- Admit required amounts of water, steam, cooking oils, or compressed air into equipment, such as by opening water valves to cool mixtures to the desired consistency.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 5 | 2 | 51-9193.00 | Cooling and Freezing Equipment Operators and Tenders 
|
| 1 | 4 | 2 | 51-4052.00 | Pourers and Casters, Metal |
| 1 | 3 | 2 | 51-4035.00 | Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 2 | 51-4051.00 | Metal-Refining Furnace Operators and Tenders |
| 1 | 2 | 2 | 51-4034.00 | Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 2 | 51-4194.00 | Tool Grinders, Filers, and Sharpeners |
| 1 | 2 | 2 | 51-9161.00 | Computer Numerically Controlled Tool Operators |
| 1 | 2 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
- Activate mechanical rakes to regulate flow of ice from storage bins to vats.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Start machinery, such as pumps, feeders, or conveyors, and turn valves to heat, admit, or transfer products, refrigerants, or mixes.
- Adjust machine or freezer speed and air intake to obtain desired consistency and amount of product.
- Weigh packages and adjust freezer air valves or switches on filler heads to obtain specified amounts of product in each container.
- Record temperatures, amounts of materials processed, or test results on report forms.
- Monitor pressure gauges, ammeters, flowmeters, thermometers, or products, and adjust controls to maintain specified conditions, such as feed rate, product consistency, temperature, air pressure, and machine speed.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Assemble equipment, and attach pipes, fittings, or valves, using hand tools.
- Measure or weigh specified amounts of ingredients or materials, and load them into tanks, vats, hoppers, or other equipment.
- Inspect and flush lines with solutions or steam, and spray equipment with sterilizing solutions.
- Load and position wrapping paper, sticks, bags, or cartons into dispensing machines.
- Sample and test product characteristics such as specific gravity, acidity, and sugar content, using hydrometers, pH meters, or refractometers.
- Start agitators to blend contents, or start beater, scraper, and expeller blades to mix contents with air and prevent sticking.
- Place or position containers into equipment, and remove containers after completion of cooling or freezing processes.
- Scrape, dislodge, or break excess frost, ice, or frozen product from equipment to prevent accumulation, using hands and hand tools.
- Stir material with spoons or paddles to mix ingredients or allow even cooling and prevent coagulation.
- Position molds on conveyors, and measure and adjust level of fill, using depth gauges.
- Insert forming fixtures, and start machines that cut frozen products into measured portions or specified shapes.
- Activate mechanical rakes to regulate flow of ice from storage bins to vats.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Start machinery, such as pumps, feeders, or conveyors, and turn valves to heat, admit, or transfer products, refrigerants, or mixes.
- Adjust machine or freezer speed and air intake to obtain desired consistency and amount of product.
- Weigh packages and adjust freezer air valves or switches on filler heads to obtain specified amounts of product in each container.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Collect samples, or signal workers to sample metal for analysis.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Add metal to molds to compensate for shrinkage.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Transport metal ingots to storage areas, using forklifts.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Remove workpieces from machines, and check to ensure that they conform to specifications, using measuring instruments such as microscopes, gauges, calipers, and micrometers.
- Verify alignment of workpieces on machines, using measuring instruments such as rules, gauges, or calipers.
- Observe milling or planing machine operation, and adjust controls to ensure conformance with specified tolerances.
- Select and install cutting tools and other accessories according to specifications, using hand tools or power tools.
- Position and secure workpieces on machines, using holding devices, measuring instruments, hand tools, and hoists.
- Replace worn tools, using hand tools, and sharpen dull tools, using bench grinders.
- Study blueprints, layouts, sketches, or work orders to assess workpiece specifications and to determine tooling instructions, tools and materials needed, and sequences of operations.
- Compute dimensions, tolerances, and angles of workpieces or machines according to specifications and knowledge of metal properties and shop mathematics.
- Move cutters or material manually or by turning handwheels, or engage automatic feeding mechanisms to mill workpieces to specifications.
