the engine, such as fuel injection systems.
- Recondition and replace parts, pistons, bearings, gears, and valves.
- Install or repair accessories.
- Repair or adjust seats, doors, or windows.
- Dismount, mount, and repair or replace tires.
- Align front ends and suspension systems.
- Maintain or repair vehicles with alternative fuel systems, including biodiesel, hybrid, or compressed natural gas vehicles.
- Measure vehicle emissions to determine whether they are within acceptable limits.
- Follow green operational practices involving conservation of water or energy or reduction of solid waste.
- Operate valve-grinding machines to grind and reset valves.
- Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition.
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, or pressure gauges.
- Inspect, repair, and maintain automotive and mechanical equipment and machinery, such as pumps and compressors.
- Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications.
- Inspect tire casings for defects, such as holes or tears.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Inflate inner tubes and immerse them in water to locate leaks.
- Raise vehicles, using hydraulic jacks.
- Remount wheels onto vehicles.
- Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.
- Place wheels on balancing machines to determine counterweights required to balance wheels.
- Identify tire size and ply and inflate tires accordingly.
- Replace valve stems and remove puncturing objects.
- Hammer required counterweights onto rims of wheels.
- Reassemble tires onto wheels.
- Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.
- Glue tire patches over ruptures in tire casings, using rubber cement.
- Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.
- Rotate tires to different positions on vehicles, using hand tools.
- Clean and tidy up the shop.
- Buff defective areas of inner tubes, using scrapers.
- Order replacements for tires or tubes.
- Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.
- Clean sides of whitewall tires.
- Roll new rubber treads, known as camelbacks, over tire casings and mold the semi-raw rubber treads onto the buffed casings.
- Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.
- Apply rubber cement to buffed tire casings prior to vulcanization process.
- Patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.
- Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
- Inspect tire casings for defects, such as holes or tears.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Inflate inner tubes and immerse them in water to locate leaks.
- Inspect components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Examine car roofs for wear and damage, and repair defective sections, using roofing material, cement, nails, and waterproof paint.
- Inspect the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Record conditions of cars, and repair and maintenance work performed or to be performed.
- Repair or replace defective or worn parts such as bearings, pistons, and gears, using hand tools, torque wrenches, power tools, and welding equipment.
- Remove locomotives, car mechanical units, or other components, using pneumatic hoists and jacks, pinch bars, hand tools, and cutting torches.
- Test units for operability before and after repairs.
- Adjust repaired or replaced units as needed to ensure proper operation.
- Repair, fabricate, and install steel or wood fittings, using blueprints, shop sketches, and instruction manuals.
- Perform scheduled maintenance, and clean units and components.
- Paint car exteriors, interiors, and fixtures.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Disassemble units such as water pumps, control valves, and compressors so that repairs can be made.
- Measure diameters of axle wheel seats, using micrometers, and mark dimensions on axles so that wheels can be bored to specified dimensions.
- Test electrical systems of cars by operating systems and using testing equipment such as ammeters.
- Replace defective wiring and insulation, and tighten electrical connections, using hand tools.
- Install and repair interior flooring, fixtures, walls, plumbing, steps, and platforms.
- Repair window sash frames, attach weather stripping and channels to frames, and replace window glass, using hand tools.
- Align car sides for installation of car ends and crossties, using width gauges, turnbuckles, and wrenches.
- Repair car upholstery.
- Inspect components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Examine car roofs for wear and damage, and repair defective sections, using roofing material, cement, nails, and waterproof paint.
- Inspect the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Inspect and repair or adjust propellers or propeller shafts.
- Disassemble and inspect motors to locate defective parts, using mechanic's hand tools and gauges.
- Start motors and monitor performance for signs of malfunctioning, such as smoke, excessive vibration, or misfiring.
- Document inspection and test results and work performed or to be performed.
- Mount motors to boats, and operate boats at various speeds on waterways to conduct operational tests.
- Repair engine mechanical equipment, such as power tilts, bilge pumps, or power take-offs.
- Perform routine engine maintenance on motorboats, such as changing oil and filters.
