- Provide feedback to health service providers regarding improving service accessibility or acceptability.
Occupations with related tasks Save Table: XLSX CSV
- Recommend replacement, repair, or modification of aircraft equipment.
- Recommend changes in rules, policies, standards, and regulations, based on knowledge of operating conditions, aircraft improvements, and other factors.
- Inspect work of aircraft mechanics performing maintenance, modification, or repair and overhaul of aircraft and aircraft mechanical systems to ensure adherence to standards and procedures.
- Examine maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals.
- Inspect new, repaired, or modified aircraft to identify damage or defects and to assess airworthiness and conformance to standards, using checklists, hand tools, and test instruments.
- Approve or deny issuance of certificates of airworthiness.
- Prepare and maintain detailed repair, inspection, investigation, and certification records and reports.
- Examine landing gear, tires, and exteriors of fuselage, wings, and engines for evidence of damage or corrosion and the need for repairs.
- Start aircraft and observe gauges, meters, and other instruments to detect evidence of malfunctions.
- Examine aircraft access plates and doors for security.
- Investigate air accidents and complaints to determine causes.
- Analyze training programs and conduct oral and written examinations to ensure the competency of persons operating, installing, and repairing aircraft equipment.
- Conduct flight test programs to test equipment, instruments, and systems under a variety of conditions, using both manual and automatic controls.
- Inspect uncrewed aircraft systems, such as drones, to ensure compliance with safety and operation regulations.
- Recommend replacement, repair, or modification of aircraft equipment.
- Recommend changes in rules, policies, standards, and regulations, based on knowledge of operating conditions, aircraft improvements, and other factors.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Advise clients about the materials being used for finished products.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Monitor the feed and speed of machines during the machining process.
- Maintain machine tools in proper operational condition.
- Fit and assemble parts to make or repair machine tools.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Operate equipment to verify operational efficiency.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Prepare working sketches for the illustration of product appearance.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Advise clients about the materials being used for finished products.
- Recommend necessary corrective actions, based on inspection results.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Discard or reject products, materials, or equipment not meeting specifications.
- Mark items with details, such as grade or acceptance-rejection status.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
- Notify supervisors or other personnel of production problems.
- Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
- Write test or inspection reports describing results, recommendations, or needed repairs.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
- Position products, components, or parts for testing.
- Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
- Collect or select samples for testing or for use as models.
- Stack or arrange tested products for further processing, shipping, or packaging.
- Check arriving materials to ensure that they match purchase orders, submitting discrepancy reports as necessary.
- Inspect or test raw materials, parts, or products to determine compliance with environmental standards.
- Analyze test data, making computations as necessary, to determine test results.
- Compare colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards.
- Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Fabricate, install, position, or connect components, parts, finished products, or instruments for testing or operational purposes.
- Administer tests to assess whether engineers or operators are qualified to use equipment.
- Monitor machines that automatically measure, sort, or inspect products.
- Adjust, clean, or repair products or processing equipment to correct defects found during inspections.
- Compute usable amounts of items in shipments.
- Grade, classify, or sort products according to sizes, weights, colors, or other specifications.
- Disassemble defective parts or components, such as inaccurate or worn gauges or measuring instruments.
- Compute defect percentages or averages, using formulas and calculators.
- Weigh materials, products, containers, or samples to verify packaging weights or ingredient quantities.
- Recommend necessary corrective actions, based on inspection results.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Recommend or arrange for additional services, such as painting, repair work, renovations, and the replacement of furnishings and equipment.
- Recommend changes that could improve service and increase operational efficiency.
- Supervise in-house services, such as laundries, maintenance and repair, dry cleaning, or valet services.
- Select the most suitable cleaning materials for different types of linens, furniture, flooring, and surfaces.
- Advise managers, desk clerks, or admitting personnel of rooms ready for occupancy.
- Inspect work performed to ensure that it meets specifications and established standards.
- Perform or assist with cleaning duties as necessary.
- Plan and prepare employee work schedules.
- Establish and implement operational standards and procedures for the departments supervised.
