Job Duties Custom List 51-9197.00 — Tire Builders
- Clean and paint completed tires.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
7 | 7 | 2 | 51-7021.00 | Furniture Finishers |
6 | 6 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
5 | 5 | 2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
5 | 5 | 2 | 51-9194.00 | Etchers and Engravers |
3 | 3 | 1 | 51-9123.00 | Painting, Coating, and Decorating Workers |
2 | 3 | 3 | 51-4062.00 | Patternmakers, Metal and Plastic |
2 | 2 | 2 | 51-2022.00 | Electrical and Electronic Equipment Assemblers
|
2 | 2 | 2 | 51-3011.00 | Bakers
|
2 | 2 | 2 | 51-7011.00 | Cabinetmakers and Bench Carpenters |
2 | 2 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
2 | 2 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
2 | 2 | 3 | 51-9071.00 | Jewelers and Precious Stone and Metal Workers |
1 | 14 | 1 | 51-6011.00 | Laundry and Dry-Cleaning Workers |
1 | 3 | 2 | 49-3022.00 | Automotive Glass Installers and Repairers |
1 | 3 | 2 | 51-9022.00 | Grinding and Polishing Workers, Hand |
1 | 2 | 2 | 51-4194.00 | Tool Grinders, Filers, and Sharpeners |
1 | 1 | 2 | 51-2021.00 | Coil Winders, Tapers, and Finishers |
1 | 1 | 2 | 51-2023.00 | Electromechanical Equipment Assemblers
|
1 | 1 | 2 | 51-4192.00 | Layout Workers, Metal and Plastic |
1 | 1 | 3 | 51-7031.00 | Model Makers, Wood |
1 | 1 | 3 | 51-9082.00 | Medical Appliance Technicians |
1 | 1 | 3 | 49-9064.00 | Watch and Clock Repairers |
1 | 1 | 2 | 51-2061.00 | Timing Device Assemblers and Adjusters |
1 | 1 | 1 | 51-9031.00 | Cutters and Trimmers, Hand |
1 | 1 | 2 | 51-9083.00 | Ophthalmic Laboratory Technicians |
1 | 1 | 3 | 51-7032.00 | Patternmakers, Wood |
1 | 1 | 2 | 53-7061.00 | Cleaners of Vehicles and Equipment |
1 | 1 | 3 | 51-9195.05 | Potters, Manufacturing |
1 | 1 | 2 | 51-5113.00 | Print Binding and Finishing Workers |
1 | 1 | 2 | 51-9195.00 | Molders, Shapers, and Casters, Except Metal and Plastic |
1 | 1 | 2 | 51-4121.00 | Welders, Cutters, Solderers, and Brazers |
1 | 1 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 2 | 51-9198.00 | Helpers--Production Workers |
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Remove excess solvent, using cloths soaked in paint thinner.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Wash surfaces to prepare them for finish application.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Smooth, shape, and touch up surfaces to prepare them for finishing, using sandpaper, pumice stones, steel wool, chisels, sanders, or grinders.
- Remove accessories prior to finishing, and mask areas that should not be exposed to finishing processes or substances.
- Remove old finishes and damaged or deteriorated parts, using hand tools, stripping tools, sandpaper, steel wool, abrasives, solvents, or dip baths.
- Treat warped or stained surfaces to restore original contours and colors.
- Select appropriate finishing ingredients such as paint, stain, lacquer, shellac, or varnish, depending on factors such as wood hardness and surface type.
- Mix finish ingredients to obtain desired colors or shades.
- Examine furniture to determine the extent of damage or deterioration, and to decide on the best method for repair or restoration.
- Distress surfaces with woodworking tools or abrasives before staining to create an antique appearance, or rub surfaces to bring out highlights and shadings.
- Disassemble items to prepare them for finishing, using hand tools.
- Confer with customers to determine furniture colors or finishes.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Follow blueprints to produce specific designs.
- Replace or refurbish upholstery of items, using tacks, adhesives, softeners, solvents, stains, or polish.
- Design, create, and decorate entire pieces or specific parts of furniture, such as draws for cabinets.
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Remove excess solvent, using cloths soaked in paint thinner.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Wash surfaces to prepare them for finish application.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Spray coating in specified patterns according to instructions.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Clean workpieces, using wire brushes.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Clean and maintain equipment, using water hoses and scrapers.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Install gears and holding devices on conveyor equipment.