- Replace parts, such as gears, magneto points, piston rings, or spark plugs, and reassemble engines.
- Idle motors and observe thermometers to determine the effectiveness of cooling systems.
- Adjust carburetor mixtures, electrical point settings, or timing while motors are running in water-filled test tanks.
- Set starter locks and align and repair steering or throttle controls, using gauges, screwdrivers, or wrenches.
- Adjust generators and replace faulty wiring, using hand tools and soldering irons.
- Repair or rework parts, using machine tools such as lathes, mills, drills, or grinders.
- Inspect and repair or adjust propellers or propeller shafts.
- Disassemble and inspect motors to locate defective parts, using mechanic's hand tools and gauges.
- Test and inspect engines to determine malfunctions, to locate missing and broken parts, and to verify repairs, using diagnostic instruments.
- Dismantle engines, using hand tools, and examine parts for defects.
- Record repairs made, time spent, and parts used.
- Repair and maintain gasoline engines used to power equipment such as portable saws, lawn mowers, generators, and compressors.
- Adjust points, valves, carburetors, distributors, and spark plug gaps, using feeler gauges.
- Repair or replace defective parts such as magnetos, water pumps, gears, pistons, and carburetors, using hand tools.
- Perform routine maintenance such as cleaning and oiling parts, honing cylinders, and tuning ignition systems.
- Reassemble engines after repair or maintenance work is complete.
- Replace motors.
- Obtain problem descriptions from customers, and prepare cost estimates for repairs.
- Show customers how to maintain equipment.
- Remove engines from equipment, and position and bolt engines to repair stands.
- Sell parts and equipment.
- Grind, ream, rebore, and re-tap parts to obtain specified clearances, using grinders, lathes, taps, reamers, boring machines, and micrometers.
- Test and inspect engines to determine malfunctions, to locate missing and broken parts, and to verify repairs, using diagnostic instruments.
- Dismantle engines, using hand tools, and examine parts for defects.
- Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Arrange to pick up particular customers or groups on a regular schedule.
- Collect fares or vouchers from passengers, and make change or issue receipts as necessary.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Complete accident reports when necessary.
- Comply with traffic regulations to operate vehicles in a safe and courteous manner.
- Drive shuttle busses, limousines, company cars, or privately owned vehicles to transport passengers.
- Follow relevant safety regulations and state laws governing vehicle operation, and ensure that passengers follow safety regulations.
- Maintain knowledge of first-aid procedures.
- Notify dispatchers or company mechanics of vehicle problems.
- Operate vehicles with specialized equipment, such as wheelchair lifts, to transport and secure passengers with special needs.
- Perform errands for customers or employers, such as delivering or picking up mail and packages.
- Perform minor vehicle repairs, such as cleaning spark plugs, or take vehicles to mechanics for servicing.
- Perform routine vehicle maintenance, such as regulating tire pressure and adding gasoline, oil, and water.
- Pick up and drop off passengers at regularly scheduled neighborhood locations, following strict time schedules.
- Pick up or meet passengers according to requests, appointments, or schedules.
- Prepare and submit reports that may include the number of passengers or trips, hours worked, mileage driven fuel consumed, or fares received.
- Provide passengers with assistance entering and exiting vehicles, and help them with any luggage.
- Provide passengers with information or advice about the local area, points of interest, hotels, or restaurants.
- Read maps and follow written and verbal geographic directions.
- Record vehicle routes.
- Regulate heating, lighting, and ventilation systems for passenger comfort.
- Report any vehicle malfunctions or needed repairs.
- Report delays, accidents, or other traffic and transportation situations, using telephones or mobile two-way radios.
- Vacuum and clean interiors, and wash and polish exteriors of automobiles.
- Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Inspect, repair, or replace brake systems.
- Confer with customers, read work orders, or examine vehicles needing repair to determine the nature and extent of damage.
- Inspect recreational vehicles to diagnose problems and perform necessary adjustment, repair, or overhaul.
- Explain proper operation of vehicle systems to customers.