- Inspect and evaluate the physical condition of facilities to determine the type of work required.
- Inventory stock to ensure that supplies and equipment are available in adequate amounts.
- Issue supplies and equipment to workers.
- Forecast necessary levels of staffing and stock at different times to facilitate effective scheduling and ordering.
- Check and maintain equipment to ensure that it is in working order.
- Maintain required records of work hours, budgets, payrolls, and other information.
- Direct activities for stopping the spread of infections in facilities, such as hospitals.
- Coordinate activities with other departments to ensure that services are provided in an efficient and timely manner.
- Investigate complaints about service and equipment, and take corrective action.
- Instruct staff in work policies and procedures, and the use and maintenance of equipment.
- Select and order or purchase new equipment, supplies, or furnishings.
- Prepare reports on activity, personnel, and information, such as occupancy, hours worked, facility usage, work performed, and departmental expenses.
- Confer with staff to resolve performance and personnel problems, and to discuss company policies.
- Evaluate employee performance and recommend personnel actions, such as promotions, transfers, and dismissals.
- Perform financial tasks, such as estimating costs and preparing and managing budgets.
- Screen job applicants, and hire new employees.
- Perform grounds maintenance tasks, such as removing snow and mowing the lawn.
- Recommend or arrange for additional services, such as painting, repair work, renovations, and the replacement of furnishings and equipment.
- Recommend changes that could improve service and increase operational efficiency.
- Advise producers about improved products and techniques that could enhance their animal production efforts.
- Study nutritional requirements of animals and nutritive values of animal feed materials.
- Write up or orally communicate research findings to the scientific community, producers, and the public.
- Develop improved practices in feeding, housing, sanitation, or parasite and disease control of animals.
- Conduct research concerning animal nutrition, breeding, or management to improve products or processes.
- Study effects of management practices, processing methods, feed, or environmental conditions on quality and quantity of animal products, such as eggs and milk.
- Research and control animal selection and breeding practices to increase production efficiency and improve animal quality.
- Determine genetic composition of animal populations and heritability of traits, using principles of genetics.
- Crossbreed animals with existing strains or cross strains to obtain new combinations of desirable characteristics.
- Advise producers about improved products and techniques that could enhance their animal production efforts.
- Advise customers and others on the best use of gems to create attractive jewelry items.
- Examine gems during processing to ensure accuracy of angles and positions of cuts or bores, using magnifying glasses, loupes, or shadowgraphs.
- Assign polish, symmetry, and clarity grades to stones, according to established grading systems.
- Estimate wholesale and retail value of gems, following pricing guides, market fluctuations, and other relevant economic factors.
- Examine gem surfaces and internal structures, using polariscopes, refractometers, microscopes, and other optical instruments, to differentiate between stones, to identify rare specimens, or to detect flaws, defects, or peculiarities affecting gem values.
- Identify and document stones' clarity characteristics, using plot diagrams.
- Examine diamonds or gems to ascertain the shape, cut, and width of cut stones, or to select the cuts that will result in the biggest, best quality stones.
- Immerse stones in prescribed chemical solutions to determine specific gravities and key properties of gemstones or substitutes.
- Hold stones, gems, dies, or styluses against rotating plates, wheels, saws, or slitters to cut, shape, slit, grind, or polish them.
- Sort rough diamonds into categories based on shape, size, color, and quality.
- Secure gems or diamonds in holders, chucks, dops, lapidary sticks, or blocks for cutting, polishing, grinding, drilling, or shaping.
- Measure sizes of stones' bore holes and cuts to ensure adherence to specifications, using precision measuring instruments.
- Select shaping wheels for tasks, and mix and apply abrasives, bort, or polishing compounds.
- Dismantle lapping, boring, cutting, polishing, and shaping equipment and machinery to clean and lubricate it.
- Advise customers and others on the best use of gems to create attractive jewelry items.
- Issue notices and recommend corrective actions when infractions or problems are found.
- Inspect vehicles or other equipment for evidence of abuse, damage, or mechanical malfunction.
