- Examine and inspect containers, materials, or products to ensure that product quality and packing specifications are met.
Occupations with related tasks Save Table: XLSX CSV
- Inspect shipments to ensure that freight is securely braced and blocked.
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.
- Observe loading of freight to ensure that crews comply with procedures.
- Prepare and submit reports after completion of freight shipments.
- Record details about freight conditions, handling of freight, and any problems encountered.
- Advise crews in techniques of stowing dangerous and heavy cargo.
- Recommend remedial procedures to correct any violations found during inspections.
- Notify workers of any special treatment required for shipments.
- Direct crews to reload freight or to insert additional bracing or packing as necessary.
- Check temperatures and humidities of shipping and storage areas to ensure that they are at appropriate levels to protect cargo.
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.
- Read draft markings to determine depths of vessels in water.
- Post warning signs on vehicles containing explosives or flammable or radioactive materials.
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.
- Visually inspect cargo for damage upon arrival or discharge.
- Inspect shipments to ensure that freight is securely braced and blocked.
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.
- Observe loading of freight to ensure that crews comply with procedures.
- Monitor project activities to ensure that instructions are followed, deadlines are met, and schedules are maintained.
- Inspect completed work to ensure conformance to specifications, standards, and contract requirements.
- Establish and enforce operating procedures and work standards that will ensure adequate performance and personnel safety.
- Schedule work for crews, depending on work priorities, crew or equipment availability, or weather conditions.
- Tour grounds, such as parks, botanical gardens, cemeteries, or golf courses, to inspect conditions of plants and soil.
- Direct activities of workers who perform duties, such as landscaping, cultivating lawns, or pruning trees and shrubs.
- Plant or maintain vegetation through activities such as mulching, fertilizing, watering, mowing, or pruning.
- Direct or perform mixing or application of fertilizers, insecticides, herbicides, or fungicides.
- Train workers in tasks such as transplanting or pruning trees or shrubs, finishing cement, using equipment, or caring for turf.
- Prepare service estimates based on labor, material, and machine costs and maintain budgets for individual projects.
- Identify diseases or pests affecting landscaping and order appropriate treatments.
- Inventory supplies of tools, equipment, or materials to ensure that sufficient supplies are available and items are in usable condition.
- Maintain required records, such as personnel information or project records.
- Perform personnel-related activities, such as hiring workers, evaluating staff performance, or taking disciplinary actions when performance problems occur.
- Prepare or maintain required records, such as work activity or personnel reports.
- Investigate work-related complaints to verify problems and to determine responses.
- Perform administrative duties, such as authorizing leaves or processing time sheets.
- Confer with other supervisors to coordinate work activities with those of other departments or units.
- Direct or assist workers engaged in the maintenance or repair of equipment, such as power tools or motorized equipment.
- Review contracts or work assignments to determine service, machine, or workforce requirements for jobs.
- Order the performance of corrective work when problems occur and recommend procedural changes to avoid such problems.
- Confer with managers or landscape architects to develop plans or schedules for landscaping maintenance or improvement.
- Recommend changes in working conditions or equipment used to increase crew efficiency.
- Answer inquiries from current or prospective customers regarding methods, materials, or price ranges.
- Install or maintain landscaped areas, performing tasks such as removing snow, pouring cement curbs, or repairing sidewalks.
- Design or supervise the installation of sprinkler systems, calculating water pressure, or valve and pipe coverage needs.
- Negotiate with customers regarding fees for landscaping, lawn service, or groundskeeping work.
- Provide workers with assistance in performing duties as necessary to meet deadlines.
- Monitor project activities to ensure that instructions are followed, deadlines are met, and schedules are maintained.
- Inspect completed work to ensure conformance to specifications, standards, and contract requirements.
- Examine products to verify conformance to quality standards.
- Count finished products to determine if product orders are complete.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Start machines or equipment to begin production processes.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Wash work areas, machines, equipment, vehicles, or products.
- Break up defective products for reprocessing.
- Cut or break flashing from materials or products.
- Examine products to verify conformance to quality standards.
- Count finished products to determine if product orders are complete.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Determine load weights and check them against lifting capacities to prevent overload.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Weigh bundles, using floor scales, and record weights for company records.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Inspect materials and products for defects, and to ensure conformance to specifications.
- Record production and operational data, such as amount of materials processed.
- Push dual control buttons and move controls to start, stop, or adjust machinery and equipment.
- Weigh or measure materials or products to ensure conformance to specifications.
- Identify and mark materials, products, and samples, following instructions.
- Clean and maintain machinery, equipment, and work areas to ensure proper functioning and safe working conditions.
- Load materials and products into machines and equipment, or onto conveyors, using hand tools and moving devices.
- Transfer materials and products to and from machinery and equipment, using industrial trucks or hand trucks.
- Fasten, package, or stack materials and products, using hand tools and fastening equipment.
- Remove materials and products from machines and equipment, and place them in boxes, trucks or conveyors, using hand tools and moving devices.
- Shovel or scoop materials into containers, machines, or equipment for processing, storage, or transport.
- Open and close gates of belt and pneumatic conveyors on machines that are fed directly from preceding machines.
- Add chemicals, solutions, or ingredients to machines or equipment as required by the manufacturing process.
- Inspect materials and products for defects, and to ensure conformance to specifications.
- Inspect products to ensure that the quality standards and specifications are met.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Start machines, monitor operations, and make adjustments as needed.
