- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
Occupations with related tasks Save Table: XLSX CSV
- Prepare trucks and equipment necessary for the type of pumping service required.
- Monitor pumps and flow lines for gas and fluid leaks.
- Gauge oil and gas production.
- Start compressor engines and divert oil from storage tanks into compressor units and auxiliary equipment to recover natural gas from oil.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Operate engines and pumps to shut off wells according to production schedules, and to switch flow of oil into storage tanks.
- Repair gas and oil meters and gauges.
- Perform routine maintenance on vehicles and equipment.
- Open valves to return compressed gas to bottoms of specified wells to repressurize them and force oil to surface.
- Change water filters.
- Attach pumps and hoses to wellheads.
- Mix acids, chemicals, or dry cement as required for a specific job.
- Unload and assemble pipes and pumping equipment, using hand tools.
- Supervise oil pumpers and other workers engaged in producing oil from wells.
- Conduct regular inspections of equipment using drones or other advanced technology.
- Prepare trucks and equipment necessary for the type of pumping service required.
- Set up and conduct chemical experiments, tests, and analyses, using techniques such as chromatography, spectroscopy, physical or chemical separation techniques, or microscopy.
- Conduct chemical or physical laboratory tests to assist scientists in making qualitative or quantitative analyses of solids, liquids, or gaseous materials.
- Maintain, clean, or sterilize laboratory instruments or equipment.
- Monitor product quality to ensure compliance with standards and specifications.
- Prepare chemical solutions for products or processes, following standardized formulas, or create experimental formulas.
- Compile and interpret results of tests and analyses.
- Provide and maintain a safe work environment by participating in safety programs, committees, or teams and by conducting laboratory or plant safety audits.
- Provide technical support or assistance to chemists or engineers.
- Develop or conduct programs of sampling and analysis to maintain quality standards of raw materials, chemical intermediates, or products.
- Train new employees on topics such as the proper operation of laboratory equipment.
- Write technical reports or prepare graphs or charts to document experimental results.
- Order and inventory materials to maintain supplies.
- Operate experimental pilot plants, assisting with experimental design.
- Direct or monitor other workers producing chemical products.
- Design or fabricate experimental apparatus to develop new products or processes.
- Develop new chemical engineering processes or production techniques.
- Set up and conduct chemical experiments, tests, and analyses, using techniques such as chromatography, spectroscopy, physical or chemical separation techniques, or microscopy.
- Set up, adjust, calibrate, clean, maintain, and troubleshoot laboratory and field equipment.
- Conduct research, or assist in the conduct of research, including the collection of information and samples, such as blood, water, soil, plants and animals.
- Use computers, computer-interfaced equipment, robotics or high-technology industrial applications to perform work duties.
- Monitor and observe experiments, recording production and test data for evaluation by research personnel.
- Analyze experimental data and interpret results to write reports and summaries of findings.
- Provide technical support and services for scientists and engineers working in fields such as agriculture, environmental science, resource management, biology, and health sciences.
- Keep detailed logs of all work-related activities.
- Input data into databases.
- Isolate, identify and prepare specimens for examination.
- Clean, maintain and prepare supplies and work areas.
- Monitor laboratory work to ensure compliance with set standards.
- Place orders for laboratory equipment and supplies.
- Participate in the research, development, or manufacturing of medicinal and pharmaceutical preparations.
- Feed livestock or laboratory animals.
- Conduct standardized biological, microbiological or biochemical tests and laboratory analyses to evaluate the quantity or quality of physical or chemical substances in food or other products.
- Examine animals and specimens to detect the presence of disease or other problems.
- Measure or weigh compounds and solutions for use in testing or animal feed.
- Set up, adjust, calibrate, clean, maintain, and troubleshoot laboratory and field equipment.
- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
- Brief workers on radiation levels in work areas.
- Calculate safe radiation exposure times for personnel using plant contamination readings and prescribed safe levels of radiation.
