- Review traffic control or barricade plans to issue permits for parades or other special events or for construction work that affects rights of way, providing assistance with plan preparation or revision, as necessary.
Occupations with related tasks Save Table: XLSX CSV
- Read bills of lading to determine assignment details.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Read and interpret maps to determine vehicle routes.
- Check all load-related documentation for completeness and accuracy.
- Inspect loads to ensure that cargo is secure.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
- Crank trailer landing gear up or down to safely secure vehicles.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
- Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
- Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
- Drive trucks with capacities greater than 3 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
- Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
- Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
- Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
- Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
- Remove debris from loaded trailers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Follow appropriate safety procedures for transporting dangerous goods.
- Inventory and inspect goods to be moved to determine quantities and conditions.
- Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
- Give directions to laborers who are packing goods and moving them onto trailers.
- Operate trucks equipped with snowplows or sander attachments to maintain roads in winter weather.
- Drive electric or hybrid-electric powered trucks or alternative fuel-powered trucks to transport and deliver products, livestock, or other materials.
- Read bills of lading to determine assignment details.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Read and interpret maps to determine vehicle routes.
- Review schedules, switching orders, way bills, and shipping records to obtain cargo loading and unloading information and to plan work.
- Confirm routes and destination information for freight cars.
- Signal engineers to begin train runs, stop trains, or change speed, using telecommunications equipment or hand signals.
- Confer with engineers regarding train routes, timetables, and cargoes, and to discuss alternative routes when there are rail defects or obstructions.
- Receive information regarding train or rail problems from dispatchers or from electronic monitoring devices.
- Receive instructions from dispatchers regarding trains' routes, timetables, and cargoes.
- Direct and instruct workers engaged in yard activities, such as switching tracks, coupling and uncoupling cars, and routing inbound and outbound traffic.
- Operate controls to activate track switches and traffic signals.
- Keep records of the contents and destination of each train car, and make sure that cars are added or removed at proper points on routes.
- Arrange for the removal of defective cars from trains at stations or stops.
- Direct engineers to move cars to fit planned train configurations, combining or separating cars to make up or break up trains.
- Inspect each car periodically during runs.
- Verify accuracy of timekeeping instruments with engineers to ensure trains depart on time.
- Document and prepare reports of accidents, unscheduled stops, or delays.
- Instruct workers to set warning signals in front and at rear of trains during emergency stops.
- Observe yard traffic to determine tracks available to accommodate inbound and outbound traffic.
- Supervise workers in the inspection and maintenance of mechanical equipment to ensure efficient and safe train operation.
- Supervise and coordinate crew activities to transport freight and passengers and to provide boarding, porter, maid, and meal services to passengers.
- Record departure and arrival times, messages, tickets and revenue collected, and passenger accommodations and destinations.
- Inspect freight cars for compliance with sealing procedures, and record car numbers and seal numbers.
- Collect tickets, fares, or passes from passengers.
- Instruct workers to regulate air conditioning, lighting, and heating in passenger cars to ensure passengers' comfort.
- Review schedules, switching orders, way bills, and shipping records to obtain cargo loading and unloading information and to plan work.
- Confirm routes and destination information for freight cars.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Determine load weights and check them against lifting capacities to prevent overload.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Weigh bundles, using floor scales, and record weights for company records.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Read operating schedules or instructions or receive verbal orders to determine amounts to be pumped.
- Monitor gauges and flowmeters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
- Record operating data such as products and quantities pumped, stocks used, gauging results, and operating times.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of interconnections and capacities of pipelines, valve manifolds, pumps, and tankage.
- Turn valves and start pumps to start or regulate flows of substances such as gases, liquids, slurries, or powdered materials.
- Communicate with other workers, using signals, radios, or telephones, to start and stop flows of materials or substances.
- Connect hoses and pipelines to pumps and vessels prior to material transfer, using hand tools.
- Tend vessels that store substances such as gases, liquids, slurries, or powdered materials, checking levels of substances by using calibrated rods or by reading mercury gauges and tank charts.
- Clean, lubricate, and repair pumps and vessels, using hand tools and equipment.
- Test materials and solutions, using testing equipment.
- Tend auxiliary equipment such as water treatment and refrigeration units, and heat exchangers.
- Add chemicals and solutions to tanks to ensure that specifications are met.
- Collect and deliver sample solutions for laboratory analysis.
- Pump two or more materials into one tank to blend mixtures.
- Read operating schedules or instructions or receive verbal orders to determine amounts to be pumped.
- Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
- Move freight, stock, or other materials to and from storage or production areas, loading docks, delivery vehicles, ships, or containers, by hand or using trucks, tractors, or other equipment.
- Sort cargo before loading and unloading.
- Attach identifying tags to containers or mark them with identifying information.
- Stack cargo in locations, such as transit sheds or in holds of ships as directed, using pallets or cargo boards.
