- Prepare mud reports, and instruct crews about the handling of any chemical additives.
Occupations with related tasks Save Table: XLSX CSV
- Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures.
- Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment.
- Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.
- Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
- Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.
- Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps.
- Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools.
- Connect wires to circuit breakers, transformers, or other components.
- Maintain current electrician's license or identification card to meet governmental regulations.
- Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.
- Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.
- Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
- Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.
- Install ground leads and connect power cables to equipment, such as motors.
- Advise management on whether continued operation of equipment could be hazardous.
- Repair or replace wiring, equipment, or fixtures, using hand tools or power tools.
- Construct or fabricate parts, using hand tools, according to specifications.
- Provide preliminary sketches or cost estimates for materials or services.
- Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
- Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects.
- Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles.
- Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures.
- Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment.
- Analyze burn conditions and results, and prepare postburn reports.
- Instruct and drill fire department personnel in assigned duties, including firefighting, medical care, hazardous materials response, fire prevention, and related subjects.
- Perform administrative duties, such as compiling and maintaining records, completing forms, preparing reports, or composing correspondence.
- Direct investigation of cases of suspected arson, hazards, and false alarms and submit reports outlining findings.
- Assign firefighters to jobs at strategic locations to facilitate rescue of persons and maximize application of extinguishing agents.
- Provide emergency medical services as required, and perform light to heavy rescue functions at emergencies.
- Assess nature and extent of fire, condition of building, danger to adjacent buildings, and water supply status to determine crew or company requirements.
- Communicate fire details to superiors, subordinates, or interagency dispatch centers, using two-way radios.
- Serve as a working leader of an engine, hand, helicopter, or prescribed fire crew of three or more firefighters.
- Maintain fire suppression equipment in good condition, checking equipment periodically to ensure that it is ready for use.
- Evaluate the performance of assigned firefighting personnel.
- Direct the training of firefighters, assigning of instructors to training classes, and providing of supervisors with reports on training progress and status.
- Perform maintenance and minor repairs on firefighting equipment, including vehicles, and write and submit proposals to modify, replace, and repair equipment.
- Schedule employee work assignments and set work priorities.
- Monitor fire suppression expenditures to ensure that they are necessary and reasonable.
- Participate in creating fire safety guidelines and evacuation schemes for nonresidential buildings.
- Maintain required maps and records.
- Drive crew carriers to transport firefighters to fire sites.
- Inspect stations, uniforms, equipment, or recreation areas to ensure compliance with safety standards, taking corrective action as necessary.
- Evaluate fire station procedures to ensure efficiency and enforcement of departmental regulations.
- Direct firefighters in station maintenance duties, and participate in these duties.
- Recommend personnel actions related to disciplinary procedures, performance, leaves of absence, and grievances.
- Recommend equipment modifications or new equipment purchases.
- Supervise and participate in the inspection of properties to ensure that they are in compliance with applicable fire codes, ordinances, laws, regulations, and standards.
- Inspect and test new and existing fire protection systems, fire detection systems, and fire safety equipment to ensure that they are operating properly.
- Study and interpret fire safety codes to establish procedures for issuing permits to handle hazardous or flammable substances.
- Evaluate size, location, and condition of fires.
- Maintain knowledge of fire laws and fire prevention techniques and tactics.
- Plan, direct, and supervise prescribed burn projects.
- Recruit or hire firefighting personnel.
- Analyze burn conditions and results, and prepare postburn reports.
- Instruct and drill fire department personnel in assigned duties, including firefighting, medical care, hazardous materials response, fire prevention, and related subjects.
- Perform administrative duties, such as compiling and maintaining records, completing forms, preparing reports, or composing correspondence.
- Direct investigation of cases of suspected arson, hazards, and false alarms and submit reports outlining findings.
- Prepare reports, exhibits, and other supporting schedules that detail an institution's safety and soundness, compliance with laws and regulations, and recommended solutions to questionable financial conditions.
- Train other examiners in the financial examination process.
- Provide regulatory compliance training to employees.
- Direct and participate in formal and informal meetings with bank directors, trustees, senior management, counsels, outside accountants, and consultants to gather information and discuss findings.
- Recommend actions to ensure compliance with laws and regulations, or to protect solvency of institutions.
- Resolve problems concerning the overall financial integrity of banking institutions including loan investment portfolios, capital, earnings, and specific or large troubled accounts.
- Investigate activities of institutions to enforce laws and regulations and to ensure legality of transactions and operations or financial solvency.
- Review balance sheets, operating income and expense accounts, and loan documentation to confirm institution assets and liabilities.
- Plan, supervise, and review work of assigned subordinates.
- Review audit reports of internal and external auditors to monitor adequacy of scope of reports or to discover specific weaknesses in internal routines.
- Examine the minutes of meetings of directors, stockholders, and committees to investigate the specific authority extended at various levels of management.
- Establish guidelines for procedures and policies that comply with new and revised regulations and direct their implementation.
- Review and analyze new, proposed, or revised laws, regulations, policies, and procedures to interpret their meaning and determine their impact.
- Evaluate data processing applications for institutions under examination to develop recommendations for coordinating existing systems with examination procedures.
- Review applications for mergers, acquisitions, establishment of new institutions, acceptance in Federal Reserve System, or registration of securities sales to determine their public interest value and conformance to regulations, and recommend acceptance or rejection.
- Verify and inspect cash reserves, assigned collateral, and bank-owned securities to check internal control procedures.
- Confer with officials of real estate, securities, or financial institution industries to exchange views and discuss issues or pending cases.
- Prepare reports, exhibits, and other supporting schedules that detail an institution's safety and soundness, compliance with laws and regulations, and recommended solutions to questionable financial conditions.
- Train other examiners in the financial examination process.
- Provide regulatory compliance training to employees.
- Prepare reports on operations and system productivity or efficiency.
- Hire, train, evaluate, or discharge staff or resolve personnel grievances.
- Prepare and maintain production reports or personnel records.
- Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
- Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
- Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
- Review operations and confer with technical or administrative staff to resolve production or processing problems.
- Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports to detect production problems.
- Review plans and confer with research or support staff to develop new products or processes.
- Develop budgets or approve expenditures for supplies, materials, or human resources, ensuring that materials, labor, or equipment are used efficiently to meet production targets.
- Maintain current knowledge of the quality control field, relying on current literature pertaining to materials use, technological advances, or statistical studies.
- Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
- Initiate or coordinate inventory or cost control programs.
- Negotiate materials prices with suppliers.
- Conduct site audits to ensure adherence to safety and environmental regulations.
- Develop or enforce procedures for normal operation of manufacturing systems.
- Implement operational and emergency procedures.
- Maintain records to demonstrate compliance with safety and environmental laws, regulations, or policies.
- Monitor permit requirements for updates.
- Optimize operational costs and productivity consistent with safety and environmental rules and regulations.
- Supervise subordinate employees.
- Prepare reports on operations and system productivity or efficiency.
- Hire, train, evaluate, or discharge staff or resolve personnel grievances.
- Prepare and maintain production reports or personnel records.
- Analyze employment-related data and prepare required reports.
- Schedule or conduct new employee orientations.
- Provide management with information or training related to interviewing, performance appraisals, counseling techniques, or documentation of performance issues.
- Interpret and explain human resources policies, procedures, laws, standards, or regulations.
- Hire employees and process hiring-related paperwork.
- Maintain current knowledge of Equal Employment Opportunity (EEO) and affirmative action guidelines and laws, such as the Americans with Disabilities Act (ADA).
- Prepare or maintain employment records related to events, such as hiring, termination, leaves, transfers, or promotions, using human resources management system software.
- Address employee relations issues, such as harassment allegations, work complaints, or other employee concerns.
- Review employment applications and job orders to match applicants with job requirements.
- Inform job applicants of details such as duties and responsibilities, compensation, benefits, schedules, working conditions, or promotion opportunities.
