- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 2 | 2 | 1-2 | 51-9196.00 | Paper Goods Machine Setters, Operators, and Tenders |
| 1 | 4 | 1-2 | 51-8093.00 | Petroleum Pump System Operators, Refinery Operators, and Gaugers |
| 1 | 4 | 3 | 51-8021.00 | Stationary Engineers and Boiler Operators |
| 1 | 3 | 3 | 51-8011.00 | Nuclear Power Reactor Operators |
| 1 | 3 | 1-2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 1-2 | 51-9161.00 | Computer Numerically Controlled Tool Operators |
| 1 | 2 | 1-2 | 51-4051.00 | Metal-Refining Furnace Operators and Tenders |
| 1 | 2 | 1-2 | 51-9191.00 | Adhesive Bonding Machine Operators and Tenders |
| 1 | 2 | 1-2 | 51-6091.00 | Extruding and Forming Machine Setters, Operators, and Tenders, Synthetic and Glass Fibers |
| 1 | 2 | 1-2 | 51-3093.00 | Food Cooking Machine Operators and Tenders |
| 1 | 2 | 1-2 | 51-3091.00 | Food and Tobacco Roasting, Baking, and Drying Machine Operators and Tenders |
| 1 | 2 | 1-2 | 51-9111.00 | Packaging and Filling Machine Operators and Tenders 
|
| 1 | 2 | 1-2 | 51-6064.00 | Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders |
| 1 | 2 | 1-2 | 51-9011.00 | Chemical Equipment Operators and Tenders |
| 1 | 2 | 1-2 | 51-3092.00 | Food Batchmakers
|
| 1 | 2 | 1-2 | 51-8013.00 | Power Plant Operators |
| 1 | 2 | 1-2 | 51-4121.00 | Welders, Cutters, Solderers, and Brazers |
| 1 | 1 | 1-2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-4194.00 | Tool Grinders, Filers, and Sharpeners |
| 1 | 1 | 1-2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-5113.00 | Print Binding and Finishing Workers |
| 1 | 1 | 1-2 | 51-6031.00 | Sewing Machine Operators |
| 1 | 1 | 1-2 | 51-9151.00 | Photographic Process Workers and Processing Machine Operators |
| 1 | 1 | 1-2 | 51-9198.00 | Helpers--Production Workers |
- Observe operation of various machines to detect and correct machine malfunctions such as improper forming, glue flow, or pasteboard tension.
- Monitor finished cartons as they drop from forming machines into rotating hoppers and into gravity feed chutes to prevent jamming.
- Examine completed work to detect defects and verify conformance to work orders, and adjust machinery as necessary to correct production problems.
- Start machines and move controls to regulate tension on pressure rolls, to synchronize speed of machine components, and to adjust temperatures of glue or paraffin.
- Disassemble machines to maintain, repair, or replace broken or worn parts, using hand or power tools.
- Install attachments to machines for gluing, folding, printing, or cutting.
- Cut products to specified dimensions, using hand or power cutters.
- Place rolls of paper or cardboard on machine feed tracks, and thread paper through gluing, coating, and slitting rollers.
- Adjust guide assemblies, forming bars, and folding mechanisms according to specifications, using hand tools.
- Measure, space, and set saw blades, cutters, and perforators, according to product specifications.
- Fill glue and paraffin reservoirs, and position rollers to dispense glue onto paperboard.
- Stamp products with information such as dates, using hand stamps or automatic stamping devices.
- Remove finished cores, and stack or place them on conveyors for transfer to other work areas.
- Lift tote boxes of finished cartons, and dump cartons into feed hoppers.
- Observe operation of various machines to detect and correct machine malfunctions such as improper forming, glue flow, or pasteboard tension.
- Monitor finished cartons as they drop from forming machines into rotating hoppers and into gravity feed chutes to prevent jamming.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Calculate test result values, using standard formulas.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Clamp seals around valves to secure tanks.
- Coordinate shutdowns and major projects.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Lower thermometers into tanks to obtain temperature readings.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
- Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
- Develop operation, safety, and maintenance procedures or assist in their development.
- Test electrical systems to determine voltages, using voltage meters.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Weigh, measure, and record fuel used.
- Receive instructions from steam engineers regarding steam plant and air compressor operations.
