- Prepare reports on investigations or inspections and actions taken.
Occupations with related tasks Save Table: XLSX CSV
- Complete reports, including shift summaries and incident or accident reports.
- Monitor lights indicating obstructions or other trains ahead and watch for car and truck traffic at crossings to stay alert to potential hazards.
- Operate controls to open and close transit vehicle doors.
- Drive and control rail-guided public transportation, such as subways, elevated trains, and electric-powered streetcars, trams, or trolleys, to transport passengers.
- Report delays, mechanical problems, and emergencies to supervisors or dispatchers, using radios.
- Regulate vehicle speed and the time spent at each stop to maintain schedules.
- Make announcements to passengers, such as notifications of upcoming stops or schedule delays.
- Direct emergency evacuation procedures.
- Greet passengers, provide information, and answer questions concerning fares, schedules, transfers, and routings.
- Attend meetings on driver and passenger safety to learn ways in which job performance might be affected.
- Complete reports, including shift summaries and incident or accident reports.
- Prepare reports regarding any problems encountered, such as accidents, signaling problems, unscheduled stops, or delays.
- Interpret train orders, signals, or railroad rules and regulations that govern the operation of locomotives.
- Confer with conductors or traffic control center personnel via radiophones to issue or receive information concerning stops, delays, or oncoming trains.
- Receive starting signals from conductors and use controls such as throttles or air brakes to drive electric, diesel-electric, steam, or gas turbine-electric locomotives.
- Monitor gauges or meters that measure speed, amperage, battery charge, or air pressure in brake lines or in main reservoirs.
- Observe tracks to detect obstructions.
- Call out train signals to assistants to verify meanings.
- Operate locomotives to transport freight or passengers between stations or to assemble or disassemble trains within rail yards.
- Check to ensure that brake examination tests are conducted at shunting stations.
- Respond to emergency conditions or breakdowns, following applicable safety procedures and rules.
- Inspect locomotives to verify adequate fuel, sand, water, or other supplies before each run or to check for mechanical problems.
- Inspect locomotives after runs to detect damaged or defective equipment.
- Check to ensure that documentation, such as procedure manuals or logbooks, are in the driver's cab and available for staff use.
- Monitor train loading procedures to ensure that freight or rolling stock are loaded or unloaded without damage.
- Prepare reports regarding any problems encountered, such as accidents, signaling problems, unscheduled stops, or delays.
- Fill out defective equipment reports.
- Inspect trucks prior to beginning routes to ensure safe operating condition.
- Drive trucks, following established routes, through residential streets or alleys or through business or industrial areas.
- Refuel trucks or add other fluids, such as oil or brake fluid.
- Dump refuse or recyclable materials at disposal sites.
- Operate automated or semi-automated hoisting devices that raise refuse bins and dump contents into openings in truck bodies.
- Dismount garbage trucks to collect garbage and remount trucks to ride to the next collection point.
- Operate equipment that compresses collected refuse.
- Communicate with dispatchers concerning delays, unsafe sites, accidents, equipment breakdowns, or other maintenance problems.
- Check road or weather conditions to determine how routes will be affected.
- Clean trucks or compactor bodies after routes have been completed.
- Tag garbage or recycling containers to inform customers of problems, such as excess garbage or inclusion of items that are not permitted.
- Make special pickups of recyclable materials, such as food scraps, used oil, discarded computers, or other electronic items.
- Organize schedules for refuse collection.
- Fill out defective equipment reports.
- Complete accident reports when necessary.
- Collect fares or vouchers from passengers, and make change or issue receipts as necessary.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Determine fares based on trip distances and times, using taximeters and fee schedules, and announce fares to passengers.
- Drive taxicabs or privately owned vehicles to transport passengers.
- Follow relevant safety regulations and state laws governing vehicle operation, and ensure that passengers follow safety regulations.
- Notify dispatchers or company mechanics of vehicle problems.