- Preheat workpieces in ovens.
- Cut metal or other materials, using shears or band saws.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Spray coating in specified patterns according to instructions.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Clean workpieces, using wire brushes.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Apply rust-resistant undercoats and caulk and seal seams.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Apply primer over any repairs made to surfaces.
- Sand and apply sealer to properly dried finish.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Prepare and apply stencils, computer-generated decals, or other decorative items to finished products.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Apply rust-resistant undercoats and caulk and seal seams.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Apply primer over any repairs made to surfaces.
- Sand and apply sealer to properly dried finish.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
- Clean and maintain tools and equipment, using solvents, brushes, and rags.
- Read job orders and inspect workpieces to determine work procedures and materials required.
- Immerse workpieces into coating materials for specified times.
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Melt or heat coating materials to specified temperatures.
- Cut out sections in surfaces of materials to be inlaid with decorative pieces, using patterns and knives or scissors.
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Clean and finish patterns or templates, using emery cloths, files, scrapers, and power grinders.
- Paint or lacquer patterns.
- Apply plastic-impregnated fabrics or coats of sealing wax or lacquer to patterns used to produce plastic.
- Verify conformance of patterns or template dimensions to specifications, using measuring instruments such as calipers, scales, and micrometers.
- Set up and operate machine tools, such as milling machines, lathes, drill presses, and grinders, to machine castings or patterns.
- Repair and rework templates and patterns.
- Assemble pattern sections, using hand tools, bolts, screws, rivets, glue, or welding equipment.
- Read and interpret blueprints or drawings of parts to be cast or patterns to be made, compute dimensions, and plan operational sequences.
- Construct platforms, fixtures, and jigs for holding and placing patterns.
- Mark identification numbers or symbols onto patterns or templates.
- Program computerized numerical control machine tools.
- Create computer models of patterns or parts, using modeling software.
- Design and create templates, patterns, or coreboxes according to work orders, sample parts, or mockups.
- Lay out and draw or scribe patterns onto material, using compasses, protractors, rulers, scribes, or other instruments.
- Select pattern materials such as wood, resin, and fiberglass.
- Clean and finish patterns or templates, using emery cloths, files, scrapers, and power grinders.
- Paint or lacquer patterns.
- Apply plastic-impregnated fabrics or coats of sealing wax or lacquer to patterns used to produce plastic.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Paint structures as specified, using paint sprayers.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Mark and tag components so that stock inventory can be tracked and identified.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Complete, review, or maintain production, time, or component waste reports.
- Distribute materials, supplies, or subassemblies to work areas.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Instruct customers in the installation, repair, or maintenance of products.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Paint structures as specified, using paint sprayers.
- Apply glazes, icings, or other toppings to baked goods, using spatulas or brushes.
- Decorate baked goods, such as cakes or pastries.
- Check products for quality, and identify damaged or expired goods.
- Set oven temperatures, and place items into hot ovens for baking.
- Combine measured ingredients in bowls of mixing, blending, or cooking machinery.
- Place dough in pans, molds, or on sheets, and bake in production ovens or on grills.
- Set time and speed controls for mixing machines, blending machines, or steam kettles so that ingredients will be mixed or cooked according to instructions.
- Measure or weigh flour or other ingredients to prepare batters, doughs, fillings, or icings, using scales or graduated containers.
- Observe color of products being baked, and adjust oven temperatures, humidity, or conveyor speeds accordingly.
- Check the quality of raw materials to ensure that standards and specifications are met.
- Check equipment to ensure that it meets health and safety regulations, and perform maintenance or cleaning, as necessary.
- Adapt the quantity of ingredients to match the amount of items to be baked.
- Roll, knead, cut, or shape dough to form sweet rolls, pie crusts, tarts, cookies, or other products.
- Direct or coordinate bakery deliveries.
- Order or receive supplies or equipment.
- Prepare or maintain inventory or production records.
- Operate slicing or wrapping machines.
- Develop new recipes for baked goods.
- Apply glazes, icings, or other toppings to baked goods, using spatulas or brushes.
- Decorate baked goods, such as cakes or pastries.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Apply Masonite, formica, or vinyl surfacing materials.
- Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
- Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
- Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
- Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
- Establish the specifications of articles to be constructed or repaired, or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
- Reinforce joints with nails or other fasteners to prepare articles for finishing.
- Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
- Cut timber to the right size, and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Perform final touch-ups with sandpaper or steel wool.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
- Estimate the amounts, types, or costs of needed materials.
- Draw up detailed specifications and discuss projects with customers.
- Design furniture, using computer-aided drawing programs.
- Program computers to operate machinery.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Apply Masonite, formica, or vinyl surfacing materials.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Operate saw to cut remelt into sections of specified size or to cut ingots into wafers.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Mount crystal ingots or wafers on blocks or plastic laminate, using special mounting devices, to facilitate their positioning in the holding fixtures of sawing, drilling, grinding or sanding equipment.
- Attach ampoule to diffusion pump to remove air from ampoule, and seal ampoule, using blowtorch.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Locate crystal axis of ingot, and draw orientation lines on ingot, using x-ray equipment, drill, and sanding machine.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Swage fittings onto cables, using swaging machines.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Install accessories in swaging machines, using hand tools.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Splice cables, using clamps and fittings, or reweave cable strands.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Monitor robotic assembly equipment, such as snake-arm robots, used to assemble, seal, or swage aircraft structures.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Position stones and metal pieces, and set, mount, and secure items in place, using setting and hand tools.
- Smooth soldered joints and rough spots, using hand files and emery paper, and polish smoothed areas with polishing wheels or buffing wire.
- Create jewelry from materials such as gold, silver, platinum, and precious or semiprecious stones.
- Make repairs, such as enlarging or reducing ring sizes, soldering pieces of jewelry together, and replacing broken clasps and mountings.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Select and acquire metals and gems for designs.
- Compute costs of labor and materials to determine production costs of products and articles.
- Examine assembled or finished products to ensure conformance to specifications, using magnifying glasses or precision measuring instruments.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Construct preliminary models of wax, metal, clay, or plaster, and form sample castings in molds.
- Pour molten metal alloys or other materials into molds to cast models of jewelry.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Soften metal to be used in designs by heating it with a gas torch and shape it, using hammers and dies.
- Determine appraised values of diamonds and other gemstones based on price guides, market fluctuations, and stone grades and rarity.
- Grade stones based on their color, perfection, and quality of cut.
- Write or modify design specifications such as the metal contents and weights of items.
- Create new jewelry designs and modify existing designs, using computers as necessary.
- Buy and sell jewelry, or serve as agents between buyers and sellers.
- Record the weights and processing times of finished pieces.
- Lay out designs on metal stock, and cut along markings to fabricate pieces used to cast metal molds.
- Mark, engrave, or emboss designs on metal pieces such as castings, wire, or jewelry, following specifications.
- Cut designs in molds or other materials to be used as models in the fabrication of metal and jewelry products.
- Design and fabricate molds, models, and machine accessories, and modify hand tools used to cast metal and jewelry pieces.
- Research and analyze reference materials, and consult with interested parties to develop new products or modify existing designs.
- Anneal precious metal objects such as coffeepots, tea sets, and trays in gas ovens for prescribed times to soften metal for reworking.
- Weigh, mix, and melt metal alloys or materials needed for jewelry models.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Rout out locations where parts are to be joined to items, using routing machines.
- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Wash, dry-clean, or glaze delicate articles or fur garment linings by hand, using mild detergents or dry cleaning solutions.
- Load articles into washers or dry-cleaning machines, or direct other workers to perform loading.
- Start washers, dry cleaners, driers, or extractors, and turn valves or levers to regulate machine processes and the volume of soap, detergent, water, bleach, starch, and other additives.
- Operate extractors and driers, or direct their operation.
- Apply bleaching powders to spots and spray them with steam to remove stains from fabrics that do not respond to other cleaning solvents.
- Spray steam, water, or air over spots to flush out chemicals, dry material, raise naps, or brighten colors.
- Pre-soak, sterilize, scrub, spot-clean, and dry contaminated or stained articles, using neutralizer solutions and portable machines.
- Apply chemicals to neutralize the effects of solvents.
- Sprinkle chemical solvents over stains, and pat areas with brushes or sponges to remove stains.
- Operate dry-cleaning machines to clean soiled articles.
- Operate machines that comb, dry and polish furs, clean, sterilize and fluff feathers and blankets, or roll and package towels.
- Clean fabrics, using vacuums or air hoses.
- Rinse articles in water and acetic acid solutions to remove excess dye and to fix colors.