- Monitor personnel to determine the amounts and intensities of radiation exposure.
- Inform supervisors when individual exposures or area radiation levels approach maximum permissible limits.
- Provide initial response to abnormal events or to alarms from radiation monitoring equipment.
- Determine intensities and types of radiation in work areas, equipment, or materials, using radiation detectors or other instruments.
- Instruct personnel in radiation safety procedures and demonstrate use of protective clothing and equipment.
- Collect samples of air, water, gases, or solids to determine radioactivity levels of contamination.
- Analyze samples, such as air or water samples, for contaminants or other elements.
- Determine or recommend radioactive decontamination procedures, according to the size and nature of equipment and the degree of contamination.
- Prepare reports describing contamination tests, material or equipment decontaminated, or methods used in decontamination processes.
- Place radioactive waste, such as sweepings or broken sample bottles, into containers for shipping or disposal.
- Decontaminate objects by cleaning with soap or solvents or by abrading with wire brushes, buffing wheels, or sandblasting machines.
- Enter data into computers to record characteristics of nuclear events or to locate coordinates of particles.
- Calibrate and maintain chemical instrumentation sensing elements and sampling system equipment, using calibration instruments and hand tools.
- Document results from radiation and contamination surveys.
- Inspect, test, and maintain respiratory protection equipment.
- Write radiological work permits.
- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
- Design or build laboratory equipment needed for special research projects.
- Share research findings by writing scientific articles or by making presentations at scientific conferences.
- Teach or advise undergraduate or graduate students or supervise their research.
- Study physical principles of living cells or organisms and their electrical or mechanical energy, applying methods and knowledge of mathematics, physics, chemistry, or biology.
- Manage laboratory teams or monitor the quality of a team's work.
- Develop new methods to study the mechanisms of biological processes.
- Write grant proposals to obtain funding for research.
- Design or perform experiments with equipment, such as lasers, accelerators, or mass spectrometers.
- Determine the three-dimensional structure of biological macromolecules.
- Prepare reports or recommendations, based upon research outcomes.
- Study spatial configurations of submicroscopic molecules, such as proteins, using x-rays or electron microscopes.
- Study the chemistry of living processes, such as cell development, breathing and digestion, or living energy changes, such as growth, aging, or death.
- Study the mutations in organisms that lead to cancer or other diseases.
- Research the chemical effects of substances, such as drugs, serums, hormones, or food, on tissues or vital processes.
- Research transformations of substances in cells, using atomic isotopes.
- Develop or execute tests to detect diseases, genetic disorders, or other abnormalities.
- Develop or test new drugs or medications intended for commercial distribution.
- Isolate, analyze, or synthesize vitamins, hormones, allergens, minerals, or enzymes and determine their effects on body functions.
- Examine the molecular or chemical aspects of immune system functioning.
- Research how characteristics of plants or animals are carried through successive generations.
- Prepare pharmaceutical compounds for commercial distribution.
- Develop methods to process, store, or use foods, drugs, or chemical compounds.
- Investigate the nature, composition, or expression of genes or research how genetic engineering can impact these processes.
- Produce pharmaceutically or industrially useful proteins, using recombinant DNA technology.
- Analyze biochemical or biophysical data.
- Design or build laboratory equipment needed for special research projects.
- Set up equipment or stations to monitor and collect pollutants from sites, such as smoke stacks, manufacturing plants, or mechanical equipment.
- Collect samples of gases, soils, water, industrial wastewater, or asbestos products to conduct tests on pollutant levels or identify sources of pollution.
- Investigate hazardous conditions or spills or outbreaks of disease or food poisoning, collecting samples for analysis.
- Record test data and prepare reports, summaries, or charts that interpret test results.
- Prepare samples or photomicrographs for testing and analysis.
- Discuss test results and analyses with customers.
- Inspect workplaces to ensure the absence of health and safety hazards, such as high noise levels, radiation, or potential lighting hazards.