- Select qualified job applicants or refer them to managers, making hiring recommendations when appropriate.
- Maintain and update human resources documents, such as organizational charts, employee handbooks or directories, or performance evaluation forms.
- Confer with management to develop or implement personnel policies or procedures.
- Contact job applicants to inform them of the status of their applications.
- Conduct exit interviews and ensure that necessary employment termination paperwork is completed.
- Interview job applicants to obtain information on work history, training, education, or job skills.
- Perform searches for qualified job candidates, using sources such as computer databases, networking, Internet recruiting resources, media advertisements, job fairs, recruiting firms, or employee referrals.
- Advise management on organizing, preparing, or implementing recruiting or retention programs.
- Develop or implement recruiting strategies to meet current or anticipated staffing needs.
- Administer employee benefit plans.
- Schedule or administer skill, intelligence, psychological, or drug tests for current or prospective employees.
- Conduct reference or background checks on job applicants.
- Review and evaluate applicant qualifications or eligibility for specified licensing, according to established guidelines and designated licensing codes.
- Evaluate recruitment or selection criteria to ensure conformance to professional, statistical, or testing standards, recommending revisions, as needed.
- Coordinate with outside staffing agencies to secure temporary employees, based on departmental needs.
- Evaluate selection or testing techniques by conducting research or follow-up activities and conferring with management or supervisory personnel.
- Analyze employment-related data and prepare required reports.
- Schedule or conduct new employee orientations.
- Provide management with information or training related to interviewing, performance appraisals, counseling techniques, or documentation of performance issues.
- Prepare progress or technical reports.
- Provide training and interpretation in the use of methods or procedures for observing and checking controls for geodetic and plane coordinates.
- Analyze control or survey data to ensure adherence to project specifications or land survey standards.
- Conduct surveys to determine exact positions, measurement of points, elevations, lines, areas, volumes, contours, or other features of land surfaces.
- Calculate the exact horizontal and vertical position of points on the Earth's surface.
- Maintain databases of geodetic and related information, including coordinate, descriptive, or quality assurance data.
- Verify the mathematical correctness of newly collected survey data.
- Compute horizontal and vertical coordinates of control networks, using direct leveling or other geodetic survey techniques, such as triangulation, trilateration, and traversing, to establish features of the Earth's surface.
- Plan or direct the work of geodetic surveying staff, providing technical consultation as needed.
- Assess the quality of control data to determine the need for additional survey data for engineering, construction, or other projects.
- Distribute compiled geodetic data to government agencies or the general public.
- Request additional survey data when field collection errors occur or engineering surveying specifications are not maintained.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in technology, equipment, or systems.
- Review existing standards, controls, or equipment used, recommending changes or upgrades as needed.
- Compute, retrace, or adjust existing surveys of features such as highway alignments, property boundaries, utilities, control and other surveys to match the ground elevation-dependent grids, geodetic grids, or property boundaries and to ensure accuracy and continuity of data used in engineering, surveying, or construction projects.
- Determine orientation of tracts of land, including position, boundaries, size, and shape, using theodolites, electronic distance-measuring equipment, satellite-based positioning equipment, land information systems, or other geodetic survey equipment.
- Prepare progress or technical reports.
- Provide training and interpretation in the use of methods or procedures for observing and checking controls for geodetic and plane coordinates.
- Produce documentation of the questionnaire development process, data collection methods, sampling designs, and decisions related to sample statistical weighting.
- Hire and train recruiters and data collectors.
- Review, classify, and record survey data in preparation for computer analysis.
- Prepare and present summaries and analyses of survey data, including tables, graphs, and fact sheets that describe survey techniques and results.
- Determine and specify details of survey projects, including sources of information, procedures to be used, and the design of survey instruments and materials.
- Consult with clients to identify survey needs and specific requirements, such as special samples.
- Conduct surveys and collect data, using methods such as interviews, questionnaires, focus groups, market analysis surveys, public opinion polls, literature reviews, and file reviews.
- Support, plan, and coordinate operations for single or multiple surveys.
- Conduct research to gather information about survey topics.
- Direct and review the work of staff members, including survey support staff and interviewers who gather survey data.
- Analyze data from surveys, old records, or case studies, using statistical software.
- Direct updates and changes in survey implementation and methods.
- Write proposals to win new projects.
- Collaborate with other researchers in the planning, implementation, and evaluation of surveys.
- Monitor and evaluate survey progress and performance, using sample disposition reports and response rate calculations.
- Write training manuals to be used by survey interviewers.
- Produce documentation of the questionnaire development process, data collection methods, sampling designs, and decisions related to sample statistical weighting.
- Hire and train recruiters and data collectors.
- Prepare schedules, reports, and estimates of the costs involved in developing and operating mines.
- Supervise, train, and evaluate technicians, technologists, survey personnel, engineers, scientists or other mine personnel.
- Prepare technical reports for use by mining, engineering, and management personnel.
- Inspect mining areas for unsafe structures, equipment, and working conditions.
- Select or develop mineral location, extraction, and production methods, based on factors such as safety, cost, and deposit characteristics.
- Select locations and plan underground or surface mining operations, specifying processes, labor usage, and equipment that will result in safe, economical, and environmentally sound extraction of minerals and ores.
- Monitor mine production rates to assess operational effectiveness.
- Examine maps, deposits, drilling locations, or mines to determine the location, size, accessibility, contents, value, and potential profitability of mineral, oil, and gas deposits.
- Design, implement, and monitor the development of mines, facilities, systems, or equipment.
- Test air to detect toxic gases and recommend measures to remove them, such as installation of ventilation shafts.
- Implement and coordinate mine safety programs, including the design and maintenance of protective and rescue equipment and safety devices.
- Devise solutions to problems of land reclamation and water and air pollution, such as methods of storing excavated soil and returning exhausted mine sites to natural states.
- Lay out, direct, and supervise mine construction operations, such as the construction of shafts and tunnels.
- Design, develop, and implement computer applications for use in mining operations such as mine design, modeling, or mapping or for monitoring mine conditions.
- Select or devise materials-handling methods and equipment to transport ore, waste materials, and mineral products efficiently and economically.
- Evaluate data to develop new mining products, equipment, or processes.
- Design mining and mineral treatment equipment and machinery in collaboration with other engineering specialists.
- Conduct or direct mining experiments to test or prove research findings.
- Prepare schedules, reports, and estimates of the costs involved in developing and operating mines.
- Supervise, train, and evaluate technicians, technologists, survey personnel, engineers, scientists or other mine personnel.
- Prepare reports describing contamination tests, material or equipment decontaminated, or methods used in decontamination processes.
- Instruct personnel in radiation safety procedures and demonstrate use of protective clothing and equipment.
- Brief workers on radiation levels in work areas.
- Calculate safe radiation exposure times for personnel using plant contamination readings and prescribed safe levels of radiation.
- Monitor personnel to determine the amounts and intensities of radiation exposure.
- Inform supervisors when individual exposures or area radiation levels approach maximum permissible limits.
- Determine intensities and types of radiation in work areas, equipment, or materials, using radiation detectors or other instruments.
- Collect samples of air, water, gases, or solids to determine radioactivity levels of contamination.
- Analyze samples, such as air or water samples, for contaminants or other elements.
- Determine or recommend radioactive decontamination procedures, according to the size and nature of equipment and the degree of contamination.
- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
- Decontaminate objects by cleaning with soap or solvents or by abrading with wire brushes, buffing wheels, or sandblasting machines.
- Enter data into computers to record characteristics of nuclear events or to locate coordinates of particles.
- Calibrate and maintain chemical instrumentation sensing elements and sampling system equipment, using calibration instruments and hand tools.
- Immerse samples in chemical compounds to prepare them for testing.
- Confer with scientists directing projects to determine significant events to monitor during tests.