- Start pumps to operate distilling systems that drain and reclaim dry cleaning solvents.
- Remove items from washers or dry-cleaning machines, or direct other workers to do so.
- Sort and count articles removed from dryers, and fold, wrap, or hang them.
- Clean machine filters, and lubricate equipment.
- Examine and sort into lots articles to be cleaned, according to color, fabric, dirt content, and cleaning technique required.
- Receive and mark articles for laundry or dry cleaning with identifying code numbers or names, using hand or machine markers.
- Determine spotting procedures and proper solvents, based on fabric and stain types.
- Mix bleaching agents with hot water in vats, and soak material until it is bleached.
- Mix and add detergents, dyes, bleaches, starches, and other solutions and chemicals to clean, color, dry, or stiffen articles.
- Match sample colors, applying knowledge of bleaching agent and dye properties, and types, construction, conditions, and colors of articles.
- Inspect soiled articles to determine sources of stains, to locate color imperfections, and to identify items requiring special treatment.
- Iron or press articles, fabrics, and furs, using hand irons or pressing machines.
- Hang curtains, drapes, blankets, pants, and other garments on stretch frames to dry.
- Test fabrics in inconspicuous places to determine whether solvents will damage dyes or fabrics.
- Identify articles' fabrics and original dyes by sight and touch, or by testing samples with fire or chemical reagents.
- Immerse articles in bleaching baths to strip colors.
- Spread soiled articles on work tables, and position stained portions over vacuum heads or on marble slabs.
- Mend and sew articles, using hand stitching, adhesive patches, or sewing machines.
- Dye articles to change or restore their colors, using knowledge of textile compositions and the properties and effects of bleaches and dyes.
- Wash, dry-clean, or glaze delicate articles or fur garment linings by hand, using mild detergents or dry cleaning solutions.
- Load articles into washers or dry-cleaning machines, or direct other workers to perform loading.
- Start washers, dry cleaners, driers, or extractors, and turn valves or levers to regulate machine processes and the volume of soap, detergent, water, bleach, starch, and other additives.
- Operate extractors and driers, or direct their operation.
- Apply bleaching powders to spots and spray them with steam to remove stains from fabrics that do not respond to other cleaning solvents.
- Spray steam, water, or air over spots to flush out chemicals, dry material, raise naps, or brighten colors.
- Pre-soak, sterilize, scrub, spot-clean, and dry contaminated or stained articles, using neutralizer solutions and portable machines.
- Apply chemicals to neutralize the effects of solvents.
- Sprinkle chemical solvents over stains, and pat areas with brushes or sponges to remove stains.
- Operate dry-cleaning machines to clean soiled articles.
- Operate machines that comb, dry and polish furs, clean, sterilize and fluff feathers and blankets, or roll and package towels.
- Clean fabrics, using vacuums or air hoses.
- Rinse articles in water and acetic acid solutions to remove excess dye and to fix colors.
- Start pumps to operate distilling systems that drain and reclaim dry cleaning solvents.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Prime all scratches on pinchwelds with primer and allow to dry.
- Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
- Allow all glass parts installed with urethane ample time to cure, taking temperature and humidity into account.
- Apply a bead of urethane around the perimeter of each pinchweld and dress the remaining urethane on the pinchwelds so that it is of uniform level and thickness.
- Select appropriate tools, safety equipment, and parts, according to job requirements.
- Install replacement glass in vehicles.
- Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
- Replace all moldings, clips, windshield wipers, or other parts that were removed prior to glass replacement or repair.
- Remove broken or damaged glass windshields or window glass from motor vehicles, using hand tools to remove screws from frames holding glass.
- Remove moldings, clips, windshield wipers, screws, bolts, and inside A-pillar moldings and lower headliners in preparation for installation or repair work.
- Install, repair, or replace safety glass and related materials, such as back glass heating elements, on vehicles or equipment.
- Cool or warm glass in the event of temperature extremes.
- Replace or adjust motorized or manual window-raising mechanisms.
- Install new foam dams on pinchwelds, if required.
- Install rubber channeling strips around edges of glass or frames to weatherproof windows or to prevent rattling.
- Hold cut or uneven edges of glass against automated abrasive belts to shape or smooth edges.
- Cut flat safety glass according to specified patterns or perform precision pattern making and glass cutting to custom fit replacement windows.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Prime all scratches on pinchwelds with primer and allow to dry.
- Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
- Apply solutions and chemicals to equipment, objects, or parts, using hand tools.
- Wash grit from stone, using hoses.
- Verify quality of finished workpieces by inspecting them, comparing them to templates, measuring their dimensions, or testing them in working machinery.
- Measure and mark equipment, objects, or parts to ensure grinding and polishing standards are met.
- Trim, scrape, or deburr objects or parts, using chisels, scrapers, and other hand tools and equipment.
- Mark defects, such as knotholes, cracks, and splits, for repair.
- Study blueprints or layouts to determine how to lay out workpieces or saw out templates.
- Move controls to adjust, start, or stop equipment during grinding and polishing processes.
- Load and adjust workpieces onto equipment or work tables, using hand tools.
- Repair and maintain equipment, objects, or parts, using hand tools.
- Select files or other abrasives, according to materials, sizes and shapes of workpieces, amount of stock to be removed, finishes specified, and steps in finishing processes.
- File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications.
- Sharpen abrasive grinding tools, using machines and hand tools.
- Transfer equipment, objects, or parts to specified work areas, using moving devices.
- Remove completed workpieces from equipment or work tables, using hand tools, and place workpieces in containers.
- Record product and processing data on specified forms.
- Clean brass particles from files by drawing file cards through file grooves.
- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
- Apply solutions and chemicals to equipment, objects, or parts, using hand tools.
- Wash grit from stone, using hoses.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Dress grinding wheels, according to specifications.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Inspect, feel, and measure workpieces to ensure that surfaces and dimensions meet specifications.
- Study blueprints or layouts of metal workpieces to determine grinding procedures, and to plan machine setups and operational sequences.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Set up and operate grinding or polishing machines to grind metal workpieces, such as dies, parts, and tools.
- File or finish surfaces of workpieces, using prescribed hand tools.
- Perform basic maintenance, such as cleaning and lubricating machine parts.
- Remove finished workpieces from machines and place them in boxes or on racks, setting aside pieces that are defective.
- Remove and replace worn or broken machine parts, using hand tools.
- Fit parts together in pre-assembly to ensure that dimensions are accurate.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Duplicate workpiece contours, using tracer attachments.
- Inspect dies to detect defects, assess wear, and verify specifications, using micrometers, steel gauge pins, and loupes.
- Straighten workpieces and remove dents, using straightening presses and hammers.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Dress grinding wheels, according to specifications.
- Apply solutions or paints to wired electrical components, using hand tools, and bake components.
- Operate or tend wire-coiling machines to wind wire coils used in electrical components such as resistors and transformers, and in electrical equipment and instruments such as bobbins and generators.
- Attach, alter, and trim materials such as wire, insulation, and coils, using hand tools.
- Cut, strip, and bend wire leads at ends of coils, using pliers and wire scrapers.
- Review work orders and specifications to determine materials needed and types of parts to be processed.
- Select and load materials such as workpieces, objects, and machine parts onto equipment used in coiling processes.
- Record production and operational data on specified forms.
- Stop machines to remove completed components, using hand tools.
- Examine and test wired electrical components such as motors, armatures, and stators, using measuring devices, and record test results.
- Line slots with sheet insulation, and insert coils into slots.
- Disassemble and assemble motors, and repair and maintain electrical components and machinery parts, using hand tools.
- Apply solutions or paints to wired electrical components, using hand tools, and bake components.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Apply pigment to layout surfaces, using paint brushes.
- Mark curves, lines, holes, dimensions, and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
- Plan locations and sequences of cutting, drilling, bending, rolling, punching, and welding operations, using compasses, protractors, dividers, and rules.
- Fit and align fabricated parts to be welded or assembled.
- Locate center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
- Plan and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
- Lay out and fabricate metal structural parts such as plates, bulkheads, and frames.
- Compute layout dimensions, and determine and mark reference points on metal stock or workpieces for further processing, such as welding and assembly.
- Lift and position workpieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
- Design and prepare templates of wood, paper, or metal.
- Install doors, hatches, brackets, and clips.
- Brace parts in position within hulls or ships for riveting or welding.
- Inspect machined parts to verify conformance to specifications.
- Add dimensional details to blueprints or drawings made by other workers.
- Apply pigment to layout surfaces, using paint brushes.
- Finish patterns or models with protective or decorative coatings such as shellac, lacquer, or wax.
- Verify dimensions and contours of models during hand-forming processes, using templates and measuring devices.