- Perform minor vehicle repairs, such as cleaning spark plugs, or take vehicles to mechanics for servicing.
- Perform routine vehicle maintenance, such as regulating tire pressure and adding gasoline, oil, and water.
- Pick up passengers at prearranged locations, at taxi stands, or by cruising streets in high-traffic areas.
- Provide passengers with assistance entering and exiting vehicles, and help them with any luggage.
- Provide passengers with information or advice about the local area, points of interest, hotels, or restaurants.
- Report to taxicab services or garages to receive vehicle assignments.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Turn the taximeter on when passengers enter the cab, and turn it off when they reach the final destination.
- Vacuum and clean interiors and wash and polish exteriors of automobiles.
- Complete accident reports when necessary.
- Prepare accident reports.
- Control machinery to open and close canal locks and dams, railroad or highway drawbridges, or horizontally or vertically adjustable bridges.
- Direct movements of vessels in locks or bridge areas, using signals, telecommunication equipment, or loudspeakers.
- Observe position and progress of vessels to ensure best use of lock spaces or bridge opening spaces.
- Record names, types, and destinations of vessels passing through bridge openings or locks, and numbers of trains or vehicles crossing bridges.
- Observe approaching vessels to determine size and speed, and listen for whistle signals indicating desire to pass.
- Move levers to activate traffic signals, navigation lights, and alarms.
- Write and submit maintenance work requisitions.
- Log data, such as water levels and weather conditions.
- Perform maintenance duties, such as sweeping, painting, and yard work to keep facilities clean and in order.
- Turn valves to increase or decrease water levels in locks.
- Check that bridges are clear of vehicles and pedestrians prior to opening.
- Stop automobile and pedestrian traffic on bridges, and lower automobile gates prior to moving bridges.
- Raise drawbridges and observe passage of water traffic or lower drawbridges and raise automobile gates.
- Maintain and guard stations in bridges to check waterways for boat traffic.
- Clean and lubricate equipment, and make minor repairs and adjustments.
- Inspect canal and bridge equipment, and areas, such as roadbeds, for damage or defects, reporting problems to supervisors as necessary.
- Attach ropes or cable lines to bitts on lock decks or wharfs to secure vessels.
- Prepare accident reports.
- Perform legal and ethical duties, including preparing safety or accident reports, obtaining written consent from patient to perform invasive procedures, or reporting symptoms of abuse or neglect.
- Observe screen during scan to ensure that image produced is satisfactory for diagnostic purposes, making adjustments to equipment as required.
- Observe and care for patients throughout examinations to ensure their safety and comfort.
- Provide sonogram and oral or written summary of technical findings to physician for use in medical diagnosis.
- Select appropriate equipment settings and adjust patient positions to obtain the best sites and angles.
- Operate ultrasound equipment to produce and record images of the motion, shape, and composition of blood, organs, tissues, or bodily masses, such as fluid accumulations.
- Decide which images to include, looking for differences between healthy and pathological areas.
- Prepare patient for exam by explaining procedure, transferring patient to ultrasound table, scrubbing skin and applying gel, and positioning patient properly.
- Determine whether scope of exam should be extended, based on findings.
- Obtain and record accurate patient history, including prior test results or information from physical examinations.
- Maintain records that include patient information, sonographs and interpretations, files of correspondence, publications and regulations, or quality assurance records, such as pathology, biopsy, or post-operative reports.
- Record and store suitable images, using camera unit connected to the ultrasound equipment.
- Coordinate work with physicians or other healthcare team members, including providing assistance during invasive procedures.
- Clean, check, and maintain sonographic equipment, submitting maintenance requests or performing minor repairs as necessary.
- Perform clerical duties, such as scheduling exams or special procedures, keeping records, or archiving computerized images.
- Supervise or train students or other medical sonographers.
- Perform medical procedures, such as administering oxygen, inserting and removing airways, taking vital signs, or giving emergency treatment, such as first aid or cardiopulmonary resuscitation (CPR).
