Job Duties Custom List 53-2031.00 — Flight Attendants
- Direct and assist passengers in emergency procedures, such as evacuating a plane following an emergency landing.
Occupations with related tasks Save Table: XLSX CSV
- Handle passenger emergencies or disruptions.
- Drive vehicles over specified routes or to specified destinations according to time schedules, complying with traffic regulations to ensure that passengers have a smooth and safe ride.
- Park vehicles at loading areas so that passengers can board.
- Inspect vehicles and check gas, oil, and water levels prior to departure.
- Announce stops to passengers.
- Assist passengers, such as elderly or individuals with disabilities, on and off bus, ensure they are seated properly, help carry baggage, and answer questions about bus schedules or routes.
- Collect tickets or cash fares from passengers.
- Report delays or accidents.
- Advise passengers to be seated and orderly while on vehicles.
- Regulate heating, lighting, and ventilating systems for passenger comfort.
- Record information, such as cash receipts and ticket fares, and maintain log book.
- Maintain cleanliness of bus or motor coach.
- Read maps to plan bus routes.
- Load and unload baggage in baggage compartments.
- Handle passenger emergencies or disruptions.
- Rescue and evacuate injured persons.
- Check aircraft prior to flights to ensure that the engines, controls, instruments, and other systems are functioning properly.
- Co-pilot aircraft or perform captain's duties, as required.
- Consider airport altitudes, outside temperatures, plane weights, and wind speeds and directions to calculate the speed needed to become airborne.
- Use instrumentation to pilot aircraft when visibility is poor.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Order changes in fuel supplies, loads, routes, or schedules to ensure safety of flights.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- Plan flights according to government and company regulations, using aeronautical charts and navigation instruments.
- Start engines, operate controls, and pilot airplanes to transport passengers, mail, or freight according to flight plans, regulations, and procedures.
- Check baggage or cargo to ensure that it has been loaded correctly.
- Obtain and review data such as load weights, fuel supplies, weather conditions, and flight schedules to determine flight plans and identify needed changes.
- Conduct in-flight tests and evaluations at specified altitudes and in all types of weather to determine the receptivity and other characteristics of equipment and systems.
- Choose routes, altitudes, and speeds that will provide the fastest, safest, and smoothest flights.
- Write specified information in flight records, such as flight times, altitudes flown, and fuel consumption.
- Coordinate flight activities with ground crews and air traffic control, and inform crew members of flight and test procedures.
- Perform minor aircraft maintenance and repair work, or arrange for major maintenance.
- Supervise other crew members.
- Request changes in altitudes or routes as circumstances dictate.
- File instrument flight plans with air traffic control so that flights can be coordinated with other air traffic.
- Instruct other pilots and student pilots in aircraft operations.
- Fly with other pilots or pilot-license applicants to evaluate their proficiency.
- Plan and formulate flight activities and test schedules and prepare flight evaluation reports.
- Teach company regulations and procedures to other pilots.
- Operate large scale uncrewed aerial vehicles (UAVs) or drones for various commercial purposes, such as aerial photography, surveying land and structures, or monitoring wildlife.
- Rescue and evacuate injured persons.
- Help direct rescue or firefighting operations in the event of a fire or an explosion.
- Evaluate situations or make determinations when a worker has refused to work on the grounds that danger or potential harm exists.
- Supply, operate, or maintain personal protective equipment.
- Train workers in safety procedures related to green jobs, such as the use of fall protection devices or maintenance of proper ventilation during wind turbine construction.
- Test workplaces for environmental hazards, such as exposure to radiation, chemical or biological hazards, or excessive noise.
- Maintain all required environmental records and documentation.
- Provide consultation to organizations or agencies on the workplace application of safety principles, practices, or techniques.
- Inspect fire suppression systems or portable fire systems to ensure proper working order.
- Verify availability or monitor use of safety equipment, such as hearing protection or respirators.
- Recommend corrective measures to be applied based on results of environmental contaminant analyses.
- Prepare or review specifications or orders for the purchase of safety equipment, ensuring that proper features are present and that items conform to health and safety standards.
