- Construct and evaluate electrical components for consumer electronics applications such as fuel cells for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
Occupations with related tasks Save Table: XLSX CSV
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
- Attach wires between controllers.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Build or assemble robotic devices or systems.
- Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics.
- Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors.
- Maintain service records of robotic equipment or automated production systems.
- Modify computer-controlled robot movements.
- Perform preventive or corrective maintenance on robotic systems or components.
- Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Train customers or other personnel to install, use, or maintain robots.
- Document robotics test procedures and results.
- Assist engineers in the design, configuration, or application of robotic systems.
- Install new robotic systems in stationary positions or on tracks.
- Program complex robotic systems, such as vision systems.
- Develop robotic path motions to maximize efficiency, safety, and quality.
- Fabricate housings, jigs, fittings, or fixtures, using metalworking machines.
- Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples.
- Inspect installation sites.
- Maintain inventories of robotic production supplies, such as sensors or cables.
- Develop three-dimensional simulations of automation systems.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
- Attach wires between controllers.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Build or assemble robotic devices or systems.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Develop, test, or program new robots.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Program and calibrate drones for specific missions or tasks, ensuring proper functionality and performance.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Perform monitoring activities to ensure that ships comply with international regulations and standards for life-saving equipment and pollution preventatives.
- Design complete hull and superstructure according to specifications and test data, in conformity with standards of safety, efficiency, and economy.
- Study design proposals and specifications to establish basic characteristics of craft, such as size, weight, speed, propulsion, displacement, and draft.
- Maintain contact with, and formulate reports for, contractors and clients to ensure completion of work at minimum cost.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
- Check, test, and maintain automatic controls and alarm systems.
- Prepare technical reports for use by engineering, management, or sales personnel.
- Design layout of craft interior, including cargo space, passenger compartments, ladder wells, and elevators.
- Prepare, or direct the preparation of, product or system layouts and detailed drawings and schematics.
- Inspect marine equipment and machinery to draw up work requests and job specifications.
- Conduct analytical, environmental, operational, or performance studies to develop designs for products, such as marine engines, equipment, and structures.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Investigate and observe tests on machinery and equipment for compliance with standards.
- Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
- Design and oversee testing, installation, and repair of marine apparatus and equipment.
- Conduct environmental, operational, or performance tests on marine machinery and equipment.
- Analyze data to determine feasibility of product proposals.
- Determine conditions under which tests are to be conducted, as well as sequences and phases of test operations.
- Confer with research personnel to clarify or resolve problems and to develop or modify designs.
- Review work requests and compare them with previous work completed on ships to ensure that costs are economically sound.
- Supervise other engineers and crew members and train them for routine and emergency duties.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
- Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
- Maintain and coordinate repair of marine machinery and equipment for installation on vessels.
- Oversee construction and testing of prototype in model basin and develop sectional and waterline curves of hull to establish center of gravity, ideal hull form, and buoyancy and stability data.
- Procure materials needed to repair marine equipment and machinery.
- Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.
- Develop plans for safely drydocking vessels, including structural integrity, block loading, and stability.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Evaluate traffic control devices or lighting systems to determine need for modification or expansion.
- Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion.
- Design or prepare plans for new transportation systems or parts of systems, such as airports, commuter trains, highways, streets, bridges, drainage structures, or roadway lighting.
- Check construction plans, design calculations, or cost estimations to ensure completeness, accuracy, or conformity to engineering standards or practices.
- Prepare administrative, technical, or statistical reports on traffic-operation matters, such as accidents, safety measures, or pedestrian volume or practices.
- Plan alteration or modification of existing transportation structures to improve safety or function.
- Confer with contractors, utility companies, or government agencies to discuss plans, specifications, or work schedules.
- Present data, maps, or other information at construction-related public hearings or meetings.
- Prepare final project layout drawings that include details such as stress calculations.
- Investigate traffic problems and recommend methods to improve traffic flow or safety.
- Estimate transportation project costs.
- Design or engineer drainage, erosion, or sedimentation control systems for transportation projects.
- Prepare project budgets, schedules, or specifications for labor or materials.
- Inspect completed transportation projects to ensure safety or compliance with applicable standards or regulations.
- Review development plans to determine potential traffic impact.
