- Remove clogs, defects, or impurities from machines, tanks, conveyors, screens, or other processing equipment.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 2 | 4 | 2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 1 | 2 | 2 | 51-9191.00 | Adhesive Bonding Machine Operators and Tenders |
| 1 | 2 | 2 | 51-9051.00 | Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders |
| 1 | 2 | 2 | 51-9023.00 | Mixing and Blending Machine Setters, Operators, and Tenders |
| 1 | 2 | 2 | 51-9111.00 | Packaging and Filling Machine Operators and Tenders 
|
| 1 | 2 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 2 | 51-9021.00 | Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-9193.00 | Cooling and Freezing Equipment Operators and Tenders
|
| 1 | 1 | 2 | 51-3091.00 | Food and Tobacco Roasting, Baking, and Drying Machine Operators and Tenders |
| 1 | 1 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Clear machine jams, using hand tools.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Mount and bolt sawing blades or attachments to machine shafts.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Count, sort, or stack finished workpieces.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Pull tables back against stops and depress pedals to advance cutterheads that shape stock ends.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Unload and roll logs from trucks to sawmill decks or to carriages, or move logs in ponds, using pike poles.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Clear machine jams, using hand tools.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Remove jammed materials from machines and readjust components as necessary to resume normal operations.
- Clean and maintain gluing and cementing machines, using solutions, lubricants, brushes, and scrapers.
- Align and position materials being joined to ensure accurate application of adhesive or heat sealing.
- Adjust machine components according to specifications such as widths, lengths, and thickness of materials and amounts of glue, cement, or adhesive required.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Start machines, and turn valves or move controls to feed, admit, apply, or transfer materials and adhesives, and to adjust temperature, pressure, and time settings.
- Fill machines with glue, cement, or adhesives.
- Perform test production runs and make adjustments as necessary to ensure that completed products meet standards and specifications.
- Examine and measure completed materials or products to verify conformance to specifications, using measuring devices such as tape measures, gauges, or calipers.
- Read work orders and communicate with coworkers to determine machine and equipment settings and adjustments and supply and product specifications.
- Remove and stack completed materials or products, and restock materials to be joined.
- Observe gauges, meters, and control panels to obtain information about equipment temperatures and pressures, or the speed of feeders or conveyors.
- Maintain production records such as quantities, dimensions, and thicknesses of materials processed.
- Mount or load material such as paper, plastic, wood, or rubber in feeding mechanisms of cementing or gluing machines.
- Transport materials, supplies, and finished products between storage and work areas, using forklifts.
- Measure and mix ingredients to prepare glue.
- Depress pedals to lower electrodes that heat and seal edges of material.
- Remove jammed materials from machines and readjust components as necessary to resume normal operations.
- Clean and maintain gluing and cementing machines, using solutions, lubricants, brushes, and scrapers.
- Stop equipment and clear blockages or jams, using fingers, wire, or hand tools.
- Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
- Monitor equipment operation, gauges, and panel lights to detect deviations from standards.
- Confer with supervisors or other equipment operators to report equipment malfunctions or to resolve production problems.
- Press and adjust controls to activate, set, and regulate equipment according to specifications.
- Record gauge readings, test results, and shift production in log books.
- Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules.
- Examine or test samples of processed substances, or collect samples for laboratory testing, to ensure conformance to specifications.
- Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists.
- Load equipment receptacles or conveyors with material to be processed, by hand or using hoists.
- Remove products from equipment, manually or using hoists, and prepare them for storage, shipment, or additional processing.
- Calculate amounts of materials to be loaded into furnaces, adjusting amounts as necessary for specific conditions.
- Melt or refine metal before casting, calculating required temperatures, and observe metal color, adjusting controls as necessary to maintain required temperatures.
- Weigh or measure specified amounts of ingredients or materials for processing, using devices such as scales and calipers.
- Direct crane operators and crew members to load vessels with materials to be processed.
- Feed fuel, such as coal and coke, into fireboxes or onto conveyors, and remove ashes from furnaces, using shovels and buckets.
- Replace worn or defective equipment parts, using hand tools.
- Sprinkle chemicals on the surface of molten metal to bring impurities to surface and remove impurities, using strainers.
- Stop equipment and clear blockages or jams, using fingers, wire, or hand tools.
- Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
- Dislodge and clear jammed materials or other items from machinery or equipment, using hand tools.
- Clean and maintain equipment, using hand tools.
- Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
- Read work orders to determine production specifications or information.
- Observe production or monitor equipment to ensure safe and efficient operation.
- Mix or blend ingredients by starting machines and mixing for specified times.
- Stop mixing or blending machines when specified product qualities are obtained and open valves and start pumps to transfer mixtures.
- Compound or process ingredients or dyes, according to formulas.
- Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards.
- Operate or tend machines to mix or blend any of a wide variety of materials, such as spices, dough batter, tobacco, fruit juices, chemicals, livestock feed, food products, color pigments, or explosive ingredients.
- Dump or pour specified amounts of materials into machinery or equipment.
- Record operational or production data on specified forms.
- Collect samples of materials or products for laboratory testing.
- Unload mixtures into containers or onto conveyors for further processing.
- Clean work areas.
- Add or mix chemicals or ingredients for processing, using hand tools or other devices.
- Tend accessory equipment, such as pumps or conveyors, to move materials or ingredients through production processes.