- Record numbers of units handled or moved, using daily production sheets or work tickets.
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Direct spouts and position receptacles, such as bins, carts, or containers, so they can be loaded.
- Attach slings, hooks, or other devices to lift cargo and guide loads.
- Maintain equipment storage areas to ensure that inventory is protected.
- Adjust controls to guide, position, or move equipment, such as cranes, booms, or cameras.
- Guide loads being lifted to prevent swinging.
- Wash out cargo containers or storage areas.
- Pack containers and re-pack damaged containers.
- Carry needed tools or supplies from storage or trucks and return them after use.
- Shovel material, such as gravel, ice, or spilled concrete, into containers or bins or onto conveyors.
- Connect electrical equipment to power sources so that it can be tested before use.
- Carry out general yard duties, such as performing shunting on railway lines.
- Rig or dismantle props or equipment, such as frames, scaffolding, platforms, or backdrops, using hand tools.
- Adjust or replace equipment parts, such as rollers, belts, plugs, or caps, using hand tools.
- Bundle and band material such as fodder or tobacco leaves, using banding machines.
- Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.
- Prepare and submit reports after completion of freight shipments.
- Inspect shipments to ensure that freight is securely braced and blocked.
- Record details about freight conditions, handling of freight, and any problems encountered.
- Advise crews in techniques of stowing dangerous and heavy cargo.
- Observe loading of freight to ensure that crews comply with procedures.
- Recommend remedial procedures to correct any violations found during inspections.
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.
- Notify workers of any special treatment required for shipments.
- Direct crews to reload freight or to insert additional bracing or packing as necessary.
- Check temperatures and humidities of shipping and storage areas to ensure that they are at appropriate levels to protect cargo.
- Read draft markings to determine depths of vessels in water.
- Issue certificates of compliance for vessels without violations.
- Write certificates of admeasurement that list details such as designs, lengths, depths, and breadths of vessels, and methods of propulsion.
- Post warning signs on vehicles containing explosives or flammable or radioactive materials.
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.
- Time rolls of ships, using stopwatches.
- Determine types of licenses and safety equipment required, and compute applicable fees such as tolls and wharfage fees.
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.
- Visually inspect cargo for damage upon arrival or discharge.
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.
- Review orders, production schedules, blueprints, or shipping or receiving notices to determine work sequences and material shipping dates, types, volumes, or destinations.
- Enforce safety rules and regulations.
- Interpret transportation or tariff regulations, shipping orders, safety regulations, or company policies and procedures for workers.
- Resolve worker problems or collaborate with employees to assist in problem resolution.
- Confer with customers, supervisors, contractors, or other personnel to exchange information or to resolve problems.
- Plan work assignments and equipment allocations to meet transportation, operations or production goals.
- Examine, measure, or weigh cargo or materials to determine specific handling requirements.
- Explain and demonstrate work tasks to new workers or assign training tasks to experienced workers.
- Drive vehicles or operate machines or equipment to complete work assignments or to assist workers.
- Inspect or test materials, stock, vehicles, equipment, or facilities to ensure that they are safe, free of defects, and consistent with specifications.
- Maintain or verify records of time, materials, expenditures, or crew activities.
- Requisition needed personnel, supplies, equipment, parts, or repair services.
- Recommend and implement measures to improve worker motivation, equipment performance, work methods, or customer services.
- Prepare, compile, and submit reports on work activities, operations, production, or work-related accidents.
- Dispatch personnel and vehicles in response to telephone or radio reports of emergencies.
- Monitor field work to ensure proper performance and use of materials.
- Recommend or implement personnel actions, such as employee selection, evaluation, rewards, or disciplinary actions.
- Perform or schedule repairs or preventive maintenance of vehicles or other equipment.
- Compute or estimate cash, payroll, transportation, personnel, or storage requirements.
- Assist workers in tasks, such as loading vehicles.
- Direct workers in transportation or related services, such as pumping, moving, storing, or loading or unloading of materials.
- Plan and establish schedules.
- Review orders, production schedules, blueprints, or shipping or receiving notices to determine work sequences and material shipping dates, types, volumes, or destinations.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Operate consoles to control automatic palletizing equipment.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Operate elevator systems in conjunction with conveyor systems.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Review physicians' orders to confirm prescribed exams.
- Conduct screening interviews of patients to identify contraindications, such as ferrous objects, pregnancy, prosthetic heart valves, cardiac pacemakers, or tattoos.
- Select appropriate imaging techniques or coils to produce required images.
- Operate magnetic resonance imaging (MRI) scanners.
- Position patients on cradle, attaching immobilization devices, if needed, to ensure appropriate placement for imaging.
- Take brief medical histories from patients.
- Inspect images for quality, using magnetic resonance scanner equipment and laser camera.