- Weigh, analyze, or measure collected sample particles, such as lead, coal dust, or rock, to determine concentration of pollutants.
- Calibrate microscopes or test instruments.
- Provide information or technical or program assistance to government representatives, employers, or the general public on the issues of public health, environmental protection, or workplace safety.
- Maintain files, such as hazardous waste databases, chemical usage data, personnel exposure information, or diagrams showing equipment locations.
- Develop or implement programs for monitoring of environmental pollution or radiation.
- Monitor emission control devices to ensure they are operating properly and comply with state and federal regulations.
- Make recommendations to control or eliminate unsafe conditions at workplaces or public facilities.
- Calculate amount of pollutant in samples or compute air pollution or gas flow in industrial processes, using chemical and mathematical formulas.
- Develop testing procedures.
- Perform statistical analysis of environmental data.
- Develop or implement site recycling or hazardous waste stream programs.
- Direct activities of workers in laboratory.
- Analyze potential environmental impacts of production process changes, and recommend steps to mitigate negative impacts.
- Initiate procedures to close down or fine establishments violating environmental or health regulations.
- Inspect sanitary conditions at public facilities.
- Determine amounts and kinds of chemicals to use in destroying harmful organisms or removing impurities from purification systems.
- Examine and analyze material for presence and concentration of contaminants, such as asbestos, using variety of microscopes.
- Distribute permits, closure plans, or cleanup plans.
- Set up equipment or stations to monitor and collect pollutants from sites, such as smoke stacks, manufacturing plants, or mechanical equipment.
- Set up or maintain remote sensing data collection systems.
- Manage or analyze data obtained from remote sensing systems to obtain meaningful results.
- Analyze data acquired from aircraft, satellites, or ground-based platforms, using statistical analysis software, image analysis software, or Geographic Information Systems (GIS).
- Integrate other geospatial data sources into projects.
- Organize and maintain geospatial data and associated documentation.
- Compile and format image data to increase its usefulness.
- Prepare or deliver reports or presentations of geospatial project information.
- Discuss project goals, equipment requirements, or methodologies with colleagues or team members.
- Process aerial or satellite imagery to create products such as land cover maps.
- Design or implement strategies for collection, analysis, or display of geographic data.
- Develop or build databases for remote sensing or related geospatial project information.
- Collect supporting data, such as climatic or field survey data, to corroborate remote sensing data analyses.
- Monitor quality of remote sensing data collection operations to determine if procedural or equipment changes are necessary.
- Train technicians in the use of remote sensing technology.
- Direct all activity associated with implementation, operation, or enhancement of remote sensing hardware or software.
- Attend meetings or seminars or read current literature to maintain knowledge of developments in the field of remote sensing.
- Conduct research into the application or enhancement of remote sensing technology.
- Recommend new remote sensing hardware or software acquisitions.
- Use remote sensing data for forest or carbon tracking activities to assess the impact of environmental change.
- Develop automated routines to correct for the presence of image distorting artifacts, such as ground vegetation.
- Develop new analytical techniques or sensor systems.
- Participate in fieldwork.
- Apply remote sensing data or techniques, such as surface water modeling or dust cloud detection, to address environmental issues.
- Direct installation or testing of new remote sensing hardware or software.
- Develop protocols and procedures for planning and executing drone-based remote sensing missions to ensure they comply with standards and requirements.
- Set up or maintain remote sensing data collection systems.
- Set up laboratory or field equipment as required for site testing.
- Prepare land for cultivated crops, orchards, or vineyards by plowing, discing, leveling, or contouring.
- Operate farm machinery, including tractors, plows, mowers, combines, balers, sprayers, earthmoving equipment, or trucks.
- Record data pertaining to experimentation, research, or animal care.
- Maintain or repair agricultural facilities, equipment, or tools to ensure operational readiness, safety, and cleanliness.
- Perform crop production duties, such as tilling, hoeing, pruning, weeding, or harvesting crops.
- Collect animal or crop samples.