- Locate and repair frayed wiring, broken connections, or incorrect wiring, using ohmmeters, soldering irons, tape, or hand tools.
- Repair plumbing or propane gas lines, using caulking compounds and plastic or copper pipe.
- Examine or test operation of parts or systems to ensure completeness of repairs.
- Connect electrical systems to outside power sources, and activate switches to test the operation of appliances or light fixtures.
- Connect water hoses to inlet pipes of plumbing systems, and test operation of toilets or sinks.
- Diagnose and repair furnace or air conditioning systems.
- Repair leaks with caulking compound or replace pipes, using pipe wrenches.
- List parts needed, estimate costs, and plan work procedures, using parts lists, technical manuals, or diagrams.
- Remove damaged exterior panels, and repair and replace structural frame members.
- Open and close doors, windows, or drawers to test their operation, trimming edges to fit, as necessary.
- Reset hardware, using chisels, mallets, and screwdrivers.
- Refinish wood surfaces on cabinets, doors, moldings, or floors, using power sanders, putty, spray equipment, brushes, paints, or varnishes.
- Seal open sides of modular units to prepare them for shipment, using polyethylene sheets, nails, and hammers.
- Inspect, repair, or replace brake systems.
- Confer with customers, read work orders, or examine vehicles needing repair to determine the nature and extent of damage.
- Inspect recreational vehicles to diagnose problems and perform necessary adjustment, repair, or overhaul.
- Follow checklists to ensure all important parts are examined, including belts, hoses, steering systems, spark plugs, brake and fuel systems, wheel bearings, and other potentially troublesome areas.
- Inspect vehicles for damage and record findings so that necessary repairs can be made.
- Test drive vehicles and test components and systems, using equipment such as infrared engine analyzers, compression gauges, and computerized diagnostic devices.
- Test and adjust repaired systems to meet manufacturers' performance specifications.
- Repair, reline, replace, and adjust brakes.
- Review work orders and discuss work with supervisors.
- Estimate costs of vehicle repair.
- Confer with customers to obtain descriptions of vehicle problems and to discuss work to be performed and future repair requirements.
- Align vehicles' front ends.
- Align wheels, axles, frames, torsion bars, and steering mechanisms of automobiles, using special alignment equipment and wheel-balancing machines.
- Tear down, repair, and rebuild faulty assemblies, such as power systems, steering systems, and linkages.
- Perform routine and scheduled maintenance services, such as oil changes, lubrications, and tune-ups.
- Plan work procedures, using charts, technical manuals, and experience.
- Maintain cleanliness of work area.
- Change spark plugs, fuel filters, air filters, and batteries in hybrid electric vehicles.
- Repair and service air conditioning, heating, engine cooling, and electrical systems.
- Disassemble units and inspect parts for wear, using micrometers, calipers, and gauges.
- Test electronic computer components in automobiles to ensure proper operation.
- Overhaul or replace carburetors, blowers, generators, distributors, starters, and pumps.
- Repair or replace parts such as pistons, rods, gears, valves, and bearings.
- Rewire ignition systems, lights, and instrument panels.
- Troubleshoot fuel, ignition, and emissions control systems, using electronic testing equipment.
- Tune automobile engines to ensure proper and efficient functioning.
- Repair, replace, or adjust defective fuel injectors, carburetor parts, and gasoline filters.
- Install, adjust, or repair hydraulic or electromagnetic automatic lift mechanisms used to raise and lower automobile windows, seats, and tops.
- Conduct visual inspections of compressed natural gas fuel systems to identify cracks, gouges, abrasions, discoloration, broken fibers, loose brackets, damaged gaskets, or other problems.
- Rebuild parts, such as crankshafts and cylinder blocks.
- Diagnose and replace or repair engine management systems or related sensors for flexible fuel vehicles (FFVs) with ignition timing, fuel rate, alcohol concentration, or air-to-fuel ratio malfunctions.
- Repair or rebuild transmissions.
- Retrofit vehicle fuel systems with aftermarket products, such as vapor transfer devices, evaporation control devices, swirlers, lean burn devices, and friction reduction devices, to enhance combustion and fuel efficiency.