- Operate manipulators from outside cells to move specimens into or out of shielded containers, to remove specimens from cells, or to place specimens on benches or equipment work stations.
- Provide initial response to abnormal events or to alarms from radiation monitoring equipment.
- Place radioactive waste, such as sweepings or broken sample bottles, into containers for shipping or disposal.
- Prepare reports describing contamination tests, material or equipment decontaminated, or methods used in decontamination processes.
- Instruct personnel in radiation safety procedures and demonstrate use of protective clothing and equipment.
- Prepare reports summarizing operational results, financial performance, or accomplishments of specified objectives, goals, or plans.
- Create or administer training and awareness presentations or materials.
- Develop emergency management plans for recovery decision making and communications, continuity of critical departmental processes, or temporary shut-down of non-critical departments to ensure continuity of operation and governance.
- Develop disaster recovery plans for physical locations with critical assets, such as data centers.
- Test documented disaster recovery strategies and plans.
- Analyze impact on, and risk to, essential business functions or information systems to identify acceptable recovery time periods and resource requirements.
- Write reports to summarize testing activities, including descriptions of goals, planning, scheduling, execution, results, analysis, conclusions, and recommendations.
- Review existing disaster recovery, crisis management, or business continuity plans.
- Create scenarios to reestablish operations from various types of business disruptions.
- Establish, maintain, or test call trees to ensure appropriate communication during disaster.
- Conduct or oversee contingency plan integration and operation.
- Identify opportunities for strategic improvement or mitigation of business interruption and other risks caused by business, regulatory, or industry-specific change initiatives.
- Interpret government regulations and applicable codes to ensure compliance.
- Attend professional meetings, read literature, and participate in training or other educational offerings to keep abreast of new developments and technologies related to disaster recovery and business continuity.
- Recommend or implement methods to monitor, evaluate, or enable resolution of safety, operations, or compliance interruptions.
- Create business continuity and disaster recovery budgets.
- Maintain and update organization information technology applications and network systems blueprints.
- Design or implement products and services to mitigate risk or facilitate use of technology-based tools and methods.
- Analyze corporate intelligence data to identify trends, patterns, or warnings indicating threats to security of people, assets, information, or infrastructure.
- Conduct or oversee collection of corporate intelligence to avoid fraud, financial crime, cyber attack, terrorism, and infrastructure failure.
- Identify individual or transaction targets to direct intelligence collection.
- Prepare reports summarizing operational results, financial performance, or accomplishments of specified objectives, goals, or plans.
- Create or administer training and awareness presentations or materials.
- Perform managerial functions, such as preparing proposals and budgets, analyzing labor costs, and writing reports.
- Conduct training sessions on new material products, applications, or manufacturing methods for customers and their employees.
- Analyze product failure data and laboratory test results to determine causes of problems and develop solutions.
- Design and direct the testing or control of processing procedures.
- Monitor material performance, and evaluate its deterioration.
- Conduct or supervise tests on raw materials or finished products to ensure their quality.
- Evaluate technical specifications and economic factors relating to process or product design objectives.
- Modify properties of metal alloys, using thermal and mechanical treatments.
- Determine appropriate methods for fabricating and joining materials.
- Guide technical staff in developing materials for specific uses in projected products or devices.
- Review new product plans, and make recommendations for material selection, based on design objectives such as strength, weight, heat resistance, electrical conductivity, and cost.
- Supervise the work of technologists, technicians, and other engineers and scientists.
- Plan and implement laboratory operations to develop material and fabrication procedures that meet cost, product specification, and performance standards.
- Plan and evaluate new projects, consulting with other engineers and corporate executives, as necessary.
- Supervise production and testing processes in industrial settings, such as metal refining facilities, smelting or foundry operations, or nonmetallic materials production operations.
- Solve problems in a number of engineering fields, such as mechanical, chemical, electrical, civil, nuclear, and aerospace.
- Present technical information at conferences.
- Replicate the characteristics of materials and their components, using computers.
- Design processing plants and equipment.
- Write for technical magazines, journals, and trade association publications.
- Teach in colleges and universities.
- Perform managerial functions, such as preparing proposals and budgets, analyzing labor costs, and writing reports.
- Conduct training sessions on new material products, applications, or manufacturing methods for customers and their employees.
- Compile data and write reports regarding existing or potential electrical engineering studies or projects.
- Supervise or train project team members, as necessary.
- Design, implement, maintain, or improve electrical instruments, equipment, facilities, components, products, or systems for commercial, industrial, or domestic purposes.
- Oversee project production efforts to assure projects are completed on time and within budget.
- Direct or coordinate manufacturing, construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, codes, or customer requirements.
- Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications.
- Operate computer-assisted engineering or design software or equipment to perform engineering tasks.
- Confer with engineers, customers, or others to discuss existing or potential engineering projects or products.
- Investigate or test vendors' or competitors' products.
- Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational, safety, or environmental standards.
- Investigate customer or public complaints to determine the nature and extent of problems.
- Prepare technical drawings, specifications of electrical systems, or topographical maps to ensure that installation and operations conform to standards and customer requirements.
- Prepare specifications for purchases of materials or equipment.
- Estimate labor, material, or construction costs for budget preparation purposes.
- Plan or implement research methodology or procedures to apply principles of electrical theory to engineering projects.
- Assist in developing capital project programs for new equipment or major repairs.
- Develop systems that produce electricity with renewable energy sources, such as wind, solar, or biofuels.
- Develop software to control electrical systems.
- Plan layout of electric power generating plants or distribution lines or stations.
- Integrate electrical systems with renewable energy systems to improve overall efficiency.
- Conduct field surveys or study maps, graphs, diagrams, or other data to identify and correct power system problems.
- Design electrical systems or components that minimize electric energy requirements, such as lighting systems designed to account for natural lighting.
- Collect data relating to commercial or residential development, population, or power system interconnection to determine operating efficiency of electrical systems.
- Compile data and write reports regarding existing or potential electrical engineering studies or projects.
- Supervise or train project team members, as necessary.
- Prepare reports, such as organization and flow charts and career path reports, to summarize job analysis and evaluation and compensation analysis information.
- Plan and develop curricula and materials for training programs and conduct training.
- Evaluate job positions, determining classification, exempt or non-exempt status, and salary.
- Ensure company compliance with federal and state laws, including reporting requirements.
- Prepare occupational classifications, job descriptions, and salary scales.
- Provide advice on the resolution of classification and salary complaints.
- Research job and worker requirements, structural and functional relationships among jobs and occupations, and occupational trends.
- Advise managers and employees on state and federal employment regulations, collective agreements, benefit and compensation policies, personnel procedures, and classification programs.
- Perform multifactor data and cost analyses that may be used in areas such as support of collective bargaining agreements.
- Plan, develop, evaluate, improve, and communicate methods and techniques for selecting, promoting, compensating, evaluating, and training workers.
- Assess need for and develop job analysis instruments and materials.
- Consult with, or serve as, technical liaison between business, industry, government, and union officials.
- Observe, interview, and survey employees and conduct focus group meetings to collect job, organizational, and occupational information.
- Assist in preparing and maintaining personnel records and handbooks.
- Analyze organizational, occupational, and industrial data to facilitate organizational functions and provide technical information to business, industry, and government.
- Administer employee insurance, pension, and savings plans, working with insurance brokers and plan carriers.
- Research employee benefit and health and safety practices, and recommend changes or modifications to existing policies.
- Develop, implement, administer, and evaluate personnel and labor relations programs, including performance appraisal, affirmative action, and employment equity programs.
- Advise staff of individuals' qualifications.
- Negotiate collective agreements on behalf of employers or workers, and mediate labor disputes and grievances.
- Review occupational data on Alien Employment Certification Applications to determine the appropriate occupational title and code, and provide local offices with information about immigration and occupations.
