- Operate elevator systems in conjunction with conveyor systems.
Occupations with related tasks Save Table: XLSX CSV
- Control conveyors that run the entire length of shuttle cars to distribute loads as loading progresses.
- Operate levers to move conveyor booms or shovels so that mine contents such as coal, rock, and ore can be placed into cars or onto conveyors.
- Advance machines to gather material and convey it into cars.
- Handle high voltage sources and hang electrical cables.
- Drive loaded shuttle cars to ramps and move controls to discharge loads into mine cars or onto conveyors.
- Pry off loose material from roofs and move it into the paths of machines, using crowbars.
- Move trailing electrical cables clear of obstructions, using rubber safety gloves.
- Observe hand signals, grade stakes, or other markings when operating machines.
- Examine roadway and clear obstructions from the path of travel.
- Drive machines into piles of material blasted from working faces.
- Clean, fuel, service, and perform safety checks on all equipment, and repair and replace parts as necessary.
- Clean hoppers, and clean spillage from tracks, walks, driveways, and conveyor decking.
- Oil, lubricate, and adjust conveyors, crushers, and other equipment, using hand tools and lubricating equipment.
- Monitor loading processes to ensure that materials are loaded according to specifications.
- Measure, weigh, or verify levels of rock, gravel, or other excavated material to prevent equipment overloads.
- Replace hydraulic hoses, headlight bulbs, and gathering-arm teeth.
- Stop gathering arms when cars are full.
- Move mine cars into position for loading and unloading, using pinchbars inserted under car wheels to position cars under loading spouts.
- Signal workers to move loaded cars.
- Guide and stop cars by switching, applying brakes, or placing scotches, or wooden wedges, between wheels and rails.
- Observe and record car numbers, carriers, customers, tonnages, and grades and conditions of material.
- Read written instructions or confer with supervisors about schedules and materials to be moved.
- Maintain records of materials moved.
- Direct other workers to move stakes, place blocks, position anchors or cables, or move materials.
- Push or ride cars down slopes, or hook cars to cables and control cable drum brakes, to ease cars down inclines.
- Control conveyors that run the entire length of shuttle cars to distribute loads as loading progresses.
- Operate levers to move conveyor booms or shovels so that mine contents such as coal, rock, and ore can be placed into cars or onto conveyors.
- Advance machines to gather material and convey it into cars.
- Push dual control buttons and move controls to start, stop, or adjust machinery and equipment.
- Open and close gates of belt and pneumatic conveyors on machines that are fed directly from preceding machines.
- Inspect materials and products for defects, and to ensure conformance to specifications.
- Record production and operational data, such as amount of materials processed.
- Weigh or measure materials or products to ensure conformance to specifications.
- Identify and mark materials, products, and samples, following instructions.
- Clean and maintain machinery, equipment, and work areas to ensure proper functioning and safe working conditions.
- Load materials and products into machines and equipment, or onto conveyors, using hand tools and moving devices.
- Transfer materials and products to and from machinery and equipment, using industrial trucks or hand trucks.
- Fasten, package, or stack materials and products, using hand tools and fastening equipment.
- Remove materials and products from machines and equipment, and place them in boxes, trucks or conveyors, using hand tools and moving devices.
- Shovel or scoop materials into containers, machines, or equipment for processing, storage, or transport.
- Add chemicals, solutions, or ingredients to machines or equipment as required by the manufacturing process.
- Push dual control buttons and move controls to start, stop, or adjust machinery and equipment.
- Open and close gates of belt and pneumatic conveyors on machines that are fed directly from preceding machines.
- Operate machinery used in the production process, or assist machine operators.
- Start machines or equipment to begin production processes.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Mark or tag identification on parts.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Count finished products to determine if product orders are complete.
- Examine products to verify conformance to quality standards.
- Load and unload items from machines, conveyors, and conveyances.
- Remove products, machine attachments, or waste material from machines.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Pack and store materials and products.
