- Replace defective components or parts, using hand tools and precision instruments.
Occupations with related tasks Save Table: XLSX CSV
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Repair or calibrate products, such as surgical lasers.
- Maintain clean working environments, according to clean room standards.
- Compute or record photonic test data.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Assist scientists or engineers in the conduct of photonic experiments.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Monitor inventory levels and order supplies as necessary.
- Monitor mechanical factors, such as turbine load or strain information.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Design, build, or modify fixtures used to assemble parts.
- Splice fibers, using fusion splicing or other techniques.
- Optimize photonic process parameters by making prototype or production devices.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Lay out cutting lines for machining, using drafting tools.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Build photonics tools to be applied to electrical grids to detect hot spots, such as failing insulators or conductors.
- Assemble devices or equipment to be used in green technology applications, including solar energy, high efficiency solid state lighting, energy management, smart buildings, or green processes.
- Develop solar power sources for lasers used in fiber optics.
- Fabricate sensors to be used to control wind turbines.
- Perform laser seam welding, heat treatment, or hard facing operations.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Repair or calibrate products, such as surgical lasers.
- Install, test, or maintain radio frequency identification device (RFID) systems.
- Identify operational requirements for new systems to inform selection of technological solutions.
- Integrate tags, readers, or software in radio frequency identification device (RFID) designs.
- Perform systems analysis or programming of radio frequency identification device (RFID) technology.
- Test radio frequency identification device (RFID) software to ensure proper functioning.
- Select appropriate radio frequency identification device (RFID) tags and determine placement locations.
- Perform site analyses to determine system configurations, processes to be impacted, or on-site obstacles to technology implementation.
- Perform acceptance testing on newly installed or updated systems.
- Determine means of integrating radio frequency identification device (RFID) into other applications.
- Provide technical support for radio frequency identification device (RFID) technology.
- Collect data about existing client hardware, software, networking, or key business processes to inform implementation of radio frequency identification device (RFID) technology.
- Test tags or labels to ensure readability.
- Determine usefulness of new radio frequency identification device (RFID) technologies.
- Verify compliance of developed applications with architectural standards and established practices.
- Train users in details of system operation.
- Develop process flows, work instructions, or standard operating procedures for radio frequency identification device (RFID) systems.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of industry research about new technologies.
- Document equipment or process details of radio frequency identification device (RFID) technology.
- Define and compare possible radio frequency identification device (RFID) solutions to inform selection for specific projects.
- Create simulations or models of radio frequency identification device (RFID) systems to provide information for selection and configuration.
- Analyze radio frequency identification device (RFID)-related supply chain data.
- Install, test, or maintain radio frequency identification device (RFID) systems.
- Design, implement, maintain, or improve electrical instruments, equipment, facilities, components, products, or systems for commercial, industrial, or domestic purposes.
- Oversee project production efforts to assure projects are completed on time and within budget.
- Direct or coordinate manufacturing, construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, codes, or customer requirements.
- Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications.
- Operate computer-assisted engineering or design software or equipment to perform engineering tasks.
- Confer with engineers, customers, or others to discuss existing or potential engineering projects or products.
- Investigate or test vendors' or competitors' products.
- Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational, safety, or environmental standards.
- Investigate customer or public complaints to determine the nature and extent of problems.
- Prepare technical drawings, specifications of electrical systems, or topographical maps to ensure that installation and operations conform to standards and customer requirements.
- Compile data and write reports regarding existing or potential electrical engineering studies or projects.
- Prepare specifications for purchases of materials or equipment.
- Estimate labor, material, or construction costs for budget preparation purposes.
- Plan or implement research methodology or procedures to apply principles of electrical theory to engineering projects.
- Supervise or train project team members, as necessary.
- Assist in developing capital project programs for new equipment or major repairs.
- Develop systems that produce electricity with renewable energy sources, such as wind, solar, or biofuels.
- Develop software to control electrical systems.
- Plan layout of electric power generating plants or distribution lines or stations.
- Integrate electrical systems with renewable energy systems to improve overall efficiency.
- Conduct field surveys or study maps, graphs, diagrams, or other data to identify and correct power system problems.
- Design electrical systems or components that minimize electric energy requirements, such as lighting systems designed to account for natural lighting.
- Collect data relating to commercial or residential development, population, or power system interconnection to determine operating efficiency of electrical systems.
- Design, implement, maintain, or improve electrical instruments, equipment, facilities, components, products, or systems for commercial, industrial, or domestic purposes.
- Engineer, install, maintain, or repair security systems, programmable logic controls, or other security-related electronic systems.