- Read blueprints, drawings, or written specifications, and consult with designers to determine sizes and shapes of patterns and required machine setups.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and planers to cut and shape sections, parts, and patterns, according to specifications.
- Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, screws, and other fasteners.
- Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools.
- Select wooden stock, determine layouts, and mark layouts of parts on stock, using precision equipment such as scribers, squares, and protractors.
- Construct wooden models, patterns, templates, full scale mock-ups, and molds for parts of products and production tools.
- Mark identifying information on patterns, parts, and templates to indicate assembly methods and details.
- Plan, lay out, and draw outlines of units, sectional patterns, or full-scale mock-ups of products.
- Fabricate work aids such as scrapers or templates.
- Maintain pattern records for reference.
- Build jigs that can be used as guides for assembling oversized or special types of box shooks.
- Issue patterns to designated machine operators.
- Finish patterns or models with protective or decorative coatings such as shellac, lacquer, or wax.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Make orthotic or prosthetic devices, using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand or power tools.
- Bend, form, and shape fabric or material to conform to prescribed contours of structural components.
- Construct or receive casts or impressions of patients' torsos or limbs for use as cutting and fabrication patterns.
- Repair, modify, or maintain medical supportive devices, such as artificial limbs, braces, or surgical supports, according to specifications.
- Cover or pad metal or plastic structures or devices, using coverings such as rubber, leather, felt, plastic, or fiberglass.
- Test medical supportive devices for proper alignment, movement, or biomechanical stability, using meters and alignment fixtures.
- Lay out and mark dimensions of parts, using templates and precision measuring instruments.
- Fit appliances onto patients, and make any necessary adjustments.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Take patients' body or limb measurements for use in device construction.
- Instruct patients in use of prosthetic or orthotic devices.
- Service or repair machinery used in the fabrication of appliances.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Demagnetize mechanisms, using demagnetizing machines.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
- Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
- Oil moving parts of timepieces.
- Estimate repair costs and timepiece values.
- Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
- Test timepiece accuracy and performance, using meters and other electronic instruments.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Order supplies, including replacement parts, for timing instruments.
- Gather information from customers about a timepiece's problems and its service history.
- Test and replace batteries and other electronic components.
- Record quantities and types of timepieces repaired, serial and model numbers of items, work performed, and charges for repairs.
- Fabricate parts for watches and clocks, using small lathes and other machines.
- Demagnetize mechanisms, using demagnetizing machines.
- Clean and lubricate timepiece parts and assemblies, using solvents, buff sticks, and oil.
- Assemble and install components of timepieces to complete mechanisms, using watchmakers' tools and loupes.
- Observe operation of timepiece parts and subassemblies to determine accuracy of movement, and to diagnose causes of defects.
- Test operation and fit of timepiece parts and subassemblies, using electronic testing equipment, tweezers, watchmakers' tools, and loupes.
- Replace specified parts to repair malfunctioning timepieces, using watchmakers' tools, loupes, and holding fixtures.
- Disassemble timepieces such as watches, clocks, and chronometers so that repairs can be made.
- Examine components of timepieces such as watches, clocks, or chronometers for defects, using loupes or microscopes.
- Bend parts, such as hairsprings, pallets, barrel covers, and bridges, to correct deficiencies in truing or endshake, using tweezers.
- Change timing weights on balance wheels to correct deficient timing.
- Adjust sizes or positioning of timepiece parts to achieve specified fit or function, using calipers, fixtures, and loupes.
- Mount hairsprings and balance wheel assemblies between jaws of truing calipers.
- Estimate spaces between collets and first inner coils to determine if spaces are within acceptable limits.
- Bend inner coils of springs away from or toward collets, using tweezers, to locate centers of collets in centers of springs, and to correct errors resulting from faulty colleting of coils.
- Turn wheels of calipers and examine springs, using loupes, to determine if center coils appear as perfect circles.
- Examine and adjust hairspring assemblies to ensure horizontal and circular alignment of hairsprings, using calipers, loupes, and watchmakers' tools.
- Review blueprints, sketches, or work orders to gather information about tasks to be completed.
- Tighten or replace loose jewels, using watchmakers' tools.
- Clean and lubricate timepiece parts and assemblies, using solvents, buff sticks, and oil.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Fold or shape materials before or after cutting them.