- Work with the Department of Labor and promote its use with employers.
- Prepare research results for publication in form of journals, books, manuals, and film.
- Speak at conferences and events to promote apprenticeships and related training programs.
- Prepare reports, such as organization and flow charts and career path reports, to summarize job analysis and evaluation and compensation analysis information.
- Plan and develop curricula and materials for training programs and conduct training.
- Prepare reports summarizing information or trends related to manufacturing performance.
- Train production personnel in new or existing methods.
- Troubleshoot new or existing product problems involving designs, materials, or processes.
- Investigate or resolve operational problems, such as material use variances or bottlenecks.
- Identify opportunities or implement changes to improve manufacturing processes or products or to reduce costs, using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.
- Apply continuous improvement methods, such as lean manufacturing, to enhance manufacturing quality, reliability, or cost-effectiveness.
- Provide technical expertise or support related to manufacturing.
- Incorporate new manufacturing methods or processes to improve existing operations.
- Review product designs for manufacturability or completeness.
- Determine root causes of failures or recommend changes in designs, tolerances, or processing methods, using statistical procedures.
- Prepare documentation for new manufacturing processes or engineering procedures.
- Design layout of equipment or workspaces to achieve maximum efficiency.
- Communicate manufacturing capabilities, production schedules, or other information to facilitate production processes.
- Supervise technicians, technologists, analysts, administrative staff, or other engineers.
- Design, install, or troubleshoot manufacturing equipment.
- Evaluate manufactured products according to specifications and quality standards.
- Estimate costs, production times, or staffing requirements for new designs.
- Design tests of finished products or process capabilities to establish standards or validate process requirements.
- Analyze the financial impacts of sustainable manufacturing processes or sustainable product manufacturing.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Purchase equipment, materials, or parts.
- Evaluate current or proposed manufacturing processes or practices for environmental sustainability, considering factors such as greenhouse gas emissions, air pollution, water pollution, energy use, or waste creation.
- Read current literature, talk with colleagues, participate in educational programs, attend meetings or workshops, or participate in professional organizations or conferences to keep abreast of developments in the manufacturing field.
- Redesign packaging for manufactured products to minimize raw material use or waste.
- Prepare reports summarizing information or trends related to manufacturing performance.
- Train production personnel in new or existing methods.
- Write technical reports or documentation, such as deviation reports, testing protocols, and trend analyses.
- Train other analysts to perform laboratory procedures and assays.
- Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples.
- Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release.
- Calibrate, validate, or maintain laboratory equipment.
- Ensure that lab cleanliness and safety standards are maintained.
- Perform visual inspections of finished products.
- Complete documentation needed to support testing procedures, including data capture forms, equipment logbooks, or inventory forms.
- Compile laboratory test data and perform appropriate analyses.
- Identify and troubleshoot equipment problems.
- Investigate or report questionable test results.
- Monitor testing procedures to ensure that all tests are performed according to established item specifications, standard test methods, or protocols.
- Identify quality problems and recommend solutions.
- Participate in out-of-specification and failure investigations and recommend corrective actions.
- Receive and inspect raw materials.
- Supply quality control data necessary for regulatory submissions.
- Serve as a technical liaison between quality control and other departments, vendors, or contractors.
- Write or revise standard quality control operating procedures.
- Participate in internal assessments and audits as required.
- Perform validations or transfers of analytical methods in accordance with applicable policies or guidelines.
- Evaluate analytical methods and procedures to determine how they might be improved.
- Prepare or review required method transfer documentation including technical transfer protocols or reports.
- Review data from contract laboratories to ensure accuracy and regulatory compliance.
- Develop and qualify new testing methods.
- Coordinate testing with contract laboratories and vendors.
- Evaluate new technologies and methods to make recommendations regarding their use.
- Write technical reports or documentation, such as deviation reports, testing protocols, and trend analyses.
- Train other analysts to perform laboratory procedures and assays.
- Develop proposed project objectives and targets and report to management on progress in attaining them.
- Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.
- Provide technical support for environmental remediation or litigation projects, including remediation system design or determination of regulatory applicability.
- Collaborate with environmental scientists, planners, hazardous waste technicians, engineers, experts in law or business, or other specialists to address environmental problems.
- Assess the existing or potential environmental impact of land use projects on air, water, or land.
- Advise corporations or government agencies of procedures to follow in cleaning up contaminated sites to protect people and the environment.
- Inspect industrial or municipal facilities or programs to evaluate operational effectiveness or ensure compliance with environmental regulations.
- Design, or supervise the design of, systems, processes, or equipment for control, management, or remediation of water, air, or soil quality.
- Direct installation or operation of environmental monitoring devices or supervise related data collection programs.
- Prepare, review, or update environmental investigation or recommendation reports.
- Develop site-specific health and safety protocols, such as spill contingency plans or methods for loading or transporting waste.
- Obtain, update, or maintain plans, permits, or standard operating procedures.
- Prepare or present public briefings on the status of environmental engineering projects.
- Coordinate or manage environmental protection programs or projects, assigning or evaluating work.
- Request bids from suppliers or consultants.
- Monitor progress of environmental improvement programs.
- Serve as liaison with federal, state, or local agencies or officials on issues pertaining to solid or hazardous waste program requirements.
- Provide assistance with planning, quality assurance, safety inspection protocols, or sampling as part of a team conducting multimedia inspections at complex facilities.
- Develop, implement, or manage plans or programs related to conservation or management of natural resources.
- Inform company employees or other interested parties of environmental issues.
- Advise industries or government agencies about environmental policies and standards.
- Provide environmental engineering assistance in network analysis, regulatory analysis, or planning or reviewing database development.
- Assist in budget implementation, forecasts, or administration.
- Prepare, maintain, or revise quality assurance documentation or procedures.
- Prepare hazardous waste manifests or land disposal restriction notifications.
- Develop or present environmental compliance training or orientation sessions.
- Assess, sort, characterize, or pack known or unknown materials.
- Write reports or articles for Web sites or newsletters related to environmental engineering issues.
- Develop proposed project objectives and targets and report to management on progress in attaining them.
- Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.
- Prepare production documents, such as standard operating procedures, manufacturing batch records, inventory reports, or productivity reports.
- Provide advice or training to other technicians.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
- Analyze, estimate, or report production costs.
- Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures.
- Calibrate or adjust equipment to ensure quality production, using tools such as calipers, micrometers, height gauges, protractors, or ring gauges.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Coordinate equipment purchases, installations, or transfers.
- Create or interpret engineering drawings, schematic diagrams, formulas, or blueprints for management or engineering staff.
- Design plant layouts or production facilities.
- Develop manufacturing infrastructure to integrate or deploy new manufacturing processes.
- Develop or implement programs to address problems related to production, materials, safety, or quality.
- Develop production, inventory, or quality assurance programs.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Identify opportunities for improvements in quality, cost, or efficiency of automation equipment.
- Monitor and adjust production processes or equipment for quality and productivity.
- Oversee equipment start-up, characterization, qualification, or release.
- Oversee or inspect production processes.
- Prepare layouts, drawings, or sketches of machinery or equipment, such as shop tooling, scale layouts, or new equipment design, using drafting equipment or computer-aided design (CAD) software.
- Recommend corrective or preventive actions to assure or improve product quality or reliability.
- Select cleaning materials, tools, or equipment.
- Select material quantities or processing methods needed to achieve efficient production.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
- Prepare production documents, such as standard operating procedures, manufacturing batch records, inventory reports, or productivity reports.
- Provide advice or training to other technicians.
- Prepare estimate of production costs and production progress reports for management.
- Monitor and analyze data from processes and experiments.
- Develop processes to separate components of liquids or gases or generate electrical currents, using controlled chemical processes.
- Troubleshoot problems with chemical manufacturing processes.
- Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
- Conduct research to develop new and improved chemical manufacturing processes.
- Perform laboratory studies of steps in manufacture of new products and test proposed processes in small-scale operation, such as a pilot plant.
- Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
- Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
- Direct activities of workers who operate or are engaged in constructing and improving absorption, evaporation, or electromagnetic equipment.
- Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
- Design and plan layout of equipment.
- Develop safety procedures to be employed by workers operating equipment or working in close proximity to ongoing chemical reactions.
- Prepare estimate of production costs and production progress reports for management.
- Train or supervise others in laying pipe.
- Install or use instruments such as lasers, grade rods, or transit levels.
- Cut pipes to required lengths.
- Connect pipe pieces and seal joints, using welding equipment, cement, or glue.
- Cover pipes with earth or other materials.
- Install or repair sanitary or stormwater sewer structures or pipe systems.
- Align and position pipes to prepare them for welding or sealing.
- Check slopes for conformance to requirements, using levels or lasers.
- Lay out pipe routes, following written instructions or blueprints and coordinating layouts with supervisors.
- Operate mechanized equipment, such as pickup trucks, rollers, tandem dump trucks, front-end loaders, or backhoes.
- Grade or level trench bases, using tamping machines or hand tools.
- Dig trenches to desired or required depths, by hand or using trenching tools.
- Tap and drill holes into pipes to introduce auxiliary lines or devices.
- Locate existing pipes needing repair or replacement, using magnetic or radio indicators.
- Train or supervise others in laying pipe.
- Develop reports or presentations to communicate the effectiveness of sustainability initiatives.
- Develop sustainability project goals, objectives, initiatives, or strategies in collaboration with other sustainability professionals.
- Monitor or track sustainability indicators, such as energy usage, natural resource usage, waste generation, and recycling.
- Assess or propose sustainability initiatives, considering factors such as cost effectiveness, technical feasibility, and acceptance.
- Provide technical or administrative support for sustainability programs or issues.
- Review and revise sustainability proposals or policies.
- Create or maintain plans or other documents related to sustainability projects.
- Collect information about waste stream management or green building practices to inform decision makers.
- Research or review regulatory, technical, or market issues related to sustainability.
- Identify or investigate violations of natural resources, waste management, recycling, or other environmental policies.
- Identify or create new sustainability indicators.
- Create marketing or outreach media, such as brochures or Web sites, to communicate sustainability issues, procedures, or objectives.
- Identify or procure needed resources to implement sustainability programs or projects.
- Write grant applications, rebate applications, or project proposals to secure funding for sustainability projects.
- Develop reports or presentations to communicate the effectiveness of sustainability initiatives.
- Prepare reports and document project activities and data.
- Calculate dimensions, square footage, profile and component specifications, and material quantities, using calculator or computer.
- Read and review project blueprints and structural specifications to determine dimensions of structure or system and material requirements.
- Draft detailed dimensional drawings and design layouts for projects to ensure conformance to specifications.
- Confer with supervisor to determine project details such as plan preparation, acceptance testing, and evaluation of field conditions.
- Analyze proposed site factors and design maps, graphs, tracings, and diagrams to illustrate findings.
- Report maintenance problems occurring at project site to supervisor and negotiate changes to resolve system conflicts.
- Inspect project site and evaluate contractor work to detect design malfunctions and ensure conformance to design specifications and applicable codes.
- Conduct materials test and analysis, using tools and equipment and applying engineering knowledge.
- Develop plans and estimate costs for installation of systems, utilization of facilities, or construction of structures.
- Develop project budgets by estimating the cost of project activities.
- Evaluate facility to determine suitability for occupancy and square footage availability.
- Plan and conduct field surveys to locate new sites and analyze details of project sites.
- Negotiate with contractors on prices for new contracts or modifications to existing contracts.
- Respond to public suggestions and complaints.
- Prepare reports and document project activities and data.
- Train workers in construction methods, operation of equipment, safety procedures, or company policies.
- Inspect work progress, equipment, or construction sites to verify safety or to ensure that specifications are met.
- Read specifications, such as blueprints, to determine construction requirements or to plan procedures.
- Supervise, coordinate, or schedule the activities of construction or extractive workers.
- Assign work to employees, based on material or worker requirements of specific jobs.
- Coordinate work activities with other construction project activities.
- Estimate material or worker requirements to complete jobs.
- Analyze worker or production problems and recommend solutions, such as improving production methods or implementing motivational plans.
- Order or requisition materials or supplies.
- Locate, measure, and mark site locations or placement of structures or equipment, using measuring and marking equipment.
- Confer with managerial or technical personnel, other departments, or contractors to resolve problems or to coordinate activities.
- Arrange for repairs of equipment or machinery.
- Provide assistance to workers engaged in construction or extraction activities, using hand tools or other equipment.
- Record information, such as personnel, production, or operational data on specified forms or reports.
- Suggest or initiate personnel actions, such as promotions, transfers, or hires.
- Train workers in construction methods, operation of equipment, safety procedures, or company policies.
- Train, direct, or supervise other construction inspectors.
- Monitor installation of plumbing, wiring, equipment, or appliances to ensure that installation is performed properly and is in compliance with applicable regulations.
- Approve building plans that meet required specifications.
- Inspect and monitor construction sites to ensure adherence to safety standards, building codes, or specifications.
- Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, or foundations during and after construction for structural quality, general safety, or conformance to specifications and codes.
- Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations.
- Maintain daily logs and supplement inspection records with photographs.
- Conduct inspections, using survey instruments, metering devices, tape measures, or test equipment.
- Measure dimensions and verify level, alignment, or elevation of structures or fixtures to ensure compliance to building plans and codes.
- Confer with owners, violators, or authorities to explain regulations or recommend remedial actions.
- Issue permits for construction, relocation, demolition, or occupancy.
- Conduct environmental hazard inspections to identify or quantify problems, such as asbestos, poor air quality, water contamination, or other environmental hazards.
- Evaluate premises for cleanliness, such as proper garbage disposal or lack of vermin infestation.
- Monitor construction activities to ensure that environmental regulations are not violated.
- Evaluate project details to ensure adherence to environmental regulations.
- Estimate cost of completed work or of needed renovations or upgrades.
- Examine lifting or conveying devices, such as elevators, escalators, moving sidewalks, hoists, inclined railways, ski lifts, or amusement rides to ensure safety and proper functioning.
- Sample and test air to identify gasses, such as bromine, ozone, or sulfur dioxide, or particulates, such as mold, dust, or allergens.
- Inspect facilities or installations to determine their environmental impact.
- Train, direct, or supervise other construction inspectors.
- Prepare reports of services rendered, tools used, or time required, for billing purposes.
- Maintain and perform safety inspections on equipment and tools.
- Operate controls that raise derricks or level rigs.
- Listen to engines, rotary chains, or other equipment to detect faulty operations or unusual well conditions.
- Install pressure-control devices onto wellheads.
- Confer with others to gather information regarding pipe or tool sizes or borehole conditions in wells.
- Operate pumps that circulate water, oil, or other fluids through wells to remove sand or other materials obstructing the free flow of oil.
- Drive truck-mounted units to well sites.
- Interpret instrument readings to ascertain the depth of obstruction.
- Thread cables through derrick pulleys, using hand tools.
- Select fishing methods or tools for removing obstacles such as liners, broken casing, screens, or drill pipe.
- Close and seal wells no longer in use.
- Direct drilling crews performing activities such as assembling and connecting pipe, applying weights to drill pipes, or drilling around lodged obstacles.
- Apply green technologies or techniques, such as the use of coiled tubing, slim-hole drilling, horizontal drilling, hydraulic fracturing, or gas lift systems.
- Operate specialized equipment to remove obstructions by backing off or severing pipes by chemical or explosive action.
- Perforate well casings or sidewalls of boreholes with explosive charges.