- Analyze environmental impact statements for transportation projects.
- Supervise the maintenance or repair of transportation systems or system components.
- Model transportation scenarios to evaluate the impacts of activities such as new development or to identify possible solutions to transportation problems.
- Inspect completed transportation projects to ensure compliance with environmental regulations.
- Participate in contract bidding, negotiation, or administration.
- Evaluate construction project materials for compliance with environmental standards.
- Direct the surveying, staking, or laying-out of construction projects.
- Design transportation systems or structures with sustainable materials or products, such as porous pavement or bioretention structures.
- Investigate or test specific construction project materials to determine compliance to specifications or standards.
- Develop or assist in the development of transportation-related computer software or computer processes.
- Develop plans to deconstruct damaged or obsolete roadways or other transportation structures in a manner that is environmentally sound or prepares the land for sustainable development.
- Develop plans for integration of drone technology into transportation systems for purposes such as delivery of goods or traffic monitoring.
- Evaluate traffic control devices or lighting systems to determine need for modification or expansion.
- Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion.
- Design, build, or modify fixtures used to assemble parts.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Compute or record photonic test data.
- Maintain clean working environments, according to clean room standards.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Assist scientists or engineers in the conduct of photonic experiments.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Monitor inventory levels and order supplies as necessary.
- Optimize photonic process parameters by making prototype or production devices.
- Splice fibers, using fusion splicing or other techniques.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Repair or calibrate products, such as surgical lasers.
- Lay out cutting lines for machining, using drafting tools.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Design, build, or modify fixtures used to assemble parts.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Assemble or disassemble complex mechanical systems.
- Devise, fabricate, or assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments.
- Interpret engineering sketches, specifications, or drawings.
- Calculate required capacities for equipment of proposed system to obtain specified performance and submit data to engineering personnel for approval.
- Review project instructions and blueprints to ascertain test specifications, procedures, and objectives, and test nature of technical problems such as redesign.
- Provide technical support to other employees regarding mechanical design, fabrication, testing, or documentation.
- Test machines, components, materials, or products to determine characteristics such as performance, strength, or response to stress.
- Draft detail drawing or sketch for drafting room completion or to request parts fabrication by machine, sheet or wood shops.
- Analyze test results in relation to design or rated specifications and test objectives, and modify or adjust equipment to meet specifications.
- Record test procedures and results, numerical and graphical data, and recommendations for changes in product or test methods.
- Prepare specifications, designs, or sketches for machines, components, or systems related to the generation, transmission, or use of mechanical or fluid energy.
- Read dials and meters to determine amperage, voltage, electrical output and input at specific operating temperature to analyze parts performance.
- Design molds, tools, dies, jigs, or fixtures for use in manufacturing processes.
- Review project instructions and specifications to identify, modify and plan requirements fabrication, assembly and testing.
- Design specialized or customized equipment, machines, or structures.
- Conduct failure analyses, document results, and recommend corrective actions.
- Set up and conduct tests of complete units and components under operational conditions to investigate proposals for improving equipment performance.
- Assist engineers to design, develop, test, or manufacture industrial machinery, consumer products, or other equipment.
- Prepare layouts of machinery, tools, plants, or equipment.
- Prepare equipment inspection schedules, reliability schedules, work plans, or other records.
- Set up prototype and test apparatus and operate test controlling equipment to observe and record prototype test results.
- Evaluate tool drawing designs by measuring drawing dimensions and comparing with original specifications for form and function using engineering skills.
- Analyze energy requirements and distribution systems to maximize the use of intermittent or inflexible renewable energy sources, such as wind or nuclear.
- Prepare parts sketches and write work orders and purchase requests to be furnished by outside contractors.
- Estimate cost factors including labor and material for purchased and fabricated parts and costs for assembly, testing, or installing.
- Assist mechanical engineers in product testing through activities such as setting up instrumentation for automobile crash tests.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Analyze or estimate production costs, such as labor, equipment, and plant space.
- Discuss changes in design, method of manufacture and assembly, or drafting techniques and procedures with staff and coordinate corrections.
- Monitor, inspect, or test mechanical equipment.
- Assemble or disassemble complex mechanical systems.
- Devise, fabricate, or assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Adjust, repair, or replace faulty components of test setups and equipment.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Finish vehicle instrumentation and deinstrumentation.