- Follow checklists to ensure all important parts are examined, including belts, hoses, steering systems, spark plugs, brake and fuel systems, wheel bearings, and other potentially troublesome areas.
- Inspect vehicles for damage and record findings so that necessary repairs can be made.
- Test and charge batteries.
- Collect cash payments from customers, and make change or charge purchases to customers' credit cards, providing customers with receipts.
- Check tire pressure and levels of fuel, motor oil, transmission, radiator, battery, or other fluids, adding air or fluids as required.
- Perform minor repairs, such as adjusting brakes, replacing spark plugs, or changing engine oil or filters.
- Clean parking areas, offices, restrooms, or equipment, and remove trash.
- Order stock, and price and shelve incoming goods.
- Sell and install accessories, such as batteries, windshield wiper blades, fan belts, bulbs, or headlamps.
- Grease and lubricate vehicles or specified units, such as springs, universal joints, or steering knuckles, using grease guns or spray lubricants.
- Rotate, test, and repair or replace tires.
- Prepare daily reports of fuel, oil, and accessory sales.
- Clean windshields.
- Activate fuel pumps and fill fuel tanks of vehicles with gasoline or diesel fuel to specified levels.
- Maintain customer records and follow up periodically with telephone, mail, or personal reminders of services due.
- Provide customers with information about local roads or highways.
- Operate car washes.
- Test and charge batteries.
- Inspect vehicles and check gas, oil, and water levels prior to departure.
- Drive vehicles over specified routes or to specified destinations according to time schedules, complying with traffic regulations to ensure that passengers have a smooth and safe ride.
- Park vehicles at loading areas so that passengers can board.
- Announce stops to passengers.
- Assist passengers, such as elderly or disabled individuals, on and off bus, ensure they are seated properly, help carry baggage, and answer questions about bus schedules or routes.
- Collect tickets or cash fares from passengers.
- Handle passenger emergencies or disruptions.
- Report delays or accidents.
- Advise passengers to be seated and orderly while on vehicles.
- Regulate heating, lighting, and ventilating systems for passenger comfort.
- Record information, such as cash receipts and ticket fares, and maintain log book.
- Maintain cleanliness of bus or motor coach.
- Read maps to plan bus routes.
- Load and unload baggage in baggage compartments.
- Make minor repairs to vehicle and change tires.
- Inspect vehicles and check gas, oil, and water levels prior to departure.
- Inspect and maintain vehicle supplies and equipment, such as gas, oil, water, tires, lights, or brakes, to ensure that vehicles are in proper working condition.
- Obey traffic laws and follow established traffic and transportation procedures.
- Report any mechanical problems encountered with vehicles.
- Verify the contents of inventory loads against shipping papers.
- Read maps and follow written or verbal geographic directions.
- Load and unload trucks, vans, or automobiles.
- Present bills and receipts and collect payments for goods delivered or loaded.
- Maintain records, such as vehicle logs, records of cargo, or billing statements, in accordance with regulations.
- Drive vehicles with capacities under three tons to transport materials to and from specified destinations, such as railroad stations, plants, residences, offices, or within industrial yards.
- Turn in receipts and money received from deliveries.
- Sell products from truck inventory and keep records of sales.
- Use and maintain the tools or equipment found on commercial vehicles, such as weighing or measuring devices.
- Drive trucks equipped with public address systems through city streets to broadcast announcements for advertising or publicity purposes.
- Report delays, accidents, or other traffic and transportation situations to bases or other vehicles, using telephones or mobile two-way radios.
- Perform emergency repairs, such as changing tires or installing light bulbs, fuses, tire chains, or spark plugs.
- Inspect and maintain vehicle supplies and equipment, such as gas, oil, water, tires, lights, or brakes, to ensure that vehicles are in proper working condition.
- Inspect trucks prior to beginning routes to ensure safe operating condition.
- Drive trucks, following established routes, through residential streets or alleys or through business or industrial areas.
- Refuel trucks or add other fluids, such as oil or brake fluid.