- Mount attachments and tools, such as pantographs, engravers, or routers, to perform other operations, such as drilling or boring.
- Record production output.
- Make templates or cutting tools.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Start machines, monitor their operations, and record operational data.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Load workpieces, plastic material, or chemical solutions into machines.
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Clean and lubricate machines.
- Mark identifying data on workpieces.
- Clean work area.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Operate forklifts to deliver materials.
- Lubricate workpieces with oil.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Thread ends of metal coils from reels through slitters and secure ends on recoilers.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Replace defective blades or wheels, using hand tools.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
- Preheat workpieces, using heating furnaces or hand torches.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Hone cutters with oilstones to remove nicks.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Draw smelted metal samples from furnaces or kettles for analysis, and calculate types and amounts of materials needed to ensure that materials meet specifications.
- Weigh materials to be charged into furnaces, using scales.
- Record production data, and maintain production logs.
- Operate controls to move or discharge metal workpieces from furnaces.
- Inspect furnaces and equipment to locate defects and wear.
- Drain, transfer, or remove molten metal from furnaces, and place it into molds, using hoists, pumps, or ladles.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Prepare material to load into furnaces, including cleaning, crushing, or applying chemicals, by using crushing machines, shovels, rakes, or sprayers.
- Remove impurities from the surface of molten metal, using strainers.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Sprinkle chemicals over molten metal to bring impurities to the surface.
- Direct work crews in the cleaning and repair of furnace walls and flooring.
- Scrape accumulations of metal oxides from floors, molds, and crucibles, and sift and store them for reclamation.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
- Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
- Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
- Start lathe or turning machines and observe operations to ensure that specifications are met.
- Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
- Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
- Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
- Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
- Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
- Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
- Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Change worn cutting tools, using wrenches.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Observe drilling or boring machine operations to detect any problems.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Install tools in spindles.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Inspect, feel, and measure workpieces to ensure that surfaces and dimensions meet specifications.
- Study blueprints or layouts of metal workpieces to determine grinding procedures, and to plan machine setups and operational sequences.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Set up and operate grinding or polishing machines to grind metal workpieces, such as dies, parts, and tools.
- Dress grinding wheels, according to specifications.
- File or finish surfaces of workpieces, using prescribed hand tools.
- Perform basic maintenance, such as cleaning and lubricating machine parts.
- Remove finished workpieces from machines and place them in boxes or on racks, setting aside pieces that are defective.
- Remove and replace worn or broken machine parts, using hand tools.
- Fit parts together in pre-assembly to ensure that dimensions are accurate.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Duplicate workpiece contours, using tracer attachments.
- Inspect dies to detect defects, assess wear, and verify specifications, using micrometers, steel gauge pins, and loupes.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Straighten workpieces and remove dents, using straightening presses and hammers.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Implement changes to machine programs, and enter new specifications, using computers.
- Calculate machine speed and feed ratios and the size and position of cuts.
- Transfer commands from servers to computer numerical control (CNC) modules, using computer network links.
- Remove and replace dull cutting tools.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Maintain machines and remove and replace broken or worn machine tools, using hand tools.
- Insert control instructions into machine control units to start operation.
- Modify cutting programs to account for problems encountered during operation, and save modified programs.
- Write simple programs for computer-controlled machine tools.
- Lift workpieces to machines manually or with hoists or cranes.
- Input initial part dimensions into machine control panels.
- Set up future jobs while machines are operating.
- Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production.
- Stack or load finished items, or place items on conveyor systems.
- Clean machines, tooling, or parts, using solvents or solutions and rags.
- Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
- Lay out and mark areas of parts to be shot peened and fill hoppers with shot.
- Examine electronic components for defects or completeness of laser-beam trimming, using microscopes.
- Control coolant systems.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Thread extruded strips through water tanks and hold-down bars, or attach strands to wires and draw them through tubes.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Ignite burners to preheat products, or use torches to apply heat.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
