Helpers--Electricians
47-3013.00

Help electricians by performing duties requiring less skill. Duties include using, supplying, or holding materials or tools, and cleaning work area and equipment.

Sample of reported job titles: Apprentice, E and I Apprentice (Electrical and Instrumentation Apprentice), E and I Apprentice (Electrician and Instrumentation Apprentice), Electrical Apprentice, Electrical Helper, Electrician Apprentice, Electrician Helper, Electrician's Helper, Inside Wireman Apprentice, Wireman Apprentice

Occupation-Specific Information

Tasks

  • Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals for subsequent soldering.
  • Trace out short circuits in wiring, using test meter.
  • Measure, cut, and bend wire and conduit, using measuring instruments and hand tools.
  • Examine electrical units for loose connections and broken insulation and tighten connections, using hand tools.
  • Maintain tools, vehicles, and equipment and keep parts and supplies in order.
  • Drill holes and pull or push wiring through openings, using hand and power tools.
  • Clean work area and wash parts.
  • Perform semi-skilled and unskilled laboring duties related to the installation, maintenance and repair of a wide variety of electrical systems and equipment.
  • Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets, using hand tools.
  • Disassemble defective electrical equipment, replace defective or worn parts, and reassemble equipment, using hand tools.
  • Construct controllers and panels, using power drills, drill presses, taps, saws, and punches.
  • Transport tools, materials, equipment, and supplies to work site by hand, handtruck, or heavy, motorized truck.
  • String transmission lines or cables through ducts or conduits, under the ground, through equipment, or to towers.
  • Install copper-clad ground rods, using a manual post driver.
  • Dig trenches or holes for installation of conduit or supports.
  • Raise, lower, or position equipment, tools, and materials, using hoist, hand line, or block and tackle.
  • Bolt component parts together to form tower assemblies, using hand tools.
  • Erect electrical system components and barricades, and rig scaffolds, hoists, and shoring.
  • Trim trees and clear undergrowth along right-of-way.
  • Requisition materials, using warehouse requisition or release forms.
  • Solder electrical connections, using soldering iron.
  • Paint a variety of objects related to electrical functions.
  • Break up concrete, using airhammer, to facilitate installation, construction, or repair of equipment.
  • Operate heavy equipment, such as backhoes.
  • Operate cutting torches and welding equipment, while working with conduit and metal components to construct devices associated with electrical functions.

back to top

Technology Skills

Hot technology
Hot Technologies are requirements most frequently included across all employer job postings.

back to top

Occupational Requirements

Work Activities

  • Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems.
  • Inspecting Equipment, Structures, or Materials — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
  • Performing General Physical Activities — Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials.
  • Processing Information — Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
  • Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
  • Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
  • Communicating with Supervisors, Peers, or Subordinates — Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
  • Repairing and Maintaining Electronic Equipment — Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
  • Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
  • Monitoring Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
  • Organizing, Planning, and Prioritizing Work — Developing specific goals and plans to prioritize, organize, and accomplish your work.
  • Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
  • Analyzing Data or Information — Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
  • Evaluating Information to Determine Compliance with Standards — Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
  • Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job.
  • Coordinating the Work and Activities of Others — Getting members of a group to work together to accomplish tasks.
  • Operating Vehicles, Mechanized Devices, or Equipment — Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or watercraft.
  • Judging the Qualities of Objects, Services, or People — Assessing the value, importance, or quality of things or people.
  • Thinking Creatively — Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
  • Training and Teaching Others — Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
  • Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment — Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
  • Resolving Conflicts and Negotiating with Others — Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.
  • Assisting and Caring for Others — Providing personal assistance, medical attention, emotional support, or other personal care to others such as coworkers, customers, or patients.
  • Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
  • Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
  • Performing for or Working Directly with the Public — Performing for people or dealing directly with the public. This includes serving customers in restaurants and stores, and receiving clients or guests.
  • Scheduling Work and Activities — Scheduling events, programs, and activities, as well as the work of others.
  • Documenting/Recording Information — Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
  • Estimating the Quantifiable Characteristics of Products, Events, or Information — Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
  • Developing Objectives and Strategies — Establishing long-range objectives and specifying the strategies and actions to achieve them.
  • Providing Consultation and Advice to Others — Providing guidance and expert advice to management or other groups on technical, systems-, or process-related topics.
  • Guiding, Directing, and Motivating Subordinates — Providing guidance and direction to subordinates, including setting performance standards and monitoring performance.
  • Selling or Influencing Others — Convincing others to buy merchandise/goods or to otherwise change their minds or actions.
  • Coaching and Developing Others — Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
  • Communicating with People Outside the Organization — Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
  • Developing and Building Teams — Encouraging and building mutual trust, respect, and cooperation among team members.
  • Interpreting the Meaning of Information for Others — Translating or explaining what information means and how it can be used.
  • Monitoring and Controlling Resources — Monitoring and controlling resources and overseeing the spending of money.