- Design electrical and mechanical systems for avionic instrumentation applications.
- Operate, test, and troubleshoot uncrewed aerial systems, commonly known as drones, to ensure optimal performance.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Assemble, typeset, scan, and produce digital camera-ready art or film negatives and printer's proofs.
- Design complex graphics and animation, using independent judgment, creativity, and computer equipment.
- Create basic designs, drawings, and illustrations for product labels, cartons, direct mail, or television.
- Participate in design and production of multimedia campaigns, handling budgeting and scheduling, and assisting with such responsibilities as production coordination, background design, and progress tracking.
- Create two-dimensional and three-dimensional images depicting objects in motion or illustrating a process, using computer animation or modeling programs.
- Make objects or characters appear lifelike by manipulating light, color, texture, shadow, and transparency, or manipulating static images to give the illusion of motion.
- Apply story development, directing, cinematography, and editing to animation to create storyboards that show the flow of the animation and map out key scenes and characters.
- Implement and maintain configuration control systems.
- Script, plan, and create animated narrative sequences under tight deadlines, using computer software and hand drawing techniques.
- Develop briefings, brochures, multimedia presentations, web pages, promotional products, technical illustrations, and computer artwork for use in products, technical manuals, literature, newsletters, and slide shows.
- Convert real objects to animated objects through modeling, using techniques such as optical scanning.
- Create pen-and-paper images to be scanned, edited, colored, textured, or animated by computer.
- Use models to simulate the behavior of animated objects in the finished sequence.
- Assemble, typeset, scan, and produce digital camera-ready art or film negatives and printer's proofs.
- Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
- Develop safety procedures to be employed by workers operating equipment or working in close proximity to ongoing chemical reactions.
- Troubleshoot problems with chemical manufacturing processes.
- Monitor and analyze data from processes and experiments.
- Design and plan layout of equipment.
- Prepare estimate of production costs and production progress reports for management.
- Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
- Conduct research to develop new and improved chemical manufacturing processes.
- Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
- Develop processes to separate components of liquids or gases or generate electrical currents, using controlled chemical processes.
- Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
- Perform laboratory studies of steps in manufacture of new products and test proposed processes in small-scale operation, such as a pilot plant.
- Develop computer models of chemical processes.
- Direct activities of workers who operate or are engaged in constructing and improving absorption, evaporation, or electromagnetic equipment.
- Adapt processes to convert from small-scale laboratory operations to large-scale commercial production.
- Develop process flow diagrams or pipe and instrumentation diagrams.
- Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
- Assemble and modify existing pieces of equipment to meet special needs.
- Update knowledge and skills to keep up with rapid advancements in computer technology.
- Design and develop computer hardware and support peripherals, including central processing units (CPUs), support logic, microprocessors, custom integrated circuits, and printers and disk drives.
- Confer with engineering staff and consult specifications to evaluate interface between hardware and software and operational and performance requirements of overall system.
- Build, test, and modify product prototypes, using working models or theoretical models constructed with computer simulation.
- Write detailed functional specifications that document the hardware development process and support hardware introduction.
- Test and verify hardware and support peripherals to ensure that they meet specifications and requirements, by recording and analyzing test data.
- Direct technicians, engineering designers or other technical support personnel as needed.
- Provide technical support to designers, marketing and sales departments, suppliers, engineers and other team members throughout the product development and implementation process.
- Select hardware and material, assuring compliance with specifications and product requirements.
- Store, retrieve, and manipulate data for analysis of system capabilities and requirements.
- Analyze user needs and recommend appropriate hardware.
- Evaluate factors such as reporting formats required, cost constraints, and need for security restrictions to determine hardware configuration.
- Provide training and support to system designers and users.
- Monitor functioning of equipment and make necessary modifications to ensure system operates in conformance with specifications.
- Specify power supply requirements and configuration, drawing on system performance expectations and design specifications.
- Analyze information to determine, recommend, and plan layout, including type of computers and peripheral equipment modifications.
- Recommend purchase of equipment to control dust, temperature, and humidity in area of system installation.
- Assemble and modify existing pieces of equipment to meet special needs.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Determine project material or equipment needs.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Assess the physical security of servers, systems, or network devices to identify vulnerability to temperature, vandalism, or natural disasters.
