Related occupations for task:
Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.
47-2051.00 |
Cement Masons and Concrete Finishers
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Apply muriatic acid to clean surface, and rinse with water.
|
47-2053.00 |
Terrazzo Workers and Finishers
- Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
|
47-2141.00 |
Painters, Construction and Maintenance
- Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.
- Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
- Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting.
|
47-2061.00 |
Construction Laborers
Bright Outlook
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
|
47-2142.00 |
Paperhangers
- Apply sizing to seal surfaces and maximize adhesion of coverings to surfaces.
- Remove paint, varnish, dirt, and grease from surfaces, using paint remover and water soda solutions.
|
See all 17 related occupations >>