- Install burners and auxiliary equipment, using hand tools.
- Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
- Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
- Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
- Investigate and report on accidents.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Ignite fuel in burners, using torches or flames.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Develop or implement actions such as lockouts, tagouts, or clearances to allow equipment to be safely repaired.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Record operating data, such as the results of surveillance tests.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Dispatch orders or instructions to personnel through radiotelephone or intercommunication systems to coordinate auxiliary equipment operation.
- Review and edit standard operating procedures.
- Conduct inspections or operations outside of control rooms as necessary.
- Direct reactor operators in emergency situations, in accordance with emergency operating procedures.
- Authorize maintenance activities on units or changes in equipment or system operational status.
- Supervise technicians' work activities to ensure that equipment is operated in accordance with policies and procedures that protect workers from radiation and ensure environmental safety.
- Authorize actions to correct identified operational inefficiencies or hazards so that operating efficiency is maximized and potential environmental issues are minimized.
- Direct the collection and testing of air, water, gas, or solid samples to determine radioactivity levels or to ensure appropriate radioactive containment.
- Direct measurement of the intensity or types of radiation in work areas, equipment, or materials.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Implement changes to machine programs, and enter new specifications, using computers.
- Calculate machine speed and feed ratios and the size and position of cuts.
- Transfer commands from servers to computer numerical control (CNC) modules, using computer network links.
- Remove and replace dull cutting tools.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Maintain machines and remove and replace broken or worn machine tools, using hand tools.
- Insert control instructions into machine control units to start operation.
- Modify cutting programs to account for problems encountered during operation, and save modified programs.
- Write simple programs for computer-controlled machine tools.
- Lift workpieces to machines manually or with hoists or cranes.
- Input initial part dimensions into machine control panels.
- Set up future jobs while machines are operating.
- Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production.
- Stack or load finished items, or place items on conveyor systems.
- Control coolant systems.
- Clean machines, tooling, or parts, using solvents or solutions and rags.
- Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
- Lay out and mark areas of parts to be shot peened and fill hoppers with shot.
- Examine electronic components for defects or completeness of laser-beam trimming, using microscopes.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Draw smelted metal samples from furnaces or kettles for analysis, and calculate types and amounts of materials needed to ensure that materials meet specifications.
- Weigh materials to be charged into furnaces, using scales.
- Record production data, and maintain production logs.
- Operate controls to move or discharge metal workpieces from furnaces.
- Inspect furnaces and equipment to locate defects and wear.
- Drain, transfer, or remove molten metal from furnaces, and place it into molds, using hoists, pumps, or ladles.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Prepare material to load into furnaces, including cleaning, crushing, or applying chemicals, by using crushing machines, shovels, rakes, or sprayers.
- Remove impurities from the surface of molten metal, using strainers.
- Sprinkle chemicals over molten metal to bring impurities to the surface.
- Direct work crews in the cleaning and repair of furnace walls and flooring.
- Scrape accumulations of metal oxides from floors, molds, and crucibles, and sift and store them for reclamation.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Observe gauges, meters, and control panels to obtain information about equipment temperatures and pressures, or the speed of feeders or conveyors.
- Align and position materials being joined to ensure accurate application of adhesive or heat sealing.
- Adjust machine components according to specifications such as widths, lengths, and thickness of materials and amounts of glue, cement, or adhesive required.
- Start machines, and turn valves or move controls to feed, admit, apply, or transfer materials and adhesives, and to adjust temperature, pressure, and time settings.
- Fill machines with glue, cement, or adhesives.
- Perform test production runs and make adjustments as necessary to ensure that completed products meet standards and specifications.
- Examine and measure completed materials or products to verify conformance to specifications, using measuring devices such as tape measures, gauges, or calipers.
- Read work orders and communicate with coworkers to determine machine and equipment settings and adjustments and supply and product specifications.
- Remove and stack completed materials or products, and restock materials to be joined.
- Maintain production records such as quantities, dimensions, and thicknesses of materials processed.
- Remove jammed materials from machines and readjust components as necessary to resume normal operations.
- Mount or load material such as paper, plastic, wood, or rubber in feeding mechanisms of cementing or gluing machines.
- Transport materials, supplies, and finished products between storage and work areas, using forklifts.
- Clean and maintain gluing and cementing machines, using solutions, lubricants, brushes, and scrapers.