- Collect stakeholder data to evaluate risk and to develop mitigation strategies.
- Conduct network and security system audits, using established criteria.
- Configure information systems to incorporate principles of least functionality and least access.
- Design security solutions to address known device vulnerabilities.
- Develop and execute tests that simulate the techniques of known cyber threat actors.
- Develop infiltration tests that exploit device vulnerabilities.
- Develop presentations on threat intelligence.
- Develop security penetration testing processes, such as wireless, data networks, and telecommunication security tests.
- Discuss security solutions with information technology teams or management.
- Document penetration test findings.
- Evaluate vulnerability assessments of local computing environments, networks, infrastructures, or enclave boundaries.
- Gather cyber intelligence to identify vulnerabilities.
- Identify new threat tactics, techniques, or procedures used by cyber threat actors.
- Identify security system weaknesses, using penetration tests.
- Investigate security incidents, using computer forensics, network forensics, root cause analysis, or malware analysis.
- Keep up with new penetration testing tools and methods.
- Maintain up-to-date knowledge of hacking trends.
- Prepare and submit reports describing the results of security fixes.
- Test the security of systems by attempting to gain access to networks, Web-based applications, or computers.
- Update corporate policies to improve cyber security.
- Write audit reports to communicate technical and procedural findings and recommend solutions.
- Assess the physical security of servers, systems, or network devices to identify vulnerability to temperature, vandalism, or natural disasters.
- Evaluate remote sensing project requirements to determine the types of equipment or computer software necessary to meet project requirements, such as specific image types or output resolutions.
- Collect geospatial data, using technologies such as aerial photography, light and radio wave detection systems, digital satellites, or thermal energy systems.
- Verify integrity and accuracy of data contained in remote sensing image analysis systems.
- Integrate remotely sensed data with other geospatial data.
- Consult with remote sensing scientists, surveyors, cartographers, or engineers to determine project needs.
- Adjust remotely sensed images for optimum presentation by using software to select image displays, define image set categories, or choose processing routines.
- Manipulate raw data to enhance interpretation, either on the ground or during remote sensing flights.
- Merge scanned images or build photo mosaics of large areas, using image processing software.
- Participate in the planning or development of mapping projects.
- Prepare documentation or presentations, including charts, photos, or graphs.
- Correct raw data for errors due to factors such as skew or atmospheric variation.
- Calibrate data collection equipment.
- Develop or maintain geospatial information databases.
- Monitor raw data quality during collection, and make equipment corrections as necessary.
- Maintain records of survey data.
- Collect verification data on the ground, using equipment such as global positioning receivers, digital cameras, or notebook computers.
- Document methods used and write technical reports containing information collected.
- Develop specialized computer software routines to customize and integrate image analysis.
- Collaborate with agricultural workers to apply remote sensing information to efforts to reduce negative environmental impacts of farming practices.
- Collect remote sensing data for forest or carbon tracking activities involved in assessing the impact of environmental change.
- Provide remote sensing data for use in addressing environmental issues, such as surface water modeling or dust cloud detection.
- Operate remote sensing equipment on drones to collect data in areas that are difficult to access or require high-resolution imagery.
- Evaluate remote sensing project requirements to determine the types of equipment or computer software necessary to meet project requirements, such as specific image types or output resolutions.
- Evaluate robotic systems or prototypes.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Install, calibrate, operate, or maintain robots.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Evaluate robotic systems or prototypes.
- Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics.
- Conduct or direct system-level automotive testing.
- Provide technical direction to other engineers or engineering support personnel.
- Perform failure, variation, or root cause analyses.
- Calibrate vehicle systems, including control algorithms or other software systems.
- Prepare or present technical or project status reports.
- Conduct research studies to develop new concepts in the field of automotive engineering.
- Establish production or quality control standards.
- Alter or modify designs to obtain specified functional or operational performance.
- Research or implement green automotive technologies involving alternative fuels, electric or hybrid cars, or lighter or more fuel-efficient vehicles.
- Develop calibration methodologies, test methodologies, or tools.
- Create design alternatives for vehicle components, such as camless or dual-clutch engines or alternative air-conditioning systems, to increase fuel efficiency.