- Replace or sharpen dulled cutting tools such as saws.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Adjust guides and stops to control depths and widths of cuts.
- Count or weigh and bundle items.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
- Inspect lens blanks to detect flaws, verify smoothness of surface, and ensure thickness of coating on lenses.
- Set up machines to polish, bevel, edge, or grind lenses, flats, blanks, or other precision optical elements.
- Inspect, weigh, and measure mounted or unmounted lenses after completion to verify alignment and conformance to specifications, using precision instruments.
- Shape lenses appropriately so that they can be inserted into frames.
- Mount, secure, and align finished lenses in frames or optical assemblies, using precision hand tools.
- Examine prescriptions, work orders, or broken or used eyeglasses to determine specifications for lenses, contact lenses, or other optical elements.
- Adjust lenses and frames to correct alignment.
- Select lens blanks, molds, tools, and polishing or grinding wheels, according to production specifications.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Assemble eyeglass frames and attach shields, nose pads, and temple pieces, using pliers, screwdrivers, and drills.
- Set dials and start machines to polish lenses or hold lenses against rotating wheels to polish them manually.
- Repair broken parts, using precision hand tools and soldering irons.
- Immerse eyeglass frames in solutions to harden, soften, or dye frames.
- Lay out lenses and trace lens outlines on glass, using templates.
- Control equipment that coats lenses to alter their reflective qualities.
- Remove lenses from molds and separate lenses in containers for further processing or storage.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Finish completed products or models with shellac, lacquer, wax, or paint.
- Read blueprints, drawings, or written specifications to determine sizes and shapes of patterns and required machine setups.
- Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, and screws.
- Lay out patterns on wood stock and draw outlines of units, sectional patterns, or full-scale mock-ups of products, based on blueprint specifications and sketches, and using marking and measuring devices.
- Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools.
- Divide patterns into sections according to shapes of castings to facilitate removal of patterns from molds.
- Verify dimensions of completed patterns, using templates, straightedges, calipers, or protractors.
- Correct patterns to compensate for defects in castings.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and lathes to cut and shape sections, parts, and patterns, according to specifications.
- Estimate costs for patternmaking jobs.
- Mark identifying information such as colors or codes on patterns, parts, and templates to indicate assembly methods.
- Repair broken or damaged patterns.
- Maintain pattern records for reference.
- Glue fillets along interior angles of patterns.
- Construct wooden models, templates, full scale mock-ups, jigs, or molds for shaping parts of products.
- Compute dimensions, areas, volumes, and weights.
- Select lumber to be used for patterns.
- Collect and store patterns and lumber.
- Inventory equipment and supplies, ordering parts and tools as necessary.
- Issue patterns to designated machine operators.
- Finish completed products or models with shellac, lacquer, wax, or paint.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Press buttons to activate cleaning equipment or machines.
- Connect hoses or lines to pumps or other equipment.
- Collect and test samples of cleaning solutions or vapors.
- Clean the plastic work inside cars, using paintbrushes.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Operate gas or electric kilns to fire pottery pieces.
- Raise and shape clay into wares, such as vases and pitchers, on revolving wheels, using hands, fingers, and thumbs.
- Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner.
- Position balls of clay in centers of potters' wheels, and start motors or pump treadles with feet to revolve wheels.
- Move pieces from wheels so that they can dry.
- Prepare work for sale or exhibition, and maintain relationships with retail, pottery, art, and resource networks that can facilitate sale or exhibition of work.
- Attach handles to pottery pieces.
- Press thumbs into centers of revolving clay to form hollows, and press on the inside and outside of emerging clay cylinders with hands and fingers, gradually raising and shaping clay to desired forms and sizes.
- Pack and ship pottery to stores or galleries for retail sale.
- Smooth surfaces of finished pieces, using rubber scrapers and wet sponges.
- Pull wires through bases of articles and wheels to separate finished pieces.
- Design spaces to display pottery for sale.
- Verify accuracy of shapes and sizes of objects, using calipers and templates.
- Examine finished ware for defects and measure dimensions, using rule and thickness gauge.
- Maintain supplies of tools, equipment, and materials, and order additional supplies as needed.
- Operate pug mills to blend and extrude clay.
- Perform test-fires of pottery to determine how to achieve specific colors and textures.
- Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency.
- Operate drying chambers to dry or finish molded ceramic ware.
- Adjust pressures, temperatures, and trimming tool settings as required.
