Carpenters
47-2031.00

The occupation code you requested, 47-2031.01 (Construction Carpenters), is no longer in use. In the future, please use 47-2031.00 (Carpenters) instead.

Construct, erect, install, or repair structures and fixtures made of wood and comparable materials, such as concrete forms; building frameworks, including partitions, joists, studding, and rafters; and wood stairways, window and door frames, and hardwood floors. May also install cabinets, siding, drywall, and batt or roll insulation. Includes brattice builders who build doors or brattices (ventilation walls or partitions) in underground passageways.

Sample of reported job titles: Bridge Carpenter, Cabinet Maker, Carpenter, Concrete Carpenter, Construction Carpenter, Form Carpenter, Framer, Maintenance Carpenter, Rough Carpenter, Scaffold Builder

Occupation-Specific Information

Tasks

  • Follow established safety rules and regulations and maintain a safe and clean environment.
  • Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
  • Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
  • Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
  • Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
  • Verify trueness of structure, using plumb bob and level.
  • Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
  • Erect scaffolding or ladders for assembling structures above ground level.
  • Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.
  • Maintain records, document actions, and present written progress reports.
  • Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
  • Maintain job records and schedule work crew.
  • Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers.
  • Bore boltholes in timber, masonry or concrete walls, using power drill.
  • Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.
  • Dig or direct digging of post holes and set poles to support structures.
  • Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.
  • Construct forms or chutes for pouring concrete.
  • Arrange for subcontractors to deal with special areas, such as heating or electrical wiring work.
  • Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.
  • Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.
  • Select and order lumber or other required materials.
  • Work with or remove hazardous material.
  • Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.
  • Prepare cost estimates for clients or employers.
  • Perform minor plumbing, welding, or concrete mixing work.
  • Apply shock-absorbing, sound-deadening, or decorative paneling to ceilings or walls.
  • Examine structural timbers and supports to detect decay, and replace timbers as required, using hand tools, nuts, and bolts.
  • Build sleds from logs and timbers for use in hauling camp buildings and machinery through wooded areas.

back to top

Technology Skills

Hot technology
Hot Technologies are requirements most frequently included across all employer job postings.

back to top

Occupational Requirements

Work Activities

  • Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
  • Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
  • Inspecting Equipment, Structures, or Materials — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
  • Monitoring Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
  • Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
  • Performing General Physical Activities — Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials.
  • Communicating with Supervisors, Peers, or Subordinates — Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
  • Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems.
  • Organizing, Planning, and Prioritizing Work — Developing specific goals and plans to prioritize, organize, and accomplish your work.
  • Coordinating the Work and Activities of Others — Getting members of a group to work together to accomplish tasks.
  • Operating Vehicles, Mechanized Devices, or Equipment — Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or watercraft.
  • Processing Information — Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
  • Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment — Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
  • Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job.
  • Thinking Creatively — Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
  • Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
  • Scheduling Work and Activities — Scheduling events, programs, and activities, as well as the work of others.
  • Analyzing Data or Information — Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
  • Evaluating Information to Determine Compliance with Standards — Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
  • Judging the Qualities of Objects, Services, or People — Assessing the value, importance, or quality of things or people.
  • Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
  • Guiding, Directing, and Motivating Subordinates — Providing guidance and direction to subordinates, including setting performance standards and monitoring performance.
  • Developing and Building Teams — Encouraging and building mutual trust, respect, and cooperation among team members.
  • Estimating the Quantifiable Characteristics of Products, Events, or Information — Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
  • Resolving Conflicts and Negotiating with Others — Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.
  • Documenting/Recording Information — Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
  • Communicating with People Outside the Organization — Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
  • Interpreting the Meaning of Information for Others — Translating or explaining what information means and how it can be used.
  • Training and Teaching Others — Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
  • Coaching and Developing Others — Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
  • Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.

