- Position patterns inside mold sections, and clamp sections together.
Occupations with related tasks Save Table: XLSX CSV
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
- Clean and maintain tools and equipment, using solvents, brushes, and rags.
- Read job orders and inspect workpieces to determine work procedures and materials required.
- Immerse workpieces into coating materials for specified times.
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Melt or heat coating materials to specified temperatures.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Cut out sections in surfaces of materials to be inlaid with decorative pieces, using patterns and knives or scissors.
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Align and secure pattern film on reference tables of optical programmers, and observe enlarger scope views of printed circuit boards.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Write instruction sheets and cutter lists for a machine's controller to guide setup and encode numerical control tapes.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Modify existing programs to enhance efficiency.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Sort shop orders into groups to maximize materials utilization and minimize machine setup time.
- Compare encoded tapes or computer printouts with original part specifications and blueprints to verify accuracy of instructions.
- Perform preventative maintenance or minor repairs on machines.
- Prepare geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper.
- Draw machine tool paths on pattern film according to guidelines for tool speed and efficiency, using colored markers.
- Enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers.
- Align and secure pattern film on reference tables of optical programmers, and observe enlarger scope views of printed circuit boards.
- Position and cut out master or sample patterns, using scissors and knives, or print out copies of patterns, using computers.
- Create a master pattern for each size within a range of garment sizes, using charts, drafting instruments, computers, or grading devices.
- Input specifications into computers to assist with pattern design and pattern cutting.
- Draw details on outlined parts to indicate where parts are to be joined, as well as the positions of pleats, pockets, buttonholes, and other features, using computers or drafting instruments.
- Make adjustments to patterns after fittings.
- Compute dimensions of patterns according to sizes, considering stretching of material.
- Mark samples and finished patterns with information, such as garment size, section, style, identification, and sewing instructions.
- Draw outlines of pattern parts by adapting or copying existing patterns, or by drafting new patterns.
- Test patterns by making and fitting sample garments.
- Create a paper pattern from which to mass-produce a design concept.
- Discuss design specifications with designers, and convert their original models of garments into patterns of separate parts that can be laid out on a length of fabric.
- Examine sketches, sample articles, and design specifications to determine quantities, shapes, and sizes of pattern parts, and to determine the amount of material or fabric required to make a product.
- Determine the best layout of pattern pieces to minimize waste of material, and mark fabric accordingly.
- Create design specifications to provide instructions on garment sewing and assembly.
- Trace outlines of paper onto cardboard patterns, and cut patterns into parts to make templates.
- Trace outlines of specified patterns onto material, and cut fabric, using scissors.
- Position and cut out master or sample patterns, using scissors and knives, or print out copies of patterns, using computers.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Fold or shape materials before or after cutting them.
- Replace or sharpen dulled cutting tools such as saws.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Adjust guides and stops to control depths and widths of cuts.
- Count or weigh and bundle items.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Inspect products to ensure that the quality standards and specifications are met.
- Start machines, monitor operations, and make adjustments as needed.
- Adjust machine controls, such as heating mechanisms, tensions, or speeds, to produce specified products.
- Record information about work completed and machine settings.
- Notify supervisors of mechanical malfunctions.
- Inspect machinery to determine whether repairs are needed.
- Confer with coworkers to obtain information about orders, processes, or problems.
- Repair or replace worn or defective parts or components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Operate machines to cut multiple layers of fabric into parts for articles such as canvas goods, house furnishings, garments, hats, or stuffed toys.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Program electronic equipment.
- Study guides, samples, charts, and specification sheets or confer with supervisors or engineering staff to determine set-up requirements.
- Stop machines when specified amounts of product have been produced.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Position patterns of garment parts on fabric, and cut fabric along outlines, using scissors.
- Measure parts, such as sleeves or pant legs, and mark or pin-fold alteration lines.
- Remove stitches from garments to be altered, using rippers or razor blades.
- Sew garments, using needles and thread or sewing machines.
- Let out or take in seams in suits and other garments to improve fit.
- Measure customers, using tape measures, and record measurements.
- Fit and study garments on customers to determine required alterations.
- Trim excess material, using scissors.
- Assemble garment parts and join parts with basting stitches, using needles and thread or sewing machines.
- Make garment style changes, such as tapering pant legs, narrowing lapels, and adding or removing padding.
- Maintain garment drape and proportions as alterations are performed.
- Take up or let down hems to shorten or lengthen garment parts, such as sleeves.
- Repair or replace defective garment parts, such as pockets, zippers, snaps, buttons, and linings.
- Press garments, using hand irons or pressing machines.
- Fit, alter, repair, and make made-to-measure clothing, according to customers' and clothing manufacturers' specifications and fit, and applying principles of garment design, construction, and styling.
- Estimate how much a garment will cost to make, based on factors such as time and material requirements.
- Record required alterations and instructions on tags, and attach them to garments.
- Confer with customers to determine types of material and garment styles desired.
- Examine tags on garments to determine alterations that are needed.
