- Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
Occupations with related tasks Save Table: XLSX CSV
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
- Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.
- Modify existing programs to enhance efficiency.
- Write instruction sheets and cutter lists for a machine's controller to guide setup and encode numerical control tapes.
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Sort shop orders into groups to maximize materials utilization and minimize machine setup time.
- Compare encoded tapes or computer printouts with original part specifications and blueprints to verify accuracy of instructions.
- Prepare geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper.
- Perform preventative maintenance or minor repairs on machines.
- Order tooling for jobs.
- Align and secure pattern film on reference tables of optical programmers, and observe enlarger scope views of printed circuit boards.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
- Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.
- Modify existing programs to enhance efficiency.
- Write instruction sheets and cutter lists for a machine's controller to guide setup and encode numerical control tapes.
- Enter, position, and alter text size, using computers, to make up and arrange pages so that printed materials can be produced.
- Enter, store, and retrieve information on computer-aided equipment.
- Generate prepress proofs in digital or other format to approximate the appearance of the final printed piece.
- Proofread and perform quality control of text and images.
- Perform "preflight" check of required font, graphic, text and image files to ensure completeness prior to delivery to printer.
- Operate and maintain laser plate-making equipment that converts electronic data to plates without the use of film.
- Maintain, adjust, and clean equipment, and perform minor repairs.
- Operate presses to print proofs of plates, monitoring printing quality to ensure that it is adequate.
- Select proper types of plates according to press run lengths.
- Examine finished plates to detect flaws, verify conformity with master plates, and measure dot sizes and centers, using light boxes and microscopes.
- Examine unexposed photographic plates to detect flaws or foreign particles prior to printing.
- Examine photographic images for obvious imperfections prior to plate making.
- Scale copy for reductions and enlargements, using proportion wheels.
- Analyze originals to evaluate color density, gradation highlights, middle tones, and shadows, using densitometers and knowledge of light and color.
- Set scanners to specific color densities, sizes, screen rulings, and exposure adjustments, using scanner keyboards or computers.
- Correct color in photographs or digital images.
- Enter, position, and alter text size, using computers, to make up and arrange pages so that printed materials can be produced.
- Enter, store, and retrieve information on computer-aided equipment.
- Input production job settings into workstation terminals that control automated printing systems.
- Adjust digital files to alter print elements, such as fonts, graphics, or color separations.
- Start presses and pull proofs to check for ink coverage and density, alignment, and registration.
- Examine job orders to determine quantities to be printed, stock specifications, colors, or special printing instructions.
- Adjust ink fountain flow rates.
- Verify that paper and ink meet the specifications for a given job.
- Collect and inspect random samples during print runs to identify any necessary adjustments.
- Feed paper through press cylinders and adjust feed and tension controls.
- Monitor automated press operation systems and respond to fault, error, or alert messages.
- Load presses with paper and make necessary adjustments, according to paper size.
- Secure printing plates to printing units and adjust tolerances.
- Clean ink fountains, plates, or printing unit cylinders when press runs are completed.
- Change press plates, blankets, or cylinders, as required.
- Obtain or mix inks and fill ink fountains.
- Clean or oil presses or make minor repairs, using hand tools.
- Maintain time or production records.
- Monitor inventory levels on a regular basis, ordering or requesting additional supplies, as necessary.
- Monitor environmental factors, such as humidity and temperature, that may impact equipment performance and make necessary adjustments.
- Download or scan files to be printed, using printing production software.
- Direct or monitor work of press crews.
- Download completed jobs to archive media so that questions can be answered or jobs replicated.
- Control workflow scheduling or job tracking, using computer database software.
- Set up or operate auxiliary equipment, such as cutting, folding, plate-making, drilling, or laminating machines.
- Input production job settings into workstation terminals that control automated printing systems.
- Adjust digital files to alter print elements, such as fonts, graphics, or color separations.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Maintain processing, production, and inspection information and reports.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Load semiconductor material into furnace.
- Count, sort, and weigh processed items.
- Scribe or separate wafers into dice.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Key in processing instructions to program electronic equipment.
- Weigh ingredients, such as dye, to be mixed together for use in textile processing.
- Start and control machines and equipment to wash, bleach, dye, or otherwise process and finish fabric, yarn, thread, or other textile goods.
- Observe display screens, control panels, equipment, and cloth entering or exiting processes to determine if equipment is operating correctly.
- Notify supervisors or mechanics of equipment malfunctions.
- Monitor factors such as temperatures and dye flow rates to ensure that they are within specified ranges.
- Add dyes, water, detergents, or chemicals to tanks to dilute or strengthen solutions, according to established formulas and solution test results.
- Examine and feel products to identify defects and variations from coloring and other processing standards.
- Adjust equipment controls to maintain specified heat, tension, and speed.
- Soak specified textile products for designated times.
- Inspect machinery to determine necessary adjustments and repairs.
- Confer with coworkers to get information about order details, processing plans, or problems that occur.
- Sew ends of cloth together, by hand or using machines, to form endless lengths of cloth to facilitate processing.
- Ravel seams that connect cloth ends when processing is completed.
- Remove dyed articles from tanks and machines for drying and further processing.
- Study guides, charts, and specification sheets, and confer with supervisors to determine machine setup requirements.
- Prepare dyeing machines for production runs, and conduct test runs of machines to ensure their proper operation.
- Test solutions used to process textile goods to detect variations from standards.
- Record production information such as fabric yardage processed, temperature readings, fabric tensions, and machine speeds.
- Thread ends of cloth or twine through specified sections of equipment prior to processing.
- Mount rolls of cloth on machines, using hoists, or place textile goods in machines or pieces of equipment.
- Install, level, and align components such as gears, chains, dies, cutters, and needles.
- Perform machine maintenance, such as cleaning and oiling equipment, and repair or replace worn or defective parts.
- Key in processing instructions to program electronic equipment.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Maintain production records, such as quantities, types, and dimensions of materials produced.
- Start machines to verify setups, and make any necessary adjustments.
- Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
- Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
- Adjust machine controls to alter position, alignment, speed, or pressure.
- Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
- Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
- Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
- Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
- Position stock along cutting lines, or against stops on beds of scoring or cutting machines.
- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
- Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels.
- Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.
- Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
- Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
- Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
- Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
- Start pumps to circulate water and abrasives onto blades or cables during cutting.
- Direct workers on cutting teams.
- Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
- Tighten pulleys or add abrasives to maintain cutting speeds.
- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
- Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
- Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
- Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
- Wash stones, using water hoses.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Record operational information on specified production reports.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Give directions to other workers regarding machine set-up and use.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Remove completed workpieces or parts from machinery, using hand tools.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Transfer components, metal products, or assemblies, using moving equipment.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Tend auxiliary equipment used in welding processes.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Anneal finished workpieces to relieve internal stress.
- Load or feed workpieces into welding machines to join or bond components.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
