- Evaluate remote sensing project requirements to determine the types of equipment or computer software necessary to meet project requirements, such as specific image types or output resolutions.
Occupations with related tasks Save Table: XLSX CSV
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Identify equipment options, such as compressors, and make appropriate selections.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Collect and record data associated with operating geothermal power plants or well fields.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Adjust power production systems to meet load and distribution demands.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Install and maintain geothermal plant electrical protection equipment.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install and maintain geothermal system instrumentation or controls.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Test water sources for factors, such as flow volume and contaminant presence.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Backfill piping trenches to protect pipes from damage.
- Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Identify equipment options, such as compressors, and make appropriate selections.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Perform monitoring activities to ensure that ships comply with international regulations and standards for life-saving equipment and pollution preventatives.
- Design complete hull and superstructure according to specifications and test data, in conformity with standards of safety, efficiency, and economy.
- Study design proposals and specifications to establish basic characteristics of craft, such as size, weight, speed, propulsion, displacement, and draft.
- Maintain contact with, and formulate reports for, contractors and clients to ensure completion of work at minimum cost.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
- Check, test, and maintain automatic controls and alarm systems.
- Prepare technical reports for use by engineering, management, or sales personnel.
- Design layout of craft interior, including cargo space, passenger compartments, ladder wells, and elevators.
- Prepare, or direct the preparation of, product or system layouts and detailed drawings and schematics.
- Inspect marine equipment and machinery to draw up work requests and job specifications.
- Conduct analytical, environmental, operational, or performance studies to develop designs for products, such as marine engines, equipment, and structures.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Investigate and observe tests on machinery and equipment for compliance with standards.
- Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
- Design and oversee testing, installation, and repair of marine apparatus and equipment.
- Conduct environmental, operational, or performance tests on marine machinery and equipment.
- Analyze data to determine feasibility of product proposals.
- Determine conditions under which tests are to be conducted, as well as sequences and phases of test operations.
- Confer with research personnel to clarify or resolve problems and to develop or modify designs.
- Review work requests and compare them with previous work completed on ships to ensure that costs are economically sound.
- Supervise other engineers and crew members and train them for routine and emergency duties.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
- Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
- Maintain and coordinate repair of marine machinery and equipment for installation on vessels.
- Oversee construction and testing of prototype in model basin and develop sectional and waterline curves of hull to establish center of gravity, ideal hull form, and buoyancy and stability data.
- Procure materials needed to repair marine equipment and machinery.
- Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.
- Develop plans for safely drydocking vessels, including structural integrity, block loading, and stability.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Evaluate traffic control devices or lighting systems to determine need for modification or expansion.
- Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion.
- Design or prepare plans for new transportation systems or parts of systems, such as airports, commuter trains, highways, streets, bridges, drainage structures, or roadway lighting.
- Check construction plans, design calculations, or cost estimations to ensure completeness, accuracy, or conformity to engineering standards or practices.
- Prepare administrative, technical, or statistical reports on traffic-operation matters, such as accidents, safety measures, or pedestrian volume or practices.
- Plan alteration or modification of existing transportation structures to improve safety or function.
- Confer with contractors, utility companies, or government agencies to discuss plans, specifications, or work schedules.
- Present data, maps, or other information at construction-related public hearings or meetings.
- Prepare final project layout drawings that include details such as stress calculations.
- Investigate traffic problems and recommend methods to improve traffic flow or safety.
- Estimate transportation project costs.
- Design or engineer drainage, erosion, or sedimentation control systems for transportation projects.
- Prepare project budgets, schedules, or specifications for labor or materials.
- Inspect completed transportation projects to ensure safety or compliance with applicable standards or regulations.
- Review development plans to determine potential traffic impact.
- Analyze environmental impact statements for transportation projects.
- Supervise the maintenance or repair of transportation systems or system components.
- Model transportation scenarios to evaluate the impacts of activities such as new development or to identify possible solutions to transportation problems.