- Prepare or calibrate equipment used to collect or analyze samples.
- Conduct worker studies to determine whether specific instances of disease or illness are job-related.
- Plan emergency response drills.
- Examine credentials, licenses, or permits to ensure compliance with licensing requirements.
- Review records or reports concerning laboratory results, staffing, floor plans, fire inspections, or sanitation to gather information for the development or enforcement of safety activities.
- Educate the public about health issues or enforce health legislation to prevent disease, to promote health, or to help people understand health protection procedures and regulations.
- Prepare documents to be used in legal proceedings, testifying in such proceedings when necessary.
- Collect data regarding potential hazards from new equipment or products linked to green practices.
- Maintain logbooks of daily activities, including areas visited or activities performed.
- Test or balance newly installed HVAC systems to determine whether indoor air quality standards are met.
- Confer with schools, state authorities, or community groups to develop health standards or programs.
- Collect data related to ecological or human health risks at brownfield sites.
- Conduct interviews to obtain information or evidence regarding communicable diseases or violations of health or sanitation regulations.
- Perform tests to identify any potential hazards related to recycled products used at green building sites.
- Examine practices at green building sites to determine whether adherence to green building standards alters risks to workers.
- Help direct rescue or firefighting operations in the event of a fire or an explosion.
- Lower and man lifeboats when emergencies occur.
- Tie barges together into tow units for tugboats to handle, inspecting barges periodically during voyages and disconnecting them when destinations are reached.
- Attach hoses and operate pumps to transfer substances to and from liquid cargo tanks.
- Handle lines to moor vessels to wharfs, to tie up vessels to other vessels, or to rig towing lines.
- Read pressure and temperature gauges or displays and record data in engineering logs.
- Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate navigational aids, such as buoys or lighthouses.
- Maintain government-issued certifications, as required.
- Examine machinery to verify specified pressures or lubricant flows.
- Maintain a ship's engines under the direction of the ship's engineering officers.
- Break out, rig, and stow cargo-handling gear, stationary rigging, or running gear.
- Lubricate machinery, equipment, or engine parts, such as gears, shafts, or bearings.
- Sweep, mop, and wash down decks to remove oil, dirt, and debris, using brooms, mops, brushes, and hoses.
- Splice and repair ropes, wire cables, or cordage, using marlinespikes, wire cutters, twine, and hand tools.
- Load or unload materials, vehicles, or passengers from vessels.
- Chip and clean rust spots on decks, superstructures, or sides of ships, using wire brushes and hand or air chipping machines.
- Provide engineers with assistance in repairing or adjusting machinery.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Paint or varnish decks, superstructures, lifeboats, or sides of ships.
- Give directions to crew members engaged in cleaning wheelhouses or quarterdecks.
- Stand by wheels when ships are on automatic pilot, and verify accuracy of courses, using magnetic compasses.
- Steer ships under the direction of commanders or navigating officers or direct helmsmen to steer, following designated courses.
- Relay specified signals to other ships, using visual signaling devices, such as blinker lights or semaphores.
- Overhaul lifeboats or lifeboat gear and lower or raise lifeboats with winches or falls.
- Stand gangway watches to prevent unauthorized persons from boarding ships while in port.
- Record data in ships' logs, such as weather conditions or distances traveled.
- Measure depth of water in shallow or unfamiliar waters, using leadlines, and telephone or shout depth information to vessel bridges.
- Clean and polish wood trim, brass, or other metal parts.
- Participate in shore patrols.
- Lower and man lifeboats when emergencies occur.
- Assist in responding to aircraft and medical emergencies.
- Inspect airfield conditions to ensure compliance with federal regulatory requirements.
- Implement airfield safety procedures to ensure a safe operating environment for personnel and aircraft operation.
- Conduct inspections of the airport property and perimeter to maintain controlled access to airfields.
- Initiate or conduct airport-wide coordination of snow removal on runways and taxiways.
- Manage wildlife on and around airport grounds.
- Coordinate communications between air traffic control and maintenance personnel.
- Perform and supervise airfield management activities, including mobile airfield management functions.
- Plan and coordinate airfield construction.