- Transfer materials, supplies, or products between work areas, using moving equipment or hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Open valves to drain slurry from mixers into storage tanks.
- Dislodge and clear jammed materials or other items from machinery or equipment, using hand tools.
- Clean and maintain equipment, using hand tools.
- Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
- Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.
- Attach identification labels to finished packaged items, or cut stencils and stencil information on containers, such as lot numbers or shipping destinations.
- Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications.
- Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
- Remove finished packaged items from machine and separate rejected items.
- Monitor the production line, watching for problems such as pile-ups, jams, or glue that isn't sticking properly.
- Inspect and remove defective products and packaging material.
- Start machine by engaging controls.
- Tend or operate machine that packages product.
- Regulate machine flow, speed, or temperature.
- Adjust machine components and machine tension and pressure according to size or processing angle of product.
- Supply materials to spindles, conveyors, hoppers, or other feeding devices and unload packaged product.
- Stack finished packaged items, or wrap protective material around each item, and pack the items in cartons or containers.
- Package the product in the form in which it will be sent out, for example, filling bags with flour from a chute or spout.
- Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels.
- Count and record finished and rejected packaged items.
- Clean packaging containers, line and pad crates, or assemble cartons to prepare for product packing.
- Secure finished packaged items by hand tying, sewing, gluing, stapling, or attaching fastener.
- Clean and remove damaged or otherwise inferior materials to prepare raw products for processing.
- Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
- Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Clean, adjust, and maintain equipment, using hand tools.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Examine materials, ingredients, or products, visually or with hands, to ensure conformance to established standards.
- Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
- Weigh or measure materials, ingredients, or products at specified intervals to ensure conformance to requirements.
- Read work orders to determine production specifications and information.
- Tend accessory equipment, such as pumps and conveyors, to move materials or ingredients through production processes.
- Record data from operations, testing, and production on specified forms.
- Load materials into machinery and equipment, using hand tools.
- Clean work areas.
- Notify supervisors of needed repairs.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Reject defective products and readjust equipment to eliminate problems.
- Inspect chains, belts, or scrolls for signs of wear.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Collect samples of materials or products for laboratory testing.
- Set mill gauges to specified fineness of grind.
- Mark bins as to types of mixtures stored.
- Turn valves to regulate the moisture contents of materials.
- Add or mix chemicals and ingredients for processing, using hand tools or other devices.
- Break mixtures to size, using picks.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Clean, adjust, and maintain equipment, using hand tools.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Record temperatures, amounts of materials processed, or test results on report forms.
- Monitor pressure gauges, ammeters, flowmeters, thermometers, or products, and adjust controls to maintain specified conditions, such as feed rate, product consistency, temperature, air pressure, and machine speed.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Start machinery, such as pumps, feeders, or conveyors, and turn valves to heat, admit, or transfer products, refrigerants, or mixes.
- Assemble equipment, and attach pipes, fittings, or valves, using hand tools.
- Measure or weigh specified amounts of ingredients or materials, and load them into tanks, vats, hoppers, or other equipment.
- Adjust machine or freezer speed and air intake to obtain desired consistency and amount of product.
- Weigh packages and adjust freezer air valves or switches on filler heads to obtain specified amounts of product in each container.
- Inspect and flush lines with solutions or steam, and spray equipment with sterilizing solutions.
- Load and position wrapping paper, sticks, bags, or cartons into dispensing machines.
- Sample and test product characteristics such as specific gravity, acidity, and sugar content, using hydrometers, pH meters, or refractometers.
- Start agitators to blend contents, or start beater, scraper, and expeller blades to mix contents with air and prevent sticking.
- Place or position containers into equipment, and remove containers after completion of cooling or freezing processes.
- Scrape, dislodge, or break excess frost, ice, or frozen product from equipment to prevent accumulation, using hands and hand tools.
- Activate mechanical rakes to regulate flow of ice from storage bins to vats.
- Stir material with spoons or paddles to mix ingredients or allow even cooling and prevent coagulation.
- Position molds on conveyors, and measure and adjust level of fill, using depth gauges.
- Insert forming fixtures, and start machines that cut frozen products into measured portions or specified shapes.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Observe, feel, taste, or otherwise examine products during and after processing to ensure conformance to standards.
- Set temperature and time controls, light ovens, burners, driers, or roasters, and start equipment, such as conveyors, cylinders, blowers, driers, or pumps.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Record production data, such as weight and amount of product processed, type of product, and time and temperature of processing.
- Weigh or measure products, using scale hoppers or scale conveyors.
- Operate or tend equipment that roasts, bakes, dries, or cures food items such as cocoa and coffee beans, grains, nuts, and bakery products.
- Signal coworkers to synchronize flow of materials.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Fill or remove product from trays, carts, hoppers, or equipment, using scoops, peels, or shovels, or by hand.
- Take product samples during or after processing for laboratory analyses.
- Test products for moisture content, using moisture meters.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Open valves, gates, or chutes or use shovels to load or remove products from ovens or other equipment.
- Clean equipment with steam, hot water, and hoses.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Dump sugar dust from collectors into melting tanks and add water to reclaim sugar lost during processing.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Clear jams, and remove defective or substandard materials or products.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Thread extruded strips through water tanks and hold-down bars, or attach strands to wires and draw them through tubes.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Ignite burners to preheat products, or use torches to apply heat.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Clear jams, and remove defective or substandard materials or products.