- Inspect vehicles or equipment to ensure compliance with rules, standards, or regulations.
- Inspect repairs to transportation vehicles or equipment to ensure that repair work was performed properly.
- Identify modifications to engines, fuel systems, emissions control equipment, or other vehicle systems to determine the impact of modifications on inspection procedures or conclusions.
- Conduct remote inspections of motor vehicles, using handheld controllers and remotely directed vehicle inspection devices.
- Prepare reports on investigations or inspections and actions taken.
- Conduct visual inspections of emission control equipment and smoke emitted from gasoline or diesel vehicles.
- Conduct vehicle or transportation equipment tests, using diagnostic equipment.
- Investigate incidents or violations, such as delays, accidents, and equipment failures.
- Review commercial vehicle logs, shipping papers, or driver and equipment records to detect any problems or to ensure compliance with regulations.
- Attach onboard diagnostics (OBD) scanner cables to vehicles to conduct emissions inspections.
- Investigate complaints regarding safety violations.
- Examine carrier operating rules, employee qualification guidelines, or carrier training and testing programs for compliance with regulations or safety standards.
- Issue notices and recommend corrective actions when infractions or problems are found.
- Recommend remedial procedures to correct any violations found during inspections.
- Prepare and submit reports after completion of freight shipments.
- Inspect shipments to ensure that freight is securely braced and blocked.
- Record details about freight conditions, handling of freight, and any problems encountered.
- Advise crews in techniques of stowing dangerous and heavy cargo.
- Observe loading of freight to ensure that crews comply with procedures.
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.
- Notify workers of any special treatment required for shipments.
- Direct crews to reload freight or to insert additional bracing or packing as necessary.
- Check temperatures and humidities of shipping and storage areas to ensure that they are at appropriate levels to protect cargo.
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.
- Read draft markings to determine depths of vessels in water.
- Post warning signs on vehicles containing explosives or flammable or radioactive materials.
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.
- Visually inspect cargo for damage upon arrival or discharge.
- Recommend remedial procedures to correct any violations found during inspections.
- Determine causes of abnormal pressure variances, and make corrective recommendations, such as installation of pipes to relieve overloading.
- Monitor equipment functioning, observe temperature, level, and flow gauges, and perform regular unit checks to ensure that all equipment is operating as it should.
- Distribute or process gas for utility companies or industrial plants, using panel boards, control boards, and semi-automatic equipment.
- Control operation of compressors, scrubbers, evaporators, and refrigeration equipment to liquefy, compress, or regasify natural gas.
- Control equipment to regulate flow and pressure of gas to feedlines of boilers, furnaces, and related steam-generating or heating equipment.
- Record, review, and compile operations records, test results, and gauge readings such as temperatures, pressures, concentrations, and flows.
- Adjust temperature, pressure, vacuum, level, flow rate, or transfer of gas to maintain processes at required levels or to correct problems.
- Collaborate with other operators to solve unit problems.
- Monitor transportation and storage of flammable and other potentially dangerous products to ensure that safety guidelines are followed.
- Start and shut down plant equipment.
- Read logsheets to determine product demand and disposition, or to detect malfunctions.
- Contact maintenance crews when necessary.
- Test gas, chemicals, and air during processing to assess factors such as purity and moisture content, and to detect quality problems or gas or chemical leaks.
- Clean, maintain, and repair equipment, using hand tools, or request that repair and maintenance work be performed.
- Signal or direct workers who tend auxiliary equipment.
- Control fractioning columns, compressors, purifying towers, heat exchangers, and related equipment to extract nitrogen and oxygen from air.
- Calculate gas ratios to detect deviations from specifications, using testing apparatus.
- Operate construction equipment to install and maintain gas distribution systems.
- Change charts in recording meters.
- Determine causes of abnormal pressure variances, and make corrective recommendations, such as installation of pipes to relieve overloading.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Develop or implement actions such as lockouts, tagouts, or clearances to allow equipment to be safely repaired.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Record operating data, such as the results of surveillance tests.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Dispatch orders or instructions to personnel through radiotelephone or intercommunication systems to coordinate auxiliary equipment operation.
