- Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
Occupations with related tasks Save Table: XLSX CSV
- Operate shredding and chipping equipment, and feed limbs and brush into the machines.
- Operate boom trucks, loaders, stump chippers, brush chippers, tractors, power saws, trucks, sprayers, and other equipment and tools.
- Cut away dead and excess branches from trees, or clear branches around power lines, using climbing equipment or buckets of extended truck booms, or chainsaws, hooks, handsaws, shears, and clippers.
- Hoist tools and equipment to tree trimmers, and lower branches with ropes or block and tackle.
- Prune, cut down, fertilize, and spray trees as directed by tree surgeons.
- Scrape decayed matter from cavities in trees and fill holes with cement to promote healing and to prevent further deterioration.
- Spray trees to treat diseased or unhealthy trees, including mixing chemicals and calibrating spray equipment.
- Apply tar or other protective substances to cut surfaces or seal surfaces and to protect them from fungi and insects.
- Split logs or wooden blocks into bolts, pickets, posts, or stakes, using hand tools such as ax wedges, sledgehammers, and mallets.
- Clean, sharpen, and lubricate tools and equipment.
- Climb trees, using climbing hooks and belts, or climb ladders to gain access to work areas.
- Supervise others engaged in tree trimming work and train lower-level employees.
- Trim, top, and reshape trees to achieve attractive shapes or to remove low-hanging branches.
- Load debris and refuse onto trucks and haul it away for disposal.
- Inspect trees to determine if they have diseases or pest problems.
- Provide information to the public regarding trees, such as advice on tree care.
- Trim jagged stumps, using saws or pruning shears.
- Clear sites, streets, and grounds of woody and herbaceous materials, such as tree stumps and fallen trees and limbs.
- Collect debris and refuse from tree trimming and removal operations into piles, using shovels, rakes, or other tools.
- Cable, brace, tie, bolt, stake, and guy trees and branches to provide support.
- Plan and develop budgets for tree work, and estimate the monetary value of trees.
- Remove broken limbs from wires, using hooked extension poles.
- Water, root-feed, and fertilize trees.
- Install lightning protection on trees.
- Transplant and remove trees and shrubs, and prepare trees for moving.
- Harvest tanbark by cutting rings and slits in bark and stripping bark from trees, using spuds or axes.
- Operate shredding and chipping equipment, and feed limbs and brush into the machines.
- Operate boom trucks, loaders, stump chippers, brush chippers, tractors, power saws, trucks, sprayers, and other equipment and tools.
- Cut away dead and excess branches from trees, or clear branches around power lines, using climbing equipment or buckets of extended truck booms, or chainsaws, hooks, handsaws, shears, and clippers.
- Hoist tools and equipment to tree trimmers, and lower branches with ropes or block and tackle.
- Prune, cut down, fertilize, and spray trees as directed by tree surgeons.
- Scrape decayed matter from cavities in trees and fill holes with cement to promote healing and to prevent further deterioration.
- Spray trees to treat diseased or unhealthy trees, including mixing chemicals and calibrating spray equipment.
- Apply tar or other protective substances to cut surfaces or seal surfaces and to protect them from fungi and insects.
- Split logs or wooden blocks into bolts, pickets, posts, or stakes, using hand tools such as ax wedges, sledgehammers, and mallets.
- Mix pesticides, herbicides, or fungicides for application to trees, shrubs, lawns, or botanical crops.
- Fill sprayer tanks with water and chemicals, according to formulas.
- Lift, push, and swing nozzles, hoses, and tubes to direct spray over designated areas.
- Cover areas to specified depths with pesticides, applying knowledge of weather conditions, droplet sizes, elevation-to-distance ratios, and obstructions.
- Start motors and engage machinery, such as sprayer agitators or pumps or portable spray equipment.
- Connect hoses and nozzles selected according to terrain, distribution pattern requirements, types of infestations, and velocities.
- Plant grass with seed spreaders, and operate straw blowers to cover seeded areas with mixtures of asphalt and straw.
- Identify lawn or plant diseases to determine the appropriate course of treatment.
- Clean or service machinery to ensure operating efficiency, using water, gasoline, lubricants, or hand tools.
- Provide driving instructions to truck drivers to ensure complete coverage of designated areas, using hand and horn signals.
- Mix pesticides, herbicides, or fungicides for application to trees, shrubs, lawns, or botanical crops.
- Fill sprayer tanks with water and chemicals, according to formulas.
- Lift, push, and swing nozzles, hoses, and tubes to direct spray over designated areas.
- Cover areas to specified depths with pesticides, applying knowledge of weather conditions, droplet sizes, elevation-to-distance ratios, and obstructions.