- Measure and mix ingredients to prepare glue.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Observe gauges, meters, and control panels to obtain information about equipment temperatures and pressures, or the speed of feeders or conveyors.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.
- Press buttons to stop machines when processes are complete or when malfunctions are detected.
- Notify other workers of defects, and direct them to adjust extruding and forming machines.
- Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.
- Move controls to activate and adjust extruding and forming machines.
- Record details of machine malfunctions.
- Clean and maintain extruding and forming machines, using hand tools.
- Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.
- Remove polymer deposits from spinnerettes and equipment, using silicone spray, brass chisels, and bronze-wool pads.
- Press metering-pump buttons and turn valves to stop flow of polymers.
- Record operational data on tags, and attach tags to machines.
- Remove excess, entangled, or completed filaments from machines, using hand tools.
- Wipe finish rollers with cloths and wash finish trays with water when necessary.
- Lower pans inside cabinets to catch molten filaments until flow of polymer through packs has stopped.
- Open cabinet doors to cut multifilament threadlines away from guides, using scissors.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Listen for malfunction alarms, and shut down equipment and notify supervisors when necessary.
- Observe gauges, dials, and product characteristics, and adjust controls to maintain appropriate temperature, pressure, and flow of ingredients.
- Clean, wash, and sterilize equipment and cooking area, using water hoses, cleaning or sterilizing solutions, or rinses.
- Read work orders, recipes, or formulas to determine cooking times and temperatures, and ingredient specifications.
- Measure or weigh ingredients, using scales or measuring containers.
- Tend or operate and control equipment, such as kettles, cookers, vats and tanks, and boilers, to cook ingredients or prepare products for further processing.
- Record production and test data, such as processing steps, temperature and steam readings, cooking time, batches processed, and test results.
- Set temperature, pressure, and time controls, and start conveyers, machines, or pumps.
- Remove cooked material or products from equipment.
- Collect and examine product samples during production to test them for quality, color, content, consistency, viscosity, acidity, or specific gravity.
- Pour, dump, or load prescribed quantities of ingredients or products into cooking equipment, manually or using a hoist.
- Notify or signal other workers to operate equipment or when processing is complete.
- Turn valves or start pumps to add ingredients or drain products from equipment and to transfer products for storage, cooling, or further processing.
- Admit required amounts of water, steam, cooking oils, or compressed air into equipment, such as by opening water valves to cool mixtures to the desired consistency.
- Activate agitators and paddles to mix or stir ingredients, stopping machines when ingredients are thoroughly mixed.
- Operate auxiliary machines and equipment, such as grinders, canners, and molding presses, to prepare or further process products.
- Place products on conveyors or carts, and monitor product flow.
- Listen for malfunction alarms, and shut down equipment and notify supervisors when necessary.
- Observe gauges, dials, and product characteristics, and adjust controls to maintain appropriate temperature, pressure, and flow of ingredients.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Observe, feel, taste, or otherwise examine products during and after processing to ensure conformance to standards.
- Set temperature and time controls, light ovens, burners, driers, or roasters, and start equipment, such as conveyors, cylinders, blowers, driers, or pumps.
- Record production data, such as weight and amount of product processed, type of product, and time and temperature of processing.
- Weigh or measure products, using scale hoppers or scale conveyors.
- Operate or tend equipment that roasts, bakes, dries, or cures food items such as cocoa and coffee beans, grains, nuts, and bakery products.
- Signal coworkers to synchronize flow of materials.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Fill or remove product from trays, carts, hoppers, or equipment, using scoops, peels, or shovels, or by hand.
- Take product samples during or after processing for laboratory analyses.
- Test products for moisture content, using moisture meters.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Open valves, gates, or chutes or use shovels to load or remove products from ovens or other equipment.
- Clean equipment with steam, hot water, and hoses.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Monitor the production line, watching for problems such as pile-ups, jams, or glue that isn't sticking properly.
- Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
- Attach identification labels to finished packaged items, or cut stencils and stencil information on containers, such as lot numbers or shipping destinations.
- Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications.
- Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
- Remove finished packaged items from machine and separate rejected items.
- Inspect and remove defective products and packaging material.
- Start machine by engaging controls.
- Tend or operate machine that packages product.
- Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.