- Wash work areas, machines, equipment, vehicles, or products.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Prepare raw materials for processing.
- Read gauges or charts, and record data obtained.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Signal coworkers to direct them to move products during the production process.
- Position spouts or chutes of storage bins so that containers can be filled.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Break up defective products for reprocessing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Fold products and product parts during processing.
- Cut or break flashing from materials or products.
- Change machine gears, using wrenches.
- Clean and lubricate equipment.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Mix ingredients according to specified procedures or formulas.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Operate machinery used in the production process, or assist machine operators.
- Start machines or equipment to begin production processes.
- Swage fittings onto cables, using swaging machines.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Assemble prefabricated parts to form subassemblies.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Swage fittings onto cables, using swaging machines.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Operate dry-cleaning machines to clean soiled articles.
- Iron or press articles, fabrics, and furs, using hand irons or pressing machines.
- Operate extractors and driers, or direct their operation.
- Remove items from washers or dry-cleaning machines, or direct other workers to do so.
- Load articles into washers or dry-cleaning machines, or direct other workers to perform loading.
- Sort and count articles removed from dryers, and fold, wrap, or hang them.
- Start washers, dry cleaners, driers, or extractors, and turn valves or levers to regulate machine processes and the volume of soap, detergent, water, bleach, starch, and other additives.
- Examine and sort into lots articles to be cleaned, according to color, fabric, dirt content, and cleaning technique required.
- Clean machine filters, and lubricate equipment.
- Determine spotting procedures and proper solvents, based on fabric and stain types.
- Sprinkle chemical solvents over stains, and pat areas with brushes or sponges to remove stains.
- Inspect soiled articles to determine sources of stains, to locate color imperfections, and to identify items requiring special treatment.
- Apply chemicals to neutralize the effects of solvents.
- Receive and mark articles for laundry or dry cleaning with identifying code numbers or names, using hand or machine markers.
- Apply bleaching powders to spots and spray them with steam to remove stains from fabrics that do not respond to other cleaning solvents.
- Operate machines that comb, dry and polish furs, clean, sterilize and fluff feathers and blankets, or roll and package towels.
- Pre-soak, sterilize, scrub, spot-clean, and dry contaminated or stained articles, using neutralizer solutions and portable machines.
- Mix and add detergents, dyes, bleaches, starches, and other solutions and chemicals to clean, color, dry, or stiffen articles.
- Wash, dry-clean, or glaze delicate articles or fur garment linings by hand, using mild detergents or dry cleaning solutions.
- Match sample colors, applying knowledge of bleaching agent and dye properties, and types, construction, conditions, and colors of articles.
- Hang curtains, drapes, blankets, pants, and other garments on stretch frames to dry.
- Spray steam, water, or air over spots to flush out chemicals, dry material, raise naps, or brighten colors.
- Mend and sew articles, using hand stitching, adhesive patches, or sewing machines.
- Dye articles to change or restore their colors, using knowledge of textile compositions and the properties and effects of bleaches and dyes.
- Test fabrics in inconspicuous places to determine whether solvents will damage dyes or fabrics.
- Mix bleaching agents with hot water in vats, and soak material until it is bleached.
- Clean fabrics, using vacuums or air hoses.
- Start pumps to operate distilling systems that drain and reclaim dry cleaning solvents.
- Rinse articles in water and acetic acid solutions to remove excess dye and to fix colors.
- Immerse articles in bleaching baths to strip colors.
- Identify articles' fabrics and original dyes by sight and touch, or by testing samples with fire or chemical reagents.
- Spread soiled articles on work tables, and position stained portions over vacuum heads or on marble slabs.
- Deliver clean linens and clothes to clients.
- Receive supply deliveries and stock items in storage rooms.
- Operate dry-cleaning machines to clean soiled articles.
- Iron or press articles, fabrics, and furs, using hand irons or pressing machines.