- Dump refuse or recyclable materials at disposal sites.
- Fill out defective equipment reports.
- Operate automated or semi-automated hoisting devices that raise refuse bins and dump contents into openings in truck bodies.
- Dismount garbage trucks to collect garbage and remount trucks to ride to the next collection point.
- Operate equipment that compresses collected refuse.
- Communicate with dispatchers concerning delays, unsafe sites, accidents, equipment breakdowns, or other maintenance problems.
- Check road or weather conditions to determine how routes will be affected.
- Clean trucks or compactor bodies after routes have been completed.
- Tag garbage or recycling containers to inform customers of problems, such as excess garbage or inclusion of items that are not permitted.
- Sort items set out for recycling and throw materials into designated truck compartments.
- Make special pickups of recyclable materials, such as food scraps, used oil, discarded computers, or other electronic items.
- Organize schedules for refuse collection.
- Provide quotes for refuse collection contracts.
- Inspect trucks prior to beginning routes to ensure safe operating condition.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Collect fares or vouchers from passengers, and make change or issue receipts as necessary.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Complete accident reports when necessary.
- Determine fares based on trip distances and times, using taximeters and fee schedules, and announce fares to passengers.
- Drive taxicabs or privately owned vehicles to transport passengers.
- Follow relevant safety regulations and state laws governing vehicle operation, and ensure that passengers follow safety regulations.
- Notify dispatchers or company mechanics of vehicle problems.
- Perform minor vehicle repairs, such as cleaning spark plugs, or take vehicles to mechanics for servicing.
- Perform routine vehicle maintenance, such as regulating tire pressure and adding gasoline, oil, and water.
- Pick up passengers at prearranged locations, at taxi stands, or by cruising streets in high-traffic areas.
- Provide passengers with assistance entering and exiting vehicles, and help them with any luggage.
- Provide passengers with information or advice about the local area, points of interest, hotels, or restaurants.
- Report to taxicab services or garages to receive vehicle assignments.
- Turn the taximeter on when passengers enter the cab, and turn it off when they reach the final destination.
- Vacuum and clean interiors and wash and polish exteriors of automobiles.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
- Comply with traffic regulations to operate vehicles in a safe and courteous manner.
- Drive gasoline, diesel, or electrically powered multi-passenger vehicles to transport students between neighborhoods, schools, and school activities.
- Escort small children across roads and highways.
- Follow safety rules as students board and exit buses or cross streets near bus stops.
- Keep bus interiors clean for students.
- Maintain knowledge of first-aid procedures.
- Maintain order among students during trips to ensure safety.
- Make minor repairs to vehicles.
- Pick up and drop off students at regularly scheduled neighborhood locations, following strict time schedules.
- Prepare and submit reports that may include the number of students or trips, hours worked, mileage, or fuel consumption.
- Read maps and follow written and verbal geographic directions.
- Record bus routes.
- Regulate heating, lighting, and ventilation systems for student comfort.
- Report any bus malfunctions or needed repairs.
- Report delays, accidents, or other traffic and transportation situations, using telephones or mobile two-way radios.
- Report delinquent student behaviors to school administration.
- Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
- Inspect aircraft components to locate cracks, breaks, leaks, or other problems.
- Apply de-icing fluid to aircraft from baskets lifted by truck-mounted cranes.
- Change aircraft oil, coolant, or other fluids.
- Clean aircraft interiors by picking up waste, wiping down windows, or vacuuming.
- Climb ladders to reach aircraft surfaces to be cleaned.
- Complete forms describing tasks completed.
- De-grease aircraft exteriors.
- Empty aircraft lavatory systems or refill them with sanitizer fluid.
- Guide aircraft to designated areas using hand signals, batons, or other methods.
- Load baggage or cargo for crew or passengers.
- Mix cleaning compounds or solutions.
- Polish aircraft exteriors.
- Radio to flight dispatchers or other personnel to discuss incoming or outgoing aircraft.
- Refill aircraft potable water tanks.
- Refuel aircraft using hoses connected to fuel trucks.
- Remove exhaust stains from aircraft using cleaning fluids.