- Review and edit standard operating procedures.
- Conduct inspections or operations outside of control rooms as necessary.
- Direct reactor operators in emergency situations, in accordance with emergency operating procedures.
- Authorize maintenance activities on units or changes in equipment or system operational status.
- Supervise technicians' work activities to ensure that equipment is operated in accordance with policies and procedures that protect workers from radiation and ensure environmental safety.
- Authorize actions to correct identified operational inefficiencies or hazards so that operating efficiency is maximized and potential environmental issues are minimized.
- Direct the collection and testing of air, water, gas, or solid samples to determine radioactivity levels or to ensure appropriate radioactive containment.
- Direct measurement of the intensity or types of radiation in work areas, equipment, or materials.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Recommend or implement measures to motivate employees and to improve production methods, equipment performance, product quality, or efficiency.
- Enforce safety and sanitation regulations.
- Keep records of employees' attendance and hours worked.
- Inspect materials, products, or equipment to detect defects or malfunctions.
- Read and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs.
- Plan and establish work schedules, assignments, and production sequences to meet production goals.
- Confer with other supervisors to coordinate operations and activities within or between departments.
- Interpret specifications, blueprints, job orders, and company policies and procedures for workers.
- Observe work and monitor gauges, dials, and other indicators to ensure that operators conform to production or processing standards.
- Direct and coordinate the activities of employees engaged in the production or processing of goods, such as inspectors, machine setters, or fabricators.
- Conduct employee training in equipment operations or work and safety procedures, or assign employee training to experienced workers.
- Evaluate employee performance.
- Confer with management or subordinates to resolve worker problems, complaints, or grievances.
- Determine standards, budgets, production goals, and rates, based on company policies, equipment and labor availability, and workloads.
- Calculate labor and equipment requirements and production specifications, using standard formulas.
- Maintain operations data, such as time, production, and cost records, and prepare management reports of production results.
- Requisition materials, supplies, equipment parts, or repair services.
- Set up and adjust machines and equipment.
- Recommend or execute personnel actions, such as hirings, evaluations, or promotions.
- Plan and develop new products and production processes.
- Recommend or implement measures to motivate employees and to improve production methods, equipment performance, product quality, or efficiency.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Smooth, shape, and touch up surfaces to prepare them for finishing, using sandpaper, pumice stones, steel wool, chisels, sanders, or grinders.
- Remove accessories prior to finishing, and mask areas that should not be exposed to finishing processes or substances.
- Remove old finishes and damaged or deteriorated parts, using hand tools, stripping tools, sandpaper, steel wool, abrasives, solvents, or dip baths.
- Treat warped or stained surfaces to restore original contours and colors.
- Select appropriate finishing ingredients such as paint, stain, lacquer, shellac, or varnish, depending on factors such as wood hardness and surface type.
- Mix finish ingredients to obtain desired colors or shades.
- Remove excess solvent, using cloths soaked in paint thinner.
- Examine furniture to determine the extent of damage or deterioration, and to decide on the best method for repair or restoration.
- Distress surfaces with woodworking tools or abrasives before staining to create an antique appearance, or rub surfaces to bring out highlights and shadings.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Disassemble items to prepare them for finishing, using hand tools.
- Confer with customers to determine furniture colors or finishes.
- Wash surfaces to prepare them for finish application.
- Follow blueprints to produce specific designs.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Replace or refurbish upholstery of items, using tacks, adhesives, softeners, solvents, stains, or polish.
- Design, create, and decorate entire pieces or specific parts of furniture, such as draws for cabinets.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Recommend actions related to historical art, such as which items to add to a collection or which items to display in an exhibit.
- Gather historical data from sources such as archives, court records, diaries, news files, and photographs, as well as from books, pamphlets, and periodicals.
- Organize data, and analyze and interpret its authenticity and relative significance.
- Prepare publications and exhibits, or review those prepared by others, to ensure their historical accuracy.