- Inspect completed transportation projects to ensure compliance with environmental regulations.
- Participate in contract bidding, negotiation, or administration.
- Evaluate construction project materials for compliance with environmental standards.
- Direct the surveying, staking, or laying-out of construction projects.
- Design transportation systems or structures with sustainable materials or products, such as porous pavement or bioretention structures.
- Investigate or test specific construction project materials to determine compliance to specifications or standards.
- Develop or assist in the development of transportation-related computer software or computer processes.
- Develop plans to deconstruct damaged or obsolete roadways or other transportation structures in a manner that is environmentally sound or prepares the land for sustainable development.
- Develop plans for integration of drone technology into transportation systems for purposes such as delivery of goods or traffic monitoring.
- Evaluate traffic control devices or lighting systems to determine need for modification or expansion.
- Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion.
- Evaluate technical specifications to identify equipment or systems best suited for intended use and possible purchase, based on specifications, user needs, or technical requirements.
- Compute power and space requirements for installing medical, dental, or related equipment and install units to manufacturers' specifications.
- Make computations relating to load requirements of wiring or equipment, using algebraic expressions and standard formulas.
- Test or calibrate components or equipment, following manufacturers' manuals and troubleshooting techniques, using hand tools, power tools, or measuring devices.
- Perform preventive maintenance or service, such as cleaning, lubricating, or adjusting equipment.
- Inspect, test, or troubleshoot malfunctioning medical or related equipment, following manufacturers' specifications and using test and analysis instruments.
- Keep records of maintenance, repair, and required updates of equipment.
- Disassemble malfunctioning equipment and remove, repair, or replace defective parts, such as motors, clutches, or transformers.
- Examine medical equipment or facility's structural environment and check for proper use of equipment to protect patients and staff from electrical or mechanical hazards and to ensure compliance with safety regulations.
- Install medical equipment.
- Test, evaluate, and classify excess or in-use medical equipment and determine serviceability, condition, and disposition, in accordance with regulations.
- Plan and carry out work assignments, using blueprints, schematic drawings, technical manuals, wiring diagrams, or liquid or air flow sheets, following prescribed regulations, directives, or other instructions as required.
- Study technical manuals or attend training sessions provided by equipment manufacturers to maintain current knowledge.
- Explain or demonstrate correct operation or preventive maintenance of medical equipment to personnel.
- Research catalogs or repair part lists to locate sources for repair parts, requisitioning parts and recording their receipt.
- Repair shop equipment, metal furniture, or hospital equipment, including welding broken parts or replacing missing parts, or bring item into local shop for major repairs.
- Solder loose connections, using soldering iron.
- Contribute expertise to develop medical maintenance standard operating procedures.
- Fabricate, dress down, or substitute parts or major new items to modify equipment to meet unique operational or research needs, working from job orders, sketches, modification orders, samples, or discussions with operating officials.
- Supervise or advise subordinate personnel.
- Evaluate technical specifications to identify equipment or systems best suited for intended use and possible purchase, based on specifications, user needs, or technical requirements.
- Compute power and space requirements for installing medical, dental, or related equipment and install units to manufacturers' specifications.
- Make computations relating to load requirements of wiring or equipment, using algebraic expressions and standard formulas.
- Construct and evaluate electrical components for consumer electronics applications such as fuel cells for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Calculate design specifications or cost, material, and resource estimates, and prepare project schedules and budgets.
- Research equipment or component needs, sources, competitive prices, delivery times, or ongoing operational costs.
- Modify, maintain, or repair electronics equipment or systems to ensure proper functioning.
- Replace defective components or parts, using hand tools and precision instruments.
- Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems.
- Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
- Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts.
- Assemble electrical systems or prototypes, using hand tools or measuring instruments.
- Review electrical engineering plans to ensure adherence to design specifications and compliance with applicable electrical codes and standards.
- Assemble, test, or maintain circuitry or electronic components, according to engineering instructions, technical manuals, or knowledge of electronics, using hand or power tools.
- Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material.
- Maintain system logs or manuals to document testing or operation of equipment.
- Select electronics equipment, components, or systems to meet functional specifications.
- Educate equipment operators on the proper use of equipment.
- Supervise the installation or operation of electronic equipment or systems.
- Compile and maintain records documenting engineering schematics, installed equipment, installation or operational problems, resources used, repairs, or corrective action performed.
- Modify electrical prototypes, parts, assemblies, or systems to correct functional deviations.
- Integrate software or hardware components, using computer, microprocessor, or control architecture.
- Procure parts and maintain inventory and related documentation.
- Participate in training or continuing education activities to stay abreast of engineering or industry advances.
- Provide user applications or engineering support or recommendations for new or existing equipment with regard to installation, upgrades, or enhancements.
- Specify, coordinate, or conduct quality control or quality assurance programs or procedures.
- Produce electronics drawings or other graphics representing industrial control, instrumentation, sensors, or analog or digital telecommunications networks, using computer-aided design (CAD) software.
- Install or maintain electrical control systems, industrial automation systems, or electrical equipment, including control circuits, variable speed drives, or programmable logic controllers.
- Design or modify engineering schematics for electrical transmission and distribution systems or for electrical installation in residential, commercial, or industrial buildings, using computer-aided design (CAD) software.
- Interpret test information to resolve design-related problems.
- Conduct statistical studies to analyze or compare production costs for sustainable or nonsustainable designs.
- Participate in the development or testing of electrical aspects of new green technologies, such as lighting, optical data storage devices, and energy efficient televisions.
- Review, develop, or prepare maintenance standards.
- Construct and evaluate electrical components for consumer electronics applications such as fuel cells for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Calculate design specifications or cost, material, and resource estimates, and prepare project schedules and budgets.
- Research equipment or component needs, sources, competitive prices, delivery times, or ongoing operational costs.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Determine project material or equipment needs.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Determine project material or equipment needs.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Prepare project plans for equipment or facility improvements, including time lines, budgetary estimates, or capital spending requests.
- Prepare technical reports, data summary documents, or research articles for scientific publication, regulatory submissions, or patent applications.
- Design or develop medical diagnostic or clinical instrumentation, equipment, or procedures, using the principles of engineering and biobehavioral sciences.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Adapt or design computer hardware or software for medical science uses.
- Maintain databases of experiment characteristics or results.
- Develop statistical models or simulations, using statistical or modeling software.
- Read current scientific or trade literature to stay abreast of scientific, industrial, or technological advances.
- Manage teams of engineers by creating schedules, tracking inventory, creating or using budgets, or overseeing contract obligations or deadlines.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Design or conduct follow-up experimentation, based on generated data, to meet established process objectives.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Communicate with bioregulatory authorities regarding licensing or compliance responsibilities.
- Develop methodologies for transferring procedures or biological processes from laboratories to commercial-scale manufacturing production.
- Collaborate with manufacturing or quality assurance staff to prepare product specification or safety sheets, standard operating procedures, user manuals, or qualification and validation reports.
- Research new materials to be used for products, such as implanted artificial organs.
- Consult with chemists or biologists to develop or evaluate novel technologies.
- Confer with research and biomanufacturing personnel to ensure the compatibility of design and production.
- Recommend process formulas, instrumentation, or equipment specifications, based on results of bench or pilot experimentation.
- Communicate with suppliers regarding the design or specifications of bioproduction equipment, instrumentation, or materials.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Design and deliver technology, such as prosthetic devices, to assist people with disabilities.
- Advise manufacturing staff regarding problems with fermentation, filtration, or other bioproduction processes.
- Review existing manufacturing processes to identify opportunities for yield improvement or reduced process variation.
- Develop bioremediation processes to reduce pollution, protect the environment, or treat waste products.
- Lead studies to examine or recommend changes in process sequences or operation protocols.