- Regulate machine flow, speed, or temperature.
- Adjust machine components and machine tension and pressure according to size or processing angle of product.
- Supply materials to spindles, conveyors, hoppers, or other feeding devices and unload packaged product.
- Stack finished packaged items, or wrap protective material around each item, and pack the items in cartons or containers.
- Package the product in the form in which it will be sent out, for example, filling bags with flour from a chute or spout.
- Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels.
- Count and record finished and rejected packaged items.
- Clean packaging containers, line and pad crates, or assemble cartons to prepare for product packing.
- Secure finished packaged items by hand tying, sewing, gluing, stapling, or attaching fastener.
- Clean and remove damaged or otherwise inferior materials to prepare raw products for processing.
- Monitor the production line, watching for problems such as pile-ups, jams, or glue that isn't sticking properly.
- Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Notify supervisors or mechanics of equipment malfunctions.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Start machines, monitor operation, and make adjustments as needed.
- Inspect machinery to determine whether repairs are needed.
- Record production data such as numbers and types of bobbins wound.
- Replace depleted supply packages with full packages.
- Stop machines when specified amount of products has been produced.
- Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.
- Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
- Adjust machine settings such as speed or tension to produce products that meet specifications.
- Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Tend spinning frames that draw out and twist roving or sliver into yarn.
- Remove spindles from machines and bobbins from spindles.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.
- Repair or replace worn or defective parts or components, using hand tools.
- Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions.
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained.
- Observe safety precautions to prevent fires or explosions.
- Record operational data, such as temperatures, pressures, ingredients used, processing times, or test results.
- Control or operate equipment in which chemical changes or reactions take place during the processing of industrial or consumer products.
- Draw samples of products at specified stages so that analyses can be performed.
- Adjust controls to regulate temperature, pressure, feed, or flow of liquids or gases and times of prescribed reactions, according to knowledge of equipment and processes.
- Test product samples for specific gravity, chemical characteristics, pH levels, concentrations, or viscosities, or send them to laboratories for testing.
- Inspect equipment or units to detect leaks or malfunctions, shutting equipment down, if necessary.
- Open valves or start pumps, agitators, reactors, blowers, or automatic feed of materials.
- Read plant specifications to determine products, ingredients, or prescribed modifications of plant procedures.
- Implement appropriate industrial emergency response procedures.
- Measure, weigh, and mix chemical ingredients, according to specifications.
- Dump or scoop prescribed solid, granular, or powdered materials into equipment.
- Notify maintenance engineers of equipment malfunctions.
- Estimate materials required for production and manufacturing of products.
- Add treating or neutralizing agents to products, and pump products through filters or centrifuges to remove impurities or to precipitate products.
- Observe and compare colors and consistencies of products to instrument readings and to laboratory and standard test results.
- Direct activities of workers assisting in control or verification of processes or in unloading of materials.
- Drain equipment, and pump water or other solutions through to flush and clean tanks or equipment.
- Flush or clean equipment, using steam hoses or mechanical reamers.
- Make minor repairs, lubricate, and maintain equipment, using hand tools.
- Inventory supplies received and consumed.
- Load products into tanks for shipment.
- Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions.
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature.
- Record production and test data for each food product batch, such as the ingredients used, temperature, test results, and time cycle.
- Clean and sterilize vats and factory processing areas.
- Set up, operate, and tend equipment that cooks, mixes, blends, or processes ingredients in the manufacturing of food products, according to formulas or recipes.
- Mix or blend ingredients, according to recipes, using a paddle or an agitator, or by controlling vats that heat and mix ingredients.
- Follow recipes to produce food products of specified flavor, texture, clarity, bouquet, or color.
- Give directions to other workers who are assisting in the batchmaking process.
- Select and measure or weigh ingredients, using English or metric measures and balance scales.
- Press switches and turn knobs to start, adjust, and regulate equipment, such as beaters, extruders, discharge pipes, and salt pumps.
- Determine mixing sequences, based on knowledge of temperature effects and of the solubility of specific ingredients.
- Turn valve controls to start equipment and to adjust operation to maintain product quality.
- Modify cooking and forming operations based on the results of sampling processes, adjusting time cycles and ingredients to achieve desired qualities, such as firmness or texture.
- Examine, feel, and taste product samples during production to evaluate quality, color, texture, flavor, and bouquet, and document the results.