- Operate or tend machines to wash and remove impurities from items such as barrels or kegs, glass products, tin plate surfaces, dried fruit, pulp, animal stock, coal, manufactured articles, plastic, or rubber.
- Add specified amounts of chemicals to equipment at required times to maintain solution levels and concentrations.
- Observe machine operations, gauges, or thermometers, and adjust controls to maintain specified conditions.
- Set controls to regulate temperature and length of cycles, and start conveyors, pumps, agitators, and machines.
- Drain, clean, and refill machines or tanks at designated intervals, using cleaning solutions or water.
- Record gauge readings, materials used, processing times, or test results in production logs.
- Examine and inspect machines to detect malfunctions.
- Measure, weigh, or mix cleaning solutions, using measuring tanks, calibrated rods or suction tubes.
- Draw samples for laboratory analysis, or test solutions for conformance to specifications, such as acidity or specific gravity.
- Adjust, clean, and lubricate mechanical parts of machines, using hand tools and grease guns.
- Load machines with objects to be processed and unload them after cleaning, placing them on conveyors or racks.
- Operate or tend machines to wash and remove impurities from items such as barrels or kegs, glass products, tin plate surfaces, dried fruit, pulp, animal stock, coal, manufactured articles, plastic, or rubber.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Select, calibrate, or operate equipment used in the non-destructive testing of products or materials.
- Interpret the results of all methods of non-destructive testing (NDT), such as acoustic emission, electromagnetic, leak, liquid penetrant, magnetic particle, neutron radiographic, radiographic, thermal or infrared, ultrasonic, vibration analysis, and visual testing.
- Interpret or evaluate test results in accordance with applicable codes, standards, specifications, or procedures.
- Identify defects in solid materials, using ultrasonic testing techniques.
- Make radiographic images to detect flaws in objects while leaving objects intact.
- Prepare reports on non-destructive testing results.
- Visually examine materials, structures, or components for signs of corrosion, metal fatigue, cracks, or other flaws, using tools and equipment such as endoscopes, closed-circuit television systems, and fiber optics.
- Examine structures or vehicles such as aircraft, trains, nuclear reactors, bridges, dams, and pipelines, using non-destructive testing techniques.
- Document non-destructive testing methods, processes, or results.
- Produce images of objects on film, using radiographic techniques.
- Supervise or direct the work of non-destructive testing trainees or staff.
- Conduct liquid penetrant tests to locate surface cracks by coating objects with fluorescent dyes, cleaning excess penetrant, and applying developer.
- Map the presence of imperfections within objects, using sonic measurements.
- Develop or use new non-destructive testing methods, such as acoustic emission testing, leak testing, and thermal or infrared testing.
- Identify defects in concrete or other building materials, using thermal or infrared testing.
- Evaluate material properties, using radio astronomy, voltage and amperage measurement, or rheometric flow measurement.
- Operate drones for remote inspection of large or hard-to-reach structures, such as wind turbines, bridges, or tall buildings.
- Select, calibrate, or operate equipment used in the non-destructive testing of products or materials.
- Guide products on conveyors to regulate flow through machines, and to discard diseased or rotten products.
- Load and unload crops or containers of materials, manually or using conveyors, handtrucks, forklifts, or transfer augers.
- Mix specified materials or chemicals, and dump solutions, powders, or seeds into planter or sprayer machinery.
- Spray fertilizer or pesticide solutions to control insects, fungus and weed growth, and diseases, using hand sprayers.
- Observe and listen to machinery operation to detect equipment malfunctions.
- Manipulate controls to set, activate, and adjust mechanisms on machinery.
- Operate or tend equipment used in agricultural production, such as tractors, combines, and irrigation equipment.
- Adjust, repair, and service farm machinery and notify supervisors when machinery malfunctions.
- Attach farm implements such as plows, discs, sprayers, or harvesters to tractors, using bolts and hand tools.
- Load hoppers, containers, or conveyors to feed machines with products, using forklifts, transfer augers, suction gates, shovels, or pitchforks.