- Start motors and engage machinery, such as sprayer agitators or pumps or portable spray equipment.
- Connect hoses and nozzles selected according to terrain, distribution pattern requirements, types of infestations, and velocities.
- Plant grass with seed spreaders, and operate straw blowers to cover seeded areas with mixtures of asphalt and straw.
- Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
- Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Spray insecticides or fumigants to prevent insect or rodent infestation.
- Service, clean, or supply restrooms.
- Gather and empty trash.
- Clean building floors by sweeping, mopping, scrubbing, or vacuuming.
- Monitor building security and safety by performing tasks such as locking doors after operating hours or checking electrical appliance use to ensure that hazards are not created.
- Notify managers concerning the need for major repairs or additions to building operating systems.
- Clean windows, glass partitions, or mirrors, using soapy water or other cleaners, sponges, or squeegees.
- Requisition supplies or equipment needed for cleaning and maintenance duties.
- Dust furniture, walls, machines, or equipment.
- Clean and polish furniture and fixtures.
- Move heavy furniture, equipment, or supplies, either manually or with hand trucks.
- Strip, seal, finish, and polish floors.
- Remove snow from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow-melting chemicals.
- Make adjustments or minor repairs to heating, cooling, ventilating, plumbing, or electrical systems.
- Drive vans, industrial trucks, or other vehicles required to travel to, or to perform, cleaning work.
- Set up, arrange, or remove decorations, tables, chairs, ladders, or scaffolding to prepare facilities for events, such as banquets or meetings.
- Clean chimneys, flues, and connecting pipes, using power or hand tools.
- Steam-clean or shampoo carpets.
- Clean laboratory equipment, such as glassware or metal instruments, using solvents, brushes, rags, or power cleaning equipment.
- Clean and restore building interiors damaged by fire, smoke, or water, using commercial cleaning equipment.
- Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
- Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Spray insecticides or fumigants to prevent insect or rodent infestation.
- Spray or dust chemical solutions, powders, or gases into rooms, onto clothing, furnishings, or wood, or over marshlands, ditches, or catch basins.
- Dig up and burn weeds, or spray them with herbicides.
- Set mechanical traps, or place poisonous paste or bait in sewers, burrows, or ditches.
- Cut or bore openings in building or surrounding concrete, access infested areas, insert nozzle, and inject pesticide to impregnate ground.
- Clean and remove blockages from infested areas to facilitate spraying procedures and provide drainage, using brooms, mops, shovels, or rakes.
- Record work activities performed.
- Inspect premises to identify infestation source and extent of damage to property, wall, or roof porosity and access to infested locations.
- Recommend treatment and prevention methods for pest problems to clients.
- Clean work site after completion of job.
- Drive truck equipped with power spraying equipment.
- Measure area dimensions requiring treatment, calculate fumigant requirements, and estimate cost for service.
- Study preliminary reports or diagrams of infested area and determine treatment type required to eliminate and prevent recurrence of infestation.
- Direct, or assist other workers in, treatment or extermination processes to eliminate or control rodents, insects, or weeds.
- Post warning signs and lock building doors to secure area to be fumigated.
- Position and fasten edges of tarpaulins over building, and tape vents to ensure air-tight environment and to check for leaks.
- Spray or dust chemical solutions, powders, or gases into rooms, onto clothing, furnishings, or wood, or over marshlands, ditches, or catch basins.
- Dig up and burn weeds, or spray them with herbicides.
- Set mechanical traps, or place poisonous paste or bait in sewers, burrows, or ditches.
- Cut or bore openings in building or surrounding concrete, access infested areas, insert nozzle, and inject pesticide to impregnate ground.
- Clean and remove blockages from infested areas to facilitate spraying procedures and provide drainage, using brooms, mops, shovels, or rakes.
- Apply poisons along roadsides and in animal burrows to eliminate unwanted roadside vegetation and rodents.
- Paint traffic control lines and place pavement traffic messages, by hand or using machines.
- Blend compounds to form adhesive mixtures used for marker installation.
- Set out signs and cones around work areas to divert traffic.
- Flag motorists to warn them of obstacles or repair work ahead.
- Perform preventative maintenance on vehicles and heavy equipment.
- Drive trucks to transport crews and equipment to work sites.
- Erect, install, or repair guardrails, road shoulders, berms, highway markers, warning signals, and highway lighting, using hand tools and power tools.
- Clean and clear debris from culverts, catch basins, drop inlets, ditches, and other drain structures.
- Drive heavy equipment and vehicles with adjustable attachments to sweep debris from paved surfaces, mow grass and weeds, remove snow and ice, and spread salt and sand.