- Adjust machine controls, such as heating mechanisms, tensions, or speeds, to produce specified products.
- Record information about work completed and machine settings.
- Notify supervisors of mechanical malfunctions.
- Inspect machinery to determine whether repairs are needed.
- Confer with coworkers to obtain information about orders, processes, or problems.
- Repair or replace worn or defective parts or components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Operate machines to cut multiple layers of fabric into parts for articles such as canvas goods, house furnishings, garments, hats, or stuffed toys.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Program electronic equipment.
- Study guides, samples, charts, and specification sheets or confer with supervisors or engineering staff to determine set-up requirements.
- Stop machines when specified amounts of product have been produced.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Inspect products to ensure that the quality standards and specifications are met.
- Check baggage or cargo to ensure that it has been loaded correctly.
- Check aircraft prior to flights to ensure that the engines, controls, instruments, and other systems are functioning properly.
- Co-pilot aircraft or perform captain's duties, as required.
- Consider airport altitudes, outside temperatures, plane weights, and wind speeds and directions to calculate the speed needed to become airborne.
- Use instrumentation to pilot aircraft when visibility is poor.
- Monitor engine operation, fuel consumption, and functioning of aircraft systems during flights.
- Order changes in fuel supplies, loads, routes, or schedules to ensure safety of flights.
- Contact control towers for takeoff clearances, arrival instructions, and other information, using radio equipment.
- Plan flights according to government and company regulations, using aeronautical charts and navigation instruments.
- Start engines, operate controls, and pilot airplanes to transport passengers, mail, or freight according to flight plans, regulations, and procedures.
- Obtain and review data such as load weights, fuel supplies, weather conditions, and flight schedules to determine flight plans and identify needed changes.
- Conduct in-flight tests and evaluations at specified altitudes and in all types of weather to determine the receptivity and other characteristics of equipment and systems.
- Choose routes, altitudes, and speeds that will provide the fastest, safest, and smoothest flights.
- Write specified information in flight records, such as flight times, altitudes flown, and fuel consumption.
- Coordinate flight activities with ground crews and air traffic control, and inform crew members of flight and test procedures.
- Perform minor aircraft maintenance and repair work, or arrange for major maintenance.
- Supervise other crew members.
- Request changes in altitudes or routes as circumstances dictate.
- File instrument flight plans with air traffic control so that flights can be coordinated with other air traffic.
- Rescue and evacuate injured persons.
- Instruct other pilots and student pilots in aircraft operations.
- Fly with other pilots or pilot-license applicants to evaluate their proficiency.
- Plan and formulate flight activities and test schedules and prepare flight evaluation reports.
- Teach company regulations and procedures to other pilots.
- Check baggage or cargo to ensure that it has been loaded correctly.
- Inspect work performed to ensure that it meets specifications and established standards.
- Supervise in-house services, such as laundries, maintenance and repair, dry cleaning, or valet services.
- Select the most suitable cleaning materials for different types of linens, furniture, flooring, and surfaces.
- Advise managers, desk clerks, or admitting personnel of rooms ready for occupancy.
- Perform or assist with cleaning duties as necessary.
- Plan and prepare employee work schedules.
- Establish and implement operational standards and procedures for the departments supervised.
- Inspect and evaluate the physical condition of facilities to determine the type of work required.
- Inventory stock to ensure that supplies and equipment are available in adequate amounts.
- Issue supplies and equipment to workers.
- Forecast necessary levels of staffing and stock at different times to facilitate effective scheduling and ordering.
- Check and maintain equipment to ensure that it is in working order.
- Maintain required records of work hours, budgets, payrolls, and other information.
- Direct activities for stopping the spread of infections in facilities, such as hospitals.
- Recommend or arrange for additional services, such as painting, repair work, renovations, and the replacement of furnishings and equipment.
- Coordinate activities with other departments to ensure that services are provided in an efficient and timely manner.
- Investigate complaints about service and equipment, and take corrective action.
- Instruct staff in work policies and procedures, and the use and maintenance of equipment.
- Select and order or purchase new equipment, supplies, or furnishings.
- Prepare reports on activity, personnel, and information, such as occupancy, hours worked, facility usage, work performed, and departmental expenses.
- Confer with staff to resolve performance and personnel problems, and to discuss company policies.
- Evaluate employee performance and recommend personnel actions, such as promotions, transfers, and dismissals.
- Recommend changes that could improve service and increase operational efficiency.
- Perform financial tasks, such as estimating costs and preparing and managing budgets.
- Screen job applicants, and hire new employees.
- Perform grounds maintenance tasks, such as removing snow and mowing the lawn.
- Inspect work performed to ensure that it meets specifications and established standards.
- Inspect loads to ensure that cargo is secure.
- Check all load-related documentation for completeness and accuracy.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
- Crank trailer landing gear up or down to safely secure vehicles.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
- Read bills of lading to determine assignment details.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
- Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
- Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Drive trucks with capacities greater than 13 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
- Read and interpret maps to determine vehicle routes.
- Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
- Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
- Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
- Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
- Remove debris from loaded trailers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Follow appropriate safety procedures for transporting dangerous goods.
- Inventory and inspect goods to be moved to determine quantities and conditions.
- Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
- Give directions to laborers who are packing goods and moving them onto trailers.
- Inspect loads to ensure that cargo is secure.