back to top

Detailed Work Activities

back to top

Work Context

  • Face-to-Face Discussions — 94% responded “Every day.”
  • Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets — 95% responded “Every day.”
  • Contact With Others — 84% responded “Constant contact with others.”
  • Spend Time Standing — 70% responded “Continually or almost continually.”
  • Importance of Being Exact or Accurate — 67% responded “Extremely important.”
  • Responsible for Others' Health and Safety — 68% responded “Very high responsibility.”
  • Work With Work Group or Team — 68% responded “Extremely important.”
  • Time Pressure — 55% responded “Every day.”
  • Impact of Decisions on Co-workers or Company Results — 64% responded “Very important results.”
  • Responsibility for Outcomes and Results — 57% responded “Very high responsibility.”
  • Sounds, Noise Levels Are Distracting or Uncomfortable — 59% responded “Every day.”
  • Frequency of Decision Making — 67% responded “Every day.”
  • Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls — 59% responded “Continually or almost continually.”
  • Exposed to Contaminants — 44% responded “Every day.”
  • Outdoors, Exposed to Weather — 54% responded “Every day.”
  • Physical Proximity — 70% responded “Moderately close (at arm's length).”
  • Telephone — 44% responded “Every day.”
  • Consequence of Error — 50% responded “Extremely serious.”
  • Duration of Typical Work Week — 63% responded “40 hours.”
  • Exposed to Hazardous Equipment — 52% responded “Every day.”
  • Coordinate or Lead Others — 33% responded “Important.”
  • Freedom to Make Decisions — 39% responded “Some freedom.”
  • Structured versus Unstructured Work — 35% responded “Some freedom.”
  • Spend Time Bending or Twisting the Body — 31% responded “Continually or almost continually.”
  • Exposed to High Places — 27% responded “Every day.”
  • Spend Time Making Repetitive Motions — 44% responded “Continually or almost continually.”
  • Very Hot or Cold Temperatures — 33% responded “Once a week or more but not every day.”
  • Level of Competition — 26% responded “Extremely competitive.”
  • Spend Time Walking and Running — 40% responded “About half the time.”
  • Frequency of Conflict Situations — 27% responded “Once a week or more but not every day.”
  • Spend Time Kneeling, Crouching, Stooping, or Crawling — 31% responded “About half the time.”
  • Deal With Unpleasant or Angry People — 48% responded “Once a month or more but not every week.”
  • Indoors, Environmentally Controlled — 41% responded “Never.”
  • Outdoors, Under Cover — 29% responded “Once a year or more but not every month.”

back to top

Experience Requirements

Job Zone

Title
Job Zone Two: Some Preparation Needed
Education
These occupations usually require a high school diploma.
Related Experience
Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
Job Training
Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples
These occupations often involve using your knowledge and skills to help others. Examples include orderlies, counter and rental clerks, customer service representatives, security guards, upholsterers, tellers, and dental laboratory technicians.
SVP Range
(4.0 to < 6.0)

back to top

Training & Credentials

State training
Local training
Certifications
State licenses

back to top

Apprenticeship Opportunities

Example apprenticeship titles for this occupation:

  • Boatbuilder, Wood
  • Carpenter
  • Carpenter, Interior Systems (Alternate Title: Interior Systems Carpenter)
  • Carpenter, Maintenance
  • Carpenter, Mold
  • Carpenter, Ship
  • Casket Assembler
  • Form Builder Carpenter (Existing Title: Form Builder)
  • Joiner (Ship & Boat Bldg)
  • Lathing Specialist (Existing Title: Lather)
  • Pile Driver
  • Prop Maker (Amuse & Rec)
  • Residential Carpenter Specialist (Siding) (Existing Title: Residential Carpenter)
  • Roofer
  • Scaffold Erector (Existing Title: Carpenter, Rough)
  • Shipwright (Ship & Boat)

Specific title(s) listed above are vetted by industry and approved by the U.S. Department of Labor for use in a Registered Apprenticeship Program.