- Design clay forms and molds, and decorations for forms.
- Teach pottery classes.
- Operate jigger machines to form ceramic ware, such as bowls, cups, plates, and saucers.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Apply color to edges of signatures using brushes, pads, or atomizers.
- Examine stitched, collated, bound, or unbound product samples for defects, such as imperfect bindings, ink spots, torn pages, loose pages, or loose or uncut threads.
- Read work orders to determine instructions and specifications for machine set-up.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Stitch or glue endpapers, bindings, backings, or signatures, using sewing machines, glue machines, or glue and brushes.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Maintain records, such as daily production records, using specified forms.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Set up or operate bindery machines, such as coil binders, thermal or tape binders, plastic comb binders, or specialty binders.
- Set up or operate machines that perform binding operations, such as pressing, folding, or trimming.
- Prepare finished books for shipping by wrapping or packing books and stacking boxes on pallets.
- Set up or operate glue machines by filling glue reservoirs, turning switches to activate heating elements, or adjusting glue flow or conveyor speed.
- Train workers to set up, operate, and use automatic bindery machines.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Bind new books, using hand tools such as bone folders, knives, hammers, or brass binding tools.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
- Imprint or emboss lettering, designs, or numbers on book covers, using gold, silver, or colored foil, and stamping machines.
- Compress sewed or glued signatures, using hand presses or smashing machines.
- Meet with clients, printers, or designers to discuss job requirements or binding plans.
- Form book bodies by folding and sewing printed sheets to form signatures and assembling signatures in numerical order.
- Design original or special bindings for limited editions or other custom binding projects.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Repair, restore, or rebind old, rare, or damaged books, using hand tools.
- Apply color to edges of signatures using brushes, pads, or atomizers.
- Clean, finish, and lubricate molds and mold parts.
- Read work orders or examine parts to determine parts or sections of products to be produced.
- Trim or remove excess material, using scrapers, knives, or band saws.
- Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage.
- Engrave or stamp identifying symbols, letters, or numbers on products.
- Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges.
- Separate models or patterns from molds and examine products for accuracy.
- Set the proper operating temperature for each casting.
- Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.
- Align and assemble parts to produce completed products, using gauges and hand tools.
- Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds.
- Select sizes and types of molds according to instructions.
- Patch broken edges or fractures, using clay or plaster.
- Withdraw cores or other loose mold members after castings solidify.
- Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools.
- Measure and cut products to specified dimensions, using measuring and cutting instruments.
- Smooth surfaces of molds, using scraping tools or sandpaper.
- Measure ingredients and mix molding, casting material, or sealing compounds to prescribed consistencies, according to formulas.
- Remove excess materials and level and smooth wet mold mixtures.
- Operate molding machines that compact sand in flasks to form molds.
- Place forms around models and separately immerse each half portion of a model in plaster, wax, or other mold-making materials.
- Verify dimensions of products, using measuring instruments, such as calipers, vernier gauges, or protractors.
- Bore holes or cut grates, risers, or pouring spouts in molds, using power tools.
- Locate and scribe parting lines on patterns, using measuring instruments, such as calipers, squares, or depth gauges.
- Tap or tilt molds to ensure uniform distribution of materials.
- Construct or form molds for use in casting clay or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks.
- Pour, pack, spread, or press plaster, concrete, or other materials into or around models or molds.
- Clean, finish, and lubricate molds and mold parts.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Weld components in flat, vertical, or overhead positions.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
- Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Hammer out bulges or bends in metal workpieces.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
- Use fire suppression methods in industrial emergencies.
- Preheat workpieces prior to welding or bending, using torches or heating furnaces.
- Set up and use ladders and scaffolding as necessary to complete work.
- Operate metal shaping, straightening, and bending machines, such as brakes and shears.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Clamp metal and plywood strips around dies or patterns to form molds.
- Pull level and toggle latches to fill molds, to regulate tension on sheeting, and to release mold covers.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Shape molds to specified contours, using sand, and trowels and related tools.
- Assemble shell halves, patterns, and foundry flasks, and reinforce core boxes, using glue, clamps, wire, bolts, rams, or machines.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Wash work areas, machines, equipment, vehicles, or products.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Change machine gears, using wrenches.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Fold products and product parts during processing.
- Break up defective products for reprocessing.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Cut or break flashing from materials or products.
- Wash work areas, machines, equipment, vehicles, or products.