- Design or direct bench or pilot production experiments to determine the scale of production methods that optimize product yield and minimize production costs.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Prepare project plans for equipment or facility improvements, including time lines, budgetary estimates, or capital spending requests.
- Select gear, such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.
- Test rigging to ensure safety and reliability.
- Signal or verbally direct workers engaged in hoisting and moving loads to ensure safety of workers and materials.
- Control movement of heavy equipment through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, and other equipment.
- Tilt, dip, and turn suspended loads to maneuver over, under, or around obstacles, using multi-point suspension techniques.
- Dismantle and store rigging equipment after use.
- Attach loads to rigging to provide support or prepare them for moving, using hand and power tools.
- Manipulate rigging lines, hoists, and pulling gear to move or support materials, such as heavy equipment, ships, or theatrical sets.
- Align, level, and anchor machinery.
- Load machines onto trucks to prepare for transportation.
- Attach pulleys and blocks to fixed overhead structures, such as beams, ceilings, and gin pole booms, using bolts and clamps.
- Fabricate, set up, and repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools.
- Clean and dress machine surfaces and component parts.
- Install ground rigging for yarding lines, attaching chokers to logs and to the lines.
- Select gear, such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.
- Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
- Develop safety procedures to be employed by workers operating equipment or working in close proximity to ongoing chemical reactions.
- Troubleshoot problems with chemical manufacturing processes.
- Monitor and analyze data from processes and experiments.
- Design and plan layout of equipment.
- Prepare estimate of production costs and production progress reports for management.
- Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
- Conduct research to develop new and improved chemical manufacturing processes.
- Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
- Develop processes to separate components of liquids or gases or generate electrical currents, using controlled chemical processes.
- Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
- Perform laboratory studies of steps in manufacture of new products and test proposed processes in small-scale operation, such as a pilot plant.
- Develop computer models of chemical processes.
- Direct activities of workers who operate or are engaged in constructing and improving absorption, evaporation, or electromagnetic equipment.
- Adapt processes to convert from small-scale laboratory operations to large-scale commercial production.
- Develop process flow diagrams or pipe and instrumentation diagrams.
- Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
- Inspect installation sites and study work orders, building plans, and installation manuals to determine materials requirements and installation procedures.
- Install, maintain, or repair security systems, alarm devices, or related equipment, following blueprints of electrical layouts and building plans.
- Mount and fasten control panels, door and window contacts, sensors, or video cameras, and attach electrical and telephone wiring to connect components.
- Demonstrate systems for customers and explain details, such as the causes and consequences of false alarms.
- Test and repair circuits and sensors, following wiring and system specifications.
- Feed cables through access holes, roof spaces, or cavity walls to reach fixture outlets, positioning and terminating cables, wires, or strapping.
- Examine systems to locate problems, such as loose connections or broken insulation.
- Test backup batteries, keypad programming, sirens, or other security features to ensure proper functioning or to diagnose malfunctions.
- Drill holes for wiring in wall studs, joists, ceilings, or floors.
- Consult with clients to assess risks and to determine security requirements.
- Mount raceways and conduits and fasten wires to wood framing, using staplers.
- Adjust sensitivity of units, based on room structures and manufacturers' recommendations, using programming keypads.
- Keep informed of new products and developments.
- Order replacement parts.
- Prepare documents, such as invoices or warranties.
- Provide customers with cost estimates for equipment installation.
- Inspect installation sites and study work orders, building plans, and installation manuals to determine materials requirements and installation procedures.
- Select appropriate tools, safety equipment, and parts, according to job requirements.
- Prime all scratches on pinchwelds with primer and allow to dry.
- Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
- Allow all glass parts installed with urethane ample time to cure, taking temperature and humidity into account.
- Apply a bead of urethane around the perimeter of each pinchweld and dress the remaining urethane on the pinchwelds so that it is of uniform level and thickness.
- Install replacement glass in vehicles.
- Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Replace all moldings, clips, windshield wipers, or other parts that were removed prior to glass replacement or repair.