Start your career and build your skillset. Visit Apprenticeship.gov external site to learn about opportunities related to this occupation.

back to top

Worker Requirements

Skills

  • Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
  • Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.
  • Monitoring — Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
  • Coordination — Adjusting actions in relation to others' actions.
  • Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
  • Reading Comprehension — Understanding written sentences and paragraphs in work-related documents.
  • Speaking — Talking to others to convey information effectively.
  • Active Learning — Understanding the implications of new information for both current and future problem-solving and decision-making.
  • Complex Problem Solving — Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
  • Judgment and Decision Making — Considering the relative costs and benefits of potential actions to choose the most appropriate one.
  • Mathematics — Using mathematics to solve problems.
  • Time Management — Managing one's own time and the time of others.

back to top

Knowledge

  • Building and Construction — Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
  • Administration and Management — Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
  • Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
  • Design — Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
  • Engineering and Technology — Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
  • Public Safety and Security — Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
  • Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Education and Training — Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
  • Customer and Personal Service — Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
  • Physics — Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

back to top

Education

How much education does a new hire need to perform a job in this occupation? Respondents said:

  • 52%
     
    responded: High school diploma or equivalent requiredmore info
  • 21%
     
    responded: Post-secondary certificate required
  • 18%
     
    responded: Less than high school diploma required

back to top

Worker Characteristics

Abilities

  • Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
  • Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
  • Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
  • Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • Near Vision — The ability to see details at close range (within a few feet of the observer).
  • Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
  • Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense.
  • Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
  • Trunk Strength — The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
  • Far Vision — The ability to see details at a distance.
  • Multilimb Coordination — The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
  • Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
  • Oral Expression — The ability to communicate information and ideas in speaking so others will understand.
  • Static Strength — The ability to exert maximum muscle force to lift, push, pull, or carry objects.
  • Inductive Reasoning — The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
  • Category Flexibility — The ability to generate or use different sets of rules for combining or grouping things in different ways.
  • Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
  • Reaction Time — The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
  • Selective Attention — The ability to concentrate on a task over a period of time without being distracted.
  • Explosive Strength — The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object.
  • Flexibility of Closure — The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
  • Perceptual Speed — The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
  • Speech Clarity — The ability to speak clearly so others can understand you.
  • Speech Recognition — The ability to identify and understand the speech of another person.
  • Written Comprehension — The ability to read and understand information and ideas presented in writing.

back to top

Interests

Interest code: RC
Want to discover your interests? Take the O*NET Interest Profiler at My Next Move.
  • Realistic — Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.
  • Conventional — Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or human resources.

back to top

Work Values

  • Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
  • Independence — Occupations that satisfy this work value allow employees to work on their own and make decisions. Corresponding needs are Creativity, Responsibility and Autonomy.
  • Working Conditions — Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.

back to top

Work Styles

  • Attention to Detail — Job requires being careful about detail and thorough in completing work tasks.
  • Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations.
  • Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
  • Initiative — Job requires a willingness to take on responsibilities and challenges.
  • Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
  • Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace.
  • Integrity — Job requires being honest and ethical.
  • Persistence — Job requires persistence in the face of obstacles.
  • Stress Tolerance — Job requires accepting criticism and dealing calmly and effectively with high-stress situations.
  • Self-Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
  • Leadership — Job requires a willingness to lead, take charge, and offer opinions and direction.
  • Analytical Thinking — Job requires analyzing information and using logic to address work-related issues and problems.
  • Independence — Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.
  • Concern for Others — Job requires being sensitive to others' needs and feelings and being understanding and helpful on the job.
  • Social Orientation — Job requires preferring to work with others rather than alone, and being personally connected with others on the job.
  • Innovation — Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.

back to top

Workforce Characteristics

Wages & Employment Trends

Median wages (2022)
$24.71 hourly, $51,390 annual
State wages
Local wages
Employment (2022)
956,300 employees
Projected growth (2022-2032)
Little or no change
Projected job openings (2022-2032)
79,500
State trends
Top industries (2022)

Source: Bureau of Labor Statistics 2022 wage data external site and 2022-2032 employment projections external site. “Projected growth” represents the estimated change in total employment over the projections period (2022-2032). “Projected job openings” represent openings due to growth and replacement.

back to top

Job Openings on the Web

State job openings
Local job openings

back to top

More Information

back to top

Sources of Additional Information

Disclaimer: Sources are listed to provide additional information on related jobs, specialties, and/or industries. Links to non-DOL Internet sites are provided for your convenience and do not constitute an endorsement.

back to top