- Test food product samples for moisture content, acidity level, specific gravity, or butter-fat content, and continue processing until desired levels are reached.
- Inspect vats after cleaning to ensure that fermentable residue has been removed.
- Fill processing or cooking containers, such as kettles, rotating cookers, pressure cookers, or vats, with ingredients, by opening valves, by starting pumps or injectors, or by hand.
- Manipulate products, by hand or using machines, to separate, spread, knead, spin, cast, cut, pull, or roll products.
- Cool food product batches on slabs or in water-cooled kettles.
- Place products on carts or conveyors to transfer them to the next stage of processing.
- Homogenize or pasteurize material to prevent separation or to obtain prescribed butterfat content, using a homogenizing device.
- Grade food products according to government regulations or according to type, color, bouquet, and moisture content.
- Operate refining machines to reduce the particle size of cooked batches.
- Formulate or modify recipes for specific kinds of food products.
- Inspect and pack the final product.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Verify that well field monitoring data conforms to applicable regulations.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Weld components in flat, vertical, or overhead positions.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
- Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Hammer out bulges or bends in metal workpieces.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
- Use fire suppression methods in industrial emergencies.
- Preheat workpieces prior to welding or bending, using torches or heating furnaces.
- Set up and use ladders and scaffolding as necessary to complete work.
- Operate metal shaping, straightening, and bending machines, such as brakes and shears.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Observe drilling or boring machine operations to detect any problems.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Change worn cutting tools, using wrenches.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Install tools in spindles.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Observe drilling or boring machine operations to detect any problems.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Inspect, feel, and measure workpieces to ensure that surfaces and dimensions meet specifications.
- Study blueprints or layouts of metal workpieces to determine grinding procedures, and to plan machine setups and operational sequences.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Set up and operate grinding or polishing machines to grind metal workpieces, such as dies, parts, and tools.
- Dress grinding wheels, according to specifications.
- File or finish surfaces of workpieces, using prescribed hand tools.
- Perform basic maintenance, such as cleaning and lubricating machine parts.
- Remove finished workpieces from machines and place them in boxes or on racks, setting aside pieces that are defective.
- Remove and replace worn or broken machine parts, using hand tools.
- Fit parts together in pre-assembly to ensure that dimensions are accurate.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Duplicate workpiece contours, using tracer attachments.
- Inspect dies to detect defects, assess wear, and verify specifications, using micrometers, steel gauge pins, and loupes.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Straighten workpieces and remove dents, using straightening presses and hammers.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Examine stitched, collated, bound, or unbound product samples for defects, such as imperfect bindings, ink spots, torn pages, loose pages, or loose or uncut threads.
- Read work orders to determine instructions and specifications for machine set-up.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Stitch or glue endpapers, bindings, backings, or signatures, using sewing machines, glue machines, or glue and brushes.
- Maintain records, such as daily production records, using specified forms.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Set up or operate bindery machines, such as coil binders, thermal or tape binders, plastic comb binders, or specialty binders.
- Set up or operate machines that perform binding operations, such as pressing, folding, or trimming.
- Prepare finished books for shipping by wrapping or packing books and stacking boxes on pallets.
- Set up or operate glue machines by filling glue reservoirs, turning switches to activate heating elements, or adjusting glue flow or conveyor speed.
- Train workers to set up, operate, and use automatic bindery machines.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Bind new books, using hand tools such as bone folders, knives, hammers, or brass binding tools.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
- Imprint or emboss lettering, designs, or numbers on book covers, using gold, silver, or colored foil, and stamping machines.
- Compress sewed or glued signatures, using hand presses or smashing machines.
- Meet with clients, printers, or designers to discuss job requirements or binding plans.
- Form book bodies by folding and sewing printed sheets to form signatures and assembling signatures in numerical order.
- Design original or special bindings for limited editions or other custom binding projects.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Repair, restore, or rebind old, rare, or damaged books, using hand tools.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Monitor machine operation to detect problems such as defective stitching, breaks in thread, or machine malfunctions.
- Place spools of thread, cord, or other materials on spindles, insert bobbins, and thread ends through machine guides and components.
- Position items under needles, using marks on machines, clamps, templates, or cloth as guides.