- Examine unserviceable wells to determine actions to be taken to improve well conditions.
- Monitor sound wave-generating or detecting mechanisms to determine well fluid levels.
- Insert detection instruments into wells with obstructions.
- Prepare reports of services rendered, tools used, or time required, for billing purposes.
- Check that safety regulations and building codes are met, and complete service reports verifying conformance to standards.
- Inspect wiring connections, control panel hookups, door installations, and alignments and clearances of cars and hoistways to ensure that equipment will operate properly.
- Assemble, install, repair, and maintain elevators, escalators, moving sidewalks, and dumbwaiters, using hand and power tools, and testing devices such as test lamps, ammeters, and voltmeters.
- Disassemble defective units, and repair or replace parts such as locks, gears, cables, and electric wiring.
- Locate malfunctions in brakes, motors, switches, and signal and control systems, using test equipment.
- Adjust safety controls, counterweights, door mechanisms, and components such as valves, ratchets, seals, and brake linings.
- Read and interpret blueprints to determine the layout of system components, frameworks, and foundations, and to select installation equipment.
- Connect car frames to counterweights, using steel cables.
- Maintain log books that detail all repairs and checks performed.
- Connect electrical wiring to control panels and electric motors.
- Test newly installed equipment to ensure that it meets specifications, such as stopping at floors for set amounts of time.
- Participate in additional training to keep skills up to date.
- Operate elevators to determine power demands, and test power consumption to detect overload factors.
- Install electrical wires and controls by attaching conduit along shaft walls from floor to floor and pulling plastic-covered wires through the conduit.
- Attach guide shoes and rollers to minimize the lateral motion of cars as they travel through shafts.
- Install outer doors and door frames at elevator entrances on each floor of a structure.
- Assemble elevator cars, installing each car's platform, walls, and doors.
- Bolt or weld steel rails to the walls of shafts to guide elevators, working from scaffolding or platforms.
- Assemble electrically powered stairs, steel frameworks, and tracks, and install associated motors and electrical wiring.
- Cut prefabricated sections of framework, rails, and other components to specified dimensions.
- Check that safety regulations and building codes are met, and complete service reports verifying conformance to standards.
- Complete production reports, purchase orders, and material, tool, and equipment lists.
- Estimate production costs, cost saving methods, and the effects of product design changes on expenditures for management review, action, and control.
- Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
- Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product.
- Confer with clients, vendors, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status.
- Communicate with management and user personnel to develop production and design standards.
- Evaluate precision and accuracy of production and testing equipment and engineering drawings to formulate corrective action plan.
- Recommend methods for improving utilization of personnel, material, and utilities.
- Record or oversee recording of information to ensure currency of engineering drawings and documentation of production problems.
- Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer.
- Direct workers engaged in product measurement, inspection, and testing activities to ensure quality control and reliability.
- Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization.
- Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities.
- Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs.
- Implement methods and procedures for disposition of discrepant material and defective or damaged parts, and assess cost and responsibility.
- Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
- Study operations sequence, material flow, functional statements, organization charts, and project information to determine worker functions and responsibilities.
- Formulate sampling procedures and designs and develop forms and instructions for recording, evaluating, and reporting quality and reliability data.
- Regulate and alter workflow schedules according to established manufacturing sequences and lead times to expedite production operations.
- Schedule deliveries based on production forecasts, material substitutions, storage and handling facilities, and maintenance requirements.
- Complete production reports, purchase orders, and material, tool, and equipment lists.
- Prepare or assist in the preparation of bids, contracts, or written reports related to weatherization work.
- Test combustible appliances, such as gas appliances.
- Determine amount of air leakage in buildings, using a blower door machine.
- Test and diagnose air flow systems, using furnace efficiency analysis equipment.
- Install and seal air ducts, combustion air openings, or ventilation openings to improve heating and cooling efficiency.
- Inspect buildings to identify required weatherization measures, including repair work, modification, or replacement.
- Recommend weatherization techniques to clients in accordance with needs and applicable energy regulations, codes, policies, or statutes.
- Apply insulation materials, such as loose, blanket, board, and foam insulation to attics, crawl spaces, basements, or walls.
- Make minor repairs using basic hand or power tools and materials, such as glass, lumber, and drywall.
- Prepare cost estimates or specifications for rehabilitation or weatherization services.
- Contact residents or building owners to schedule appointments.
- Wrap air ducts and water lines with insulating materials, such as duct wrap and pipe insulation.
- Prepare and apply weather-stripping, glazing, caulking, or door sweeps to reduce energy losses.
- Clean and maintain tools and equipment.
- Apply spackling, compounding, or other materials to repair holes in walls.
- Explain recommendations, policies, procedures, requirements, or other related information to residents or building owners.
- Maintain activity logs, financial transaction logs, or other records of weatherization work performed.
- Explain energy conservation measures, such as the use of low flow showerheads and energy-efficient lighting.
- Install storm windows or storm doors and verify proper fit.
- Wrap water heaters with water heater blankets.
- Prepare or assist in the preparation of bids, contracts, or written reports related to weatherization work.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Determine project material or equipment needs.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Research or develop electronics technologies for use in electric-drive vehicles.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Prepare reports to communicate information such as contamination test results, decontamination results, or decontamination procedures.
- Follow nuclear equipment operational policies and procedures that ensure environmental safety.
- Conduct surveillance testing to determine safety of nuclear equipment.
- Monitor nuclear reactor equipment performance to identify operational inefficiencies, hazards, or needs for maintenance or repair.
- Test plant equipment to ensure it is operating properly.
- Apply safety tags to equipment needing maintenance.
- Follow policies and procedures for radiation workers to ensure personnel safety.
- Modify, devise, or maintain nuclear equipment used in operations.
- Monitor instruments, gauges, or recording devices under direction of nuclear experimenters.
- Perform testing, maintenance, repair, or upgrading of accelerator systems.
- Adjust controls of equipment to control particle beam movement, pulse rates, energy or intensity, or radiation, according to specifications.
- Warn maintenance workers of radiation hazards and direct workers to vacate hazardous areas.
- Calculate equipment operating factors, such as radiation times, dosages, temperatures, gamma intensities, or pressures, using standard formulas and conversion tables.
- Measure the intensity and identify the types of radiation in work areas, equipment, or materials, using radiation detectors or other instruments.
- Communicate with accelerator maintenance personnel to ensure readiness of support systems, such as vacuum, water cooling, or radio frequency power sources.
- Set control panel switches to route electric power from sources and direct particle beams through injector units.
- Identify and implement appropriate decontamination procedures, based on equipment and the size, nature, and type of contamination.
- Decontaminate objects by cleaning them using soap or solvents or by abrading using brushes, buffing machines, or sandblasting machines.
- Collect air, water, gas or solid samples for testing to determine radioactivity levels or to ensure appropriate radioactive containment.
- Determine or recommend radioactive decontamination procedures, according to the size and nature of equipment and the degree of contamination.
- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
- Prepare reports to communicate information such as contamination test results, decontamination results, or decontamination procedures.
- Prepare reports in graphical or tabular form, summarizing field productivity or profitability.
- Document and maintain records of precision agriculture information.
- Collect information about soil or field attributes, yield data, or field boundaries, using field data recorders and basic geographic information systems (GIS).
- Use geospatial technology to develop soil sampling grids or identify sampling sites for testing characteristics such as nitrogen, phosphorus, or potassium content, pH, or micronutrients.
- Install, calibrate, or maintain sensors, mechanical controls, GPS-based vehicle guidance systems, or computer settings.
- Create, layer, and analyze maps showing precision agricultural data, such as crop yields, soil characteristics, input applications, terrain, drainage patterns, or field management history.
- Compare crop yield maps with maps of soil test data, chemical application patterns, or other information to develop site-specific crop management plans.