- Direct and monitor the activities of work crews engaged in planting, weeding, or harvesting activities.
- Operate towed machines such as seed drills or manure spreaders to plant, fertilize, dust, and spray crops.
- Weigh crop-filled containers, and record weights and other identifying information.
- Walk beside or ride on planting machines while inserting plants in planter mechanisms at specified intervals.
- Drive trucks to haul crops, supplies, tools, or farm workers.
- Position boxes or attach bags at discharge ends of machinery to catch products, removing and closing full containers.
- Irrigate soil, using portable pipes or ditch systems, and maintain ditches or pipes and pumps.
- Operate drones to monitor crop health, growth and pest infestations, and apply targeted treatments.
- Guide products on conveyors to regulate flow through machines, and to discard diseased or rotten products.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Document test results, using cameras, spreadsheets, documents, or other tools.
- Read and interpret blueprints, schematics, work specifications, drawings, or charts.
- Inspect or test parts to determine nature or cause of defects or malfunctions.
- Monitor computer-controlled test equipment, according to written or verbal instructions.
- Analyze test data for automotive systems, subsystems, or component parts.
- Install equipment, such as instrumentation, test equipment, engines, or aftermarket products, to ensure proper interfaces.
- Perform or execute manual or automated tests of automotive system or component performance, efficiency, or durability.
- Maintain test equipment in operational condition by performing routine maintenance or making minor repairs or adjustments as needed.
- Analyze performance of vehicles or components that have been redesigned to increase fuel efficiency, such as camless or dual-clutch engines or alternative types of air-conditioning systems.
- Improve fuel efficiency by testing vehicles or components that use lighter materials, such as aluminum, magnesium alloy, or plastic.
- Fabricate new or modify existing prototype components or fixtures.
- Order new test equipment, supplies, or replacement parts.
- Recommend product or component design improvements, based on test data or observations.
- Recommend tests or testing conditions in accordance with designs, customer requirements, or industry standards to ensure test validity.
- Test performance of vehicles that use alternative fuels, such as alcohol blends, natural gas, liquefied petroleum gas, biodiesel, nano diesel, or alternative power methods, such as solar energy or hydrogen fuel cells.
- Participate in research or testing of computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Build instrumentation or laboratory test equipment for special purposes.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Seal outlet valves on tank cars, barges, and trucks.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Press buttons to activate cleaning equipment or machines.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Connect hoses or lines to pumps or other equipment.
- Clean the plastic work inside cars, using paintbrushes.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Press buttons to activate cleaning equipment or machines.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Compute or record photonic test data.
- Maintain clean working environments, according to clean room standards.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Assist scientists or engineers in the conduct of photonic experiments.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Monitor inventory levels and order supplies as necessary.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Optimize photonic process parameters by making prototype or production devices.
- Splice fibers, using fusion splicing or other techniques.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Repair or calibrate products, such as surgical lasers.
- Design, build, or modify fixtures used to assemble parts.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Lay out cutting lines for machining, using drafting tools.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Install, calibrate, operate, or maintain robots.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Evaluate robotic systems or prototypes.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Install, calibrate, operate, or maintain robots.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
- Develop operation, safety, and maintenance procedures or assist in their development.
- Test electrical systems to determine voltages, using voltage meters.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Weigh, measure, and record fuel used.
- Receive instructions from steam engineers regarding steam plant and air compressor operations.
- Install burners and auxiliary equipment, using hand tools.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
- Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
- Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
- Investigate and report on accidents.
- Ignite fuel in burners, using torches or flames.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Plan or conduct experiments to validate new materials, optimize startup protocols, reduce conditioning time, or examine contaminant tolerance.
- Provide technical consultation or direction related to the development or production of fuel cell systems.
- Characterize component or fuel cell performances by generating operating maps, defining operating conditions, identifying design refinements, or executing durability assessments.