- Monitor the arrival, parking, refueling, loading, and departure of all aircraft.
- Train operations staff.
- Coordinate with agencies, such as air traffic control, civil engineers, or command posts, to ensure support of airfield management activities.
- Relay departure, arrival, delay, aircraft and airfield status, and other pertinent information to upline controlling agencies.
- Provide aircrews with information and services needed for airfield management and flight planning.
- Coordinate with agencies to meet aircrew requirements for billeting, messing, refueling, ground transportation, and transient aircraft maintenance.
- Use airfield landing and navigational aids and digital data terminal communications equipment to perform duties.
- Receive, transmit, and control message traffic.
- Maintain air-to-ground and point-to-point radio contact with aircraft commanders.
- Procure, produce, and provide information on the safe operation of aircraft, such as flight planning publications, operations publications, charts and maps, or weather information.
- Anticipate aircraft equipment needs for air evacuation and cargo flights.
- Post visual display boards and status boards.
- Receive and post weather information and flight plan data, such as air routes or arrival and departure times.
- Conduct departure and arrival briefings.
- Collaborate with others to plan flight schedules and air crew assignments.
- Maintain flight and event logs, air crew flying records, and flight operations records of incoming and outgoing flights.
- Coordinate changes to flight itineraries with appropriate Air Traffic Control (ATC) agencies.
- Check military flight plans with civilian agencies.
- Issue notices to advise flight crews of airfield status.
- Monitor and manage the operation of drones within the airport airspace to ensure safe aircraft operations.
- Assist in responding to aircraft and medical emergencies.
- Provide assistance in maritime rescue operations.
- Direct courses and speeds of ships, based on specialized knowledge of local winds, weather, water depths, tides, currents, and hazards.
- Prevent ships under navigational control from engaging in unsafe operations.
- Serve as a vessel's docking master upon arrival at a port or at a berth.
- Consult maps, charts, weather reports, or navigation equipment to determine and direct ship movements.
- Steer and operate vessels, using radios, depth finders, radars, lights, buoys, or lighthouses.
- Operate ship-to-shore radios to exchange information needed for ship operations.
- Dock or undock vessels, sometimes maneuvering through narrow spaces, such as locks.
- Stand watches on vessels during specified periods while vessels are under way.
- Inspect vessels to ensure efficient and safe operation of vessels and equipment and conformance to regulations.
- Read gauges to verify sufficient levels of hydraulic fluid, air pressure, or oxygen.
- Report to appropriate authorities any violations of federal or state pilotage laws.
- Signal passing vessels, using whistles, flashing lights, flags, or radios.
- Measure depths of water, using depth-measuring equipment.
- Signal crew members or deckhands to rig tow lines, open or close gates or ramps, or pull guard chains across entries.
- Maintain boats or equipment on board, such as engines, winches, navigational systems, fire extinguishers, or life preservers.
- Maintain records of daily activities, personnel reports, ship positions and movements, ports of call, weather and sea conditions, pollution control efforts, or cargo or passenger status.
- Advise ships' masters on harbor rules and customs procedures.
- Observe loading or unloading of cargo or equipment to ensure that handling and storage are performed according to specifications.
- Calculate sightings of land, using electronic sounding devices and following contour lines on charts.
- Learn to operate new technology systems and procedures through instruction, simulators, or models.
- Direct or coordinate crew members or workers performing activities such as loading or unloading cargo, steering vessels, operating engines, or operating, maintaining, or repairing ship equipment.
- Arrange for ships to be fueled, restocked with supplies, or repaired.
- Supervise crews in cleaning or maintaining decks, superstructures, or bridges.
- Purchase supplies or equipment.
- Tow and maneuver barges or signal tugboats to tow barges to destinations.
- Perform various marine duties, such as checking for oil spills or other pollutants around ports or harbors or patrolling beaches.
- Assign watches or living quarters to crew members.
- Interview and hire crew members.
- Conduct safety drills such as man overboard or fire drills.
- Oversee the use of drones for inspection and maintenance of hard-to-reach parts of the vessel.
- Provide assistance in maritime rescue operations.