- Remove broken or damaged glass windshields or window glass from motor vehicles, using hand tools to remove screws from frames holding glass.
- Remove moldings, clips, windshield wipers, screws, bolts, and inside A-pillar moldings and lower headliners in preparation for installation or repair work.
- Install, repair, or replace safety glass and related materials, such as back glass heating elements, on vehicles or equipment.
- Cool or warm glass in the event of temperature extremes.
- Replace or adjust motorized or manual window-raising mechanisms.
- Install new foam dams on pinchwelds, if required.
- Install rubber channeling strips around edges of glass or frames to weatherproof windows or to prevent rattling.
- Hold cut or uneven edges of glass against automated abrasive belts to shape or smooth edges.
- Cut flat safety glass according to specified patterns or perform precision pattern making and glass cutting to custom fit replacement windows.
- Select appropriate tools, safety equipment, and parts, according to job requirements.
- Determine feasibility of using standardized equipment or develop specifications for equipment required to perform additional functions.
- Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
- Maintain equipment logs that record performance problems, repairs, calibrations, or tests.
- Set up and test industrial equipment to ensure that it functions properly.
- Inspect components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.
- Install repaired equipment in various settings, such as industrial or military establishments.
- Operate equipment to demonstrate proper use or to analyze malfunctions.
- Enter information into computer to copy program or to draw, modify, or store schematics, applying knowledge of software package used.
- Perform scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Consult with customers, supervisors, or engineers to plan layout of equipment or to resolve problems in system operation or maintenance.
- Maintain inventory of spare parts.
- Study blueprints, schematics, manuals, or other specifications to determine installation procedures.
- Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems.
- Coordinate efforts with other workers involved in installing or maintaining equipment or components.
- Develop or modify industrial electronic devices, circuits, or equipment, according to available specifications.
- Advise management regarding customer satisfaction, product performance, or suggestions for product improvements.
- Send defective units to the manufacturer or to a specialized repair shop for repair.
- Sign overhaul documents for equipment replaced or repaired.
- Determine feasibility of using standardized equipment or develop specifications for equipment required to perform additional functions.
- Assess the physical security of servers, systems, or network devices to identify vulnerability to temperature, vandalism, or natural disasters.
- Collect stakeholder data to evaluate risk and to develop mitigation strategies.
- Conduct network and security system audits, using established criteria.
- Configure information systems to incorporate principles of least functionality and least access.
- Design security solutions to address known device vulnerabilities.
- Develop and execute tests that simulate the techniques of known cyber threat actors.
- Develop infiltration tests that exploit device vulnerabilities.
- Develop presentations on threat intelligence.
- Develop security penetration testing processes, such as wireless, data networks, and telecommunication security tests.
- Discuss security solutions with information technology teams or management.
- Document penetration test findings.
- Evaluate vulnerability assessments of local computing environments, networks, infrastructures, or enclave boundaries.
- Gather cyber intelligence to identify vulnerabilities.
- Identify new threat tactics, techniques, or procedures used by cyber threat actors.
- Identify security system weaknesses, using penetration tests.
- Investigate security incidents, using computer forensics, network forensics, root cause analysis, or malware analysis.
- Keep up with new penetration testing tools and methods.
- Maintain up-to-date knowledge of hacking trends.
- Prepare and submit reports describing the results of security fixes.
- Test the security of systems by attempting to gain access to networks, Web-based applications, or computers.
- Update corporate policies to improve cyber security.
- Write audit reports to communicate technical and procedural findings and recommend solutions.
- Assess the physical security of servers, systems, or network devices to identify vulnerability to temperature, vandalism, or natural disasters.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics.
- Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors.
- Maintain service records of robotic equipment or automated production systems.
- Modify computer-controlled robot movements.
- Perform preventive or corrective maintenance on robotic systems or components.
- Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
- Attach wires between controllers.
- Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Train customers or other personnel to install, use, or maintain robots.
- Build or assemble robotic devices or systems.