- Develop or implement operating methods or procedures.
- Develop engineering specifications or cost estimates for automotive design concepts.
- Conduct automotive design reviews.
- Design vehicles that use lighter materials, such as aluminum, magnesium alloy, or plastic, to improve fuel efficiency.
- Write, review, or maintain engineering documentation.
- Develop specifications for vehicles powered by alternative fuels or alternative power methods.
- Build models for algorithm or control feature verification testing.
- Coordinate production activities with other functional units, such as procurement, maintenance, or quality control.
- Design control systems or algorithms for purposes such as automotive energy management, emissions management, or increased operational safety or performance.
- Develop or integrate control feature requirements.
- Research computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products.
- Design vehicles for increased recyclability or use of natural, renewable, or recycled materials in vehicle construction.
- Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics.
- Assemble components, using techniques such as interference fitting, solvent bonding, adhesive bonding, heat sealing, or ultrasonic welding.
- Produce images or measurements, using tools or techniques such as atomic force microscopy, scanning electron microscopy, optical microscopy, particle size analysis, or zeta potential analysis.
- Maintain accurate record or batch-record documentation of nanoproduction.
- Calibrate nanotechnology equipment, such as weighing, testing, or production equipment.
- Maintain work area according to cleanroom or other processing standards.
- Repair nanotechnology processing or testing equipment or submit work orders for equipment repair.
- Assist nanoscientists or engineers in processing or characterizing materials according to physical or chemical properties.
- Collaborate with scientists or engineers to design or conduct experiments for the development of nanotechnology materials, components, devices, or systems.
- Operate nanotechnology compounding, testing, processing, or production equipment in accordance with appropriate standard operating procedures, good manufacturing practices, hazardous material restrictions, or health and safety requirements.
- Monitor hazardous waste cleanup procedures to ensure proper application of nanocomposites or accomplishment of objectives.
- Monitor equipment during operation to ensure adherence to specifications for characteristics such as pressure, temperature, or flow.
- Measure or mix chemicals or compounds in accordance with detailed instructions or formulas.
- Inspect or measure thin films of carbon nanotubes, polymers, or inorganic coatings, using a variety of techniques or analytical tools.
- Prepare capability data, training materials, or other documentation for transfer of processes to production.
- Collect or compile nanotechnology research or engineering data.
- Prepare detailed verbal or written presentations for scientists, engineers, project managers, or upper management.
- Contribute written material or data for grant or patent applications.
- Implement new or enhanced methods or processes for the processing, testing, or manufacture of nanotechnology materials or products.
- Develop or modify wet chemical or industrial laboratory experimental techniques for nanoscale use.
- Assist nanoscientists or engineers in writing process specifications or documentation.
- Measure emission of nanodust or nanoparticles during nanocomposite or other nano-scale production processes, using systems such as aerosol detection systems.
- Perform functional tests of nano-enhanced assemblies, components, or systems, using equipment such as torque gauges or conductivity meters.
- Compare the performance or environmental impact of nanomaterials by nanoparticle size, shape, or organization.
- Process nanoparticles or nanostructures, using technologies such as ultraviolet radiation, microwave energy, or catalysis.
- Analyze the life cycle of nanomaterials or nano-enabled products to determine environmental impact.
- Assemble components, using techniques such as interference fitting, solvent bonding, adhesive bonding, heat sealing, or ultrasonic welding.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Recommend design modifications to eliminate machine or system malfunctions.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Provide technical customer service.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Provide feedback to design engineers on customer problems or needs.
- Write performance requirements for product development or engineering projects.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design test control apparatus or equipment or develop procedures for testing products.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Solicit new business.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Evaluate the operation and maintenance of water or wastewater systems to identify ways to improve their efficiency.
- Provide technical direction or supervision to junior engineers, engineering or computer-aided design (CAD) technicians, or other technical personnel.
- Review and critique proposals, plans, or designs related to water or wastewater treatment systems.
- Design domestic or industrial water or wastewater treatment plants, including advanced facilities with sequencing batch reactors (SBR), membranes, lift stations, headworks, surge overflow basins, ultraviolet disinfection systems, aerobic digesters, sludge lagoons, or control buildings.
- Design or select equipment for use in wastewater processing to ensure compliance with government standards.