- Develop, copy, or adapt designs for garments, and design patterns to fit measurements, applying knowledge of garment design, construction, styling, and fabric.
- Put in padding and shaping materials.
- Sew buttonholes and attach buttons to finish garments.
- Position patterns of garment parts on fabric, and cut fabric along outlines, using scissors.
- Position and mark patterns on materials to prepare for sewing.
- Monitor machine operation to detect problems such as defective stitching, breaks in thread, or machine malfunctions.
- Place spools of thread, cord, or other materials on spindles, insert bobbins, and thread ends through machine guides and components.
- Position items under needles, using marks on machines, clamps, templates, or cloth as guides.
- Guide garments or garment parts under machine needles and presser feet to sew parts together.
- Remove holding devices and finished items from machines.
- Match cloth pieces in correct sequences prior to sewing them, and verify that dye lots and patterns match.
- Fold or stretch edges or lengths of items while sewing to facilitate forming specified sections.
- Cut excess material or thread from finished products.
- Select supplies such as fasteners and thread, according to job requirements.
- Examine and measure finished articles to verify conformance to standards, using rulers.
- Start and operate or tend machines, such as single or double needle serging and flat-bed felling machines, to automatically join, reinforce, or decorate material or articles.
- Record quantities of materials processed.
- Turn knobs, screws, and dials to adjust settings of machines, according to garment styles and equipment performance.
- Attach tape, trim, appliques, or elastic to specified garments or garment parts, according to item specifications.
- Repair or alter items by adding replacement parts or missing stitches.
- Perform equipment maintenance tasks such as replacing needles, sanding rough areas of needles, or cleaning and oiling sewing machines.
- Mount attachments, such as needles, cutting blades, or pattern plates, and adjust machine guides according to specifications.
- Cut materials according to specifications, using blades, scissors, or electric knives.
- Inspect garments, and examine repair tags and markings on garments to locate defects or damage, and mark errors as necessary.
- Attach buttons, hooks, zippers, fasteners, or other accessories to fabric, using feeding hoppers or clamp holders.
- Position material or articles in clamps, templates, or hoop frames prior to automatic operation of machines.
- Draw markings or pin appliques on fabric to obtain variations in design.
- Tape or twist together thread or cord to repair breaks.
- Baste edges of material to align and temporarily secure parts for final assembly.
- Perform specialized or automatic sewing machine functions, such as buttonhole making or tacking.
- Position and mark patterns on materials to prepare for sewing.
- Draw patterns, using measurements, designs, plaster casts, or customer specifications, and position or outline patterns on work pieces.
- Dye, soak, polish, paint, stamp, stitch, stain, buff, or engrave leather or other materials to obtain desired effects, decorations, or shapes.
- Cut out parts, following patterns or outlines, using knives, shears, scissors, or machine presses.
- Construct, decorate, or repair leather products according to specifications, using sewing machines, needles and thread, leather lacing, glue, clamps, hand tools, or rivets.
- Repair and recondition leather products such as trunks, luggage, shoes, saddles, belts, purses, and baseball gloves.
- Align and stitch or glue materials such as fabric, fleece, leather, or wood, to join parts.
- Inspect articles for defects, and remove damaged or worn parts, using hand tools.
- Drill or punch holes and insert or attach metal rings, handles, and fastening hardware, such as buckles.
- Prepare inserts, heel pads, and lifts from casts of customers' feet.
- Dress and otherwise finish boots or shoes, as by trimming the edges of new soles and heels to the shoe shape.
- Attach insoles to shoe lasts, affix shoe uppers, and apply heels and outsoles.
- Clean and polish shoes.
- Cement, nail, or sew soles and heels to shoes.
- Check the texture, color, and strength of leather to ensure that it is adequate for a particular purpose.
- Shape shoe heels with a knife, and sand them on a buffing wheel for smoothness.
- Place shoes on lasts to remove soles and heels, using knives or pliers.
- Repair or replace soles, heels, and other parts of footwear, using sewing, buffing and other shoe repair machines, materials, and equipment.
- Cut, insert, position, and secure paddings, cushioning, or linings, using stitches or glue.
- Estimate the costs of requested products or services such as custom footwear or footwear repair, and receive payment from customers.
- Nail heel and toe cleats onto shoes.
- Re-sew seams, and replace handles and linings of suitcases or handbags.
- Stretch shoes, dampening parts and inserting and twisting parts, using an adjustable stretcher.
- Read prescriptions or specifications, and take measurements to establish the type of product to be made, using calipers, tape measures, or rules.
- Attach accessories or ornamentation to decorate or protect products.
- Make, modify, and repair orthopedic or therapeutic footwear according to doctors' prescriptions, or modify existing footwear for people with foot problems and special needs.
- Select materials and patterns, and trace patterns onto materials to be cut out.
- Measure customers for fit, and discuss with them the type of footwear to be made, recommending details such as leather quality.
- Draw patterns, using measurements, designs, plaster casts, or customer specifications, and position or outline patterns on work pieces.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