- Maintain stock and supplies, preparing supplies for special examinations and ordering supplies when necessary.
- Process and code film from procedures and complete appropriate documentation.
- Load and unload film cassettes used to record images from procedures.
- Perform legal and ethical duties, including preparing safety or accident reports, obtaining written consent from patient to perform invasive procedures, or reporting symptoms of abuse or neglect.
- Document and prepare reports of accidents, unscheduled stops, or delays.
- Signal engineers to begin train runs, stop trains, or change speed, using telecommunications equipment or hand signals.
- Confer with engineers regarding train routes, timetables, and cargoes, and to discuss alternative routes when there are rail defects or obstructions.
- Receive information regarding train or rail problems from dispatchers or from electronic monitoring devices.
- Receive instructions from dispatchers regarding trains' routes, timetables, and cargoes.
- Direct and instruct workers engaged in yard activities, such as switching tracks, coupling and uncoupling cars, and routing inbound and outbound traffic.
- Operate controls to activate track switches and traffic signals.
- Keep records of the contents and destination of each train car, and make sure that cars are added or removed at proper points on routes.
- Arrange for the removal of defective cars from trains at stations or stops.
- Direct engineers to move cars to fit planned train configurations, combining or separating cars to make up or break up trains.
- Inspect each car periodically during runs.
- Review schedules, switching orders, way bills, and shipping records to obtain cargo loading and unloading information and to plan work.
- Confirm routes and destination information for freight cars.
- Verify accuracy of timekeeping instruments with engineers to ensure trains depart on time.
- Instruct workers to set warning signals in front and at rear of trains during emergency stops.
- Observe yard traffic to determine tracks available to accommodate inbound and outbound traffic.
- Supervise workers in the inspection and maintenance of mechanical equipment to ensure efficient and safe train operation.
- Supervise and coordinate crew activities to transport freight and passengers and to provide boarding, porter, maid, and meal services to passengers.
- Record departure and arrival times, messages, tickets and revenue collected, and passenger accommodations and destinations.
- Inspect freight cars for compliance with sealing procedures, and record car numbers and seal numbers.
- Document and prepare reports of accidents, unscheduled stops, or delays.
- Prepare, compile, and submit reports on work activities, operations, production, or work-related accidents.
- Enforce safety rules and regulations.
- Interpret transportation or tariff regulations, shipping orders, safety regulations, or company policies and procedures for workers.
- Resolve worker problems or collaborate with employees to assist in problem resolution.
- Confer with customers, supervisors, contractors, or other personnel to exchange information or to resolve problems.
- Plan work assignments and equipment allocations to meet transportation, operations or production goals.
- Examine, measure, or weigh cargo or materials to determine specific handling requirements.
- Explain and demonstrate work tasks to new workers or assign training tasks to experienced workers.
- Review orders, production schedules, blueprints, or shipping or receiving notices to determine work sequences and material shipping dates, types, volumes, or destinations.
- Drive vehicles or operate machines or equipment to complete work assignments or to assist workers.
- Inspect or test materials, stock, vehicles, equipment, or facilities to ensure that they are safe, free of defects, and consistent with specifications.
- Maintain or verify records of time, materials, expenditures, or crew activities.
- Requisition needed personnel, supplies, equipment, parts, or repair services.
- Recommend and implement measures to improve worker motivation, equipment performance, work methods, or customer services.
- Dispatch personnel and vehicles in response to telephone or radio reports of emergencies.
- Monitor field work to ensure proper performance and use of materials.
- Recommend or implement personnel actions, such as employee selection, evaluation, rewards, or disciplinary actions.
- Perform or schedule repairs or preventive maintenance of vehicles or other equipment.
- Compute or estimate cash, payroll, transportation, personnel, or storage requirements.
- Assist workers in tasks, such as loading vehicles.
- Direct workers in transportation or related services, such as pumping, moving, storing, or loading or unloading of materials.
- Plan and establish schedules.
