- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
Occupations with related tasks Save Table: XLSX CSV
- Pull knuckles to open them for coupling.
- Provide assistance in aligning drawbars, using available equipment to lift, pull, or push on the drawbars.
- Observe and respond to wayside and cab signals, including color light signals, position signals, torpedoes, flags, and hot box detectors.
- Inspect engines before and after use to ensure proper operation.
- Apply and release hand brakes.
- Signal crew members for movement of engines or trains, using lanterns, hand signals, radios, or telephones.
- Confer with conductors and other workers via radiotelephones or computers to exchange switching information.
- Inspect track for defects such as broken rails and switch malfunctions.
- Observe water levels and oil, air, and steam pressure gauges to ensure proper operation of equipment.
- Couple and uncouple air hoses and electrical connections between cars.
- Drive engines within railroad yards or other establishments to couple, uncouple, or switch railroad cars.
- Inspect the condition of stationary trains, rolling stock, and equipment.
- Read switching instructions and daily car schedules to determine work to be performed, or receive orders from yard conductors.
- Receive, relay, and act upon instructions and inquiries from train operations and customer service center personnel.
- Spot cars for loading and unloading at customer locations.
- Operate track switches, derails, automatic switches, and retarders to change routing of train or cars.
- Report arrival and departure times, train delays, work order completion, and time on duty.
- Perform routine repair and maintenance duties.
- Drive locomotives to and from various stations in roundhouses to have locomotives cleaned, serviced, repaired, or supplied.
- Ride on moving cars by holding onto grab irons and standing on ladder steps.
- Operate switching diesel engines to switch railroad cars, using remote controls.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Operate and control dinkey engines to transport and shunt cars at industrial or mine sites.
- Operate flatcars equipped with derricks or railcars to transport personnel or equipment.
- Provide assistance in the installation or repair of rails and ties.
- Pull knuckles to open them for coupling.
- Provide assistance in aligning drawbars, using available equipment to lift, pull, or push on the drawbars.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
- Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between loading, processing, and storage areas.
- Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other transport vehicles.
- Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and complete delivery.
- Signal workers to discharge, dump, or level materials.
- Weigh materials or products and record weight or other production data on tags or labels.
- Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging batteries, fueling, or replacing liquefied-gas tank.
- Operate or tend automatic stacking, loading, packaging, or cutting machines.
- Turn valves and open chutes to dump, spray, or release materials from dump cars or storage bins into hoppers.
- Hook tow trucks to trailer hitches and fasten attachments, such as graders, plows, rollers, or winch cables to tractors, using hitchpins.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
- Move or reposition hoists, winches, loads and materials, manually or using equipment and machines such as trucks, cars, and hand trucks.
- Move levers, pedals, and throttles to stop, start, and regulate speeds of hoist or winch drums in response to hand, bell, buzzer, telephone, loud-speaker, or whistle signals, or by observing dial indicators or cable marks.
- Start engines of hoists or winches and use levers and pedals to wind or unwind cable on drums.
- Observe equipment gauges and indicators and hand signals of other workers to verify load positions or depths.
- Operate compressed air, diesel, electric, gasoline, or steam-driven hoists or winches to control movement of cableways, cages, derricks, draglines, loaders, railcars, or skips.
- Select loads or materials according to weight and size specifications.
- Signal and assist other workers loading or unloading materials.
- Attach, fasten, and disconnect cables or lines to loads, materials, and equipment, using hand tools.
- Apply hand or foot brakes and move levers to lock hoists or winches.
- Oil winch drums so that cables will wind smoothly.
- Climb ladders to position and set up vehicle-mounted derricks.
- Repair, maintain, and adjust equipment, using hand tools.
- Tend auxiliary equipment, such as jacks, slings, cables, or stop blocks, to facilitate moving items or materials for further processing.
- Move or reposition hoists, winches, loads and materials, manually or using equipment and machines such as trucks, cars, and hand trucks.
- Position booms around docked ships.
- Operate engine throttles and steering mechanisms to guide boats on desired courses.
- Direct safety operations in emergency situations.
- Secure boats to docks with mooring lines, and cast off lines to enable departure.
- Maintain desired courses, using compasses or electronic navigational aids.
- Organize and direct the activities of crew members.
- Follow safety procedures to ensure the protection of passengers, cargo, and vessels.
- Maintain equipment such as range markers, fire extinguishers, boat fenders, lines, pumps, and fittings.
- Report any observed navigational hazards to authorities.
- Oversee operation of vessels used for carrying passengers, motor vehicles, or goods across rivers, harbors, lakes, and coastal waters.
- Service motors by performing tasks such as changing oil and lubricating parts.
- Arrange repairs, fuel, and supplies for vessels.
- Issue directions for loading, unloading, and seating in boats.
- Clean boats and repair hulls and superstructures, using hand tools, paint, and brushes.
- Tow, push, or guide other boats, barges, logs, or rafts.
- Take depth soundings in turning basins.
- Perform general labor duties such as repairing booms.
- Position booms around docked ships.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Seal outlet valves on tank cars, barges, and trucks.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Direct spouts and position receptacles, such as bins, carts, or containers, so they can be loaded.
- Move freight, stock, or other materials to and from storage or production areas, loading docks, delivery vehicles, ships, or containers, by hand or using trucks, tractors, or other equipment.
- Sort cargo before loading and unloading.
- Attach identifying tags to containers or mark them with identifying information.
- Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
- Stack cargo in locations, such as transit sheds or in holds of ships as directed, using pallets or cargo boards.
- Record numbers of units handled or moved, using daily production sheets or work tickets.
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Attach slings, hooks, or other devices to lift cargo and guide loads.
- Maintain equipment storage areas to ensure that inventory is protected.
- Adjust controls to guide, position, or move equipment, such as cranes, booms, or cameras.
- Guide loads being lifted to prevent swinging.
- Wash out cargo containers or storage areas.
- Pack containers and re-pack damaged containers.
- Carry needed tools or supplies from storage or trucks and return them after use.
- Shovel material, such as gravel, ice, or spilled concrete, into containers or bins or onto conveyors.
- Connect electrical equipment to power sources so that it can be tested before use.
- Carry out general yard duties, such as performing shunting on railway lines.
- Rig or dismantle props or equipment, such as frames, scaffolding, platforms, or backdrops, using hand tools.
- Adjust or replace equipment parts, such as rollers, belts, plugs, or caps, using hand tools.
- Bundle and band material such as fodder or tobacco leaves, using banding machines.
- Direct spouts and position receptacles, such as bins, carts, or containers, so they can be loaded.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Operate consoles to control automatic palletizing equipment.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Operate elevator systems in conjunction with conveyor systems.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