- Assess the nature and level of physical security threats so that the scope of the problem can be determined.
- Budget and schedule security design work.
- Conduct security audits to identify potential vulnerabilities related to physical security or staff safety.
- Design security policies, programs, or practices to ensure adequate security relating to alarm response, access card use, and other security needs.
- Design, implement, or establish requirements for security systems, video surveillance, motion detection, or closed-circuit television systems to ensure proper installation and operation.
- Develop conceptual designs of security systems.
- Develop or review specifications for design or construction of security systems.
- Inspect fire, intruder detection, or other security systems.
- Inspect physical security design features, installations, or programs to ensure compliance with applicable standards or regulations.
- Interview witnesses or suspects to identify persons responsible for security breaches or to establish losses, pursue prosecutions, or obtain restitution.
- Monitor tapes or digital recordings to identify the source of losses.
- Monitor the work of contractors in the design, construction, and startup phases of security systems.
- Outline system security criteria for pre-bid meetings with clients and companies to ensure comprehensiveness and appropriateness for implementation.
- Perform risk analyses so that appropriate countermeasures can be developed.
- Prepare documentation for case reports or court proceedings.
- Prepare, maintain, or update security procedures, security system drawings, or related documentation.
- Provide system design and integration recommendations.
- Recommend improvements in security systems or procedures.
- Respond to emergency situations on an on-call basis.
- Review design drawings or technical documents for completeness, correctness, or appropriateness.
- Test security measures for final acceptance and implement or provide procedures for ongoing monitoring and evaluation of the measures.
- Train personnel in security procedures or use of security equipment.
- Engineer, install, maintain, or repair security systems, programmable logic controls, or other security-related electronic systems.
- Maintain and repair materials, work sites, and equipment.
- Determine the nature of code violations and actions to be taken, and issue written notices of violation, participating in enforcement hearings, as necessary.
- Prepare, organize, and maintain inspection records.
- Investigate complaints and suspected violations regarding illegal dumping, pollution, pesticides, product quality, or labeling laws.
- Determine which sites and violation reports to investigate, and coordinate compliance and enforcement activities with other government agencies.
- Interview individuals to determine the nature of suspected violations and to obtain evidence of violations.
- Inform individuals and groups of pollution control regulations and inspection findings, and explain how problems can be corrected.
- Verify that hazardous chemicals are handled, stored, and disposed of in accordance with regulations.
- Learn and observe proper safety precautions, rules, regulations, and practices so that unsafe conditions can be recognized and proper safety protocols implemented.
- Monitor follow-up actions in cases where violations were found, and review compliance monitoring reports.
- Examine permits, licenses, applications, and records to ensure compliance with licensing requirements.
- Prepare written, oral, tabular, and graphic reports summarizing requirements and regulations, including enforcement and chain of custody documentation.
- Observe and record field conditions, gathering, interpreting, and reporting data such as flow meter readings and chemical levels.
- Determine sampling locations and methods, and collect water or wastewater samples for analysis, preserving samples with appropriate containers and preservation methods.
- Research and keep informed of pertinent information and developments in areas such as EPA laws and regulations.
- Participate in the development of spill prevention programs and hazardous waste rules and regulations, and recommend corrective actions for hazardous waste problems.
- Inspect waste pretreatment, treatment, and disposal facilities and systems for conformance to federal, state, or local regulations.
- Analyze and implement state, federal or local requirements as necessary to maintain approved pretreatment, pollution prevention, and storm water runoff programs.
- Evaluate label information for accuracy and conformance to regulatory requirements.
- Respond to questions and inquiries, such as those concerning service charges and capacity fees, or refer them to supervisors.
- Research and perform calculations related to landscape allowances, discharge volumes, production-based and alternative limits, and wastewater strength classifications, making recommendations and completing documentation.
- Perform laboratory tests on samples collected, such as analyzing the content of contaminated wastewater.
- Inform health professionals, property owners, and the public about harmful properties and related problems of water pollution and contaminated wastewater.
- Review and evaluate applications for registration of products containing dangerous materials, or for pollution control discharge permits.
- Conduct research on hazardous waste management projects to determine the magnitude of problems and treatment or disposal alternatives and costs.
- Prepare data to calculate sewer service charges and capacity fees.
- Maintain and repair materials, work sites, and equipment.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Develop, test, or program new robots.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Test and analyze thermodynamic systems for renewable energy applications, such as solar or wind, to maximize energy production.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Check, test, and maintain automatic controls and alarm systems.