- Design pumping systems, pumping stations, pipelines, force mains, or sewers for the collection of wastewater.
- Design water distribution systems for potable or non-potable water.
- Conduct water quality studies to identify and characterize water pollutant sources.
- Analyze and recommend chemical, biological, or other wastewater treatment methods to prepare water for industrial or domestic use.
- Identify design alternatives for the development of new water resources.
- Design water runoff collection networks, water supply channels, or water supply system networks.
- Design water or wastewater lift stations, including water wells.
- Conduct cost-benefit analyses for the construction of water supply systems, runoff collection networks, water and wastewater treatment plants, or wastewater collection systems.
- Provide technical support on water resource or treatment issues to government agencies.
- Conduct feasibility studies for the construction of facilities, such as water supply systems, runoff collection networks, water and wastewater treatment plants, or wastewater collection systems.
- Analyze storm water or floodplain drainage systems to control erosion, stabilize river banks, repair channel streams, or design bridges.
- Oversee the construction of decentralized or on-site wastewater treatment systems, including reclaimed water facilities.
- Develop plans for new water resources or water efficiency programs.
- Perform hydrological analyses, using three-dimensional simulation software, to model the movement of water or forecast the dispersion of chemical pollutants in the water supply.
- Perform hydraulic analyses of water supply systems or water distribution networks to model flow characteristics, test for pressure losses, or to identify opportunities to mitigate risks and improve operational efficiency.
- Write technical reports or publications related to water resources development or water use efficiency.
- Design water storage tanks or other water storage facilities.
- Analyze and recommend sludge treatment or disposal methods.
- Design sludge treatment plants.
- Gather and analyze water use data to forecast water demand.
- Conduct environmental impact studies related to water and wastewater collection, treatment, or distribution.
- Analyze the efficiency of water delivery structures, such as dams, tainter gates, canals, pipes, penstocks, or cofferdams.
- Perform mathematical modeling of underground or surface water resources, such as floodplains, ocean coastlines, streams, rivers, or wetlands.
- Evaluate the operation and maintenance of water or wastewater systems to identify ways to improve their efficiency.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Prepare technical reports, data summary documents, or research articles for scientific publication, regulatory submissions, or patent applications.
- Design or develop medical diagnostic or clinical instrumentation, equipment, or procedures, using the principles of engineering and biobehavioral sciences.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Adapt or design computer hardware or software for medical science uses.
- Maintain databases of experiment characteristics or results.
- Develop statistical models or simulations, using statistical or modeling software.
- Read current scientific or trade literature to stay abreast of scientific, industrial, or technological advances.
- Manage teams of engineers by creating schedules, tracking inventory, creating or using budgets, or overseeing contract obligations or deadlines.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Design or conduct follow-up experimentation, based on generated data, to meet established process objectives.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Communicate with bioregulatory authorities regarding licensing or compliance responsibilities.
- Develop methodologies for transferring procedures or biological processes from laboratories to commercial-scale manufacturing production.
- Collaborate with manufacturing or quality assurance staff to prepare product specification or safety sheets, standard operating procedures, user manuals, or qualification and validation reports.
- Research new materials to be used for products, such as implanted artificial organs.
- Prepare project plans for equipment or facility improvements, including time lines, budgetary estimates, or capital spending requests.
- Consult with chemists or biologists to develop or evaluate novel technologies.
- Confer with research and biomanufacturing personnel to ensure the compatibility of design and production.
- Recommend process formulas, instrumentation, or equipment specifications, based on results of bench or pilot experimentation.
- Communicate with suppliers regarding the design or specifications of bioproduction equipment, instrumentation, or materials.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Design and deliver technology, such as prosthetic devices, to assist people with disabilities.
- Advise manufacturing staff regarding problems with fermentation, filtration, or other bioproduction processes.
- Review existing manufacturing processes to identify opportunities for yield improvement or reduced process variation.
- Develop bioremediation processes to reduce pollution, protect the environment, or treat waste products.
- Lead studies to examine or recommend changes in process sequences or operation protocols.
- Design or direct bench or pilot production experiments to determine the scale of production methods that optimize product yield and minimize production costs.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Verify that well field monitoring data conforms to applicable regulations.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