back to top

Detailed Work Activities

back to top

Work Context

  • Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets — 91% responded “Every day.”
  • Face-to-Face Discussions — 89% responded “Every day.”
  • Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls — 78% responded “Continually or almost continually.”
  • Spend Time Standing — 62% responded “Continually or almost continually.”
  • Sounds, Noise Levels Are Distracting or Uncomfortable — 56% responded “Every day.”
  • Work With Work Group or Team — 62% responded “Extremely important.”
  • Contact With Others — 56% responded “Constant contact with others.”
  • Cramped Work Space, Awkward Positions — 63% responded “Once a week or more but not every day.”
  • Importance of Being Exact or Accurate — 56% responded “Extremely important.”
  • Exposed to Contaminants — 55% responded “Every day.”
  • Exposed to Hazardous Equipment — 51% responded “Every day.”
  • Physical Proximity — 35% responded “Moderately close (at arm's length).”
  • Outdoors, Exposed to Weather — 50% responded “Every day.”
  • Spend Time Walking and Running — 36% responded “Continually or almost continually.”
  • Time Pressure — 52% responded “Once a week or more but not every day.”
  • Spend Time Climbing Ladders, Scaffolds, or Poles — 42% responded “Continually or almost continually.”
  • Spend Time Making Repetitive Motions — 35% responded “Continually or almost continually.”
  • Indoors, Not Environmentally Controlled — 40% responded “Once a week or more but not every day.”
  • Spend Time Kneeling, Crouching, Stooping, or Crawling — 49% responded “More than half the time.”
  • Outdoors, Under Cover — 38% responded “Every day.”
  • Exposed to Hazardous Conditions — 49% responded “Every day.”
  • Frequency of Decision Making — 65% responded “Every day.”
  • Coordinate or Lead Others — 35% responded “Important.”
  • Responsible for Others' Health and Safety — 37% responded “Very high responsibility.”
  • Freedom to Make Decisions — 40% responded “Some freedom.”
  • Telephone — 37% responded “Every day.”
  • Impact of Decisions on Co-workers or Company Results — 35% responded “Important results.”
  • Spend Time Bending or Twisting the Body — 43% responded “About half the time.”
  • Very Hot or Cold Temperatures — 28% responded “Once a month or more but not every week.”
  • Exposed to High Places — 50% responded “Once a month or more but not every week.”
  • Structured versus Unstructured Work — 31% responded “Limited freedom.”
  • Importance of Repeating Same Tasks — 32% responded “Very important.”
  • Indoors, Environmentally Controlled — 35% responded “Once a month or more but not every week.”
  • Exposed to Minor Burns, Cuts, Bites, or Stings — 31% responded “Once a week or more but not every day.”
  • Extremely Bright or Inadequate Lighting — 29% responded “Once a week or more but not every day.”
  • Consequence of Error — 34% responded “Fairly serious.”

back to top

Experience Requirements

Job Zone

Title
Job Zone Two: Some Preparation Needed
Education
These occupations usually require a high school diploma.
Related Experience
Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
Job Training
Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples
These occupations often involve using your knowledge and skills to help others. Examples include orderlies, counter and rental clerks, customer service representatives, security guards, upholsterers, tellers, and dental laboratory technicians.
SVP Range
(4.0 to < 6.0)

back to top

Training & Credentials

State training
Local training
Certifications

back to top

Apprenticeship Opportunities

Start your career and build your skillset. Visit Apprenticeship.gov external site to learn about opportunities related to this occupation.

