- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
Occupations with related tasks Save Table: XLSX CSV
- Move trailing electrical cables clear of obstructions, using rubber safety gloves.
- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
- Push or ride cars down slopes, or hook cars to cables and control cable drum brakes, to ease cars down inclines.
- Handle high voltage sources and hang electrical cables.
- Drive loaded shuttle cars to ramps and move controls to discharge loads into mine cars or onto conveyors.
- Pry off loose material from roofs and move it into the paths of machines, using crowbars.
- Control conveyors that run the entire length of shuttle cars to distribute loads as loading progresses.
- Observe hand signals, grade stakes, or other markings when operating machines.
- Examine roadway and clear obstructions from the path of travel.
- Drive machines into piles of material blasted from working faces.
- Operate levers to move conveyor booms or shovels so that mine contents such as coal, rock, and ore can be placed into cars or onto conveyors.
- Clean, fuel, service, and perform safety checks on all equipment, and repair and replace parts as necessary.
- Clean hoppers, and clean spillage from tracks, walks, driveways, and conveyor decking.
- Oil, lubricate, and adjust conveyors, crushers, and other equipment, using hand tools and lubricating equipment.
- Monitor loading processes to ensure that materials are loaded according to specifications.
- Measure, weigh, or verify levels of rock, gravel, or other excavated material to prevent equipment overloads.
- Replace hydraulic hoses, headlight bulbs, and gathering-arm teeth.
- Stop gathering arms when cars are full.
- Advance machines to gather material and convey it into cars.
- Signal workers to move loaded cars.
- Guide and stop cars by switching, applying brakes, or placing scotches, or wooden wedges, between wheels and rails.
- Observe and record car numbers, carriers, customers, tonnages, and grades and conditions of material.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
- Maintain records of materials moved.
- Direct other workers to move stakes, place blocks, position anchors or cables, or move materials.
- Move trailing electrical cables clear of obstructions, using rubber safety gloves.
- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
- Push or ride cars down slopes, or hook cars to cables and control cable drum brakes, to ease cars down inclines.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Operate elevator systems in conjunction with conveyor systems.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Operate consoles to control automatic palletizing equipment.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Affix identifying information to materials or products, using hand tools.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Check all load-related documentation for completeness and accuracy.
- Inspect loads to ensure that cargo is secure.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
- Crank trailer landing gear up or down to safely secure vehicles.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
- Read bills of lading to determine assignment details.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
- Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
- Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Drive trucks with capacities greater than 13 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
- Read and interpret maps to determine vehicle routes.
- Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
- Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
- Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
- Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
- Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
- Remove debris from loaded trailers.
- Follow appropriate safety procedures for transporting dangerous goods.
- Inventory and inspect goods to be moved to determine quantities and conditions.
- Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
- Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
- Give directions to laborers who are packing goods and moving them onto trailers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Pull knuckles to open them for coupling.
- Provide assistance in aligning drawbars, using available equipment to lift, pull, or push on the drawbars.
- Observe and respond to wayside and cab signals, including color light signals, position signals, torpedoes, flags, and hot box detectors.
- Inspect engines before and after use to ensure proper operation.
- Apply and release hand brakes.
- Signal crew members for movement of engines or trains, using lanterns, hand signals, radios, or telephones.
- Confer with conductors and other workers via radiotelephones or computers to exchange switching information.
- Inspect track for defects such as broken rails and switch malfunctions.
- Observe water levels and oil, air, and steam pressure gauges to ensure proper operation of equipment.
- Couple and uncouple air hoses and electrical connections between cars.
- Drive engines within railroad yards or other establishments to couple, uncouple, or switch railroad cars.
- Inspect the condition of stationary trains, rolling stock, and equipment.
- Read switching instructions and daily car schedules to determine work to be performed, or receive orders from yard conductors.
- Receive, relay, and act upon instructions and inquiries from train operations and customer service center personnel.
- Spot cars for loading and unloading at customer locations.
- Operate track switches, derails, automatic switches, and retarders to change routing of train or cars.
- Report arrival and departure times, train delays, work order completion, and time on duty.
- Perform routine repair and maintenance duties.
- Drive locomotives to and from various stations in roundhouses to have locomotives cleaned, serviced, repaired, or supplied.
- Ride on moving cars by holding onto grab irons and standing on ladder steps.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Operate flatcars equipped with derricks or railcars to transport personnel or equipment.
- Provide assistance in the installation or repair of rails and ties.
- Pull knuckles to open them for coupling.
- Provide assistance in aligning drawbars, using available equipment to lift, pull, or push on the drawbars.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect crane site conditions to determine ground stability.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Determine load weights and check them against lifting capacities to prevent overload.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Move or reposition hoists, winches, loads and materials, manually or using equipment and machines such as trucks, cars, and hand trucks.
- Signal and assist other workers loading or unloading materials.
- Observe equipment gauges and indicators and hand signals of other workers to verify load positions or depths.
- Start engines of hoists or winches and use levers and pedals to wind or unwind cable on drums.
- Apply hand or foot brakes and move levers to lock hoists or winches.
- Repair, maintain, and adjust equipment, using hand tools.
- Tend auxiliary equipment, such as jacks, slings, cables, or stop blocks, to facilitate moving items or materials for further processing.
- Move levers, pedals, and throttles to stop, start, and regulate speeds of hoist or winch drums in response to hand, bell, buzzer, telephone, loud-speaker, or whistle signals, or by observing dial indicators or cable marks.
- Select loads or materials according to weight and size specifications.
- Attach, fasten, and disconnect cables or lines to loads, materials, and equipment, using hand tools.
- Oil winch drums so that cables will wind smoothly.
- Operate compressed air, diesel, electric, gasoline, or steam-driven hoists or winches to control movement of cableways, cages, derricks, draglines, loaders, railcars, or skips.
- Climb ladders to position and set up vehicle-mounted derricks.
- Move or reposition hoists, winches, loads and materials, manually or using equipment and machines such as trucks, cars, and hand trucks.
- Signal and assist other workers loading or unloading materials.
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Maintain equipment storage areas to ensure that inventory is protected.
- Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
- Move freight, stock, or other materials to and from storage or production areas, loading docks, delivery vehicles, ships, or containers, by hand or using trucks, tractors, or other equipment.
- Sort cargo before loading and unloading.
- Attach identifying tags to containers or mark them with identifying information.
- Record numbers of units handled or moved, using daily production sheets or work tickets.
- Attach slings, hooks, or other devices to lift cargo and guide loads.
- Carry needed tools or supplies from storage or trucks and return them after use.
- Pack containers and re-pack damaged containers.
- Assemble product containers or crates, using hand tools and precut lumber.
- Adjust controls to guide, position, or move equipment, such as cranes, booms, or cameras.
- Connect electrical equipment to power sources so that it can be tested before use.
- Inspect products for damage or leaks.
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Seal outlet valves on tank cars, barges, and trucks.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