- Intravenously inject contrast dyes, such as gadolinium contrast, in accordance with scope of practice.
- Test magnetic resonance imaging (MRI) equipment to ensure proper functioning and performance in accordance with specifications.
- Instruct medical staff or students in magnetic resonance imaging (MRI) procedures or equipment operation.
- Write reports or notes to summarize testing procedures or outcomes for physicians or other medical professionals.
- Comfort patients during exams, or request sedatives or other medication from physicians for patients with anxiety or claustrophobia.
- Explain magnetic resonance imaging (MRI) procedures to patients, patient representatives, or family members.
- Calibrate magnetic resonance imaging (MRI) console or peripheral hardware.
- Troubleshoot technical issues related to magnetic resonance imaging (MRI) scanner or peripheral equipment, such as monitors or coils.
- Connect physiological leads to physiological acquisition control (PAC) units.
- Operate optical systems to capture dynamic magnetic resonance imaging (MRI) images, such as functional brain imaging, real-time organ motion tracking, or musculoskeletal anatomy and trajectory visualization.
- Attach physiological monitoring leads to patient's finger, chest, waist, or other body parts.
- Conduct inventories to maintain stock of clinical supplies.
- Place and secure small, portable magnetic resonance imaging (MRI) scanners on body part to be imaged, such as arm, leg, or head.
- Develop or otherwise produce film records of magnetic resonance images.
- Schedule appointments for research subjects or clinical patients.
- Provide headphones or earplugs to patients to improve comfort and reduce unpleasant noise.
- Create backup copies of images by transferring images from disk to storage media or workstation.
- Review physicians' orders to confirm prescribed exams.
- Read switching instructions and daily car schedules to determine work to be performed, or receive orders from yard conductors.
- Observe and respond to wayside and cab signals, including color light signals, position signals, torpedoes, flags, and hot box detectors.
- Inspect engines before and after use to ensure proper operation.
- Apply and release hand brakes.
- Signal crew members for movement of engines or trains, using lanterns, hand signals, radios, or telephones.
- Confer with conductors and other workers via radiotelephones or computers to exchange switching information.
- Inspect track for defects such as broken rails and switch malfunctions.
- Observe water levels and oil, air, and steam pressure gauges to ensure proper operation of equipment.
- Couple and uncouple air hoses and electrical connections between cars.
- Drive engines within railroad yards or other establishments to couple, uncouple, or switch railroad cars.
- Inspect the condition of stationary trains, rolling stock, and equipment.
- Receive, relay, and act upon instructions and inquiries from train operations and customer service center personnel.
- Spot cars for loading and unloading at customer locations.
- Operate track switches, derails, automatic switches, and retarders to change routing of train or cars.
- Report arrival and departure times, train delays, work order completion, and time on duty.
- Perform routine repair and maintenance duties.
- Drive locomotives to and from various stations in roundhouses to have locomotives cleaned, serviced, repaired, or supplied.
- Pull knuckles to open them for coupling.
- Provide assistance in aligning drawbars, using available equipment to lift, pull, or push on the drawbars.
- Ride on moving cars by holding onto grab irons and standing on ladder steps.
- Operate switching diesel engines to switch railroad cars, using remote controls.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Operate and control dinkey engines to transport and shunt cars at industrial or mine sites.
- Operate flatcars equipped with derricks or railcars to transport personnel or equipment.
- Provide assistance in the installation or repair of rails and ties.
- Read switching instructions and daily car schedules to determine work to be performed, or receive orders from yard conductors.
- Obtain and review data such as load weights, fuel supplies, weather conditions, and flight schedules to determine flight plans and identify needed changes.
- Use instrumentation to pilot aircraft when visibility is poor.
- Start engines, operate controls, and pilot airplanes to transport passengers, mail, or freight according to flight plans, regulations, and procedures.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Check aircraft prior to flights to ensure that the engines, controls, instruments, and other systems are functioning properly.
- Consider airport altitudes, outside temperatures, plane weights, and wind speeds and directions to calculate the speed needed to become airborne.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- File instrument flight plans with air traffic control so that flights can be coordinated with other air traffic.
- Check baggage or cargo to ensure that it has been loaded correctly.
- Order changes in fuel supplies, loads, routes, or schedules to ensure safety of flights.
- Plan flights according to government and company regulations, using aeronautical charts and navigation instruments.
- Choose routes, altitudes, and speeds that will provide the fastest, safest, and smoothest flights.
- Co-pilot aircraft or perform captain's duties, as required.
- Coordinate flight activities with ground crews and air traffic control, and inform crew members of flight and test procedures.
- Request changes in altitudes or routes as circumstances dictate.
- Write specified information in flight records, such as flight times, altitudes flown, and fuel consumption.
- Supervise other crew members.