- Organize information for publication and for other means of dissemination, such as via storage media or the Internet.
- Conduct historical research as a basis for the identification, conservation, and reconstruction of historic places and materials.
- Conserve and preserve manuscripts, records, and other artifacts.
- Present historical accounts in terms of individuals or social, ethnic, political, economic, or geographic groupings.
- Research the history of a particular country or region, or of a specific time period.
- Conduct historical research, and publish or present findings and theories.
- Determine which topics to research, or pursue research topics specified by clients or employers.
- Research and prepare manuscripts in support of public programming and the development of exhibits at historic sites, museums, libraries, and archives.
- Speak to various groups, organizations, and clubs to promote the aims and activities of historical societies.
- Advise or consult with individuals and institutions regarding issues such as the historical authenticity of materials or the customs of a specific historical period.
- Interview people to gather information about historical events and to record oral histories.
- Trace historical development in a particular field, such as social, cultural, political, or diplomatic history.
- Coordinate activities of workers engaged in cataloging and filing materials.
- Collect detailed information on individuals for use in biographies.
- Teach and conduct research in colleges, universities, museums, and other research agencies and schools.
- Edit historical society publications.
- Translate or request translation of reference materials.
- Coordinate artifact donations on behalf of a museum.
- Create and revise scripts for the tour guides.
- Write policies and procedures for archival collection care and research protocols.
- Recommend actions related to historical art, such as which items to add to a collection or which items to display in an exhibit.
- Recommend adjudication of product complaints.
- Coordinate efforts associated with the preparation of regulatory documents or submissions.
- Communicate with regulatory agencies regarding pre-submission strategies, potential regulatory pathways, compliance test requirements, or clarification and follow-up of submissions under review.
- Prepare or direct the preparation of additional information or responses as requested by regulatory agencies.
- Coordinate, prepare, or review regulatory submissions for domestic or international projects.
- Prepare or maintain technical files as necessary to obtain and sustain product approval.
- Interpret regulatory rules or rule changes and ensure that they are communicated through corporate policies and procedures.
- Determine the types of regulatory submissions or internal documentation that are required in situations such as proposed device changes or labeling changes.
- Coordinate recall or market withdrawal activities as necessary.
- Advise project teams on subjects such as premarket regulatory requirements, export and labeling requirements, or clinical study compliance issues.
- Review adverse drug reactions and file all related reports in accordance with regulatory agency guidelines.
- Review product promotional materials, labeling, batch records, specification sheets, or test methods for compliance with applicable regulations and policies.
- Identify relevant guidance documents, international standards, or consensus standards.
- Provide technical review of data or reports to be incorporated into regulatory submissions to assure scientific rigor, accuracy, and clarity of presentation.
- Review clinical protocols to ensure collection of data needed for regulatory submissions.
- Provide pre-, ongoing, and post-inspection follow-up assistance to governmental inspectors.
- Maintain current knowledge base of existing and emerging regulations, standards, or guidance documents.
- Recommend changes to company procedures in response to changes in regulations or standards.
- Participate in internal or external audits.
- Compile and maintain regulatory documentation databases or systems.
- Write or update standard operating procedures, work instructions, or policies.
- Obtain and distribute updated information regarding domestic or international laws, guidelines, or standards.
- Develop or track quality metrics.
- Develop or conduct employee regulatory training.
- Determine requirements applying to treatment, storage, shipment, or disposal of potentially hazardous production-related waste.
- Direct the collection and preparation of laboratory samples as requested by regulatory agencies.
- Prepare responses to customer requests for information, such as product data, written regulatory affairs statements, surveys, or questionnaires.
- Specialize in regulatory issues related to agriculture, such as the cultivation of green biotechnology crops or the post-market regulation of genetically altered crops.
- Determine regulations or procedures related to the management, collection, reuse, recovery, or recycling of packaging waste.
- Determine the legal implications of the production, supply, or use of ozone-depleting substances or equipment containing such substances.
- Develop regulatory strategies for products.
- Recommend adjudication of product complaints.