- Plan or implement fuel cell cost reduction or product improvement projects in collaboration with other engineers, suppliers, support personnel, or customers.
- Conduct fuel cell testing projects, using fuel cell test stations, analytical instruments, or electrochemical diagnostics, such as cyclic voltammetry or impedance spectroscopy.
- Analyze fuel cell or related test data, using statistical software.
- Conduct post-service or failure analyses, using electromechanical diagnostic principles or procedures.
- Define specifications for fuel cell materials.
- Recommend or implement changes to fuel cell system designs.
- Validate design of fuel cells, fuel cell components, or fuel cell systems.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products.
- Develop fuel cell materials or fuel cell test equipment.
- Fabricate prototypes of fuel cell components, assemblies, stacks, or systems.
- Manage fuel cell battery hybrid system architecture, including sizing of components, such as fuel cells, energy storage units, or electric drives.
- Design or implement fuel cell testing or development programs.
- Write technical reports or proposals related to engineering projects.
- Simulate or model fuel cell, motor, or other system information, using simulation software programs.
- Design fuel cell systems, subsystems, stacks, assemblies, or components, such as electric traction motors or power electronics.
- Identify or define vehicle and system integration challenges for fuel cell vehicles.
- Calculate the efficiency or power output of a fuel cell system or process.
- Coordinate fuel cell engineering or test schedules with departments outside engineering, such as manufacturing.
- Authorize release of fuel cell parts, components, or subsystems for production.
- Evaluate the power output, system cost, or environmental impact of new hydrogen or non-hydrogen fuel cell system designs.
- Integrate electric drive subsystems with other vehicle systems to optimize performance or mitigate faults.
- Develop or evaluate systems or methods of hydrogen storage for fuel cell applications.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Analyze system performance or operational requirements.
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Develop or test photonic prototypes or models.
- Design, integrate, or test photonics systems or components.
- Assist in the transition of photonic prototypes to production.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Write reports or proposals related to photonics research or development projects.
- Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components.
- Determine applications of photonics appropriate to meet product objectives or features.
- Conduct research on new photonics technologies.
- Design electro-optical sensing or imaging systems.
- Document photonics system or component design processes, including objectives, issues, or outcomes.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Train operators, engineers, or other personnel.
- Analyze, fabricate, or test fiber-optic links.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Create or maintain photonic design histories.
- Oversee or provide expertise on manufacturing, assembly, or fabrication processes.
- Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices.
- Design solar energy photonics or other materials or devices to generate energy.
- Design or redesign optical fibers to minimize energy loss.
- Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Develop, test, or program new robots.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Program and calibrate drones for specific missions or tasks, ensuring proper functionality and performance.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
- Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
- Oversee or inspect production processes.
- Identify opportunities for improvements in quality, cost, or efficiency of automation equipment.
- Develop or implement programs to address problems related to production, materials, safety, or quality.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Create or interpret engineering drawings, schematic diagrams, formulas, or blueprints for management or engineering staff.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Recommend corrective or preventive actions to assure or improve product quality or reliability.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Select material quantities or processing methods needed to achieve efficient production.
- Monitor and adjust production processes or equipment for quality and productivity.
- Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures.
- Prepare layouts, drawings, or sketches of machinery or equipment, such as shop tooling, scale layouts, or new equipment design, using drafting equipment or computer-aided design (CAD) software.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Provide advice or training to other technicians.
- Analyze, estimate, or report production costs.
- Prepare production documents, such as standard operating procedures, manufacturing batch records, inventory reports, or productivity reports.
- Coordinate equipment purchases, installations, or transfers.
- Select cleaning materials, tools, or equipment.
- Calibrate or adjust equipment to ensure quality production, using tools such as calipers, micrometers, height gauges, protractors, or ring gauges.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Oversee equipment start-up, characterization, qualification, or release.
- Develop manufacturing infrastructure to integrate or deploy new manufacturing processes.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Develop production, inventory, or quality assurance programs.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Design plant layouts or production facilities.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.