- Fill chipped or low spots in surfaces of devices, using acrylic resins.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 1 | 1 | 51-9123.00 | Painting, Coating, and Decorating Workers |
| 1 | 1 | 2 | 51-7021.00 | Furniture Finishers |
| 1 | 1 | 2 | 51-9197.00 | Tire Builders |
| 1 | 1 | 2 | 51-9195.00 | Molders, Shapers, and Casters, Except Metal and Plastic |
| 1 | 1 | 2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-9194.00 | Etchers and Engravers |
| 1 | 1 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
- Clean and maintain tools and equipment, using solvents, brushes, and rags.
- Read job orders and inspect workpieces to determine work procedures and materials required.
- Immerse workpieces into coating materials for specified times.
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Melt or heat coating materials to specified temperatures.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Cut out sections in surfaces of materials to be inlaid with decorative pieces, using patterns and knives or scissors.
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Smooth, shape, and touch up surfaces to prepare them for finishing, using sandpaper, pumice stones, steel wool, chisels, sanders, or grinders.
- Remove accessories prior to finishing, and mask areas that should not be exposed to finishing processes or substances.
- Remove old finishes and damaged or deteriorated parts, using hand tools, stripping tools, sandpaper, steel wool, abrasives, solvents, or dip baths.
- Treat warped or stained surfaces to restore original contours and colors.
- Select appropriate finishing ingredients such as paint, stain, lacquer, shellac, or varnish, depending on factors such as wood hardness and surface type.
- Mix finish ingredients to obtain desired colors or shades.
- Remove excess solvent, using cloths soaked in paint thinner.
- Examine furniture to determine the extent of damage or deterioration, and to decide on the best method for repair or restoration.
- Distress surfaces with woodworking tools or abrasives before staining to create an antique appearance, or rub surfaces to bring out highlights and shadings.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Disassemble items to prepare them for finishing, using hand tools.
- Confer with customers to determine furniture colors or finishes.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Wash surfaces to prepare them for finish application.
- Follow blueprints to produce specific designs.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Replace or refurbish upholstery of items, using tacks, adhesives, softeners, solvents, stains, or polish.
- Design, create, and decorate entire pieces or specific parts of furniture, such as draws for cabinets.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Fill cuts and holes in tires, using hot rubber.
- Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.
- Trim excess rubber and imperfections during retreading processes.
- Place tires into molds for new tread.
- Fit inner tubes and final layers of rubber onto tires.
- Buff tires according to specifications for width and undertread depth.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Start rollers that bond tread and plies as drums revolve.
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Roll camelbacks onto casings by hand, and cut camelbacks, using knives.
- Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
- Measure tires to determine mold size requirements.
- Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Cut plies at splice points, and press ends together to form continuous bands.
- Activate bead setters that press prefabricated beads onto plies.
- Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.
- Clean and paint completed tires.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Position rollers that turn ply edges under and over beads, or use steel rods to turn ply edges.
- Depress pedals to collapse drums after processing is complete.
- Wind chafers and breakers onto plies.
- Pull plies from supply racks, and align plies with edges of drums.
- Fill cuts and holes in tires, using hot rubber.
- Patch broken edges or fractures, using clay or plaster.
- Read work orders or examine parts to determine parts or sections of products to be produced.
- Trim or remove excess material, using scrapers, knives, or band saws.
- Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage.
- Engrave or stamp identifying symbols, letters, or numbers on products.
- Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges.
- Clean, finish, and lubricate molds and mold parts.
- Separate models or patterns from molds and examine products for accuracy.
- Set the proper operating temperature for each casting.
- Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.
- Align and assemble parts to produce completed products, using gauges and hand tools.
- Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds.
- Select sizes and types of molds according to instructions.
- Withdraw cores or other loose mold members after castings solidify.
- Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools.
- Measure and cut products to specified dimensions, using measuring and cutting instruments.
- Smooth surfaces of molds, using scraping tools or sandpaper.
- Measure ingredients and mix molding, casting material, or sealing compounds to prescribed consistencies, according to formulas.
- Remove excess materials and level and smooth wet mold mixtures.
- Operate molding machines that compact sand in flasks to form molds.
- Place forms around models and separately immerse each half portion of a model in plaster, wax, or other mold-making materials.
- Verify dimensions of products, using measuring instruments, such as calipers, vernier gauges, or protractors.
- Bore holes or cut grates, risers, or pouring spouts in molds, using power tools.
- Locate and scribe parting lines on patterns, using measuring instruments, such as calipers, squares, or depth gauges.
- Tap or tilt molds to ensure uniform distribution of materials.
- Construct or form molds for use in casting clay or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks.
- Pour, pack, spread, or press plaster, concrete, or other materials into or around models or molds.
- Patch broken edges or fractures, using clay or plaster.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Prepare and apply stencils, computer-generated decals, or other decorative items to finished products.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Fill etched characters with opaque paste to improve readability.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Fill etched characters with opaque paste to improve readability.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Clamp metal and plywood strips around dies or patterns to form molds.
- Pull level and toggle latches to fill molds, to regulate tension on sheeting, and to release mold covers.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Shape molds to specified contours, using sand, and trowels and related tools.
- Assemble shell halves, patterns, and foundry flasks, and reinforce core boxes, using glue, clamps, wire, bolts, rams, or machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