- Prepare, compile, and submit reports on work activities, operations, production, or work-related accidents.
- Investigate accidents or injuries and prepare reports of findings.
- Inspect, test, and measure completed work, using devices such as hand tools or gauges to verify conformance to standards or repair requirements.
- Inspect and monitor work areas, examine tools and equipment, and provide employee safety training to prevent, detect, and correct unsafe conditions or violations of procedures and safety rules.
- Interpret specifications, blueprints, or job orders to construct templates and lay out reference points for workers.
- Monitor employees' work levels and review work performance.
- Perform skilled repair or maintenance operations, using equipment such as hand or power tools, hydraulic presses or shears, or welding equipment.
- Compute estimates and actual costs of factors such as materials, labor, or outside contractors.
- Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions.
- Requisition materials and supplies, such as tools, equipment, or replacement parts.
- Confer with personnel, such as management, engineering, quality control, customer, or union workers' representatives, to coordinate work activities, resolve employee grievances, or identify and review resource needs.
- Determine schedules, sequences, and assignments for work activities, based on work priority, quantity of equipment, and skill of personnel.
- Examine objects, systems, or facilities and analyze information to determine needed installations, services, or repairs.
- Counsel employees about work-related issues and assist employees to correct job-skill deficiencies.
- Recommend or initiate personnel actions, such as hires, promotions, transfers, discharges, or disciplinary measures.
- Conduct or arrange for worker training in safety, repair, or maintenance techniques, operational procedures, or equipment use.
- Develop, implement, or evaluate maintenance policies and procedures.
- Meet with vendors or suppliers to discuss products used in repair work.
- Participate in budget preparation and administration, coordinating purchasing and documentation and monitoring departmental expenditures.
- Review, evaluate, accept, and coordinate completion of work bid from contractors.
- Compile operational or personnel records, such as time and production records, inventory data, repair or maintenance statistics, or test results.
- Develop or implement electronic maintenance programs or computer information management systems.
- Design equipment configurations to meet personnel needs.
- Investigate accidents or injuries and prepare reports of findings.
- Complete accident reports when necessary.
- Test vehicle equipment, such as lights, brakes, horns, or windshield wipers, to ensure proper operation.
- Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
- Comply with traffic regulations to operate vehicles in a safe and courteous manner.
- Follow relevant safety regulations and state laws governing vehicle operation, and ensure that passengers follow safety regulations.
- Operate vehicles with specialized equipment, such as wheelchair lifts, to transport and secure passengers with special needs.
- Report any vehicle malfunctions or needed repairs.
- Perform routine vehicle maintenance, such as regulating tire pressure and adding gasoline, oil, and water.
- Pick up and drop off passengers at regularly scheduled neighborhood locations, following strict time schedules.
- Drive shuttle busses, limousines, company cars, or privately owned vehicles to transport passengers.
- Prepare and submit reports that may include the number of passengers or trips, hours worked, mileage driven fuel consumed, or fares received.
- Notify dispatchers or company mechanics of vehicle problems.
- Provide passengers with assistance entering and exiting vehicles, and help them with any luggage.
- Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.
- Pick up or meet passengers according to requests, appointments, or schedules.
- Arrange to pick up particular customers or groups on a regular schedule.
- Report delays, accidents, or other traffic and transportation situations, using telephones or mobile two-way radios.
- Read maps and follow written and verbal geographic directions.
- Maintain knowledge of first-aid procedures.
- Regulate heating, lighting, and ventilation systems for passenger comfort.
- Record vehicle routes.
- Vacuum and clean interiors, and wash and polish exteriors of automobiles.
- Provide passengers with information or advice about the local area, points of interest, hotels, or restaurants.
- Collect fares or vouchers from passengers, and make change or issue receipts as necessary.
- Perform minor vehicle repairs, such as cleaning spark plugs, or take vehicles to mechanics for servicing.
- Perform errands for customers or employers, such as delivering or picking up mail and packages.
- Complete accident reports when necessary.