- Analyze geospatial data to determine agricultural implications of factors such as soil quality, terrain, field productivity, fertilizers, or weather conditions.
- Identify spatial coordinates, using remote sensing and Global Positioning System (GPS) data.
- Analyze data from harvester monitors to develop yield maps.
- Apply precision agriculture information to specifically reduce the negative environmental impacts of farming practices.
- Demonstrate the applications of geospatial technology, such as Global Positioning System (GPS), geographic information systems (GIS), automatic tractor guidance systems, variable rate chemical input applicators, surveying equipment, or computer mapping software.
- Draw or read maps, such as soil, contour, or plat maps.
- Provide advice on the development or application of better boom-spray technology to limit the overapplication of chemicals and to reduce the migration of chemicals beyond the fields being treated.
- Program farm equipment, such as variable-rate planting equipment or pesticide sprayers, based on input from crop scouting and analysis of field condition variability.
- Participate in efforts to advance precision agriculture technology, such as developing advanced weed identification or automated spot spraying systems.
- Analyze remote sensing imagery to identify relationships between soil quality, crop canopy densities, light reflectance, and weather history.
- Advise farmers on upgrading Global Positioning System (GPS) equipment to take advantage of newly installed advanced satellite technology.
- Identify areas in need of pesticide treatment by analyzing geospatial data to determine insect movement and damage patterns.
- Divide agricultural fields into georeferenced zones, based on soil characteristics and production potentials.
- Recommend best crop varieties or seeding rates for specific field areas, based on analysis of geospatial data.
- Contact equipment manufacturers for technical assistance, as needed.
- Prepare reports in graphical or tabular form, summarizing field productivity or profitability.
- Train crews, and introduce procedures to make drill work more safe and effective.
- Observe pressure gauge and move throttles and levers to control the speed of rotary tables, and to regulate pressure of tools at bottoms of boreholes.
- Count sections of drill rod to determine depths of boreholes.
- Push levers and brake pedals to control gasoline, diesel, electric, or steam draw works that lower and raise drill pipes and casings in and out of wells.
- Connect sections of drill pipe, using hand tools and powered wrenches and tongs.
- Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered, and time required.
- Maintain and adjust machinery to ensure proper performance.
- Start and examine operation of slush pumps to ensure circulation and consistency of drilling fluid or mud in well.
- Locate and recover lost or broken bits, casings, and drill pipes from wells, using special tools.
- Weigh clay, and mix with water and chemicals to make drilling mud.
- Direct rig crews in drilling and other activities, such as setting up rigs and completing or servicing wells.
- Monitor progress of drilling operations, and select and change drill bits according to the nature of strata, using hand tools.
- Repair or replace defective parts of machinery, such as rotary drill rigs, water trucks, air compressors, and pumps, using hand tools.
- Clean and oil pulleys, blocks, and cables.
- Bolt together pump and engine parts, and connect tanks and flow lines.
- Remove core samples during drilling to determine the nature of the strata being drilled.
- Cap wells with packers, or turn valves, to regulate outflow of oil from wells.
- Line drilled holes with pipes, and install all necessary hardware, to prepare new wells.
- Position and prepare truck-mounted derricks at drilling areas specified on field maps.
- Plug observation wells, and restore sites.
- Lower and explode charges in boreholes to start flow of oil from wells.
- Dig holes, set forms, and mix and pour concrete, for foundations of steel or wooden derricks.
- Train crews, and introduce procedures to make drill work more safe and effective.
- Hire, train, or supervise new employees or apprentices.
- Maintain equipment, making repairs or modifications when necessary.
- Fabricate ducts for high efficiency heating, ventilating, and air conditioning (HVAC) systems to maximize efficiency of systems.
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
- Transport prefabricated parts to construction sites for assembly and installation.
- Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, or downspouts in supportive frameworks.
- Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, using calculators, scribes, dividers, squares, or rulers.
- Fabricate or alter parts at construction sites, using shears, hammers, punches, or drills.
- Determine project requirements, such as scope, assembly sequences, or required methods or materials, using blueprints, drawings, or written or verbal instructions.
- Maneuver completed roofing units into position for installation.
- Select gauges or types of sheet metal or nonmetallic material, according to product specifications.
- Shape metal material over anvils, blocks, or other forms, using hand tools.
- Trim, file, grind, deburr, buff, or smooth surfaces, seams, or joints of assembled parts, using hand tools or portable power tools.
- Inspect individual parts, assemblies, or installations, using measuring instruments, such as calipers, scales, or micrometers.
- Develop or lay out patterns, using computerized metalworking equipment.
- Convert blueprints into shop drawings to be followed in the construction or assembly of sheet metal products.
- Perform sheet metal work necessary for solar panel installations.
- Verify that heating, ventilating, and air conditioning (HVAC) systems are designed, installed, and calibrated in accordance with green certification standards, such as those of Leadership in Energy and Environmental Design (LEED).
- Secure metal roof panels in place by interlocking and fastening grooved panel edges.
- Perform building commissioning activities by completing mechanical inspections of a building's water, lighting, or heating, ventilating, and air conditioning (HVAC) systems.
- Fasten roof panel edges or machine-made moldings to structures by nailing or welding.
- Finish parts, using hacksaws or hand, rotary, or squaring shears.
- Hire, train, or supervise new employees or apprentices.
- Document robotic application development, maintenance, or changes.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Evaluate robotic systems or prototypes.
- Install, calibrate, operate, or maintain robots.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Document robotic application development, maintenance, or changes.
- Prepare or present technical or project status reports.
- Conduct or direct system-level automotive testing.
- Provide technical direction to other engineers or engineering support personnel.
- Perform failure, variation, or root cause analyses.
- Calibrate vehicle systems, including control algorithms or other software systems.
- Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics.
- Conduct research studies to develop new concepts in the field of automotive engineering.
- Establish production or quality control standards.
- Alter or modify designs to obtain specified functional or operational performance.
- Research or implement green automotive technologies involving alternative fuels, electric or hybrid cars, or lighter or more fuel-efficient vehicles.
- Develop calibration methodologies, test methodologies, or tools.
- Create design alternatives for vehicle components, such as camless or dual-clutch engines or alternative air-conditioning systems, to increase fuel efficiency.
- Develop or implement operating methods or procedures.
- Develop engineering specifications or cost estimates for automotive design concepts.
- Conduct automotive design reviews.
- Design vehicles that use lighter materials, such as aluminum, magnesium alloy, or plastic, to improve fuel efficiency.
- Write, review, or maintain engineering documentation.
- Develop specifications for vehicles powered by alternative fuels or alternative power methods.
- Build models for algorithm or control feature verification testing.
- Coordinate production activities with other functional units, such as procurement, maintenance, or quality control.
- Design control systems or algorithms for purposes such as automotive energy management, emissions management, or increased operational safety or performance.
- Develop or integrate control feature requirements.
- Research computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products.
- Design vehicles for increased recyclability or use of natural, renewable, or recycled materials in vehicle construction.
- Prepare or present technical or project status reports.
- Prepare reports, deliver presentations, or participate in program review activities to communicate engineering results or recommendations.
- Provide scientific or technical guidance or expertise to scientists, engineers, technologists, technicians, or others, using knowledge of chemical, analytical, or biological processes as applied to micro and nanoscale systems.
- Supervise technologists or technicians engaged in nanotechnology research or production.
- Conduct research related to a range of nanotechnology topics, such as packaging, heat transfer, fluorescence detection, nanoparticle dispersion, hybrid systems, liquid systems, nanocomposites, nanofabrication, optoelectronics, or nanolithography.
- Synthesize, process, or characterize nanomaterials, using advanced tools or techniques.
- Design or conduct tests of new nanotechnology products, processes, or systems.
- Create designs or prototypes for nanosystem applications, such as biomedical delivery systems or atomic force microscopes.