- Guide garments or garment parts under machine needles and presser feet to sew parts together.
- Remove holding devices and finished items from machines.
- Match cloth pieces in correct sequences prior to sewing them, and verify that dye lots and patterns match.
- Fold or stretch edges or lengths of items while sewing to facilitate forming specified sections.
- Cut excess material or thread from finished products.
- Select supplies such as fasteners and thread, according to job requirements.
- Examine and measure finished articles to verify conformance to standards, using rulers.
- Start and operate or tend machines, such as single or double needle serging and flat-bed felling machines, to automatically join, reinforce, or decorate material or articles.
- Record quantities of materials processed.
- Turn knobs, screws, and dials to adjust settings of machines, according to garment styles and equipment performance.
- Attach tape, trim, appliques, or elastic to specified garments or garment parts, according to item specifications.
- Repair or alter items by adding replacement parts or missing stitches.
- Perform equipment maintenance tasks such as replacing needles, sanding rough areas of needles, or cleaning and oiling sewing machines.
- Mount attachments, such as needles, cutting blades, or pattern plates, and adjust machine guides according to specifications.
- Cut materials according to specifications, using blades, scissors, or electric knives.
- Inspect garments, and examine repair tags and markings on garments to locate defects or damage, and mark errors as necessary.
- Attach buttons, hooks, zippers, fasteners, or other accessories to fabric, using feeding hoppers or clamp holders.
- Position material or articles in clamps, templates, or hoop frames prior to automatic operation of machines.
- Draw markings or pin appliques on fabric to obtain variations in design.
- Tape or twist together thread or cord to repair breaks.
- Baste edges of material to align and temporarily secure parts for final assembly.
- Position and mark patterns on materials to prepare for sewing.
- Perform specialized or automatic sewing machine functions, such as buttonhole making or tacking.
- Monitor machine operation to detect problems such as defective stitching, breaks in thread, or machine malfunctions.
- Monitor equipment operation to detect malfunctions.
- Select digital images for printing, specify number of images to be printed, and direct to printer, using computer software.
- Create prints according to customer specifications and laboratory protocols.
- Produce color or black-and-white photographs, negatives, or slides, applying standard photographic reproduction techniques and procedures.
- Set or adjust machine controls, according to specifications, type of operation, or material requirements.
- Review computer-processed digital images for quality.
- Operate scanners or related computer equipment to digitize negatives, photographic prints, or other images.
- Fill tanks of processing machines with solutions such as developer, dyes, stop-baths, fixers, bleaches, or washes.
- Measure and mix chemicals to prepare solutions for processing, according to formulas.
- Load digital images onto computers directly from cameras or from storage devices, such as flash memory cards or universal serial bus (USB) devices.
- Operate special equipment to perform tasks such as transferring film to videotape or producing photographic enlargements.
- Examine developed prints for defects, such as broken lines, spots, or blurs.
- Read work orders to determine required processes, techniques, materials, or equipment.
- Load circuit boards, racks or rolls of film, negatives, or printing paper into processing or printing machines.
- Insert processed negatives and prints into envelopes for delivery to customers.
- Reprint originals for enlargement or in sections to be pieced together.
- Clean or maintain photoprocessing or darkroom equipment, using ultrasonic equipment or cleaning and rinsing solutions.
- Maintain records, such as quantities or types of processing completed, materials used, or customer charges.
- Immerse film, negatives, paper, or prints in developing solutions, fixing solutions, and water to complete photographic development processes.
- Examine quality of film fades or dissolves for potential color corrections, using color analyzers.
- Thread filmstrips through densitometers or sensitometers and expose film to light to determine density of film, necessary color corrections, or light sensitivity.
- Examine drawings, negatives, or photographic prints to determine coloring, shading, accenting, or other changes required for retouching or restoration.
- Place sensitized paper in frames of projection printers, photostats, or other reproduction machines.
- Upload digital images onto Web sites for customers.
- Produce timed prints with separate densities or color settings for each scene of a production.
- Splice broken or separated film and mount film on reels.
- Retouch photographic negatives or original prints to correct defects.
- Adjust digital images using software.
- Monitor equipment operation to detect malfunctions.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Wash work areas, machines, equipment, vehicles, or products.
- Break up defective products for reprocessing.
- Cut or break flashing from materials or products.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