back to top

Worker Requirements

Skills

  • Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
  • Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.
  • Speaking — Talking to others to convey information effectively.
  • Coordination — Adjusting actions in relation to others' actions.
  • Judgment and Decision Making — Considering the relative costs and benefits of potential actions to choose the most appropriate one.
  • Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
  • Troubleshooting — Determining causes of operating errors and deciding what to do about it.

back to top

Knowledge

  • Building and Construction — Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
  • Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Public Safety and Security — Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
  • Customer and Personal Service — Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
  • Design — Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
  • Administration and Management — Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
  • Education and Training — Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
  • English Language — Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
  • Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
  • Engineering and Technology — Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
  • Physics — Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.
  • Transportation — Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

back to top

Education

How much education does a new hire need to perform a job in this occupation? Respondents said:

  • 71%
     
    responded: High school diploma or equivalent requiredmore info
  • 13%
     
    responded: Post-secondary certificate required
  • 11%
     
    responded: Less than high school diploma required

back to top

Worker Characteristics

Abilities

  • Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • Near Vision — The ability to see details at close range (within a few feet of the observer).
  • Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
  • Extent Flexibility — The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
  • Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
  • Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
  • Multilimb Coordination — The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
  • Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
  • Trunk Strength — The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
  • Visual Color Discrimination — The ability to match or detect differences between colors, including shades of color and brightness.
  • Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense.
  • Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
  • Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
  • Oral Expression — The ability to communicate information and ideas in speaking so others will understand.
  • Selective Attention — The ability to concentrate on a task over a period of time without being distracted.
  • Speech Recognition — The ability to identify and understand the speech of another person.
  • Gross Body Equilibrium — The ability to keep or regain your body balance or stay upright when in an unstable position.
  • Speech Clarity — The ability to speak clearly so others can understand you.
  • Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.

back to top

Interests

Interest code: RC
Want to discover your interests? Take the O*NET Interest Profiler at My Next Move.
  • Realistic — Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.
  • Conventional — Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or human resources.

back to top

Work Values

  • Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
  • Relationships — Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service.
  • Working Conditions — Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.

back to top

Work Styles

  • Attention to Detail — Job requires being careful about detail and thorough in completing work tasks.
  • Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations.
  • Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
  • Integrity — Job requires being honest and ethical.
  • Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
  • Stress Tolerance — Job requires accepting criticism and dealing calmly and effectively with high-stress situations.
  • Initiative — Job requires a willingness to take on responsibilities and challenges.
  • Persistence — Job requires persistence in the face of obstacles.
  • Analytical Thinking — Job requires analyzing information and using logic to address work-related issues and problems.
  • Self-Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
  • Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace.
  • Concern for Others — Job requires being sensitive to others' needs and feelings and being understanding and helpful on the job.
  • Leadership — Job requires a willingness to lead, take charge, and offer opinions and direction.
  • Innovation — Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.
  • Social Orientation — Job requires preferring to work with others rather than alone, and being personally connected with others on the job.
  • Independence — Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.

back to top

Workforce Characteristics

Wages & Employment Trends

Median wages (2022)
$17.82 hourly, $37,070 annual
State wages
Local wages
Employment (2022)
72,500 employees
Projected growth (2022-2032)
Decline (-2% or lower)
Projected job openings (2022-2032)
7,600
State trends
Top industries (2022)

Source: Bureau of Labor Statistics 2022 wage data external site and 2022-2032 employment projections external site. “Projected growth” represents the estimated change in total employment over the projections period (2022-2032). “Projected job openings” represent openings due to growth and replacement.

back to top

Job Openings on the Web

State job openings
Local job openings

back to top

More Information

back to top

Sources of Additional Information

Disclaimer: Sources are listed to provide additional information on related jobs, specialties, and/or industries. Links to non-DOL Internet sites are provided for your convenience and do not constitute an endorsement.

back to top