- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.
Occupations with related tasks Save Table: XLSX CSV
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Mark, engrave, or emboss designs on metal pieces such as castings, wire, or jewelry, following specifications.
- Cut designs in molds or other materials to be used as models in the fabrication of metal and jewelry products.
- Position stones and metal pieces, and set, mount, and secure items in place, using setting and hand tools.
- Smooth soldered joints and rough spots, using hand files and emery paper, and polish smoothed areas with polishing wheels or buffing wire.
- Create jewelry from materials such as gold, silver, platinum, and precious or semiprecious stones.
- Make repairs, such as enlarging or reducing ring sizes, soldering pieces of jewelry together, and replacing broken clasps and mountings.
- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Select and acquire metals and gems for designs.
- Compute costs of labor and materials to determine production costs of products and articles.
- Examine assembled or finished products to ensure conformance to specifications, using magnifying glasses or precision measuring instruments.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Construct preliminary models of wax, metal, clay, or plaster, and form sample castings in molds.
- Pour molten metal alloys or other materials into molds to cast models of jewelry.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Soften metal to be used in designs by heating it with a gas torch and shape it, using hammers and dies.
- Determine appraised values of diamonds and other gemstones based on price guides, market fluctuations, and stone grades and rarity.
- Grade stones based on their color, perfection, and quality of cut.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Write or modify design specifications such as the metal contents and weights of items.
- Create new jewelry designs and modify existing designs, using computers as necessary.
- Buy and sell jewelry, or serve as agents between buyers and sellers.
- Record the weights and processing times of finished pieces.
- Lay out designs on metal stock, and cut along markings to fabricate pieces used to cast metal molds.
- Design and fabricate molds, models, and machine accessories, and modify hand tools used to cast metal and jewelry pieces.
- Research and analyze reference materials, and consult with interested parties to develop new products or modify existing designs.
- Weigh, mix, and melt metal alloys or materials needed for jewelry models.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Rout out locations where parts are to be joined to items, using routing machines.
- Mark, engrave, or emboss designs on metal pieces such as castings, wire, or jewelry, following specifications.
- Cut designs in molds or other materials to be used as models in the fabrication of metal and jewelry products.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Collect samples, or signal workers to sample metal for analysis.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Transport metal ingots to storage areas, using forklifts.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Add metal to molds to compensate for shrinkage.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Engrave or stamp identifying symbols, letters, or numbers on products.
- Read work orders or examine parts to determine parts or sections of products to be produced.
- Trim or remove excess material, using scrapers, knives, or band saws.
- Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage.
- Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges.
- Clean, finish, and lubricate molds and mold parts.
- Separate models or patterns from molds and examine products for accuracy.
- Set the proper operating temperature for each casting.
- Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.
- Align and assemble parts to produce completed products, using gauges and hand tools.
- Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds.
- Select sizes and types of molds according to instructions.
- Patch broken edges or fractures, using clay or plaster.
- Withdraw cores or other loose mold members after castings solidify.
- Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools.
- Measure and cut products to specified dimensions, using measuring and cutting instruments.
- Smooth surfaces of molds, using scraping tools or sandpaper.
- Measure ingredients and mix molding, casting material, or sealing compounds to prescribed consistencies, according to formulas.
- Remove excess materials and level and smooth wet mold mixtures.
- Verify dimensions of products, using measuring instruments, such as calipers, vernier gauges, or protractors.
- Bore holes or cut grates, risers, or pouring spouts in molds, using power tools.
- Tap or tilt molds to ensure uniform distribution of materials.
- Construct or form molds for use in casting clay or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks.
- Pour, pack, spread, or press plaster, concrete, or other materials into or around models or molds.
- Engrave or stamp identifying symbols, letters, or numbers on products.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
- Examine stitched, collated, bound, or unbound product samples for defects, such as imperfect bindings, ink spots, torn pages, loose pages, or loose or uncut threads.
- Read work orders to determine instructions and specifications for machine set-up.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Stitch or glue endpapers, bindings, backings, or signatures, using sewing machines, glue machines, or glue and brushes.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Maintain records, such as daily production records, using specified forms.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Set up or operate bindery machines, such as coil binders, thermal or tape binders, plastic comb binders, or specialty binders.
- Set up or operate machines that perform binding operations, such as pressing, folding, or trimming.
- Prepare finished books for shipping by wrapping or packing books and stacking boxes on pallets.
- Set up or operate glue machines by filling glue reservoirs, turning switches to activate heating elements, or adjusting glue flow or conveyor speed.
- Train workers to set up, operate, and use automatic bindery machines.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Bind new books, using hand tools such as bone folders, knives, hammers, or brass binding tools.
- Imprint or emboss lettering, designs, or numbers on book covers, using gold, silver, or colored foil, and stamping machines.
- Compress sewed or glued signatures, using hand presses or smashing machines.
- Meet with clients, printers, or designers to discuss job requirements or binding plans.
- Form book bodies by folding and sewing printed sheets to form signatures and assembling signatures in numerical order.
- Design original or special bindings for limited editions or other custom binding projects.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Repair, restore, or rebind old, rare, or damaged books, using hand tools.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