- Haul and spread sand, gravel, and clay to fill washouts and repair road shoulders.
- Inspect, clean, and repair drainage systems, bridges, tunnels, and other structures.
- Remove litter and debris from roadways, including debris from rock and mud slides.
- Dump, spread, and tamp asphalt, using pneumatic tampers, to repair joints and patch broken pavement.
- Perform roadside landscaping work, such as clearing weeds and brush, and planting and trimming trees.
- Measure and mark locations for installation of markers, using tape, string, or chalk.
- Apply oil to road surfaces, using sprayers.
- Inspect markers to verify accurate installation.
- Place and remove snow fences used to prevent the accumulation of drifting snow on highways.
- Apply poisons along roadsides and in animal burrows to eliminate unwanted roadside vegetation and rodents.
- Paint traffic control lines and place pavement traffic messages, by hand or using machines.
- Blend compounds to form adhesive mixtures used for marker installation.
- Mix acids, chemicals, or dry cement as required for a specific job.
- Monitor pumps and flow lines for gas and fluid leaks.
- Gauge oil and gas production.
- Start compressor engines and divert oil from storage tanks into compressor units and auxiliary equipment to recover natural gas from oil.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Operate engines and pumps to shut off wells according to production schedules, and to switch flow of oil into storage tanks.
- Repair gas and oil meters and gauges.
- Perform routine maintenance on vehicles and equipment.
- Open valves to return compressed gas to bottoms of specified wells to repressurize them and force oil to surface.
- Change water filters.
- Prepare trucks and equipment necessary for the type of pumping service required.
- Attach pumps and hoses to wellheads.
- Unload and assemble pipes and pumping equipment, using hand tools.
- Supervise oil pumpers and other workers engaged in producing oil from wells.
- Drive trucks to transport high-pressure pumping equipment, and chemicals, fluids, or gases to be pumped into wells.
- Control pumping and blending equipment to acidize, cement, or fracture gas or oil wells and permeable rock formations.
- Mix acids, chemicals, or dry cement as required for a specific job.
- Direct or perform mixing or application of fertilizers, insecticides, herbicides, or fungicides.
- Establish and enforce operating procedures and work standards that will ensure adequate performance and personnel safety.
- Schedule work for crews, depending on work priorities, crew or equipment availability, or weather conditions.
- Tour grounds, such as parks, botanical gardens, cemeteries, or golf courses, to inspect conditions of plants and soil.
- Monitor project activities to ensure that instructions are followed, deadlines are met, and schedules are maintained.
- Direct activities of workers who perform duties, such as landscaping, cultivating lawns, or pruning trees and shrubs.
- Inspect completed work to ensure conformance to specifications, standards, and contract requirements.
- Plant or maintain vegetation through activities such as mulching, fertilizing, watering, mowing, or pruning.
- Train workers in tasks such as transplanting or pruning trees or shrubs, finishing cement, using equipment, or caring for turf.
- Prepare service estimates based on labor, material, and machine costs and maintain budgets for individual projects.
- Identify diseases or pests affecting landscaping and order appropriate treatments.
- Inventory supplies of tools, equipment, or materials to ensure that sufficient supplies are available and items are in usable condition.
- Maintain required records, such as personnel information or project records.
- Perform personnel-related activities, such as hiring workers, evaluating staff performance, or taking disciplinary actions when performance problems occur.
- Prepare or maintain required records, such as work activity or personnel reports.
- Investigate work-related complaints to verify problems and to determine responses.
- Perform administrative duties, such as authorizing leaves or processing time sheets.
- Confer with other supervisors to coordinate work activities with those of other departments or units.
- Direct or assist workers engaged in the maintenance or repair of equipment, such as power tools or motorized equipment.
- Review contracts or work assignments to determine service, machine, or workforce requirements for jobs.
- Order the performance of corrective work when problems occur and recommend procedural changes to avoid such problems.
- Confer with managers or landscape architects to develop plans or schedules for landscaping maintenance or improvement.
- Recommend changes in working conditions or equipment used to increase crew efficiency.
- Answer inquiries from current or prospective customers regarding methods, materials, or price ranges.
- Install or maintain landscaped areas, performing tasks such as removing snow, pouring cement curbs, or repairing sidewalks.
- Design or supervise the installation of sprinkler systems, calculating water pressure, or valve and pipe coverage needs.
- Negotiate with customers regarding fees for landscaping, lawn service, or groundskeeping work.
- Provide workers with assistance in performing duties as necessary to meet deadlines.
- Direct or perform mixing or application of fertilizers, insecticides, herbicides, or fungicides.