- Examine animals or crop specimens to determine the presence of diseases or other problems.
- Supervise or train agricultural technicians or farm laborers.
- Conduct studies of nitrogen or alternative fertilizer application methods, quantities, or timing to ensure satisfaction of crop needs and minimization of leaching, runoff, or denitrification.
- Prepare laboratory samples for analysis, following proper protocols to ensure that they will be stored, prepared, and disposed of efficiently and effectively.
- Measure or weigh ingredients used in laboratory testing.
- Perform tests on seeds to evaluate seed viability.
- Prepare data summaries, reports, or analyses that include results, charts, or graphs to document research findings and results.
- Perform laboratory or field testing, using spectrometers, nitrogen determination apparatus, air samplers, centrifuges, or potential hydrogen (pH) meters to perform tests.
- Supervise pest or weed control operations, including locating and identifying pests or weeds, selecting chemicals and application methods, or scheduling application.
- Devise cultural methods or environmental controls for plants for which guidelines are sketchy or nonexistent.
- Conduct insect or plant disease surveys.
- Perform general nursery duties, such as propagating standard varieties of plant materials, collecting and germinating seeds, maintaining cuttings of plants, or controlling environmental conditions.
- Record environmental data from field samples of soil, air, water, or pests to monitor the effectiveness of integrated pest management (IPM) practices.
- Determine the germination rates of seeds planted in specified areas.
- Transplant trees, vegetables, or horticultural plants.
- Prepare culture media, following standard procedures.
- Respond to general inquiries or requests from the public.
- Prepare or present agricultural demonstrations.
- Assess comparative soil erosion from various planting or tillage systems, such as conservation tillage with mulch or ridge till systems, no-till systems, or conventional tillage systems with or without moldboard plows.
- Set up laboratory or field equipment as required for site testing.
- Set up or direct set-up of instruments used to collect geological data.
- Test and analyze samples to determine their content and characteristics, using laboratory apparatus or testing equipment.
- Collect or prepare solid or fluid samples for analysis.
- Compile, log, or record testing or operational data for review and further analysis.
- Prepare notes, sketches, geological maps, or cross-sections.
- Participate in geological, geophysical, geochemical, hydrographic, or oceanographic surveys, prospecting field trips, exploratory drilling, well logging, or underground mine survey programs.
- Prepare or review professional, technical, or other reports regarding sampling, testing, or recommendations of data analysis.
- Adjust or repair testing, electrical, or mechanical equipment or devices.
- Read and study reports in order to compile information and data for geological and geophysical prospecting.
- Interview individuals, and research public databases in order to obtain information.
- Plot information from aerial photographs, well logs, section descriptions, or other databases.
- Assemble, maintain, or distribute information for library or record systems.
- Operate or adjust equipment or apparatus used to obtain geological data.
- Plan and direct activities of workers who operate equipment to collect data.
- Record readings in order to compile data used in prospecting for oil or gas.
- Create photographic recordings of information, using equipment.
- Measure geological characteristics used in prospecting for oil or gas, using measuring instruments.
- Participate in the evaluation of possible mining locations.
- Assess the environmental impacts of development projects on subsurface materials.
- Evaluate and interpret core samples and cuttings, and other geological data used in prospecting for oil or gas.
- Supervise well exploration, drilling activities, or well completions.
- Inspect engines for wear or defective parts, using equipment or measuring devices.
- Collaborate with hydrogeologists to evaluate groundwater or well circulation.
- Apply new technologies, such as improved seismic imaging techniques, to locate untapped oil or natural gas deposits.
- Collect data on underground areas, such as reservoirs, that could be used in carbon sequestration operations.
- Collect geological data from potential geothermal energy plant sites.
- Compile data used to address environmental issues, such as the suitability of potential landfill sites.
- Conduct geophysical surveys of potential sites for wind farms or solar installations to determine their suitability.
- Evaluate and interpret seismic data with the aid of computers.
- Set up or direct set-up of instruments used to collect geological data.