- Fly with other pilots or pilot-license applicants to evaluate their proficiency.
- Rescue and evacuate injured persons.
- Instruct other pilots and student pilots in aircraft operations.
- Teach company regulations and procedures to other pilots.
- Perform minor aircraft maintenance and repair work, or arrange for major maintenance.
- Conduct in-flight tests and evaluations at specified altitudes and in all types of weather to determine the receptivity and other characteristics of equipment and systems.
- Plan and formulate flight activities and test schedules and prepare flight evaluation reports.
- Pilot airplanes or helicopters over farmlands at low altitudes to dust or spray fields with fertilizers, fungicides, or pesticides.
- Check the flight performance of new and experimental planes.
- Obtain and review data such as load weights, fuel supplies, weather conditions, and flight schedules to determine flight plans and identify needed changes.
- Check military flight plans with civilian agencies.
- Inspect airfield conditions to ensure compliance with federal regulatory requirements.
- Implement airfield safety procedures to ensure a safe operating environment for personnel and aircraft operation.
- Conduct inspections of the airport property and perimeter to maintain controlled access to airfields.
- Assist in responding to aircraft and medical emergencies.
- Initiate or conduct airport-wide coordination of snow removal on runways and taxiways.
- Manage wildlife on and around airport grounds.
- Coordinate communications between air traffic control and maintenance personnel.
- Perform and supervise airfield management activities, including mobile airfield management functions.
- Plan and coordinate airfield construction.
- Monitor the arrival, parking, refueling, loading, and departure of all aircraft.
- Train operations staff.
- Coordinate with agencies, such as air traffic control, civil engineers, or command posts, to ensure support of airfield management activities.
- Relay departure, arrival, delay, aircraft and airfield status, and other pertinent information to upline controlling agencies.
- Provide aircrews with information and services needed for airfield management and flight planning.
- Coordinate with agencies to meet aircrew requirements for billeting, messing, refueling, ground transportation, and transient aircraft maintenance.
- Use airfield landing and navigational aids and digital data terminal communications equipment to perform duties.
- Receive, transmit, and control message traffic.
- Maintain air-to-ground and point-to-point radio contact with aircraft commanders.
- Procure, produce, and provide information on the safe operation of aircraft, such as flight planning publications, operations publications, charts and maps, or weather information.
- Anticipate aircraft equipment needs for air evacuation and cargo flights.
- Post visual display boards and status boards.
- Receive and post weather information and flight plan data, such as air routes or arrival and departure times.
- Conduct departure and arrival briefings.
- Collaborate with others to plan flight schedules and air crew assignments.
- Maintain flight and event logs, air crew flying records, and flight operations records of incoming and outgoing flights.
- Coordinate changes to flight itineraries with appropriate Air Traffic Control (ATC) agencies.
- Check military flight plans with civilian agencies.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
- Handle high voltage sources and hang electrical cables.
- Drive loaded shuttle cars to ramps and move controls to discharge loads into mine cars or onto conveyors.
- Pry off loose material from roofs and move it into the paths of machines, using crowbars.
- Move trailing electrical cables clear of obstructions, using rubber safety gloves.
- Control conveyors that run the entire length of shuttle cars to distribute loads as loading progresses.
- Observe hand signals, grade stakes, or other markings when operating machines.
- Examine roadway and clear obstructions from the path of travel.
- Drive machines into piles of material blasted from working faces.
- Operate levers to move conveyor booms or shovels so that mine contents such as coal, rock, and ore can be placed into cars or onto conveyors.
- Clean, fuel, service, and perform safety checks on all equipment, and repair and replace parts as necessary.
- Clean hoppers, and clean spillage from tracks, walks, driveways, and conveyor decking.
- Oil, lubricate, and adjust conveyors, crushers, and other equipment, using hand tools and lubricating equipment.
- Monitor loading processes to ensure that materials are loaded according to specifications.
- Measure, weigh, or verify levels of rock, gravel, or other excavated material to prevent equipment overloads.
- Replace hydraulic hoses, headlight bulbs, and gathering-arm teeth.
- Stop gathering arms when cars are full.
- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
- Advance machines to gather material and convey it into cars.
- Signal workers to move loaded cars.
- Guide and stop cars by switching, applying brakes, or placing scotches, or wooden wedges, between wheels and rails.
- Observe and record car numbers, carriers, customers, tonnages, and grades and conditions of material.
- Notify switching departments to deliver specific types of cars.
- Inspect boarding and locking of open-top box cars and wedging of side-drop and hopper cars to prevent loss of material in transit.
- Maintain records of materials moved.
- Direct other workers to move stakes, place blocks, position anchors or cables, or move materials.
- Push or ride cars down slopes, or hook cars to cables and control cable drum brakes, to ease cars down inclines.
- Open and close bottom doors of cars to dump contents.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