- Design complete hull and superstructure according to specifications and test data, in conformity with standards of safety, efficiency, and economy.
- Supervise other engineers and crew members and train them for routine and emergency duties.
- Study design proposals and specifications to establish basic characteristics of craft, such as size, weight, speed, propulsion, displacement, and draft.
- Perform monitoring activities to ensure that ships comply with international regulations and standards for life-saving equipment and pollution preventatives.
- Oversee construction and testing of prototype in model basin and develop sectional and waterline curves of hull to establish center of gravity, ideal hull form, and buoyancy and stability data.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
- Design layout of craft interior, including cargo space, passenger compartments, ladder wells, and elevators.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
- Conduct environmental, operational, or performance tests on marine machinery and equipment.
- Inspect marine equipment and machinery to draw up work requests and job specifications.
- Prepare, or direct the preparation of, product or system layouts and detailed drawings and schematics.
- Investigate and observe tests on machinery and equipment for compliance with standards.
- Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
- Design and oversee testing, installation, and repair of marine apparatus and equipment.
- Prepare technical reports for use by engineering, management, or sales personnel.
- Procure materials needed to repair marine equipment and machinery.
- Maintain contact with, and formulate reports for, contractors and clients to ensure completion of work at minimum cost.
- Maintain and coordinate repair of marine machinery and equipment for installation on vessels.
- Confer with research personnel to clarify or resolve problems and to develop or modify designs.
- Conduct analytical, environmental, operational, or performance studies to develop designs for products, such as marine engines, equipment, and structures.
- Determine conditions under which tests are to be conducted, as well as sequences and phases of test operations.
- Review work requests and compare them with previous work completed on ships to ensure that costs are economically sound.
- Analyze data to determine feasibility of product proposals.
- Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Check, test, and maintain automatic controls and alarm systems.
- Operate and maintain audio-visual equipment.
- Sort books, publications, and other items according to established procedure and return them to shelves, files, or other designated storage areas.
- Open and close library during specified hours and secure library equipment, such as computers and audio-visual equipment.
- Locate library materials for patrons, including books, periodicals, tape cassettes, Braille volumes, and pictures.
- Enter and update patrons' records on computers.
- Answer routine inquiries and refer patrons in need of professional assistance to librarians.
- Manage reserve materials by placing items on reserve for library patrons, checking items in and out of library, and removing out-of-date items.
- Lend, reserve, and collect books, periodicals, videotapes, and other materials at circulation desks and process materials for inter-library loans.
- Instruct patrons on how to use reference sources, card catalogs, and automated information systems.
- Inspect returned books for condition and due-date status and compute any applicable fines.
- Maintain records of items received, stored, issued, and returned and file catalog cards according to system used.
- Perform clerical activities, such as answering phones, sorting mail, filing, typing, word processing, and photocopying and mailing out material.
- Register new patrons and issue borrower identification cards that permit patrons to borrow books and other materials.
- Process new materials including books, audio-visual materials, and computer software.
- Provide assistance to librarians in the maintenance of collections of books, periodicals, magazines, newspapers, and audio-visual and other materials.
- Review records, such as microfilm and issue cards, to identify titles of overdue materials and delinquent borrowers.
- Send out notices and accept fine payments for lost or overdue books.
- Maintain library equipment, such as photocopiers, scanners, and computers, and instruct patrons in proper use of such equipment.
- Schedule, supervise, and train clerical workers, volunteers, student assistants, and other library employees.
- Repair books using mending tape, paste, and brushes or prepare books to be sent to a bindery for repair.
- Take action to deal with disruptive or problem patrons.
- Prepare, store, and retrieve classification and catalog information, lecture notes, or other information related to stored documents, using computers.
- Select substitute titles when requested materials are unavailable, following criteria such as age, education, and interests.
- Prepare library statistics reports.
- Deliver and retrieve items to and from departments by hand or using push carts.
- Assist in the preparation of book displays.
- Classify and catalog items according to content and purpose.
- Operate small branch libraries, under the direction of off-site librarian supervisors.
- Plan or participate in library events and programs, such as story time with children.
- Perform accounting and bookkeeping activities, such as invoicing, maintaining financial records, budgeting, and handling cash.
- Place books in mailing containers, affix address labels, and secure containers with straps for mailing to blind library patrons.
- Design or maintain library web site and online catalogues.
- Acquire books, pamphlets, periodicals, audio-visual materials, and other library supplies by checking prices, figuring costs, and preparing appropriate order forms and facilitating the ordering process by providing such information to others.
- Operate and maintain audio-visual equipment.