- Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 2 | 3 | 2 | 51-4121.00 | Welders, Cutters, Solderers, and Brazers |
| 1 | 1 | 2 | 51-2023.00 | Electromechanical Equipment Assemblers |
| 1 | 1 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1 | 51-9022.00 | Grinding and Polishing Workers, Hand |
| 1 | 1 | 2 | 51-4122.00 | Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Hammer out bulges or bends in metal workpieces.
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Weld components in flat, vertical, or overhead positions.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
- Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
- Use fire suppression methods in industrial emergencies.
- Preheat workpieces prior to welding or bending, using torches or heating furnaces.
- Set up and use ladders and scaffolding as necessary to complete work.
- Operate metal shaping, straightening, and bending machines, such as brakes and shears.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Hammer out bulges or bends in metal workpieces.
- File, lap, and buff parts to fit, using hand and power tools.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- File, lap, and buff parts to fit, using hand and power tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Activate shears and grinders to trim workpieces.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Activate shears and grinders to trim workpieces.
- File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications.
- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
- Verify quality of finished workpieces by inspecting them, comparing them to templates, measuring their dimensions, or testing them in working machinery.
- Move controls to adjust, start, or stop equipment during grinding and polishing processes.
- Remove completed workpieces from equipment or work tables, using hand tools, and place workpieces in containers.
- Measure and mark equipment, objects, or parts to ensure grinding and polishing standards are met.
- Transfer equipment, objects, or parts to specified work areas, using moving devices.
- Trim, scrape, or deburr objects or parts, using chisels, scrapers, and other hand tools and equipment.
- Repair and maintain equipment, objects, or parts, using hand tools.
- Mark defects, such as knotholes, cracks, and splits, for repair.
- Study blueprints or layouts to determine how to lay out workpieces or saw out templates.
- Sharpen abrasive grinding tools, using machines and hand tools.
- Load and adjust workpieces onto equipment or work tables, using hand tools.
- Fill cracks or imperfections in marble with wax that matches the stone color.
- Record product and processing data on specified forms.
- Select files or other abrasives, according to materials, sizes and shapes of workpieces, amount of stock to be removed, finishes specified, and steps in finishing processes.
- Apply solutions and chemicals to equipment, objects, or parts, using hand tools.
- Clean brass particles from files by drawing file cards through file grooves.
- Spread emery powder or other polishing compounds on stone, or wet stone surfaces with hoses, and guide buffing wheels over stone to polish surfaces.
- Wash grit from stone, using hoses.
- File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Give directions to other workers regarding machine set-up and use.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Transfer components, metal products, or assemblies, using moving equipment.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Remove completed workpieces or parts from machinery, using hand tools.
- Tend auxiliary equipment used in welding processes.
- Load or feed workpieces into welding machines to join or bond components.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Record operational information on specified production reports.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Anneal finished workpieces to relieve internal stress.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Swage fittings onto cables, using swaging machines.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Install accessories in swaging machines, using hand tools.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Splice cables, using clamps and fittings, or reweave cable strands.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Monitor robotic assembly equipment, such as snake-arm robots, used to assemble, seal, or swage aircraft structures.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