- Tow aircraft to gates or hangars using tugs, tractors, or other vehicles.
- Wash the aircraft exteriors using lifts, cranes, detergent, or other equipment.
- Inspect aircraft components to locate cracks, breaks, leaks, or other problems.
- Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
- Prime all scratches on pinchwelds with primer and allow to dry.
- Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
- Allow all glass parts installed with urethane ample time to cure, taking temperature and humidity into account.
- Apply a bead of urethane around the perimeter of each pinchweld and dress the remaining urethane on the pinchwelds so that it is of uniform level and thickness.
- Select appropriate tools, safety equipment, and parts, according to job requirements.
- Install replacement glass in vehicles.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Replace all moldings, clips, windshield wipers, or other parts that were removed prior to glass replacement or repair.
- Remove broken or damaged glass windshields or window glass from motor vehicles, using hand tools to remove screws from frames holding glass.
- Remove moldings, clips, windshield wipers, screws, bolts, and inside A-pillar moldings and lower headliners in preparation for installation or repair work.
- Install, repair, or replace safety glass and related materials, such as back glass heating elements, on vehicles or equipment.
- Cool or warm glass in the event of temperature extremes.
- Replace or adjust motorized or manual window-raising mechanisms.
- Install new foam dams on pinchwelds, if required.
- Install rubber channeling strips around edges of glass or frames to weatherproof windows or to prevent rattling.
- Hold cut or uneven edges of glass against automated abrasive belts to shape or smooth edges.
- Cut flat safety glass according to specified patterns or perform precision pattern making and glass cutting to custom fit replacement windows.
- Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
- Inspect vehicles to detect any damage.
- Take numbered tags from customers, locate vehicles, and deliver vehicles, or provide customers with instructions for locating vehicles.
- Greet customers and open their car doors.
- Issue ticket stubs or place numbered tags on windshields, log tags or attach tag to customers' keys, and give customers matching tags for locating parked vehicles.
- Perform cash handling tasks, such as making change, balancing and recording cash drawer, or distributing tips.
- Explain and calculate parking charges, collect fees from customers, and respond to customer complaints.
- Park and retrieve automobiles for customers in parking lots, storage garages, or new car lots.
- Provide customer assistance and information, such as giving directions or handling wheelchairs.
- Keep parking areas clean and orderly to ensure that space usage is maximized.
- Call emergency responders or the proper authorities and provide motorist assistance, such as giving directions or helping jump start a stalled vehicle.
- Patrol parking areas to prevent vehicle damage and vehicle or property thefts.
- Direct motorists to parking areas or parking spaces, using hand signals or flashlights as necessary.
- Escort customers to their vehicles to ensure their safety.
- Perform maintenance on cars in storage to protect tires, batteries, or exteriors from deterioration.
- Lift, position, and remove barricades to open or close parking areas.
- Perform personnel activities, such as supervising or scheduling employees.
- Review motorists' identification before allowing them to enter parking facilities.
- Service vehicles with gas, oil, and water.
- Inspect vehicles to detect any damage.
- Examine parts for damage or excessive wear, using micrometers and gauges.
- Repair and replace damaged or worn parts.
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Operate and inspect machines or heavy equipment to diagnose defects.
- Read and understand operating manuals, blueprints, and technical drawings.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Overhaul and test machines or equipment to ensure operating efficiency.
- Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
- Repair, rewire, and troubleshoot electrical systems.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
- Research, order, and maintain parts inventory for services and repairs.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Assemble gear systems, and align frames and gears.
- Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
- Adjust and maintain industrial machinery, using control and regulating devices.
- Fabricate needed parts or items from sheet metal.
- Direct workers who are assembling or disassembling equipment or cleaning parts.
- Examine parts for damage or excessive wear, using micrometers and gauges.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Press buttons to activate cleaning equipment or machines.
- Connect hoses or lines to pumps or other equipment.
- Collect and test samples of cleaning solutions or vapors.
- Clean the plastic work inside cars, using paintbrushes.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Inspect or test materials, stock, vehicles, equipment, or facilities to ensure that they are safe, free of defects, and consistent with specifications.