- Write proposals to secure external funding or to partner with other companies.
- Generate high-resolution images or measure force-distance curves, using techniques such as atomic force microscopy.
- Develop processes or identify equipment needed for pilot or commercial nanoscale scale production.
- Provide technical guidance or support to customers on topics such as nanosystem start-up, maintenance, or use.
- Engineer production processes for specific nanotechnology applications, such as electroplating, nanofabrication, or epoxy.
- Apply nanotechnology to improve the performance or reduce the environmental impact of energy products, such as fuel cells or solar cells.
- Identify new applications for existing nanotechnologies.
- Design or engineer nanomaterials, nanodevices, nano-enabled products, or nanosystems, using three-dimensional computer-aided design (CAD) software.
- Design nano-enabled products with reduced toxicity, increased durability, or improved energy efficiency.
- Coordinate or supervise the work of suppliers or vendors in the designing, building, or testing of nanosystem devices, such as lenses or probes.
- Design nano-based manufacturing processes to minimize water, chemical, or energy use, as well as to reduce waste production.
- Design nanosystems with components such as nanocatalysts or nanofiltration devices to clean specific pollutants from hazardous waste sites.
- Prepare nanotechnology-related invention disclosures or patent applications.
- Reengineer nanomaterials to improve biodegradability.
- Integrate nanotechnology with antimicrobial properties into products, such as household or medical appliances, to reduce the development of bacteria or other microbes.
- Develop catalysis or other green chemistry methods to synthesize nanomaterials, such as nanotubes, nanocrystals, nanorods, or nanowires.
- Design nanoparticle catalysts to detect or remove chemical or other pollutants from water, soil, or air.
- Develop green building nanocoatings, such as self-cleaning, anti-stain, depolluting, anti-fogging, anti-icing, antimicrobial, moisture-resistant, or ultraviolet protectant coatings.
- Prepare reports, deliver presentations, or participate in program review activities to communicate engineering results or recommendations.
- Maintain records, document actions, and present written progress reports.
- Follow established safety rules and regulations and maintain a safe and clean environment.
- Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
- Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
- Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
- Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
- Verify trueness of structure, using plumb bob and level.
- Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
- Erect scaffolding or ladders for assembling structures above ground level.
- Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.
- Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
- Maintain job records and schedule work crew.
- Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers.
- Bore boltholes in timber, masonry or concrete walls, using power drill.
- Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.
- Dig or direct digging of post holes and set poles to support structures.
- Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.
- Construct forms or chutes for pouring concrete.
- Arrange for subcontractors to deal with special areas, such as heating or electrical wiring work.
- Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.
- Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.
- Select and order lumber or other required materials.
- Work with or remove hazardous material.
- Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.
- Prepare cost estimates for clients or employers.
- Perform minor plumbing, welding, or concrete mixing work.
- Apply shock-absorbing, sound-deadening, or decorative paneling to ceilings or walls.
- Examine structural timbers and supports to detect decay, and replace timbers as required, using hand tools, nuts, and bolts.
- Build sleds from logs and timbers for use in hauling camp buildings and machinery through wooded areas.
- Maintain records, document actions, and present written progress reports.
- Prepare reports to be submitted to company's data processing department.
- Examine claims forms and other records to determine insurance coverage.
- Analyze information gathered by investigation and report findings and recommendations.
- Pay and process claims within designated authority level.
- Investigate, evaluate, and settle claims, applying technical knowledge and human relations skills to effect fair and prompt disposal of cases and to contribute to a reduced loss ratio.
- Verify and analyze data used in settling claims to ensure that claims are valid and that settlements are made according to company practices and procedures.
- Review police reports, medical treatment records, medical bills, or physical property damage to determine the extent of liability.
- Investigate and assess damage to property and create or review property damage estimates.
- Interview or correspond with agents and claimants to correct errors or omissions and to investigate questionable claims.
- Interview or correspond with claimants, witnesses, police, physicians, or other relevant parties to determine claim settlement, denial, or review.
- Enter claim payments, reserves and new claims on computer system, inputting concise yet sufficient file documentation.
- Resolve complex, severe exposure claims, using high service oriented file handling.
- Adjust reserves or provide reserve recommendations to ensure that reserve activities are consistent with corporate policies.
- Confer with legal counsel on claims requiring litigation.
- Examine claims investigated by insurance adjusters, further investigating questionable claims to determine whether to authorize payments.
- Maintain claim files, such as records of settled claims and an inventory of claims requiring detailed analysis.
- Refer questionable claims to investigator or claims adjuster for investigation or settlement.
- Collect evidence to support contested claims in court.
- Contact or interview claimants, doctors, medical specialists, or employers to get additional information.
- Present cases and participate in their discussion at claim committee meetings.
- Report overpayments, underpayments, and other irregularities.
- Attend mediations or trials.
- Supervise claims adjusters to ensure that adjusters have followed proper methods.
- Conduct detailed bill reviews to implement sound litigation management and expense control.
- Communicate with reinsurance brokers to obtain information necessary for processing claims.
- Examine titles to property to determine validity and act as company agent in transactions with property owners.
- Obtain credit information from banks and other credit services.
- Communicate with former associates to verify employment record or to obtain background information regarding persons or businesses applying for credit.
- Negotiate claim settlements or recommend litigation when settlement cannot be negotiated.
- Prepare reports to be submitted to company's data processing department.
- Prepare reports on logistics performance measures.
- Maintain databases of logistics information.
- Remotely monitor the flow of vehicles or inventory, using Web-based logistics information systems to track vehicles or containers.
- Communicate with or monitor service providers, such as ocean carriers, air freight forwarders, global consolidators, customs brokers, or trucking companies.
- Track product flow from origin to final delivery.
- Interpret data on logistics elements, such as availability, maintainability, reliability, supply chain management, strategic sourcing or distribution, supplier management, or transportation.
- Recommend improvements to existing or planned logistics processes.
- Apply analytic methods or tools to understand, predict, or control logistics operations or processes.
- Enter logistics-related data into databases.
- Provide ongoing analyses in areas such as transportation costs, parts procurement, back orders, or delivery processes.
- Analyze logistics data, using methods such as data mining, data modeling, or cost or benefit analysis.
- Monitor inventory transactions at warehouse facilities to assess receiving, storage, shipping, or inventory integrity.
- Maintain logistics records in accordance with corporate policies.
- Contact carriers for rates or schedules.
- Manage systems to ensure that pricing structures adequately reflect logistics costing.
- Confer with logistics management teams to determine ways to optimize service levels, maintain supply-chain efficiency, or minimize cost.
- Compute reporting metrics, such as on-time delivery rates, order fulfillment rates, or inventory turns.
- Identify opportunities for inventory reductions.
- Review procedures, such as distribution or inventory management, to ensure maximum efficiency or minimum cost.
- Develop or maintain models for logistics uses, such as cost estimating or demand forecasting.
- Monitor industry standards, trends, or practices to identify developments in logistics planning or execution.
- Write or revise standard operating procedures for logistics processes.
- Reorganize shipping schedules to consolidate loads, maximize vehicle usage, or limit the movement of empty vehicles or containers.
- Contact potential vendors to determine material availability.
- Develop or maintain payment systems to ensure accuracy of vendor payments.
- Develop or maintain freight rate databases for use by supply chain departments to determine the most economical modes of transportation.
- Route or reroute drivers in real time with remote route navigation software, satellite linkup systems, or global positioning systems (GPS) to improve operational efficiencies.
- Determine packaging requirements.
- Enter carbon-output or environmental-impact data into spreadsheets or environmental management or auditing software programs.
- Compare locations or environmental policies of carriers or suppliers to make transportation decisions with lower environmental impact.
- Arrange for sale or lease of excess storage or transport capacity to minimize losses or inefficiencies associated with empty space.
- Prepare reports on logistics performance measures.