- Document robotics test procedures and results.
- Assist engineers in the design, configuration, or application of robotic systems.
- Install new robotic systems in stationary positions or on tracks.
- Program complex robotic systems, such as vision systems.
- Develop robotic path motions to maximize efficiency, safety, and quality.
- Fabricate housings, jigs, fittings, or fixtures, using metalworking machines.
- Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples.
- Inspect installation sites.
- Maintain inventories of robotic production supplies, such as sensors or cables.
- Develop three-dimensional simulations of automation systems.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Evaluate robotic systems or prototypes.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Install, calibrate, operate, or maintain robots.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Evaluate robotic systems or prototypes.
- Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics.
- Conduct or direct system-level automotive testing.
- Provide technical direction to other engineers or engineering support personnel.
- Perform failure, variation, or root cause analyses.
- Calibrate vehicle systems, including control algorithms or other software systems.
- Prepare or present technical or project status reports.
- Conduct research studies to develop new concepts in the field of automotive engineering.
- Establish production or quality control standards.
- Alter or modify designs to obtain specified functional or operational performance.
- Research or implement green automotive technologies involving alternative fuels, electric or hybrid cars, or lighter or more fuel-efficient vehicles.
- Develop calibration methodologies, test methodologies, or tools.
- Create design alternatives for vehicle components, such as camless or dual-clutch engines or alternative air-conditioning systems, to increase fuel efficiency.
- Develop or implement operating methods or procedures.
- Develop engineering specifications or cost estimates for automotive design concepts.
- Conduct automotive design reviews.
- Design vehicles that use lighter materials, such as aluminum, magnesium alloy, or plastic, to improve fuel efficiency.
- Write, review, or maintain engineering documentation.
- Develop specifications for vehicles powered by alternative fuels or alternative power methods.
- Build models for algorithm or control feature verification testing.
- Coordinate production activities with other functional units, such as procurement, maintenance, or quality control.
- Design control systems or algorithms for purposes such as automotive energy management, emissions management, or increased operational safety or performance.
- Develop or integrate control feature requirements.
- Research computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products.
- Design vehicles for increased recyclability or use of natural, renewable, or recycled materials in vehicle construction.
- Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Recommend design modifications to eliminate machine or system malfunctions.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Provide technical customer service.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Provide feedback to design engineers on customer problems or needs.
- Write performance requirements for product development or engineering projects.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design test control apparatus or equipment or develop procedures for testing products.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Solicit new business.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Evaluate the operation and maintenance of water or wastewater systems to identify ways to improve their efficiency.
- Provide technical direction or supervision to junior engineers, engineering or computer-aided design (CAD) technicians, or other technical personnel.
- Review and critique proposals, plans, or designs related to water or wastewater treatment systems.
- Design domestic or industrial water or wastewater treatment plants, including advanced facilities with sequencing batch reactors (SBR), membranes, lift stations, headworks, surge overflow basins, ultraviolet disinfection systems, aerobic digesters, sludge lagoons, or control buildings.
- Design or select equipment for use in wastewater processing to ensure compliance with government standards.
- Design pumping systems, pumping stations, pipelines, force mains, or sewers for the collection of wastewater.
- Design water distribution systems for potable or non-potable water.
- Conduct water quality studies to identify and characterize water pollutant sources.
- Analyze and recommend chemical, biological, or other wastewater treatment methods to prepare water for industrial or domestic use.
- Identify design alternatives for the development of new water resources.
- Design water runoff collection networks, water supply channels, or water supply system networks.
- Design water or wastewater lift stations, including water wells.
- Conduct cost-benefit analyses for the construction of water supply systems, runoff collection networks, water and wastewater treatment plants, or wastewater collection systems.
- Provide technical support on water resource or treatment issues to government agencies.
- Conduct feasibility studies for the construction of facilities, such as water supply systems, runoff collection networks, water and wastewater treatment plants, or wastewater collection systems.