- Enforce safety rules and regulations.
- Interpret transportation or tariff regulations, shipping orders, safety regulations, or company policies and procedures for workers.
- Resolve worker problems or collaborate with employees to assist in problem resolution.
- Confer with customers, supervisors, contractors, or other personnel to exchange information or to resolve problems.
- Plan work assignments and equipment allocations to meet transportation, operations or production goals.
- Examine, measure, or weigh cargo or materials to determine specific handling requirements.
- Explain and demonstrate work tasks to new workers or assign training tasks to experienced workers.
- Review orders, production schedules, blueprints, or shipping or receiving notices to determine work sequences and material shipping dates, types, volumes, or destinations.
- Drive vehicles or operate machines or equipment to complete work assignments or to assist workers.
- Maintain or verify records of time, materials, expenditures, or crew activities.
- Requisition needed personnel, supplies, equipment, parts, or repair services.
- Recommend and implement measures to improve worker motivation, equipment performance, work methods, or customer services.
- Prepare, compile, and submit reports on work activities, operations, production, or work-related accidents.
- Dispatch personnel and vehicles in response to telephone or radio reports of emergencies.
- Monitor field work to ensure proper performance and use of materials.
- Recommend or implement personnel actions, such as employee selection, evaluation, rewards, or disciplinary actions.
- Perform or schedule repairs or preventive maintenance of vehicles or other equipment.
- Compute or estimate cash, payroll, transportation, personnel, or storage requirements.
- Assist workers in tasks, such as loading vehicles.
- Direct workers in transportation or related services, such as pumping, moving, storing, or loading or unloading of materials.
- Plan and establish schedules.
- Inspect or test materials, stock, vehicles, equipment, or facilities to ensure that they are safe, free of defects, and consistent with specifications.
- Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
- Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
- Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.
- Order parts, supplies, or equipment from catalogs or suppliers.
- Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
- Design new equipment to aid in the repair or maintenance of machines, mechanical equipment, or building structures.
- Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
- Clean or lubricate shafts, bearings, gears, or other parts of machinery.
- Estimate costs to repair machinery, equipment, or building structures.
- Align and balance new equipment after installation.
- Record type and cost of maintenance or repair work.
- Maintain or repair specialized equipment or machinery located in cafeterias, laundries, hospitals, stores, offices, or factories.
- Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools.
- Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
- Install equipment to improve the energy or operational efficiency of residential or commercial buildings.
- Set up and operate machine tools to repair or fabricate machine parts, jigs, fixtures, or tools.
- Perform general cleaning of buildings or properties.
- Train or manage maintenance personnel or subcontractors.
- Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.
- Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
- Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.
- Test and treat water supply.
- Provide groundskeeping services, such as landscaping or snow removal.
- Operate cutting torches or welding equipment to cut or join metal parts.
- Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, or other measuring instruments.
- Assemble boilers at installation sites, using tools such as levels, plumb bobs, hammers, torches, or other hand tools.
- Lay brick to repair or maintain buildings, walls, arches, or other structures.
- Position, attach, or blow insulating materials to prevent energy losses from buildings, pipes, or other structures or objects.
- Grind and reseat valves, using valve-grinding machines.
- Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices.
- Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
- Check all load-related documentation for completeness and accuracy.
- Inspect loads to ensure that cargo is secure.
- Crank trailer landing gear up or down to safely secure vehicles.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
- Read bills of lading to determine assignment details.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
- Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
- Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Drive trucks with capacities greater than 3 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
- Read and interpret maps to determine vehicle routes.
- Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
- Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
- Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
- Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
- Remove debris from loaded trailers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Follow appropriate safety procedures for transporting dangerous goods.
- Inventory and inspect goods to be moved to determine quantities and conditions.
- Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
- Give directions to laborers who are packing goods and moving them onto trailers.
- Operate trucks equipped with snowplows or sander attachments to maintain roads in winter weather.
- Drive electric or hybrid-electric powered trucks or alternative fuel-powered trucks to transport and deliver products, livestock, or other materials.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
