- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Occupations with related tasks Save Table: XLSX CSV
- Respond to emergencies, such as transformer or transmission line failures, and route current around affected areas.
- Control, monitor, or operate equipment that regulates or distributes electricity or steam, using data obtained from instruments or computers.
- Distribute or regulate the flow of power between entities, such as generating stations, substations, distribution lines, or users, keeping track of the status of circuits or connections.
- Manipulate controls to adjust or activate power distribution equipment or machines.
- Tend auxiliary equipment used in the power distribution process.
- Track conditions that could affect power needs, such as changes in the weather, and adjust equipment to meet any anticipated changes.
- Coordinate with engineers, planners, field personnel, or other utility workers to provide information such as clearances, switching orders, or distribution process changes.
- Direct personnel engaged in controlling or operating distribution equipment or machinery, such as instructing control room operators to start boilers or generators.
- Prepare switching orders that will isolate work areas without causing power outages, referring to drawings of power systems.
- Monitor and record switchboard or control board readings to ensure that electrical or steam distribution equipment is operating properly.
- Implement energy schedules, including real-time transmission reservations or schedules.
- Calculate load estimates or equipment requirements to determine required control settings.
- Record and compile operational data, such as chart or meter readings, power demands, or usage and operating times, using transmission system maps.
- Inspect equipment to ensure that specifications are met or to detect any defects.
- Respond to emergencies, such as transformer or transmission line failures, and route current around affected areas.
- Control, monitor, or operate equipment that regulates or distributes electricity or steam, using data obtained from instruments or computers.
- Distribute or regulate the flow of power between entities, such as generating stations, substations, distribution lines, or users, keeping track of the status of circuits or connections.
- Manipulate controls to adjust or activate power distribution equipment or machines.
- Tend auxiliary equipment used in the power distribution process.
- Track conditions that could affect power needs, such as changes in the weather, and adjust equipment to meet any anticipated changes.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Verify that well field monitoring data conforms to applicable regulations.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Develop or implement actions such as lockouts, tagouts, or clearances to allow equipment to be safely repaired.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Record operating data, such as the results of surveillance tests.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Dispatch orders or instructions to personnel through radiotelephone or intercommunication systems to coordinate auxiliary equipment operation.
- Review and edit standard operating procedures.
- Conduct inspections or operations outside of control rooms as necessary.
- Direct reactor operators in emergency situations, in accordance with emergency operating procedures.
- Authorize maintenance activities on units or changes in equipment or system operational status.
- Supervise technicians' work activities to ensure that equipment is operated in accordance with policies and procedures that protect workers from radiation and ensure environmental safety.
- Authorize actions to correct identified operational inefficiencies or hazards so that operating efficiency is maximized and potential environmental issues are minimized.
- Direct the collection and testing of air, water, gas, or solid samples to determine radioactivity levels or to ensure appropriate radioactive containment.
- Direct measurement of the intensity or types of radiation in work areas, equipment, or materials.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Draw smelted metal samples from furnaces or kettles for analysis, and calculate types and amounts of materials needed to ensure that materials meet specifications.
- Weigh materials to be charged into furnaces, using scales.
- Record production data, and maintain production logs.
- Operate controls to move or discharge metal workpieces from furnaces.
- Inspect furnaces and equipment to locate defects and wear.
- Drain, transfer, or remove molten metal from furnaces, and place it into molds, using hoists, pumps, or ladles.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Prepare material to load into furnaces, including cleaning, crushing, or applying chemicals, by using crushing machines, shovels, rakes, or sprayers.
- Remove impurities from the surface of molten metal, using strainers.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Sprinkle chemicals over molten metal to bring impurities to the surface.
- Direct work crews in the cleaning and repair of furnace walls and flooring.
- Scrape accumulations of metal oxides from floors, molds, and crucibles, and sift and store them for reclamation.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Calculate test result values, using standard formulas.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Clamp seals around valves to secure tanks.
- Coordinate shutdowns and major projects.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Lower thermometers into tanks to obtain temperature readings.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean and maintain equipment, using water hoses and scrapers.
- Clean workpieces, using wire brushes.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Preheat workpieces in ovens.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Explain assembly procedures or techniques to other workers.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Distribute materials, supplies, or subassemblies to work areas.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Mark and tag components so that stock inventory can be tracked and identified.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Complete, review, or maintain production, time, or component waste reports.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Paint structures as specified, using paint sprayers.
- Instruct customers in the installation, repair, or maintenance of products.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Record operational information on specified production reports.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Give directions to other workers regarding machine set-up and use.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Remove completed workpieces or parts from machinery, using hand tools.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Transfer components, metal products, or assemblies, using moving equipment.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Tend auxiliary equipment used in welding processes.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Anneal finished workpieces to relieve internal stress.
- Load or feed workpieces into welding machines to join or bond components.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