- Analyze storm water or floodplain drainage systems to control erosion, stabilize river banks, repair channel streams, or design bridges.
- Oversee the construction of decentralized or on-site wastewater treatment systems, including reclaimed water facilities.
- Develop plans for new water resources or water efficiency programs.
- Perform hydrological analyses, using three-dimensional simulation software, to model the movement of water or forecast the dispersion of chemical pollutants in the water supply.
- Perform hydraulic analyses of water supply systems or water distribution networks to model flow characteristics, test for pressure losses, or to identify opportunities to mitigate risks and improve operational efficiency.
- Write technical reports or publications related to water resources development or water use efficiency.
- Design water storage tanks or other water storage facilities.
- Analyze and recommend sludge treatment or disposal methods.
- Design sludge treatment plants.
- Gather and analyze water use data to forecast water demand.
- Conduct environmental impact studies related to water and wastewater collection, treatment, or distribution.
- Analyze the efficiency of water delivery structures, such as dams, tainter gates, canals, pipes, penstocks, or cofferdams.
- Perform mathematical modeling of underground or surface water resources, such as floodplains, ocean coastlines, streams, rivers, or wetlands.
- Evaluate the operation and maintenance of water or wastewater systems to identify ways to improve their efficiency.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Develop, test, or program new robots.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Program and calibrate drones for specific missions or tasks, ensuring proper functionality and performance.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Verify that well field monitoring data conforms to applicable regulations.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Designate cables available for use.
- Demonstrate equipment to customers and explain its use, responding to any inquiries or complaints.
- Test circuits and components of malfunctioning telecommunications equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
- Test repaired, newly installed, or updated equipment to ensure that it functions properly and conforms to specifications, using test equipment and observation.
- Climb poles and ladders, use truck-mounted booms, and enter areas such as manholes and cable vaults to install, maintain, or inspect equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Run wires between components and to outside cable systems, connecting them to wires from telephone poles or underground cable accesses.
- Test connections to ensure that power supplies are adequate and that communications links function.
- Note differences in wire and cable colors so that work can be performed correctly.
- Inspect equipment on a regular basis to ensure proper functioning.
- Collaborate with other workers to locate and correct malfunctions.
- Remove loose wires and other debris after work is completed.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Maintain computer and manual records pertaining to facilities and equipment.
- Communicate with bases, using telephones or two-way radios to receive instructions or technical advice, or to report equipment status.
- Remove and remake connections to change circuit layouts, following work orders or diagrams.
- Clean and maintain tools, test equipment, and motor vehicles.
- Perform database verifications, using computers.
- Request support from technical service centers when on-site procedures fail to solve installation or maintenance problems.
- Analyze test readings, computer printouts, and trouble reports to determine equipment repair needs and required repair methods.
- Adjust or modify equipment to enhance equipment performance or to respond to customer requests.
- Remove and replace plug-in circuit equipment.
- Refer to manufacturers' manuals to obtain maintenance instructions pertaining to specific malfunctions.
- Dig holes or trenches as necessary for equipment installation and access.
- Review manufacturer's instructions, manuals, technical specifications, building permits, and ordinances to determine communication equipment requirements and procedures.
- Drive crew trucks to and from work areas.
- Route and connect cables and lines to switches, switchboard equipment, and distributing frames, using wire-wrap guns or soldering irons to connect wires to terminals.
- Diagnose and correct problems from remote locations, using special switchboards to find the sources of problems.
- Program computerized switches and switchboards to provide requested features.
- Enter codes needed to correct electronic switching system programming.
- Examine telephone transmission facilities to determine requirements for new or additional telephone services.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Install updated software and programs that maintain existing software or provide requested features, such as time-correlated call routing.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Determine viability of sites through observation, and discuss site locations and construction requirements with customers.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Provide input into the design and manufacturing of new equipment.
- Address special issues or situations, such as illegal or unauthorized use of equipment, or cases of electrical or acoustic shock.
- Designate cables available for use.
